Search

The aim of stock assessment is to provide managers with an understanding of the biomass and age-/size-composition of a stock, stock status (ideally relative to target and reference points), and to support management decision making, often through projections and application of harvest control rules. Stock assessments are increasingly being used to form the basis for the operating models used to evaluate the ability of management strategies to achieve the goals of fisheries management. Stock assessments for rock lobsters were among the first to adopt size-structured population models as the basis for stock assessment, and population model-based stock assessments have been used extensively to evaluate management strategies for rock lobster stocks in the USA, Australia, New Zealand and South Africa. This paper identifies how closely population model-based stock assessments for rock lobsters satisfy the guidelines identified for best practices for conducting stock assessments during meetings of, for example, the Center for the Advancement of Population Assessment Methodology and papers identifying best practice guidelines for stock assessment. The paper highlights some key directions for stock assessment science for rock lobsters, including considerations related to environmental variation and climate change. [ABSTRACT FROM AUTHOR]

• A techno-economic assessment (TEA) tool was developed for AD technology. • Tool is demonstrated specifically in the context of smallholders in South Africa. • Probabilistic simulation of feasibility indicators using a Monte Carlo method. • Risk assessment was conducted using sensitivity analysis and Monte Carlo method. • Stochastic TEA can be used to assessing other AD technologies. Anaerobic digestion (AD) technology holds numerous potential benefits for farmers, however, challenges persist in terms of implementation costs and sustainability in developing countries. This paper presents a probabilistic techno-economic assessment tool for AD. A clear distinction is made between direct financial feasibility and wider (socio) economic feasibility. The tool identifies the technical- and economic factors influencing the returns of a particular AD process as well as the sensitivity of model predictions to variations in the value of the identified factors using a Monte Carlo approach. The tool is applied to assess the feasibility of a smallholder farm-based AD installation under a variety of substrates and operating conditions as an illustrative case study, where on-going flows of costs and benefits were considered over a 15-year period and discounted at a rate of 8%. The results of the case study revealed that the installation of a 10 m3 smallholder farm-based anaerobic digester are likely to be financially and economically viable with a financial benefit-cost ratio of 1.30–1.38 and an economic benefit-cost ratio ranged from 5.49 to 6.01. Risk assessment results confirmed the strong economic feasibility of a smallholder farm-based AD implementation: under the most conservative cost estimates, there is a 73% probability of achieving a financial benefit-cost ratio > 1, while there is a 96.6% probability of achieving an economic benefit-cost ratio > 1. The case study demonstrated the utility of probabilistic techno-economic assessments for informed decision making, a tool which can be readily generalized to other settings. [ABSTRACT FROM AUTHOR]

• The output power is conducted using 3D-PV model. • A new fusion of improved bi-archive multi-objective optimization algorithm is proposed. • A new hybrid MCDM method is considered to choose the most desirable configuration. • An accurate hybrid numerical method is used for validation of the proposed method. • Performance of optimum designs are evaluated for both cases: Malaysia and South Africa. Photovoltaic (PV) and Wind turbine (WT) systems are the most promising options for rural energy delivery. In the literature, numerous studies have simply considered only on economic efficiency, while maximizing dependability by a constant value for the given demand load. Moreover, a single set Pareto optimal front (PF) has been attained for the multi-objective optimization problem. Furthermore, the primary challenge of various the off-grid multiple renewable energy sources is excessive energy loss, resulting over/under sizing and a highly total cost for the system. Therefore, this paper presents a unique improved bi-archive approach to develop the diversity and convergence independently in order to find four optimum sets of PF solutions. In addition, a new integration based on best worst method (BWM) and preference ranking organization for enrichment evaluations (PROMETHEE II) method along with group decision making (GDM) mechanism are addressed to sort and rank the optimal sets PF solutions with full consistency ratios of the three experts opinions and high degree of stability in ranking configurations. The theoretical results based on actual hourly meteorological data in Malaysia and South Africa indicated that the suggested improved two-archive-BWM- PROMETHEE II-GDM method is not only able to construct a uniform set of Pareto optimal solutions with fast convergence and high diversity, but can also rank and select the most desired design for the PV/WT/Battery system. The optimum configurations of the two cases studies are composed of a single WT, 105 PV modules, and 69 batteries storages at zero LLP, 60185 ($) of LLC, and 13548018 (KWh) of P dump for Malaysia case study, meanwhile it composes of 16 WTs, 80 PV modules, and 69 batteries storage at zero of LLP, 66073 ($) of LCC, and 31371 (KWh) of P dump. The proposed standalone hybrid renewable energy sources system is verified and assessed in a comparison with existing hybrid methods in terms of increasing the reliability, lowering overall cost, and reducing wasted energy. [ABSTRACT FROM AUTHOR]

This study aimed to explore the decision-making process of patients with pregnancies affected by serious congenital abnormalities. The study design was an exploratory qualitative study. The sample for this study was pregnant individuals who had a prenatal diagnosis of a serious congenital abnormality and were offered termination of pregnancy. Semi-structured face-to-face interviews with closed and open-ended questions, recorded and transcribed verbatim, were used to collect the data; this was then analyzed using a thematic data analysis approach. Five topics were developed: "Health care services", "Home", "Being a mother", "Finding meaning", and "The aftermath". The first four topics describe the decision-making process where the participants filtered through multiple factors to reach their final decision. Although the participants consulted with their families, partners, and community, they made the final decision themselves. The final topics describes activities which were necessary for closure and coping. This study has provided valuable insight into the decision-making process, which can be used to improve services offered to patients. Information should be communicated clearly with follow-up appointments to discuss further. Healthcare professional should show empathy and assure the participants that their decision is supported. • There are limited qualitative data on termination of pregnancy decision-making for serious congenital abnormalities in the African setting. • This paper provides insight into the decision-making process of pregnant individuals from the Western Cape, South Africa. • Decision-making for terminating pregnancy affected by congenital abnormality is multifaceted but with one deciding factor. • Contrary to what is anecdotally expected, in this study the participants made the final decision. • Tragic optimism was necessary for the participants to carry on with their lives. [ABSTRACT FROM AUTHOR]

• GCAOA is applied for parameter extraction of the TD PV model to predict the output current of the PV model. • Non-dominated multi-objective principle is proposed for constructing sets of Pareto optimal solutions using three conflicting objectives. • A new integration based on MOO and MCDM aided by numerical methods are considered to choose the most desirable configuration. • MODA based on AHP-VICKOR-GDM method is used for validation of the proposed method. • Performance of optimum designs are evaluated using hourly meteorological data for one year. This paper presents a new optimum design for an off-grid hybrid solar photovoltaic (PV), wind turbine (WT), and battery storage system for power isolated dwellings in Malaysia and South Africa. Selecting a desirable design of the WT/PV/Battery system among a wide variety of configurations, particularly at a favorable level of reliability, lowering the total cost, and reducing the surplus energy, remains a challenging task. The procedure of this work is summarized as follows: First, the parameter of the three diode PV model is optimally extracted from datasheet information to forecast the output power of the Yingli PV module. Then, the upper and lower variables bounds of the WT/PV/Battery system are intuitively determined. Afterward, the numerical method is employed to identify every possible configurations inside the design space. The non-dominated multi-objective principle is then established to generate optimal sets of Pareto front solutions. Finally, an integration of the best worst method, technique for order of preference by similarity to ideal solution, and group decision making technique are employed to weight the objectives with complete consistency ratios and rank the optimal designs based on practical judgments. The performance results showed that the optimal designs are comprised of 1 WTs, 105 PV modules (21 in series and 5 in parallel), and 69 storage batteries with zero loss of load probability (LLP), 60185.47 ($) of life cycle cost (LCC), and 13548017.77 KWh of excess energy for Malaysian scenario. While the optimum configuration of the South African case study consists of 16 WTs, 80 PV modules (20 in series and 4 in parallel), and 69 storage batteries with a favorable LLP values of 0.00068, 59180.15 ($) of LCC, and 19174160.54 ($) of excess energy, respectively. It can be concluded that the proposed methodology for finding appropriate size of the WT/PV/Battery system is capable of operating with extremely confident dependability while minimizing the overall cost of the system and minimizing the surplus energy. [ABSTRACT FROM AUTHOR]