Search

Simple Summary: During overwintering diapause, the gynes of paper wasps (Polistes sp.) are mainly dormant in sheltered hibernacles, protecting them against predators and adverse weather conditions but hardly against low temperatures. By measuring the temperature inside hibernacles occupied by species from both Mediterranean (Italian; P. dominula, P. gallicus) and temperate (Austrian; P. dominula) climates (mean hibernacle temperatures: 8.5 °C and 3.2 °C, respectively), we were able to calculate the energetic demand of overwintering. The cumulative energetic costs differed between the populations. Costs were lowest for the P. dominula population from the cooler Austrian winter climate and significantly higher in P. dominula and P. gallicus from the warmer Italian climate. The lower costs of the temperate species were a result of the lower winter temperature and physiological acclimation processes. Energetic calculations with an assumed temperature increase of up to 3 °C due to climate change predict a dramatic increase of up to 40% in overwintering costs in all species. Gynes of paper wasps (Polistes sp.) spend the cold season in sheltered hibernacles. These hibernacles protect against predators and adverse weather conditions but offer only limited protection against low temperatures. During overwintering diapause, wasps live on the energy they store. We investigated the hibernacles' microclimate conditions of species from the Mediterranean (Italy, P. dominula, P. gallicus) and temperate (Austria, P. dominula) climates in order to describe the environmental conditions and calculate the energetic demand of overwintering according to standard metabolic rate functions. The temperatures at the hibernacles differed significantly between the Mediterranean and temperate habitats (average in Austria: 3.2 ± 5.71 °C, in Italy: 8.5 ± 5.29 °C). In both habitats, the hibernacle temperatures showed variance, but the mean hibernacle temperature corresponded closely to the meteorological climate data. Cumulative mass-specific energetic costs over the studied period were the lowest for the temperate P. dominula population compared with both Mediterranean species. The lower costs of the temperate species were a result of the lower hibernacle temperature and acclimation to lower environmental temperatures. Model calculations with an increased mean temperature of up to 3 °C due to climate change indicate a dramatic increase of up to 40% in additional costs. [ABSTRACT FROM AUTHOR]

Climate change and the resulting higher frequency of extreme weather events have a direct negative impact on mental health. Natural disasters are particularly associated with an increase in the prevalence of depression, anxiety and posttraumatic stress disorder. Indirect consequences of climate change, such as food shortages, economic crises, violent conflicts and forced migration, additionally represent severe psychological risk and stress factors. Climate anxiety and solastalgia, the distress induced by environmental change, are new psychological syndromes in the face of the existential threat posed by the climate crisis. Accordingly, a sustainable psychiatry must prepare for increasing and changing demands. The principles of psychiatric treatment need to focus more on prevention to reduce the overall burden on the healthcare system. Waste of resources and CO2 emissions in psychiatric treatment processes as well as infrastructure must be perceived and prevented. Psychiatric education, training and continuing education concepts should be expanded to include the topic of climate change in order to comprehensively inform and sensitize professionals, those affected and the public and to encourage climate-friendly and health-promoting behavior. More in-depth research is needed on the impact of climate change on mental health. The DGPPN becomes a sponsor and aims for climate neutrality by 2030 by committing to climate-friendly and energy-saving measures in the area of finance, in relation to the DGPPN congress as well as the DGPPN office. [ABSTRACT FROM AUTHOR]

Bamboo has being used as alternative raw material for construction, reinforcing fibers, paper production, among other applications. Although its recognized potentials as raw material, there are doubts about its environmental performance compared to traditional wood-based products, including paper production, which hinders bamboo-based paper plants in large scales. This study aims to assess the environmental performance of producing office paper from bamboo. Emergy synthesis (with 'm') and global warming potential indicators are calculated and compared with the traditional eucalyptus paper-based production. Results highlights the importance in including the renewability fractions of each input resources into emergy calculations for production systems with high human-labor intensity such as the bamboo agricultural production. Office paper produced from bamboo has similar renewability (28%), moderate environmental load (3.23 vs. 2.49), and emergy unsustainability (0.34 vs. 0.60) compared to paper produced from eucalyptus, but bamboo showed lower performance for global efficiency (568 vs. 442 sej/ton paper), emergy yield (1.09 vs. 1.49), and emergy investment (10.79 vs. 2.05). Focusing on global warming potential, office paper produced from bamboo releases 98 kgCO 2 eq. /ton paper compared to 56–267 kgCO 2 eq. /ton paper for eucalyptus. Notwithstanding, bamboo-based office paper demands four times more land area of agricultural production than eucalyptus, but it has a positive social aspect by requiring higher amount of direct human labor. This work shows the advantages of using eucalyptus rather than bamboo in producing office paper from an emergy and land demand perspectives, while global warming can still be considered inconclusive. Future efforts should consider a quantitative and qualitative analysis of human labor availability in both systems, as well an economic analysis to support discussions towards more sustainable office paper production from different raw materials. • Environmental load of bamboo and eucalyptus for office paper production are compared. • Bamboo has lower emergy performance than eucalyptus. • Including the renewability fraction of labor and services better reflects emergy results. • Bamboo paper emits 98kgCO2eq/ton, eucalyptus paper emits 56–267kgCO2eq/ton. • Bamboo paper needs 4x land compared to eucalyptus and requires more human labor. [ABSTRACT FROM AUTHOR]

A recent article in Development explores the molecular mechanisms behind embryonic diapause, a state of suspended development induced by nutrient deprivation. The study, conducted on mice, reveals that protein and carbohydrate depletion activate the nutrient sensors Gator1 and Tsc2, leading to embryonic diapause. The researchers also discuss the potential applicability of their findings to other mammalian species, including primates. The study expands our understanding of the role of mTOR in diapause and sheds light on how environmental stresses inhibit mTORC1 activity. [Extracted from the article]

Abstract Although paper production demonstrates high energy and water sensitivity in their life cycles, only a few systematic analyses have focused on these issues. Therefore, an energy and carbon coupled water footprint analysis of five types of Kraft wood pulp-based paper (i.e., specialty-, art-, household-, light coated-, and tissue paper) is conducted in this study to help improve the environmental performance of the paper industry. All investigations are conducted with an impact-oriented approach based on ISO standards. Results show that elemental-chlorine-free bleaching is more environmentally friendly than chlorination-alkaline extraction-hypochlorite bleaching, specifically for global warming, aquatic eutrophication, and human health (i.e., carcinogens and non-carcinogens). Gray water footprint along whole life cycles of each product is approximately twice of blue water footprint. Direct processes contribute approximately 50% to water scarcity, while their impact on aquatic eutrophication ranges from 0.002% to 50.72%. For other midpoints, indirect processes dominate the influences. Meanwhile, COD, BOD 5 , CO 2 , TP, Cr (Ⅵ), Ti, Hg, and As are key contributors. Finally, reusing sludge by direct burning in the recovery furnace, reclaiming organic compounds in black liquor before alkali recycling, and integrating black liquor gasification technology are expected to provide substantial environmental benefits. Amelioration of wastewater treatment, optimization of the national energy structure, and improvement of the efficiency of chemicals and freshwater are recommended. Highlights • Energy and carbon coupled water footprint analysis of Kraft pulp paper is applied. • The environmental benefit of black liquor recovery is dominated by reused alkali. • Direct processes contribute a lot to water scarcity and aquatic eutrophication. • COD, BOD, TP, and heavy metals are key substances. • Optimizing waste reuse and availability efficiency of chemicals is recommended. [ABSTRACT FROM AUTHOR]

The diagnosis of dengue infection is still a critical factor determining success in the clinical management and treatment of patients. Here, the development of microfluidic paper-based analytical devices (μPADs) utilizing a sandwich immunoassay on wax patterned paper functionalized with anti-dengue NS1 monoclonal antibodies for point-of-care detection of dengue NS1 (DEN-NS1-PAD) is reported. Various assay conditions, including the length of the channel and diluent, were optimized, and the response detected by the naked eye and digitized images within 20–30 min. The DEN-NS1-PAD was successfully tested in the field for detecting dengue NS1 in buffer, cell culture media, and human serum. The limit of detection (LoD) of the DEN-NS1-PAD obtained with the naked eye, scanner, and a smartphone camera was 200, 46.7, and 74.8 ng mL−1, respectively. The repeatability, reproducibility, and stability of the DEN-NS1-PAD were also evaluated. High true specificity and sensitivity in the serum of pediatric patients were observed. These evaluation results confirm that the DEN-NS1-PAD can potentially be used in point-of-care dengue diagnostics, which can significantly impact on the spreading of mosquito-borne diseases, which are likely to become more prevalent with the effects of global warming. [ABSTRACT FROM AUTHOR]

Aeration, as a process in pulp and paper wastewater treatment, uses the greatest share of the energy. Therefore, if the energy efficiency of the treatment has to be improved, the focus must be on aeration. A key finding from the trials conducted for this paper, with effluent from a paper and pulp mill, was that the oxygen transfer coefficient could be doubled and the chemical oxygen demand could be decreased by 25%, if the effluent was pre-treated with 30 mg/l of aluminium coagulant (equivalent to 9.4 tonnes per day of AVR to 20000 cubic metres of effluent). Decrease in oxygen requirement implies decreases in aeration energy use. Pulp and paper mill effluents are not as biodegradable as municipal sewage, and the improvement in oxygen transfer properties of the effluent will have a positive influence over a longer period of time in the biological treatment. If the sludge is digested anaerobically, pre-treatment will also result in doubling the potential for methane generation. A holistic analysis of modifications to processes entails a study of the economic and environmental consequences as well. While the economic aspect is beyond the scope of this paper, only the net global warming as an environmental impact category has been studied, by taking recourse to specific emission coefficients. Of the four dosages of ferric aluminium sulphate considered in this analysis, the net greenhouse gas emissions are the least – 426 kg carbon dioxide equivalent per day when the daily consumption is 9.4 tonnes. [ABSTRACT FROM AUTHOR]

This study assesses the policy/legal status of both multistream residues and potential secondary products ('symbiosis products') and whether there could be environmental benefits associated with the utilization of residues from integrated pulp and paper and carbon steel mills as raw materials for such secondary products. Waste-related European Union (EU) and Finnish policy and legal instruments were reviewed to identify potential constraints for, and suggested next steps in, the development of potential process industry residue-based symbiosis products. The products were soil amendment pellets, low-grade concrete, and mine filler. A global warming potential (GWP) assessment and an exergy analysis were applied to these potential symbiosis products. Some indicative GWP calculations of greenhouse gas emissions associating similar and/or analogous products based on virgin primary raw materials, more energy-intensive processes, and the alternative treatment of these residues as wastes are also presented. This study addresses GWP, exergy, and legal aspects in a holistic manner to determine the potential environmental benefits of secondary products within the EU legal framework. The GWP assessment and exergy analysis indicate that the utilization of multistream residues causes very low environmental burdens in terms of GWP. The utilization option can have potential environmental benefits in terms of GWP through process replacement and avoided landfilling and waste treatment impacts, as well as potentially through emission reductions from product replacement if suitable and safe applications can be identified. Waste regulation does not define the legal requirements under which utilizing residues in such novel concepts as introduced in this study would be possible, nor how waste status could be removed and product-based legislation be applied to the potential products instead. [ABSTRACT FROM AUTHOR]

Global warming is causing unprecedented changes to permafrost regions with amplified effects in the Arctic through a phenomenon known as Arctic amplification. This intensified climate warming thaws both the discontinuous and continuous permafrost resulting in changes in the mechanical properties of the soils found in these regions. Since permafrost regions constitute nearly 24% of the Northern Hemisphere, understanding the strength of soils in thawed conditions is essential to analyze the stability of existing structures, and to design safer and more economical infrastructure in these regions. Specifically, thawing of the permafrost is causing considerable reductions in its strength of soils, which may lead to massive landslides, foundation failures, and so forth. Since frozen soil is a multiphase structure that consists of soil particles, unfrozen water, ice, and air, each constituent will influence the mechanical properties. This paper reviews the current state of knowledge of the impact of temperature, volumetric ice content, unfrozen water content, and frozen density on the compressive strength, peak shear strength, residual shear strength, undrained shear strength, and tensile strength of soils. The undrained shear strength of soil is said to have a linear correlation with temperature. In addition, the undrained cohesion of soil was found to depend on the temperature, whereas the undrained friction angle of soil was significantly influenced by volumetric ice content. An increase in the volumetric ice content up to 80% to 90% will cause a reduction in the peak and residual deviatoric stresses. In addition, an increase in volumetric ice content resulted in an increase in the compressive strength of the soil. The tensile and compressive strengths were found to be functions of the unfrozen water content. Global warming is causing the temperature of the permafrost, which is permanently frozen ground, to rise. This paper provides valuable insights into the impact of the changes in this ambient temperature on the strength of frozen soils in permafrost regions for a wide range of applications. Such insights are crucial for the design of resilient and stable infrastructure, such as foundations, embankments, and retaining walls, in which consideration of the reduced strength of thawed soils due to climate change will be necessary. In addition, the knowledge will allow for better management of vulnerable areas prone to landslides and erosion caused by the weakened soil strength permitting the implementation of mitigation measures before lives are lost and costly economic damages are incurred. Finally, this information will aid in early warning systems, emergency planning, and decision making to minimize the impact of hazards on human settlements and infrastructure. In this paper, a review of the current state of knowledge regarding the strength of frozen soils and the associated fluctuations in these strengths because of a rise in temperature are presented. Guidelines on the best practices for sample preparation and testing along with correlations to estimate various strength parameters are also provided. [ABSTRACT FROM AUTHOR]

Understanding the impact of various climate forcing agents, such as aerosols, on extreme precipitation is socially and scientifically vital. While anthropogenic absorbing aerosols influence Earth's energy balance and atmospheric convection, their role in extreme events remains unclear. This paper uses convective‐resolving radiative‐convective‐equilibrium simulations, with fixed solar radiation, to investigate the influence of absorbing aerosols on extreme precipitation comprehensively. Our findings reveal an underappreciated mechanism through which absorbing aerosols can, under certain conditions, strongly intensify extreme precipitation. Notably, we demonstrate that a mechanism previously reported for much warmer (hothouse) climates, where intense rainfall alternates with multi‐day dry spells, can operate under current realistic conditions due to absorbing aerosol influence. This mechanism operates when an aerosol perturbation shifts the lower tropospheric radiative heating rate to positive values, generating a strong inhibition layer. Our work highlights an additional potential effect of absorbing aerosols, with implications for climate change mitigation and disaster risk management. Plain Language Summary: Aerosols, particles suspended in the atmosphere, can interact with the incoming solar radiation by scattering or absorbing it. Aerosol species that absorb solar radiation generate local warming of the atmosphere. This local warming changes the vertical profile of temperature and by that affects cloud and precipitation development. In this paper we use idealized computer simulations to investigate the effect of absorbing aerosols on precipitation, and specifically on extreme precipitation events in the tropics. We demonstrate that under certain conditions, absorbing aerosols can strongly enhance extreme precipitation even despite reducing the mean. We show that this trend can be explained by a mechanism previously reported for much warmer climate conditions than currently found on Earth, involving heating by radiation of the lower part of the troposphere. These results have implications for climate change mitigation and disaster risk management. Key Points: The effect of absorbing aerosol on extreme precipitation is examined in idealized convective‐resolving radiative‐convective‐equilibrium simulationsAerosol perturbation that shifts the lower tropospheric radiative heating rate to positive values strongly enhances extreme precipitationThis trend is explained by a mechanism reported before for hothouse climate conditions involving a shift into an "episodic deluge" regime [ABSTRACT FROM AUTHOR]

The rising Greenhouse Gas (GHG) emissions stemming from the extensive use of automobiles across the globe represent a critical environmental challenge, contributing significantly to phenomena such as global warming and the deterioration of air quality. To address these challenges, there is a critical need for research and development in electric vehicles (EVs) and their associated charging infrastructure, including off-board and on-board chargers (OBCs). This paper aims to bridge the gaps in existing review literature by offering a comprehensive review of both integrated and non-integrated OBCs for EVs, based on the authors' knowledge at the time of writing. The paper begins by outlining trends in the EV market, including voltage levels, power ratings, and relevant standards. It then provides a detailed analysis of two-level and multi-level power converter topologies, covering AC-DC power factor correction (PFC) and isolated DC-DC topologies. Subsequently, it discusses single-stage and two-stage non-integrated OBC solutions. Additionally, various categories of integrated OBCs (iOBCs) are explored, accompanied by relevant examples. The paper also includes comparison tables containing technical specifications and key characteristics for reference and analysis. [ABSTRACT FROM AUTHOR]

The increasing global warming trend has resulted in the mass loss of most glaciers. The Urumqi Vally, located in the dry and cold zone of China, and its widely dispersed glaciers are significant to the regional ecological environment, oasis economic development, and industrial and agricultural production. This is representative of glaciers in Middle Asia and represents one of the world's longest observed time series of glaciers, beginning in 1959. The Urumqi Headwater Glacier No. 1 (UHG-1) has a dominant presence in the World Glacier Monitoring Service (WGMS). This paper supplies a comprehensive analysis of past studies and future modeling of glacier changes in the Urumqi Valley. It has received insufficient attention in the past, and the mass balance of UHG-1 was used to verify that the geodetic results and the OGGM model simulation results are convincing. The main conclusions are: The area of 48.68 ± 4.59 km2 delineated by 150 glaciers in 1958 decreased to 21.61 ± 0.27 km2 delineated by 108 glaciers in 2022, with a reduction of 0.47 ± 0.04 km2·a−1 (0.96% a−1 in 1958–2022). The glacier mass balance by geodesy is −0.69 ± 0.11 m w.e.a−1 in 2000–2022, which is just deviating from the measured result (−0.66 m w.e.a−1), but the geodetic result in this paper can be enough to reflect the glacier changes (−0.65 ± 0.11 m w.e.a−1) of the URB in 2000–2022. The future loss rate of area and volume will undergo a rapid and then decelerating process, with the fastest and slowest inflection points occurring around 2035 and 2070, respectively. High temperatures and large precipitation in summer accelerate glacier loss, and the corresponding lag period of glacier change to climate is about 2–3 years. [ABSTRACT FROM AUTHOR]

In order to satisfy the demands for both safety and global warming reduction, a high-strength seismic reinforced steel bar is required in the structural steel market. Recent developments in computational thermodynamics and related application software have made it possible to design a suitable material as well as support engineers of steel manufacturing companies in the production of the designed material with minimum benchmarks in practical operations. This paper reports our recent success in developing grade 600 MPa reinforced steel bars for seismic safety in South Korea. First, conventional alloy design based on CALPHAD-type computational thermodynamics was carried out. For this purpose, a typical alloy system of Fe-0.30C-0.23Si-1.37Mn-0.14V-0.22Cu (in wt%) was selected, and thermodynamic and kinetic calculations were carried out using MatCalc and JMatPro software. Second, in order to reduce V content in the steel for economic reasons, a cooling process designed using finite element (FE) simulation based on the thermodynamic database was performed. For this application, Fe-0.34C-0.22Si-1.34Mn-0.04 V (in wt%) alloy was chosen, and the FE software ABAQUS was applied for modeling the TempCore process. The mechanical properties of the steel products with a diameter of 32 mm produced based on the simulated results satisfy the required properties for grade 600 MPa seismic reinforced steel bars. [ABSTRACT FROM AUTHOR]

The paper reviews and evaluates a 30-year-long atmospheric CO2 data series measured at Hegyhátsál tall-tower greenhouse gas monitoring site, a member of WMO GAW, NOAA, and ICOS networks (id. code: HUN). The paper also gives the technical description of the monitoring system, and that of the physical environment of the station. This low elevation (248 m above m.s.l.), mid-continental Central European site shows a 3.90±0.83 µmol mol‑1 offset relative to the latitudinally representative marine boundary layer reference concentration presumably due to the European net anthropogenic emissions. The long-term trend (2.20 µmol mol‑1 year‑1) closely follows the global tendencies. In the concentration growth rate, the ENSO effect is clearly detectable with a 6–7 months lag-time. The summer diurnal concentration amplitude is slightly decreasing due to the faster-than-average increase of the nighttime concentrations, which is related to the warming climate. The warming climate also caused a 0.96±0.41 day year‑1 advance in the beginning of the summer CO2-deficit season in the first half of the measurement period, which did not continue later. [ABSTRACT FROM AUTHOR]

Low-carbon building is an unavoidable development trend in the construction industry, especially in the critical moment of global warming, it is necessary to make a comprehensive evaluation of low-carbon buildings. At this stage, low carbon building has become an important direction in the construction field, and whether the low carbon building reaches the corresponding standards and the advantages played by the low carbon field need to be assessed with perfect evaluation indexes. Based on this, this paper constructs a low-carbon building evaluation system from the whole life cycle of the building using the hierarchical analysis method (AHP) and BP neural network method. Firstly, the definition and influencing factors of low-carbon buildings are analyzed, secondly, the evaluation index system of low-carbon buildings is constructed, and then the evaluation index system of low-carbon buildings is verified by using the hierarchical analysis method, and the results show that the evaluation results based on the hierarchical analysis and the BP neural network method are more accurate than those of the traditional hierarchical analysis method. The results show that the evaluation results based on hierarchical analysis and BP neural network are more accurate than the traditional hierarchical analysis method. It shows that the BP neural network method can effectively reduce the influence of subjective factors in the hierarchical analysis method and improve the objectivity of the evaluation results. On this basis, this paper proposes countermeasures to promote the development of low-carbon buildings, in order to provide a certain reference for the long-term development of low-carbon buildings. [ABSTRACT FROM AUTHOR]

As the second most predominant greenhouse gas, methane-targeted emission mitigation holds the potential to decelerate the pace of global warming. Satellite remote sensing is an important monitoring tool, and we review developments in the satellite detection of methane. This paper provides an overview of the various types of satellites, including the various instrument parameters, and describes the different types of satellite retrieval algorithms. In addition, the currently popular methane point source quantification method is presented. Based on existing research, we delineate the classification of methane remote sensing satellites into two overarching categories: area flux mappers and point source imagers. Area flux mappers primarily concentrate on the assessment of global or large-scale methane concentrations, with a further subclassification into active remote sensing satellites (e.g., MERLIN) and passive remote sensing satellites (e.g., TROPOMI, GOSAT), contingent upon the remote sensing methodology employed. Such satellites are mainly based on physical models and the carbon dioxide proxy method for the retrieval of methane. Point source imagers, in contrast, can detect methane point source plumes using their ultra-high spatial resolution. Subcategories within this classification include multispectral imagers (e.g., Sentinel-2, Landsat-8) and hyperspectral imagers (e.g., PRISMA, GF-5), contingent upon their spectral resolution disparities. Area flux mappers are mostly distinguished by their use of physical algorithms, while point source imagers are dominated by data-driven methods. Furthermore, methane plume emissions can be accurately quantified through the utilization of an integrated mass enhancement model. Finally, a prediction of the future trajectory of methane remote sensing satellites is presented, in consideration of the current landscape. This paper aims to provide basic theoretical support for subsequent scientific research. [ABSTRACT FROM AUTHOR]

The atmospheric carbon dioxide (CO2) concentration has been increasing rapidly since the Industrial Revolution, which has led to unequivocal global warming and crucial environmental change. It is extremely important to investigate the interactions among atmospheric CO2, the physical climate system, and the carbon cycle of the underlying surface for a better understanding of the Earth system. Earth system models are widely used to investigate these interactions via coupled carbon-climate simulations. The Chinese Academy of Sciences Earth System Model version 2 (CAS-ESM2.0) has successfully fixed a two-way coupling of atmospheric CO2 with the climate and carbon cycle on land and in the ocean. Using CAS-ESM2.0, we conducted a coupled carbon-climate simulation by following the CMIP6 proposal of a historical emissions-driven experiment. This paper examines the modeled CO2 by comparison with observed CO2 at the sites of Mauna Loa and Barrow, and the Greenhouse Gases Observing Satellite (GOSAT) CO2 product. The results showed that CAS-ESM2.0 agrees very well with observations in reproducing the increasing trend of annual CO2 during the period 1850–2014, and in capturing the seasonal cycle of CO2 at the two baseline sites, as well as over northern high latitudes. These agreements illustrate a good ability of CAS-ESM2.0 in simulating carbon-climate interactions, even though uncertainties remain in the processes involved. This paper reports an important stage of the development of CAS-ESM with the coupling of carbon and climate, which will provide significant scientific support for climate research and China's goal of carbon neutrality. [ABSTRACT FROM AUTHOR]

This paper assesses trending AI foundation models, especially emerging computer vision foundation models and their performance in natural landscape feature segmentation. While the term foundation model has quickly garnered interest from the geospatial domain, its definition remains vague. Hence, this paper will first introduce AI foundation models and their defining characteristics. Built upon the tremendous success achieved by Large Language Models (LLMs) as the foundation models for language tasks, this paper discusses the challenges of building foundation models for geospatial artificial intelligence (GeoAI) vision tasks. To evaluate the performance of large AI vision models, especially Meta's Segment Anything Model (SAM), we implemented different instance segmentation pipelines that minimize the changes to SAM to leverage its power as a foundation model. A series of prompt strategies were developed to test SAM's performance regarding its theoretical upper bound of predictive accuracy, zero-shot performance, and domain adaptability through fine-tuning. The analysis used two permafrost feature datasets, ice-wedge polygons and retrogressive thaw slumps because (1) these landform features are more challenging to segment than man-made features due to their complicated formation mechanisms, diverse forms, and vague boundaries; (2) their presence and changes are important indicators for Arctic warming and climate change. The results show that although promising, SAM still has room for improvement to support AI-augmented terrain mapping. The spatial and domain generalizability of this finding is further validated using a more general dataset EuroCrops for agricultural field mapping. Finally, we discuss future research directions that strengthen SAM's applicability in challenging geospatial domains. [ABSTRACT FROM AUTHOR]

There have been fruitful publications on thermal comfort of urban residential buildings in China. However, there is a lack of reviews on this topic to perform a comprehensive analysis and find opportunities to meet occupants' thermal comfort needs while improving building energy efficiencies. This paper addresses this issue by presenting a systematic review on the advancements in research on thermal comfort in urban residential buildings in China. Firstly, two common thermal comfort research approaches, i.e., field studies and laboratory studies, are discussed. Secondly, eleven main thermal comfort evaluation indicators are summarized. Finally, this paper analyzes the thermal comfort survey data from different researchers, discusses the impacts of adaptive behaviors on human thermal comfort, and provides recommendations for future research on urban residential thermal comfort. It was found that people have higher and higher requirements for their indoor thermal environment as time goes by, especially in the winter; the thermoneutral temperature is higher in warmer climate regions in the summer but lower in the winter than in colder climate regions; the thermoneutral temperature tends to increase with the indoor air temperature due to an adaptation to the indoor thermal environment. The outcomes of this paper provide valuable information on thermal comfort behaviors of urban residents in different climate zones in China, which can serve as a resource for the academic community conducting future research on thermal comfort and assist policymakers in enhancing building energy efficiencies without compromising the occupants' comfort. [ABSTRACT FROM AUTHOR]

In recent years, under the influence of changes in natural conditions and human social activities, the issue of global warming has become increasingly prominent. So it is crucial to effectively predict the future trend of temperature changes. In this regard, from the perspective of statistical models, this paper studies a new combination model, namely the new GM-ARIMA model, based on linear combination of weight calculation. Furthermore, it also analyzes the prediction effect through comparative experiments and uses multiple performance evaluation indicators, so as to prove the scientificity and effectiveness of the proposed combination model in this paper. Finally, according to the experimental results, it can be clearly found that among the four methods for calculating the weights of linear combination, namely the equal weight method, the variance reciprocal method, the residual reciprocal method and the standard deviation method, the combination model using the standard deviation method for calculation has the highest prediction accuracy, so it is finally decided to use this method to build the combination model (namely S-GM-ARIMA). In addition, the experimental results show that the S-GM-ARIMA model achieves the best prediction results compared to other existing prediction models. Among them, the MAE of S-GM-ARIMA decreases by 10.38% and 16.22% compared to the GM(1,1) model and ARIMA model, respectively. The RMSE of S-GM-ARIMA decreases by 4.52% and 10.03% compared to the GM(1,1) model and ARIMA model, respectively. And the MAPE of S-GM-ARIMA decreases by 10.34% and 16.17% compared to the GM(1,1) model and ARIMA model, respectively. Therefore, the new GM-ARIMA combination model studied in this paper has relatively higher prediction accuracy when making predictions, and can be used to make more effective and accurate predictions of global average temperature. This study can also provide reference for countries in making decisions to address global warming issues. [ABSTRACT FROM AUTHOR]

Climatic and geographic factors characterizing local conditions, as well as the ecological state of the external environment, have a direct effect on human health, morbidity, and life expectancy. The paper considers the basic concepts of medical ecology, a pathogenetic role of environmental atmospheric pollution in the development of environmentally induced and environmentally dependent diseases associated with exposure to meteorological factors. In addition to the major hygienic risk factors affecting the public health (a level of air, water, and soil pollution), the levels of acoustic and electromagnetic background, the type of human nutrition, architectural and planning conditions of human life are of significant importance. Global climate warming causes numerous environmental changes, primarily an increase in surface air temperature, which in turn entails global changes in weather conditions that lead to various weather anomalies. Human health is directly dependent on environmental conditions and a degree of adaptation to them. The paper highlights the issues of diagnosing environmentally induced diseases and measures to counteract their spread. Based on the system diagnosis using physiological indicators of human health and the integration of the adaptation and nosological approaches, a hardware-software complex has been developed and introduced into medical practice. Corrective technologies of regenerative medicine that are used for ecologically dependent pathologies are described. Their application in the process of the complex sanatorium and resort treatment is most effective. [ABSTRACT FROM AUTHOR]

The intensification of global warming has resulted in extremely hot weather in many parts of the world, posing a severe challenge to the health and safety of outdoor workers. Passive daytime radiative cooling (PDRC) textiles with no energy input requirements can effectively achieve temperature management. However, few wearable radiative cooling devices have been successfully prepared. This study demonstrates a radiative cooling paper (RCP) with tunable stiffness for the thermal management of human head by using SiO 2 fibers and fumed SiO 2 as emitters. The as-prepared RCP exhibits high sunlight reflectivity of 0.97, and high emissivity of 0.91 in the atmospheric window. The results demonstrate that the RCP hat can prevent hair from overheating by reducing the temperature by an average of 12.9 °C compared with a white cotton hat under peak daylight conditions. Besides, the RCP exhibits outstanding integrated properties of high mechanical properties, waterproofness, and air permeability. Therefore, it is more suitable than other textiles for the manufacture of radiative cooling hats, and offers a promising solution to solve the problem of head thermal management in outdoor conditions. [Display omitted] • This study designed and prepared a ceramic fiber paper with remarkable passive daytime radiative cooling performance. • The radiative cooling paper (RCP) exhibits good impact strength, superhydrophobicity, and air permeability. • The RCP is suitable for the manufacture of radiative cooling hat to achieve the thermal management of human head. [ABSTRACT FROM AUTHOR]

The STatistical Analogue Resampling Scheme (STARS) statistical approach was recently used to project changes of climate variables in Germany corresponding to a supposed degree of warming. We show by theoretical and empirical analysis that STARS simply transforms interannual gradients between warmer and cooler seasons into climate trends. According to STARS projections, summers in Germany will inevitably become dryer and winters wetter under global warming. Due to the dominance of negative interannual correlations between precipitation and temperature during the year, STARS has a tendency to generate a net annual decrease in precipitation under mean German conditions. Furthermore, according to STARS, the annual level of global radiation would increase in Germany. STARS can be still used, e.g., for generating scenarios in vulnerability and uncertainty studies. However, it is not suitable as a climate downscaling tool to access risks following from changing climate for a finer than general circulation model (GCM) spatial scale. [ABSTRACT FROM AUTHOR]

AI chatbots such as ChatGPT help people produce texts. According to media reporting, these texts are also used for educational purposes. Thus, AI influences people's knowledge and perception of current issues. This paper examines the narrative of ChatGPT's stories on climate change. Our explorative analysis reveals that ChatGPT's stories on climate change show a relatively uniform structure and similar content. Generally, the narrative is in line with scientific knowledge on climate change; the stories convey no significant misinformation. However, specific topics in current debates on global warming are conspicuously missing. According to the ChatGPT narrative, humans as a species are responsible for climate change and specific economic activities or actors associated with carbon emissions play no role. Analogously, the social structuration of vulnerability to climate impacts and issues of climate justice are hardly addressed. ChatGPT's narrative consists of de-politicized stories that are highly optimistic about technological progress. [ABSTRACT FROM AUTHOR]

A typical Madden–Julian Oscillation (MJO) generates a large region of enhanced rainfall over the equatorial Indian Ocean that moves slowly eastward into the western Pacific. Tropical cyclones often form on the poleward edges of the MJO moist-convective envelope, frequently impacting both southeast Asia and northern Australia, and on occasion Eastern Africa. This paper addresses the question of whether these MJO-induced tropical cyclones will become more numerous in the future as the oceans warm. The Lagrangian Atmosphere Model (LAM), which has been carefully tuned to simulate realistic MJO circulations, is used to study the sensitivity of MJO modulation of tropical cyclogenesis (TCG) to global warming. A control simulation for the current climate is compared with a simulation with enhanced radiative forcing consistent with that for the latter part of the 21st century under Shared Socioeconomic Pathway (SSP) 585. The LAM control run reproduces the observed MJO modulation of TCG, with about 70 percent more storms forming than monthly climatology predicts within the MJO's convective envelope. The LAM SSP585 run suggests that TCG enhancement within the convective envelope could reach 170 percent of the background value under a high greenhouse gas emissions scenario, owing to a strengthening of Kelvin and Rossby wave components of the MJO's circulation. [ABSTRACT FROM AUTHOR]

The upper Rhône valley (cantons of Valais and Vaud, W Switzerland) is currently being colonized by the Short-toed Snake-Eagle. This bird of prey, characterized by a slow life history strategy (one egg per clutch, one annual clutch, late sexual maturity and marked longevity) bred successfully for the first time in Switzerland in 2012, while reproduction became regular since 2015. This paper describes the recent demographic growth and spatial expansion of this small population and discusses various aspects of its ecology. In 2022 and 2023, there were already six breeding pairs. Since 2012, a total of 27 breeding events have been recorded that yielded 20 fledglings, with a maximum of 6 in 2023. A better conservation status as well as global warming are likely the main causes of this spatio-demographic expansion, which has also been reported in other areas of Europe. [ABSTRACT FROM AUTHOR]

Biodiversity reserves are a crucial in-situ method to conserve biodiversity hotspots as they are sensitive to climate change. The Nanda Devi Biosphere Reserve (NDBR) in the western Himalayas is enriched with diverse endemic flora and fauna and endorses the second-highest mountain peak in the world. However, in the recent decade, this region has potentially warmed at an alarming rate. With 36 temperature and precipitation indices from high-resolution 40-year data from ERA5 reanalysis and CHIRPS, this paper assesses the state of warming and extreme climatic events. Apart from the indices, Landsat (NASA/USGS, USA) and QuickSCAT (ISRO, India) were utilized to assess the region's response to climate change. An increase of 0.73ºC in the last decade for minimum, 0.26°C for maximum temperatures was observed, with the highest anomaly of 1.7°C in 2016. The reserve's vegetation pattern has changed with the vegetative region's dispersal towards the north and higher elevations. In the year 2000, the area without any vegetation covered 79% of the total area, which declined to a mere 23.8% in the year 2020, equivalent to a 70% decline in the area. Similarly, the area with very dense region covered only 0.02% of the total area in the year 2000, and in the year 2020, it increased to 109%. Snow cover seems to be worst affected in the region with dense snow cover declining maximum by 2020. From coverage of 12.3% of the total area of the reserves, it was reduced to a mere 0.02%, showing a decline of nearly 100% in the region. Our findings show that although protected areas are meant to be resilient to external anthropogenic intrusions, they are highly susceptible to the intrinsic forces of induced climate change. We suggest that reserve managers enable robust measures to identify the distribution of vulnerable species and introduce new methods to preserve the pristine hotspot region. [ABSTRACT FROM AUTHOR]

Simply expressed, the circular economy implies that the people living on Earth should reuse and recycle the products that are currently in use as long as possible and reduce the waste produced, thus reducing CO2 emissions. The latter goal is fundamental from the perspective of mitigating the well-known greenhouse effect and the consequent global warming observed at the planetary scale. Under these conditions, advanced electrodeposition processes can play a fundamental role in the optimization of materials use and in the reduction of the energetic footprint for a wide variety of industrial processes. The aim of the present paper is precisely to suggest how this is possible, showing readers the potential that electrodeposition holds for efficient manufacturing of many different products that have a huge significance for industry. [ABSTRACT FROM AUTHOR]

With the reduction in fossil fuels and growing concerns about global warming, energy has become one of the most important issues facing humanity. It is crucial to improve energy utilization efficiency and promote a low-carbon transition. In comparison with traditional heat exchangers, heat pipe heat exchangers indicate high compactness, a flexible arrangement, complete separation of hot and cold fluids, good isothermal operations, etc. As a result, heat pipe heat exchangers have attracted wide attention and application in various fields in recent years. This paper provides an overview of the application of heat pipe heat exchangers, with a focus on the application in waste heat recovery, and analyzes the opportunities and challenges of heat pipe heat exchanger applications based on existing publications. [ABSTRACT FROM AUTHOR]

The cloud feedback may result in amplification or damping of Arctic warming. Two common techniques used to diagnose the top‐of‐the‐atmosphere cloud feedback are the Adjusted Cloud Radiative Effect (AdjCRE) method and the Cloud Radiative Kernel (CRK) method. We apply both to CMIP5 and CMIP6 model data, finding that the AdjCRE calculated Arctic shortwave cloud feedback is twice as correlated with sea ice loss in CMIP5, and four times in CMIP6, as the CRK method. We find that the CRK method produces Arctic all‐sky residual percentages exceeding 20% in 15 of 18 models. We use the CRK method to decompose the feedback in CMIP5 and CMIP6 finding that its median value changed from negative to positive driven by a less‐negative cloud optical depth feedback. Despite its lack of closure, we conclude that the CRK method is better suited for Arctic SW feedbacks as it is less impacted by surface albedo changes. Plain Language Summary: The cloud feedback is the process by which cloud property changes in a warming climate can either further enhance warming or damp it. The Arctic is warming faster than the rest of the globe, and one of the largest sources of uncertainty in its climate projections is the cloud feedback. There are two popular methods to calculate the cloud feedback: the Adjusted Cloud Radiative Effect technique, and the Cloud Radiative Kernel technique. In this paper we compare the two methods in a suite of climate models by considering the extent to which changes in Arctic sea ice impact the cloud feedbacks. From this analysis we conclude that the Cloud Radiative Kernel method is less affected by sea ice loss. We then apply the Cloud Radiative Kernel technique to data from the two most recent generations of global climate models to investigate how polar day Arctic cloud feedbacks have changed between these generations. We find that the median value of these Arctic feedbacks is slightly positive in the newest generation of models, a change from slightly negative in the previous generation that is largely fueled by a weakening of the feedback associated with changes in cloud optical depth. Key Points: The Cloud Radiative Kernel method is less sensitive to surface albedo changes than the Adjusted Cloud Radiative Effect techniqueThe Cloud Radiative Kernel method provides poor radiative closure in a suite of global climate modelsThe median shortwave Arctic cloud feedback in recent climate models is slightly positive due to a weakened cloud optical depth feedback [ABSTRACT FROM AUTHOR]

Simple Summary: Since the 1990s, the golden cuttlefish (Sepia esculenta) has become the dominant cuttlefish fisheries target in the seas around China. In this paper, we aim to determine the current resource status and spatio-seasonal variation in the population in the East China Sea region. We found more juveniles at latitudes of 27.50–28.00° N and 29.00° N and more subadult individuals at 28.50° N in autumn, exhibiting different growth rates and resource densities. In addition, we found the majority of the catches were composed of parent groups in spring, while in autumn, the majority of the catches were composed of juvenile groups. We concluded that the subadult groups might have dispersed widely for feeding and growth along the latitude of 30.00° N and to the south in summer, and the southern area of the Yangtze River extending north was the spawning ground in spring. The groups of S. esculenta preferred to stay in areas with a stable water temperature of ~20.00 °C, and many S. esculenta juveniles might have adapted to endure the negative influence of the low oxygen content in summer. The depth range of the S. esculenta population was 10.00–133.00 m from spring to autumn, but this shrank to 66.00–107.00 m in winter. The golden cuttlefish (Sepia esculenta) is an important cephalopod species with a lifespan of approximately one year. The species plays a crucial role in marine ecological support services and is commercially valuable in fisheries. In the seas around China, this species has emerged as the main target for cuttlefish fisheries, replacing Sepiella maindroni since the 1990s. Variations in oceanographic conditions associated with global warming could significantly impact the temporal-spatial distribution of the species. In this study, we performed bottom trawling surveys with four cruises during 2018–2019 in the East China Sea region to determine the current resource status and seasonal-spatial variations in S. esculenta. We found that the average individual weight (AIW) values were 4.87 and 519.00 g/ind at stations located at 30.50° N, 124.00° E and 30.50° N, 124.50° E, respectively, with the aggregation of larvae and parent groups in spring. The species was not distributed north of 32.00° N in summer. The catch per unit effort by weight (CPUEw) value decreased in the order of 2772.50→2575.20→503.29→124.36 g/h, corresponding to latitudes of 34.50° N→34.00° N→33.50° N→32.50° N 121.50° E in autumn. The most suitable fishing areas were the south of the East China Sea region in spring; the south of the East China Sea region extending to the center and outer parts of the East China Sea region in summer; the south of the Yellow Sea close to the Haizhou Bay fishing ground and the forbidden fishing line region of the Lusi and Dasha fishing grounds in autumn; and the south and center of the East China Sea region in winter. The most suitable sea bottom temperature (SBT) values from spring to winter were 14.76–20.53 °C, 19.54–22.98 °C, 11.79–17.64 °C, and 16.94–20.36 °C, respectively. The most suitable sea bottom salinity (SBS) values were 31.53–34.80‰ in spring, 32.95–34.68‰ in summer, 31.51–34.77‰ in autumn, and 33.82–34.51‰ in winter. We concluded the following: (1) the southern and northern areas of the East China Sea region are spawning and nursery grounds, respectively, in spring; (2) the central distribution is located at a latitude of 28.00° N in autumn and winter; and (3) the southern area of the Yangtze River to the north is a spawning ground in spring, and the areas located at 29.00–34.50° N, 124.00–124.50° E, and 28.00–30.50° N, 125.50–126.50° E are nursery grounds. The results of this study provide useful guidance for appropriate fisheries management, thereby avoiding a collapse in the S. esculenta population, which has been experienced in other species in this area. [ABSTRACT FROM AUTHOR]

During extreme heat events (EHEs) the public often learns about health protective actions through the media. Visual news coverage can act as a powerful tool to help convey complex health protective actions to the public. Despite the importance of images in helping the public understand the risk, there has been no systematic analysis to assess what images have been used by media outlets in Canada during EHEs. This paper helps to fill that gap by analyzing how the Canadian media visually communicated the risks of extreme heat to the public during the unprecedented 2021 Heat Dome. A review of thousands of online news media articles published about the 2021 Heat Dome in Canada was conducted on five subscription news databases. Overall, 845 images were coded to identify denotative, connotative, and ideological content. Only 16% of these published images implied that heat was dangerous, of which only 40% depicted people, and 46% implied human suffering. Our findings demonstrate that the majority of images used in Canadian news coverage on the 2021 Heat Dome are incompatible with, and frequently contradict, evidence-based heat protective actions. Governments, public health agencies, and other stakeholders engaged in distributing heat preparedness messaging (e.g., journalists) should prioritize improving the images of extreme heat in news coverage to align with evidence-based public health messages. With rising global temperatures due to climate change and the associated increases in the frequency and intensity of extreme heat events, prioritizing these actions is critically important to offset the threat posed to public health. [ABSTRACT FROM AUTHOR]

Freeze–thaw (FT) erosion intensity may exhibit a future increasing trend with climate warming, humidification, and permafrost degradation in the Qinghai–Tibet Plateau (QTP). The present study provides a reference for the prevention and control of FT erosion in the QTP, as well as for the protection and restoration of the regional ecological environment. FT erosion is the third major type of soil erosion after water and wind erosion. Although FT erosion is one of the major soil erosion types in cold regions, it has been studied relatively little in the past because of the complexity of several influencing factors and the involvement of shallow surface layers at certain depths. The QTP is an important ecological barrier area in China. However, this area is characterized by harsh climatic and fragile environmental conditions, as well as by frequent FT erosion events, making it necessary to conduct research on FT erosion. In this paper, a total of 11 meteorological, vegetation, topographic, geomorphological, and geological factors were selected and assigned analytic hierarchy process (AHP)-based weights to evaluate the FT erosion intensity in the QTP using a comprehensive evaluation index method. In addition, the single effects of the selected influencing factors on the FT erosion intensity were further evaluated in this study. According to the obtained results, the total FT erosion area covered 1.61 × 106 km2, accounting for 61.33% of the total area of the QTP. The moderate and strong FT erosion intensity classes covered 6.19 × 105 km2, accounting for 38.37% of the total FT erosion area in the QTP. The results revealed substantial variations in the spatial distribution of the FT erosion intensity in the QTP. Indeed, the moderate and strong erosion areas were mainly located in the high mountain areas and the hilly part of the Hoh Xil frozen soil region. [ABSTRACT FROM AUTHOR]

In northern regions, the long-term serviceability of infrastructure founded on frozen ground is adversely affected by climate warming. Rates of change in temperature, which are not identical spatially and temporally, can remarkably dictate the magnitude and evolution of permafrost degradation. Investigating such impacts requires a non-isothermal rate-dependent geomechanical constitutive model for ice-contained geomaterials. In this paper, a critical-state thermo-elasto-viscoplastic (TEVP) constitutive model is developed for modeling time- and temperature-dependent behavior of frozen soils using the concepts of thermo-elasticity and thermo-viscoplasticity. Solid phase stress (defined as the excess of total stress over fluid pressure), in addition to the cryogenic suction, are considered as the two independent stress state variables to establish the model. The proposed model is able to satisfactorily capture the rate-dependent behavior of frozen soils observed in the experimental tests reported in the literature. [ABSTRACT FROM AUTHOR]

In this paper, the global distribution of precipitation for 2023, in terms of global totals and regional anomaly patterns, is analyzed using information from the new Global Precipitation Climatology Project (GPCP) V3.2 Monthly product, including how the precipitation amounts and patterns from 2023 fit into the longer record from 1983–2023. The tropical pattern of anomalies for 2023 is dominated by the effect of the El Nino which began during the Northern Hemisphere spring, after three plus years of La Nina conditions. The transition from La Nina conditions through 2022 shows the rapid change in many regional features from positive to negative anomalies or the reverse. Comparison of the observed regional trend maps with climate model results indicates similarity between the observations and the model results forced by observed SSTs, while the "free-running" model ensemble shows only a broad general agreement over large regions. Global total precipitation shows about a 3% range over the span of data, with El Nino and La Nina years prominent as positive and negative features, with 2023 showing a small positive global anomaly. The ITCZ (Inter-Tropical Convergence Zone) latitude band, 0–10° N, sets a record high mean rain rate in 2023 after a steady upward trend over the decades, probably a response related to global warming. [ABSTRACT FROM AUTHOR]

Ecuador is a country with several climate zones. However, their behaviour is similar throughout the year, with no peaks of extreme temperatures in the various seasons. This paper is a first approach to study the adaptive comfort behaviour in several areas and populations of the country. Considering the ASHRAE 55-2020 model, energy simulation programmes are applied not just to the current climate scenario but also to the climate change scenarios of 2050 and 2100. The results of locations are analysed and compared to determine their performance. Thanks to their climate characteristics, adaptive comfort models could be applied as a passive strategy, using natural ventilation for building indoor comfort improvement, particularly social dwellings. According to previous studies, some prototypes have not considered the climate determinants in each region. Given the geographic situation of the study areas, the adaptive comfort model could be applied in all cases. Percentages of application of natural ventilation and heating and cooling degree hours have similar behaviours according to the climatic region, with a variation greater than 30% among them. [ABSTRACT FROM AUTHOR]

Urolithiasis is a disease of the genitourinary system, which is defined as the presence of urinary stones at any place in the urinary tract, resulting from the precipitation reaction of chemical compounds. The aim of this study is to demonstrate the important role of selected environmental factors (climate, ambient temperature) and the type of profession performed in the development of urolithiasis. In this field, the literature including original and review papers related to the epidemiology, pathogenesis and risk factors of urolithiasis was analyzed. The study used electronic databases such as Medline, Web of Science and Google Scholar. The prevalence of urolithiasis has increased in recent decades in both developed and developing countries. It is believed that this growing trend is associated with lifestyle changes such as the lack of physical activity, poor eating habits and global warming. Many factors are responsible for the formation of urinary stones. In literature, there is a division into individual and environmental factors. Today, external factors in the form of climate changes (global warming), geographical conditions and seasonal fluctuations, and the type of profession performed are becoming more and more important in the context of the occurrence of urinary stones. Currently, the presence of urolithiasis is becoming a significant problem all over the world and searching for causes is not easy, but particular attention should be paid to certain predispositions resulting from environmental factors, such as ambient temperature and the type of work performed. Int J Occup Med Environ Health. 2019;32(6):761-75. [ABSTRACT FROM AUTHOR]

The uneven changes in potential evapotranspiration (PET) in response to temperature rise are called the 'evapotranspiration paradox' phenomenon, which is expected to intensify further under a warming climate. In this paper, we explored the spatial–temporal changes in the future 'evapotranspiration paradox' phenomenon over China and its 10 major river sub‐regions under different climate change scenarios. Thus, this paper uses four global climate model outputs under seven shared socioeconomic pathway‐based scenarios (SSP1‐1.9, SSP1‐2.6, SSP2‐4.5, SSP3‐7.0, SSP4‐3.4, SSP4‐6.0 and SSP5‐8.5) from the sixth phase of the Coupled Model Intercomparison Project (CMIP6). Considering the latest IPCC's 6th Assessment Report (AR6), this research emphasizes the 2021–2040 (near‐term), 2041–2060 (mid‐term) and 2081–2100 (long‐term) periods to anticipate the 'evapotranspiration paradox' phenomenon. In this study, PET is estimated based on the modified Penman–Monteith (P‐M) method (considering CO2). Furthermore, the paradox phenomenon in this study is defined considering two pivotal conditions: the surface temperature increases but the evaporation decreases (Type I), and the temperature decreases but the evaporation still tends to increase (Type II). The results show that there were only Type I 'evapotranspiration paradoxes' that existed in the historical period, which were dominant especially before the 1990s. Nearly 50% of the areas experienced the Type I 'evapotranspiration paradox' phenomenon that occurred during 1975–1994 and 1995–2014. Spatially, it covered 100% of the area of the Southeast River (SER) and the Liaohe River (LR) during 1975–1994 and the area of the SER, the HAR, the HHR and the LR during 1995–2014. In the future, the interdecadal growth rate of PET in China is projected to be the highest under the SSP5‐8.5 and the lowest under the SSP3‐7.0 with spatial variation. Importantly, the largest areas of approximately 36% and 45% with the Type I phenomenon are inclined to occur under the SSP1‐1.9 and SSP4‐6.0, respectively, over the long‐term period (2081–2100). The area with the Type I phenomenon will be less than 20% in the near‐term, and it is less than 12% in the mid‐term period. For the Type II evapotranspiration paradox, the uppermost 45% of the area is expected to experience the Type II phenomenon under SSP1‐1.9 during the mid‐term period, while it is 30% under SSP1‐2.6 during the long‐term period. However, this study's findings provide the scientific basis for formulating adaptation and mitigation strategies to combat 'evapotranspiration paradox'‐related extremes at regional scales. [ABSTRACT FROM AUTHOR]

Based on the detection data obtained by the LMI (Lightning Mapping Imager)—China's first satellite-based lightning observation payload—from 2018–2022, combined with the ERA5 (ECMWF Reanalysis v5) reanalysis data of the same period, the temporal and spatial characteristics of lightning activities over the Tibetan Plateau and its response to the atmospheric circulation background are studied in detail in this paper. Based on the LMI data, we obtained consistent and continuous long-time-series lightning observation data for the whole region of the plateau for the first time, and the results show that the lightning density in the Tibetan Plateau is much smaller than that in the central and eastern land regions of China (CELR) at the same latitude. Lightning activity was unevenly distributed over the plateau and had obvious seasonal variation characteristics. The monthly amount of lightning and its ratio in the total amount of lightning for the whole year show the characteristics of "increasing first and then decreasing". Most lightning occurs in June and July, which is about a month earlier than that in the CELR. The amount of lightning fluctuated in May and decreased rapidly after August, which is consistent with the local convective thunderstorm season. The hourly lightning frequency at different altitudes over the Tibetan Plateau is consistent with local convections and unique topography, and it is closely related to the features of the local night rain. The results also reveal comparative features between lightning and the atmospheric circulation background on the plateau, such as the wind field, CAPE (convective available potential energy), temperature, and humidity at 500 hPa. In the context of global warming, the average temperature in the central and western regions of the plateau increased in the past five years. This shows that the Tibetan Plateau, as a summer heat source, has a gradual warming trend, and the corresponding convections and lightning activities are also increasing gradually. Lightning activities can be used as an indicator of DCSs (deep convective systems). This paper gives a more comprehensive understanding of the characteristics of lightning activities all over the Tibetan Plateau, especially in the western part of the plateau, which lacked ground-based lightning observation data before. In addition, it reveals the comparative features between the lightning activities and the circulation background over the plateau in the past five years, which is helpful for further understanding the contribution of lightning activities to the plateau's climate change. It can provide some reference for monitoring and researching the severe convective weather over the Tibetan Plateau. [ABSTRACT FROM AUTHOR]

Drought monitoring and early detection have improved greatly in recent decades through the development and refinement of numerous indices and indicators. However, a lack of guidance, based on user experience, exists as to which drought-monitoring tools are most appropriate in a given location. This review paper summarizes the results of targeted user engagement and the published literature to improve the understanding of drought across North America and to enhance the utility of drought-monitoring tools. Workshops and surveys were used to assess and make general conclusions about the perceived performance of drought indicators, indices and impact information used for monitoring drought in the five main Köppen climate types (Tropical, Temperate, Continental, Polar Tundra, Dry) found across Canada, Mexico, and the United States. In Tropical, humid Temperate, and southerly Continental climates, droughts are perceived to be more short-term (less than 6 months) in duration rather than long-term (more than 6 months). In Polar Tundra climates, Dry climates, Temperate climates with dry warm seasons, and northerly Continental climates, droughts are perceived to be more long-term than short-term. In general, agricultural and hydrological droughts were considered to be the most important drought types. Drought impacts related to agriculture, water supply, ecosystem, and human health were rated to be of greatest importance. Users identified the most effective indices and indicators for monitoring drought across North America to be the U.S. Drought Monitor (USDM) and Standardized Precipitation Index (SPI) (or another measure of precipitation anomaly), followed by the Normalized Difference Vegetation Index (NDVI) (or another satellite-observed vegetation index), temperature anomalies, crop status, soil moisture, streamflow, reservoir storage, water use (demand), and reported drought impacts. Users also noted the importance of indices that measure evapotranspiration, evaporative demand, and snow water content. Drought indices and indicators were generally thought to perform equally well across seasons in Tropical and colder Continental climates, but their performance was perceived to vary seasonally in Dry, Temperate, Polar Tundra, and warmer Continental climates, with improved performance during warm and wet times of the year. The drought indices and indicators, in general, were not perceived to perform equally well across geographies. This review paper provides guidance on when (time of year) and where (climate zone) the more popular drought indices and indicators should be used. The paper concludes by noting the importance of understanding how drought, its impacts, and its indicators are changing over time as the climate warms and by recommending ways to strengthen the use of indices and indicators in drought decision making. [ABSTRACT FROM AUTHOR]

This paper proposes a novel aviation CO 2 emissions reduction method by introducing a market-based incentive mechanism. An aviation carbon emissions prediction model is proposed to characterize both the microscopic flight dynamics and the macroscopic air traffic demand trend. Based on emissions prediction, a linear climate response model is applied to evaluate the environmental impact of the aviation carbon emissions. Finally, a market-based framework for aviation CO 2 emissions reduction is established based on a two-phase carbon trading model, which provides a piecewise charge method through emission taxation and cap-and-trade. A case study is carried out to demonstrate the effectiveness of the proposed framework using a real-world dataset from the Hefei Air Traffic Control Zone in China. Three scenarios are defined to describe the possible development speed of sustainable aviation fuel application in the future: not applied, medium-speed development, and high-speed development. The results show that the carbon peak will be reached in 2025 in the high-speed development scenario, when the emission amount and associated environmental impact will be reduced by 23.7% and 22.3%, respectively. Thus, the market-based framework proposed in this paper can effectively reduce aviation CO 2 emissions and mitigate the effects of global warming. • An aviation CO 2 emissions prediction model is proposed considering both microscopic flight dynamics and macroscopic traffic demand. • A more efficient market-based CO 2 emission reduction framework is developed based on a two-phase carbon trading model by means of taxation and cap-and-trade. • Case study shows that the proposed method has a more optimal incentive for CO 2 emission reduction. [ABSTRACT FROM AUTHOR]

Abstract: Currently there are several methodologies available for estimating the carbon footprint of products. In this study a comparison has been made between the outcomes and the implications of three different methodologies applied to office paper: (1) the ISO 14040/14044 standards limited to the analysis of greenhouse gas (GHG) emissions and the corresponding impact category global warming; (2) the PAS 2050; and (3) the Confederation of European Paper Industries (CEPI) framework. The carbon footprint of office paper from cradle-to-costumer is 4.64, 4.74 and 4.29gCO2eq per A4 sheet according to, respectively, the ISO 14040/14044 standards, the PAS 2050 and the CEPI framework. The ISO 14040/14044 standard methodology allows the quantification of 98% of the total GHG emissions with the smallest effort in data collection. The major hot spots are the stages of eucalypt pulp and office paper production and chemical and fuel production for all methodologies. General methodologies such as those analysed in this study are not enough for the comparison of products. More specific rules, such as Product Category Rules, that limit the degree of freedom in the choice of the functional unit, system boundary, allocation rules, data quality, between others, should be developed. [Copyright &y& Elsevier]

This paper discusses the radiation budget and its temporal variability over Poland. The data analysis is based on the MERRA-2 reanalysis for the years 1980–2020. During the last four decades, the enhancement of climate warming has been observed, which coincides with the changes in the radiation budget. Positive and statistically significant trends at the top of the atmosphere (TOA; 0.7 ± 0.2 W/m2/10 year) and on the Earth's surface (1.5 ± 0.2 W/m2/10 year) radiation budget (net downward flux) are mainly a consequence of changes in the amount of aerosol and greenhouse gases (GHG). According to MERRA-2, the AOD during this period decreased by − 0.19 (at 550 nm), which is 87% of the long-term (1980–2021) mean value (0.22). The reduction of AOD is due mainly to the decline of non-absorbing sulfate particles, which leads to a reduction of single-scattering albedo (SSA) by − 0.008 per decade and Angstrom exponent (AE) by − 0.06 per decade (both trends statistically significant). On the other hand, the GHG concentration increased by 4.9%/10 year and 3%/10 year, respectively, for CO2 and CH4. The total column of water vapor increased (1.3%/10 year), while ozone decreased (− 1%/10 year). Despite the fact that cloud cover and cloud optical depth (COD) decreased (− 1.8%/10 year and − 1.0%/10 year), the impact of cloud on temporal variability radiation budget is small. It can be explained by nearly compensated shortwave (SW) cooling and longwave (LW) heating effects. During the analysis period, near-surface air temperature increased by 2.0 °C. The estimated increase in SW net surface radiation (7.9 W/m2) leads to climate warming by 0.8 °C, which is a consequence mainly of the reduction of aerosol (0.4 °C) and cloud cover (0.2 °C). The impact of the change of SW radiation on air temperature is more pronounced during the warm season, while during the cold, air temperature change is controlled mainly by the variability of air mass advection. [ABSTRACT FROM AUTHOR]

The article focuses on various issues related to agriculture in Australia including shortage of agricultural graduates, global warming, and retention of prime agricultural land as discussed in the papers in the agricultural competitiveness issue. Topics include establishment of intern programs to attract entrants to agriculture courses, sequestration of carbon, and development of national standards by federal government for protection of prime agricultural land from mining and encroachment.

Utilizing renewable energy (RE) sources can provide a realistic answer to the problem of many nations' energy needs. This paper reviews the current status of using RE to produce electricity in the Kingdom of Saudi Arabia (KSA). The primary aim of the review is to identify and analyze the solar- and wind-energy utilization, problems, and future trends in KSA while taking into account all relevant aspects, associated development hurdles, and suggested solutions. All involved parties will receive useful results and conclusions from a thorough examination and analysis of the pertinent literature that can assist them in understanding the potential of solar and wind energy, considering all the linked issues. [ABSTRACT FROM AUTHOR]

The severe global warming issue currently threatens humans' existence and development. Countries and international organizations have effectively implemented policies to reduce carbon emissions and investigate low-carbon growth strategies. Reducing carbon emissions is a hot topic that academics and government policy-making departments are concerned about.Through necessary condition analysis (NCA) and fuzzy set qualitative comparative analysis(fsQCA), this paper investigates local governments' configuration linkage effect and path choice to improve carbon emission performance from six dimensions: energy consumption, industrial structure, technological innovation, government support, economic development, and demographic factors. The research findings include the following: (1) Individual condition does not represent necessary conditions for the government's carbon performance. Among the two sets of second-order equivalence configurations(S and Q) (five high-level carbon performance configurations), those dominated by economic development or low energy consumption can produce high-level carbon performance. Therefore, the six antecedent conditions dimensions work together to explain how the government can create high levels of carbon performance. (2)According to the regional comparison, China's eastern, central, and western regions exhibit similarities and differences in the driving forces behind high carbon emission performance. All three regions can demonstrate carbon emission performance when all the factors are combined. However, when constrained by the conditions of each region's resource endowment, the eastern region emphasizes the advantage of economic and technological innovation, the central region favors government support and demographic factors, and the western region prefers upgrading industrial structure based on a specific level of economic development. [ABSTRACT FROM AUTHOR]

In the context of global warming and intensified human activities, glacier instability in plateau regions has increased, and glacier debris flows have become active, which poses a significant threat to the lives and property of people and socioeconomic development. The mass movement process of glacier debris flows is extremely complex, so this paper uses the 2018 Sedongpu glacier debris flow event on the Qinghai-Tibet Plateau as an example and applies a numerical simulation method to invert the whole process of mass movement. In view of the interaction between phases in the process of motion, we use the fluid-solid coupling method to describe the mass movement. The granular-flow model and drift-flux model are employed in FLOW3D software to study the mass movement process of glacier debris flows and explore their dynamic characteristics. The results indicate that the glacier debris flow lasted for 700 s, and the movement process was roughly divided into four stages, including initiation, scraping, surging and deposition; the depositional characteristics calculated by the fluid-solid coupling model are consistent with the actual survey results and have good reliability; strong erosion occurs during the mass movement, the clear volume amplification effect, and the first wave climbs 17.8 m across the slope. The fluid-solid coupling method can better simulate glacier debris flows in plateau regions, which is helpful for the study of the mechanism and dynamic characteristics of such disasters. [ABSTRACT FROM AUTHOR]

Compensatory growth represents the ability of plants to counteract the negative consequences of herbivore damage, contributing to the sustainable development of agriculture. Minor changes in compensatory growth due to environmental changes may significantly impact the structure and functionality of ecosystems, especially for agriculture in a semiarid region. However, there is a lack of systematic quantitative summaries and reviews on compensatory growth mechanisms, especially regarding how they might respond to global environmental changes (e.g. climate warming, drought, nutrient variation, and elevated CO2). This paper summarizes the types of physio-ecological responses of plant compensatory growth to defoliation and their characteristics through a systematic review of existing literature. The review shows that damaged plants that undergo variations in morphological and physiological traits, such as enhanced photosynthesis, increased branching, and altered biomass allocation, may mitigate injury or produce overcompensatory growth. Moderate disturbance and arbuscular mycorrhizal fungus infection rates are beneficial for overcompensation. I further discuss how plant compensatory growth is affected by global change factors, concluding that adequate nutrients and water supply are crucial factors influencing overcompensation. This summary can advance our understanding of the response patterns and mechanisms underlying plant compensatory growth, which is vital for gaining insight into the regenerative capacity of plants and promoting sustainable agricultural development under global environmental changes. [ABSTRACT FROM AUTHOR]

Background: Together with other elevated areas, the Mountains of Central Asia are significantly threatened by ongoing climate change. The presence of refuges during the glaciations makes the region extremely rich in species, especially endemic ones. However, the limited potential for colonisation of other habitats makes rocky-related species with 'island‐like' distribution, particularly vulnerable to climate change. To understand the processes underlying species response to climate warming, we assessed differences in ecological niches and phylogenetic relationship of two geographically disjunctive alpine species belonging to the genus Sergia. The taxa are considered Tertiary relicts, endemic to the Tian Shan and Pamir-Alai Mountains. To illustrate range dynamics and differences in occupied niches of Sergia species, we used Ecological Niche Modelling of current and future distribution. Whereas, to reconstruct the phylogenetic relationship within and between Sergia and other related Campanulaceae species from the region we used molecular data (ITS, cpDNA, DArTseq-derived SNPs). Results: The results reveal that the genus Sergia is a polyphyletic group, and its representatives differ geographically, ecologically and genetically. Both S. regelii and S. sewerzowii constitute a common clade with Asyneuma group, however, S. sewerzowii is more closely related to Campanula alberti (a species that has never previously been considered closely related to the genus Asyneuma or Sergia) than to S. regelii. Sergia sewerzowii is adapted to lower elevations with higher temperatures, while S. regelii prefers higher elevations with lower temperatures. The future distribution models demonstrate a dramatic loss of S. regelii range with a shift to suitable habitats in higher elevations, while the potential range of S. sewerzowii increases and shifts to the north. Conclusions: This study shows that S. regelii and S. sewerzowii have a long and independent evolution history. Sergia regelii and S. sewerzowii significantly differ in realised niches. These differences are mirrored in the response of the studied endemics to future climate warming. As suitable habitats shrink, rapid changes in distribution can lead to species' range loss, which is also directly related to declines in genetic variability. The outcomes of this paper will help to more precisely assess the impact of climate changes on rocky-related plant species found in this world's biodiversity hotspot. [ABSTRACT FROM AUTHOR]