Search

Oil–paper insulation is the critical insulation element in the modern power system. Under a harsh operating environment, oil–paper insulation will deteriorate gradually, resulting in electrical accidents. Thus, it is important to evaluate and monitor the insulation state of oil–paper insulation. Firstly, this paper introduces the geometric structure and physical components of oil–paper insulation and shows the main reasons and forms of oil–paper insulation's degradation. Then, this paper reviews the existing condition assessment techniques for oil–paper insulation, such as the dissolved gas ratio analysis, aging kinetic model, cellulose–water adsorption isotherm, oil–paper moisture balance curve, and dielectric response technique. Additionally, the advantages and limitations of the above condition assessment techniques are discussed. In particular, this paper highlights the dielectric response technique and introduces its evaluation principle in detail: (1) collecting the dielectric response data, (2) extracting the feature parameters from the collected dielectric response data, and (3) establishing the condition assessment models based on the extracted feature parameters and the machine learning techniques. Finally, two full potential studies are proposed, which research hotspots' oil–paper insulation and the electrical–chemical joint evaluation technique. In summary, this paper concludes the principles, advantages and limitation of the existing condition assessment techniques for oil–paper insulation, and we put forward two potential research avenues. [ABSTRACT FROM AUTHOR]

The research groups in computer vision, graphics, and machine learning have dedicated a substantial amount of attention to the areas of 3D object reconstruction, augmentation, and registration. Deep learning is the predominant method used in artificial intelligence for addressing computer vision challenges. However, deep learning on three-dimensional data presents distinct obstacles and is now in its nascent phase. There have been significant advancements in deep learning specifically for three-dimensional data, offering a range of ways to address these issues. This study offers a comprehensive examination of the latest advancements in deep learning methodologies. We examine many benchmark models for the tasks of 3D object registration, augmentation, and reconstruction. We thoroughly analyse their architectures, advantages, and constraints. In summary, this report provides a comprehensive overview of recent advancements in three-dimensional deep learning and highlights unresolved research areas that will need to be addressed in the future. [ABSTRACT FROM AUTHOR]

Forest biomass estimation is undoubtedly one of the most pressing research subjects at present. Combining multi-source remote sensing information can give full play to the advantages of different remote sensing technologies, providing more comprehensive and rich information for aboveground biomass (AGB) estimation research. Based on Landsat 8, Sentinel-2A, and ALOS2 PALSAR data, this paper takes the artificial coniferous forests in the Saihanba Forest of Hebei Province as the object of study, fully explores and establishes remote sensing factors and information related to forest structure, gives full play to the advantages of spectral signals in detecting the horizontal structure and multi-dimensional synthetic aperture radar (SAR) data in detecting the vertical structure, and combines environmental factors to carry out multivariate synergistic methods of estimating the AGB. This paper uses three variable selection methods (Pearson correlation coefficient, random forest significance, and the least absolute shrinkage and selection operator (LASSO)) to establish the variable sets, combining them with three typical non-parametric models to estimate AGB, namely, random forest (RF), support vector regression (SVR), and artificial neural network (ANN), to analyze the effect of forest structure on biomass estimation, explore the suitable AGB of artificial coniferous forests estimation of machine learning models, and develop the method of quantifying saturation value of the combined variables. The results show that the horizontal structure is more capable of explaining the AGB compared to the vertical structure information, and that combining the multi-structure information can improve the model results and the saturation value to a great extent. In this study, different sets of variables can produce relatively superior results in different models. The variable set selected using LASSO gives the best results in the SVR model, with an R 2 values of 0.9998 and 0.8792 for the training and the test set, respectively, and the highest saturation value obtained is 185.73 t/ha, which is beyond the range of the measured data. The problem of saturation in biomass estimation in boreal medium- and high-density forests was overcome to a certain extent, and the AGB of the Saihanba area was better estimated. [ABSTRACT FROM AUTHOR]

Soil moisture (SM) is a key variable driving hydrologic, climatic, and ecological processes. Although it is highly variable, both spatially and temporally, there is limited data availability to inform about SM conditions at adequate spatial and temporal scales over large regions. Satellite SM retrievals, especially L-band microwave remote sensing, has emerged as a feasible solution to offer spatially continuous global-scale SM information. However, the coarse spatial resolution of these L-band microwave SM retrievals poses uncertainties in many regional- and local-scale SM applications which require a high amount of spatial details. Numerous studies have been conducted to develop downscaling algorithms to enhance the spatial resolution of coarse-resolution satellite-derived SM datasets. Machine Learning (ML)-based downscaling models have gained prominence recently due to their ability to capture non-linear, complex relationships between SM and its driving factors, such as vegetation, surface temperature, topography, and climatic conditions. This review paper presents a comprehensive review of the ML-based approaches used in SM downscaling. The usage of classical, ensemble, neural nets, and deep learning methods to downscale SM products and the comparison of multiple algorithms are detailed in this paper. Insights into the significance of surface ancillary variables for model accuracy and the improvements made to ML-based SM downscaling approaches are also discussed. Overall, this paper provides useful insights for future studies on developing reliable, high-spatial-resolution SM datasets using ML-based algorithms. [ABSTRACT FROM AUTHOR]

Enhancing the management and monitoring of oil and gas processes demands the development of precise predictive analytic techniques. Over the past two years, oil and its prediction have advanced significantly using conventional and modern machine learning techniques. Several review articles detail the developments in predictive maintenance and the technical and non-technical aspects of influencing the uptake of big data. The absence of references for machine learning techniques impacts the effective optimization of predictive analytics in the oil and gas sectors. This review paper offers readers thorough information on the latest machine learning methods utilized in this industry's predictive analytical modeling. This review covers different forms of machine learning techniques used in predictive analytical modeling from 2021 to 2023 (91 articles). It provides an overview of the details of the papers that were reviewed, describing the model's categories, the data's temporality, field, and name, the dataset's type, predictive analytics (classification, clustering, or prediction), the models' input and output parameters, the performance metrics, the optimal model, and the model's benefits and drawbacks. In addition, suggestions for future research directions to provide insights into the potential applications of the associated knowledge. This review can serve as a guide to enhance the effectiveness of predictive analytics models in the oil and gas industries. [ABSTRACT FROM AUTHOR]

Cardiovascular diseases (CVDs) are the leading cause of premature death and disability globally, leading to significant increases in healthcare costs and economic strains. Artificial intelligence (AI) is emerging as a crucial technology in this context, promising to have a significant impact on the management of CVDs. A wide range of methods can be used to develop effective models for medical applications, encompassing everything from predicting and diagnosing diseases to determining the most suitable treatment for individual patients. This literature review synthesizes findings from multiple studies that apply AI technologies such as machine learning algorithms and neural networks to electrocardiograms, echocardiography, coronary angiography, computed tomography, and cardiac magnetic resonance imaging. A narrative review of 127 articles identified 31 papers that were directly relevant to the research, encompassing a broad spectrum of AI applications in cardiology. These applications included AI models for ECG, echocardiography, coronary angiography, computed tomography, and cardiac MRI aimed at diagnosing various cardiovascular diseases such as coronary artery disease, hypertrophic cardiomyopathy, arrhythmias, pulmonary embolism, and valvulopathies. The papers also explored new methods for cardiovascular risk assessment, automated measurements, and optimizing treatment strategies, demonstrating the benefits of AI technologies in cardiology. In conclusion, the integration of artificial intelligence (AI) in cardiology promises substantial advancements in diagnosing and treating cardiovascular diseases. [ABSTRACT FROM AUTHOR]

Addressing the formidable challenges posed by multiple jammers jamming multiple radars, which arise from spatial discretization, many degrees of freedom, numerous model input parameters, and the complexity of constraints, along with a multi-peaked objective function, this paper proposes a cooperative jamming resource allocation method, based on evolutionary reinforcement learning, that uses joint multi-domain information. Firstly, an adversarial scenario model is established, characterizing the interaction between multiple jammers and radars based on a multi-beam jammer model and a radar detection model. Subsequently, considering real-world scenarios, this paper analyzes the constraints and objective function involved in cooperative jamming resource allocation by multiple jammers. Finally, accounting for the impact of spatial, frequency, and energy domain information on jamming resource allocation, matrices representing spatial condition constraints, jamming beam allocation, and jamming power allocation are formulated to characterize the cooperative jamming resource allocation problem. Based on this foundation, the joint allocation of the jamming beam and jamming power is optimized under the constraints of jamming resources. Through simulation experiments, it was determined that, compared to the dung beetle optimizer (DBO) algorithm and the particle swarm optimization (PSO) algorithm, the proposed evolutionary reinforcement learning algorithm based on DBO and Q-Learning (DBO-QL) offers 3.03% and 6.25% improvements in terms of jamming benefit and 26.33% and 50.26% improvements in terms of optimization success rate, respectively. In terms of algorithm response time, the proposed hybrid DBO-QL algorithm has a response time of 0.11 s, which is 97.35% and 96.57% lower than the response times of the DBO and PSO algorithms, respectively. The results show that the method proposed in this paper has good convergence, stability, and timeliness. [ABSTRACT FROM AUTHOR]

Background: Artificial intelligence (AI) can radically change almost every aspect of the human experience. In the medical field, there are numerous applications of AI and subsequently, in a relatively short time, significant progress has been made. Cardiology is not immune to this trend, this fact being supported by the exponential increase in the number of publications in which the algorithms play an important role in data analysis, pattern discovery, identification of anomalies, and therapeutic decision making. Furthermore, with technological development, there have appeared new models of machine learning (ML) and deep learning (DP) that are capable of exploring various applications of AI in cardiology, including areas such as prevention, cardiovascular imaging, electrophysiology, interventional cardiology, and many others. In this sense, the present article aims to provide a general vision of the current state of AI use in cardiology. Results: We identified and included a subset of 200 papers directly relevant to the current research covering a wide range of applications. Thus, this paper presents AI applications in cardiovascular imaging, arithmology, clinical or emergency cardiology, cardiovascular prevention, and interventional procedures in a summarized manner. Recent studies from the highly scientific literature demonstrate the feasibility and advantages of using AI in different branches of cardiology. Conclusions: The integration of AI in cardiology offers promising perspectives for increasing accuracy by decreasing the error rate and increasing efficiency in cardiovascular practice. From predicting the risk of sudden death or the ability to respond to cardiac resynchronization therapy to the diagnosis of pulmonary embolism or the early detection of valvular diseases, AI algorithms have shown their potential to mitigate human error and provide feasible solutions. At the same time, limits imposed by the small samples studied are highlighted alongside the challenges presented by ethical implementation; these relate to legal implications regarding responsibility and decision making processes, ensuring patient confidentiality and data security. All these constitute future research directions that will allow the integration of AI in the progress of cardiology. [ABSTRACT FROM AUTHOR]

The methods of artificial intelligence (AI) have been used in the planning and operation of electric power systems for more than 40 years. In recent years, due to the development of microprocessor and data storage technologies, the effectiveness of this use has greatly increased. This paper provides a systematic overview of the application of AI, including the use of machine learning (ML) in the electric power system. The potential application areas are divided into four blocks and the classification matrix has been used for clustering the AI application tasks. Furthermore, the data acquisition methods for setting the parameters of AI and ML algorithms are presented and discussed in a systematic way, considering the supervised and unsupervised learning methods. Based on this, three complex application examples, being wind power generation forecasting, smart grid security assessment (using two methods), and automatic system fault detection are presented and discussed in detail. A summary and outlook conclude the paper. [ABSTRACT FROM AUTHOR]

This document discusses the degradation and failure mechanisms of dielectric insulation in medium- and high-voltage power equipment. It highlights the importance of controlling insulation material degradation to prevent equipment failures and reduce the risk of environmental pollution. The document includes several research papers that address various topics related to the measurement, monitoring, and improvement of power equipment components. These papers cover issues such as winding breakdown faults in transformers, overvoltages caused by vacuum circuit breaker interruptions, insulation resistance degradation in cables, temperature rise in composite insulators, partial discharges and their effects on insulation, and acoustic inspection for detecting partial discharges. The document also presents studies on the technical condition of on-load tap changers, the behavior of silicone elastomers under electrical and mechanical stress, and the percolation phenomenon in square matrices. [Extracted from the article]

With the continuous development of automotive intelligence, vehicle occupant detection technology has received increasing attention. Despite various types of research in this field, a simple, reliable, and highly private detection method is lacking. This paper proposes a method for vehicle occupant detection using millimeter-wave radar. Specifically, the paper outlines the system design for vehicle occupant detection using millimeter-wave radar. By collecting the raw signals of FMCW radar and applying Range-FFT and DoA estimation algorithms, a range–azimuth heatmap was generated, visually depicting the current status of people inside the vehicle. Furthermore, utilizing the collected range–azimuth heatmap of passengers, this paper integrates the Faster R-CNN deep learning networks with radar signal processing to identify passenger information. Finally, to test the performance of the detection method proposed in this article, an experimental verification was conducted in a car and the results were compared with those of traditional machine learning algorithms. The findings indicated that the method employed in this experiment achieves higher accuracy, reaching approximately 99%. [ABSTRACT FROM AUTHOR]

In today's world, a significant amount of global energy is used in buildings. Unfortunately, a lot of this energy is wasted, because electrical appliances are not used properly or efficiently. One way to reduce this waste is by detecting, learning, and predicting when people are present in buildings. To do this, buildings need to become "smart" and "cognitive" and use modern technologies to sense when and how people are occupying the buildings. By leveraging this information, buildings can make smart decisions based on recently developed methods. In this paper, we provide a comprehensive overview of recent advancements in Internet of Things (IoT) technologies that have been designed and used for the monitoring of indoor environmental conditions within buildings. Using these technologies is crucial to gathering data about the indoor environment and determining the number and presence of occupants. Furthermore, this paper critically examines both the strengths and limitations of each technology in predicting occupant behavior. In addition, it explores different methods for processing these data and making future occupancy predictions. Moreover, we highlight some challenges, such as determining the optimal number and location of sensors and radars, and provide a detailed explanation and insights into these challenges. Furthermore, the paper explores possible future directions, including the security of occupants' data and the promotion of energy-efficient practices such as localizing occupants and monitoring their activities within a building. With respect to other survey works on similar topics, our work aims to both cover recent sensory approaches and review methods used in the literature for estimating occupancy. [ABSTRACT FROM AUTHOR]

Giga-casting, a revolutionary approach for manufacturing large, single-piece car body components from aluminium, has emerged as a potential game-changer in the automotive industry. However, these large, thin-walled castings are prone to distortions during solidification and heat treatment processes. Straightening these distortions is crucial to ensure structural integrity, facilitate downstream assembly, and maintain aesthetic qualities. This paper proposes a novel method for straightening giga-cast components using a multi-pin straightening machine. The machine's versatility stems from its ability to adapt to various geometries through multiple strategically controlled straightening pins. This paper introduces the concept of a "straightening stroke decision algorithm" to achieve precise straightening and overcome the challenges of complex shapes. This algorithm determines the stroke length for each pin, combining a polynomial model representing the global stiffness of the component with a machine learning model that captures the stiffness changes arising from the current geometry. The effectiveness of the proposed approach is evaluated through comprehensive numerical experiments using finite element analyses. The straightening performance is assessed for the straightening algorithm with different machine learning models (deep neural network and XGBoost) and compared to a traditional optimisation method. The proposed surrogate models decided the straightening strokes so that the maximum remaining distortion became 0.02% of the largest dimension of each target geometry. The results of the numerical experiment showed that the proposed straightening method is suitable for straightening distortion in large thin-walled components. [ABSTRACT FROM AUTHOR]

Self-supervised learning is a new machine learning method that does not rely on manually labeled data, and learns from rich unlabeled data itself by designing agent tasks using the input data as supervision to obtain a more generalized representation for application in downstream tasks. However, the current self-supervised learning suffers from the problem of relying on the selection and number of negative samples and the problem of sample bias phenomenon after graph data augmentation. In this paper, we investigate the above problems and propose a corresponding solution, proposing a graph contrastive learning algorithm without negative samples. The model uses matrix sketching in the implicit space for feature augmentation to reduce sample bias and iteratively trains the mutual correlation matrix of two viewpoints by drawing closer to the distance of the constant matrix as the objective function. This method does not require techniques such as negative samples, gradient stopping, and momentum updating to prevent self-supervised model collapse. This method is compared with 10 graph representation learning algorithms on four datasets for node classification tasks, and the experimental results show that the algorithm proposed in this paper achieves good results. [ABSTRACT FROM AUTHOR]

The level of difficulty of mathematical test items is a critical aspect for evaluating test quality and educational outcomes. Accurately predicting item difficulty during test creation is thus significantly important for producing effective test papers. This study used more than ten years of content and score data from China's Henan Provincial College Entrance Examination in Mathematics as an evaluation criterion for test difficulty, and all data were obtained from the Henan Provincial Department of Education. Based on the framework established by the National Center for Education Statistics (NCES) for test item assessment methodology, this paper proposes a new framework containing eight features considering the uniqueness of mathematics. Next, this paper proposes an XGBoost-based SHAP model for analyzing the difficulty of mathematics tests. By coupling the XGBoost method with the SHAP method, the model not only evaluates the difficulty of mathematics tests but also analyzes the contribution of specific features to item difficulty, thereby increasing transparency and mitigating the "black box" nature of machine learning models. The model has a high prediction accuracy of 0.99 for the training set and 0.806 for the test set. With the model, we found that parameter-level features and reasoning-level features are significant factors influencing the difficulty of subjective items in the exam. In addition, we divided senior secondary mathematics knowledge into nine units based on Chinese curriculum standards and found significant differences in the distribution of the eight features across these different knowledge units, which can help teachers place different emphasis on different units during the teaching process. In summary, our proposed approach significantly improves the accuracy of item difficulty prediction, which is crucial for intelligent educational applications such as knowledge tracking, automatic test item generation, and intelligent paper generation. These results provide tools that are better aligned with and responsive to students' learning needs, thus effectively informing educational practice. [ABSTRACT FROM AUTHOR]

Pattern recognition systems always misclassify anomalies, which can be dangerous for uninformed users. Therefore, anomalies must be filtered out from each classification. The main challenge for the anomaly filter design is the huge number of possible anomaly samples compared with the number of samples in the training set. Tailoring the filter for the given classifier is just the first step in this reduction. Paper tests the hypothesis that the filter trained in avoiding "near" anomalies will also refuse the "far" anomalies, and the anomaly detector is then just a classifier distinguishing between "far real" and "near anomaly" samples. As a "far real" samples generator was used, a Generative Adversarial Network (GAN) fake generator that transforms normally distributed random seeds into fakes similar to the training samples. The paper proves the assumption that seeds unused in fake training will generate anomalies. These seeds are distinguished according to their Chebyshev norms. While the fakes have seeds within the hypersphere with a given radius, the near anomalies have seeds within the sphere near cover. Experiments with various anomaly test sets have shown that GAN-based anomaly detectors create a reliable anti-anomaly shield using the abovementioned assumptions. The proposed anomaly detector is tailored to the given classifier, but its limitation is due to the need for the availability of the database on which the classifier was trained. [ABSTRACT FROM AUTHOR]

Accurately predicting the price of carbon is an effective way of ensuring the stability of the carbon trading market and reducing carbon emissions. Aiming at the non-smooth and non-linear characteristics of carbon price, this paper proposes a novel hybrid prediction model based on improved feature extraction and non-linear integration, which is built on complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN), fuzzy entropy (FuzzyEn), improved random forest using particle swarm optimisation (PSORF), extreme learning machine (ELM), long short-term memory (LSTM), non-linear integration based on multiple linear regression (MLR) and random forest (MLRRF), and error correction with the autoregressive integrated moving average model (ARIMA), named CEEMDAN-FuzzyEn-PSORF-ELM-LSTM-MLRRF-ARIMA. Firstly, CEEMDAN is combined with FuzzyEn in the feature selection process to improve extraction efficiency and reliability. Secondly, at the critical prediction stage, PSORF, ELM, and LSTM are selected to predict high, medium, and low complexity sequences, respectively. Thirdly, the reconstructed sequences are assembled by applying MLRRF, which can effectively improve the prediction accuracy and generalisation ability. Finally, error correction is conducted using ARIMA to obtain the final forecasting results, and the Diebold–Mariano test (DM test) is introduced for a comprehensive evaluation of the models. With respect to carbon prices in the pilot regions of Shenzhen and Hubei, the results indicate that the proposed model has higher prediction accuracy and robustness. The main contributions of this paper are the improved feature extraction and the innovative combination of multiple linear regression and random forests into a non-linear integrated framework for carbon price forecasting. However, further optimisation is still a work in progress. [ABSTRACT FROM AUTHOR]

As the demand for electricity, electrification, and renewable energy rises, accurate forecasting and flexible energy management become imperative. Distribution network operators face capacity limits set by regional grids, risking economic penalties if exceeded. This study examined data-driven approaches of load forecasting to address these challenges on a city scale through a use case study of Eskilstuna, Sweden. Multiple Linear Regression was used to model electric load data, identifying key calendar and meteorological variables through a rolling origin validation process, using three years of historical data. Despite its low cost, Multiple Linear Regression outperforms the more expensive non-linear Light Gradient Boosting Machine, and both outperform the "weekly Naïve" benchmark with a relative Root Mean Square Errors of 32–34% and 39–40%, respectively. Best-practice hyperparameter settings were derived, and they emphasize frequent re-training, maximizing the training data size, and setting a lag size larger than or equal to the forecast horizon for improved accuracy. Combining both models into an ensemble could the enhance accuracy. This paper demonstrates that robust load forecasts can be achieved by leveraging domain knowledge and statistical analysis, utilizing readily available machine learning libraries. The methodology for achieving this is presented within the paper. These models have the potential for economic optimization and load-shifting strategies, offering valuable insights into sustainable energy management. [ABSTRACT FROM AUTHOR]

Water constitutes an indispensable resource crucial for the sustenance of humanity, as it plays an integral role in various sectors such as agriculture, industrial processes, and domestic consumption. Even though water covers 71% of the global land surface, governments have been grappling with the challenge of ensuring the provision of safe water for domestic use. A contributing factor to this situation is the persistent contamination of available water sources rendering them unfit for human consumption. A common contaminant, pesticides are not frequently tested for despite their serious effects on biodiversity. Pesticide determination in water quality assessment is a challenging task because the procedures involved in the extraction and detection are complex. This reduces their popularity in many monitoring campaigns despite their harmful effects. If the existing methods of pesticide analysis are adapted by leveraging new technologies, then information concerning their presence in water ecosystems can be exposed. Furthermore, beyond the advantages conferred by the integration of wireless sensor networks (WSNs), the Internet of Things (IoT), Machine Learning (ML), and big data analytics, a notable outcome is the attainment of a heightened degree of granularity in the information of water ecosystems. This paper discusses methods of pesticide detection in water, emphasizing the possible use of electrochemical sensors, biosensors, and paper-based sensors in wireless sensing. It also explores the application of WSNs in water, the IoT, computing models, ML, and big data analytics, and their potential for integration as technologies useful for pesticide monitoring in water. [ABSTRACT FROM AUTHOR]

Soil salinization has seriously affected agricultural production and ecological balance in the Yellow River Delta region. Rapid and accurate monitoring of soil salinity has become an urgent need. Traditional machine learning models tend to fall into local optimal values during the learning process, which reduces their accuracy. This paper introduces Circle map to enhance the crayfish optimization algorithm (COA), which is then integrated with the regularized extreme learning machine (RELM) model, aiming to improve the accuracy of soil salinity content (SSC) inversion in the Yellow River Delta region. We employed Landsat5 TM remote sensing images and measured salinity data to develop spectral indices, such as the band index, salinity index, vegetation index, and comprehensive index, selecting the optimal modeling variable group through Pearson correlation analysis and variable projection importance analysis. The back propagation neural network (BPNN), RELM, and improved crayfish optimization algorithm–regularized extreme learning machine (ICOA-RELM) models were constructed using measured data and selected variable groups for SSC inversion. The results indicate that the ICOA-RELM model enhances the R 2 value by an average of about 0.1 compared to other models, particularly those using groups of variables filtered by variable projection importance analysis as input variables, which showed the best inversion effect (test set R 2 value of 0.75, MAE of 0.198, RMSE of 0.249). The SSC inversion results indicate a higher salinization degree in the coastal regions of the Yellow River Delta and a lower degree in the inland areas, with moderate saline soil and severe saline soil comprising 48.69% of the total area. These results are consistent with the actual sampling results, which verify the practicability of the model. This paper's methods and findings introduce an innovative and practical tool for monitoring and managing salinized soils in the Yellow River Delta, offering significant theoretical and practical benefits. [ABSTRACT FROM AUTHOR]

Underwater acoustic (UWA) channel prediction technology, as an important topic in UWA communication, has played an important role in UWA adaptive communication network and underwater target perception. Although many significant advancements have been achieved in underwater acoustic channel prediction over the years, a comprehensive summary and introduction is still lacking. As the first comprehensive overview of UWA channel prediction, this paper introduces past works and algorithm implementation methods of channel prediction from the perspective of linear, kernel-based, and deep learning approaches. Importantly, based on available at-sea experiment datasets, this paper compares the performance of current primary UWA channel prediction algorithms under a unified system framework, providing researchers with a comprehensive and objective understanding of UWA channel prediction. Finally, it discusses the directions and challenges for future research. The survey finds that linear prediction algorithms are the most widely applied, and deep learning, as the most advanced type of algorithm, has moved this field into a new stage. The experimental results show that the linear algorithms have the lowest computational complexity, and when the training samples are sufficient, deep learning algorithms have the best prediction performance. [ABSTRACT FROM AUTHOR]

The interconnection of Operational Technology (OT) and Information Technology (IT) has created new opportunities for remote management, data storage in the cloud, real-time data transfer over long distances, or integration between different OT and IT networks. OT networks require increased attention due to the convergence of IT and OT, mainly due to the increased risk of cyber-attacks targeting these networks. This paper focuses on the analysis of different methods and data processing for protocol recognition and traffic classification in the context of OT specifics. Therefore, this paper summarizes the methods used to classify network traffic, analyzes the methods used to recognize and identify the protocol used in the industrial network, and describes machine learning methods to recognize industrial protocols. The output of this work is a comparative analysis of approaches specifically for protocol recognition and traffic classification in OT networks. In addition, publicly available datasets are compared in relation to their applicability for industrial protocol recognition. Research challenges are also identified, highlighting the lack of relevant datasets and defining directions for further research in the area of protocol recognition and classification in OT environments. [ABSTRACT FROM AUTHOR]

In decentralized systems, the quest for heightened security and integrity within blockchain networks becomes an issue. This survey investigates anomaly detection techniques in blockchain ecosystems through the lens of unsupervised learning, delving into the intricacies and going through the complex tapestry of abnormal behaviors by examining avant-garde algorithms to discern deviations from normal patterns. By seamlessly blending technological acumen with a discerning gaze, this survey offers a perspective on the symbiotic relationship between unsupervised learning and anomaly detection by reviewing this problem with a categorization of algorithms that are applied to a variety of problems in this field. We propose that the use of unsupervised algorithms in blockchain anomaly detection should be viewed not only as an implementation procedure but also as an integration procedure, where the merits of these algorithms can effectively be combined in ways determined by the problem at hand. In that sense, the main contribution of this paper is a thorough study of the interplay between various unsupervised learning algorithms and how this can be used in facing malicious activities and behaviors within public and private blockchain networks. The result is the definition of three categories, the characteristics of which are recognized in terms of the way the respective integration takes place. When implementing unsupervised learning, the structure of the data plays a pivotal role. Therefore, this paper also provides an in-depth presentation of the data structures commonly used in unsupervised learning-based blockchain anomaly detection. The above analysis is encircled by a presentation of the typical anomalies that have occurred so far along with a description of the general machine learning frameworks developed to deal with them. Finally, the paper spotlights challenges and directions that can serve as a comprehensive compendium for future research efforts. [ABSTRACT FROM AUTHOR]

With the development of artificial intelligence (AI), deep learning is widely used in various industries. At CRYPTO 2019, researchers used deep learning to analyze the block cipher for the first time and constructed a differential neural network distinguisher to meet a certain accuracy. In this paper, a mixture differential neural network distinguisher using ResNet is proposed to further improve the accuracy by exploring the mixture differential properties. Experiments are conducted on SIMON32/64, and the accuracy of the 8-round mixture differential neural network distinguisher is improved from 74.7% to 92.3%, compared with that of the previous differential neural network distinguisher. The prediction accuracy of the differential neural network distinguisher is susceptible to the choice of the specified input differentials, whereas the mixture differential neural network distinguisher is less affected by the input difference and has greater robustness. Furthermore, by combining the probabilistic expansion of rounds and the neutral bit, the obtained mixture differential neural network distinguisher is extended to 11 rounds, which can realize the 12-round actual key recovery attack on SIMON32/64. With an appropriate increase in the time complexity and data complexity, the key recovery accuracy of the mixture differential neural network distinguisher can be improved to 55% as compared to 52% of the differential neural network distinguisher. The mixture differential neural network distinguisher proposed in this paper can also be applied to other lightweight block ciphers. [ABSTRACT FROM AUTHOR]

In South Korea, the rapid proliferation of smartphones has led to an uptick in messenger phishing attacks associated with electronic communication financial scams. In response to this, various phishing detection algorithms have been proposed. However, collecting messenger phishing data poses challenges due to concerns about its potential use in criminal activities. Consequently, a Korean phishing dataset can be composed of imbalanced data, where the number of general messages might outnumber the phishing ones. This class imbalance problem and data scarcity can lead to overfitting issues, making it difficult to achieve high performance. To solve this problem, this paper proposes a phishing messages classification method using Biased Discriminant Analysis without resorting to data augmentation techniques. In this paper, by optimizing the parameters for BDA, we achieved exceptionally high performances in the phishing messages classification experiment, with 95.45% for Recall and 96.85% for the BA metric. Moreover, when compared with other algorithms, the proposed method demonstrated robustness against overfitting due to the class imbalance problem and exhibited minimal performance disparity between training and testing datasets. [ABSTRACT FROM AUTHOR]

A deep learning-based Visual Inertial SLAM technique is proposed in this paper to ensure accurate autonomous localization of mobile robots in environments with dynamic objects. Addressing the limitations of real-time performance in deep learning algorithms and the poor robustness of pure visual geometry algorithms, this paper presents a deep learning-based Visual Inertial SLAM technique. Firstly, a non-blocking model is designed to extract semantic information from images. Then, a motion probability hierarchy model is proposed to obtain prior motion probabilities of feature points. For image frames without semantic information, a motion probability propagation model is designed to determine the prior motion probabilities of feature points. Furthermore, considering that the output of inertial measurements is unaffected by dynamic objects, this paper integrates inertial measurement information to improve the estimation accuracy of feature point motion probabilities. An adaptive threshold-based motion probability estimation method is proposed, and finally, the positioning accuracy is enhanced by eliminating feature points with excessively high motion probabilities. Experimental results demonstrate that the proposed algorithm achieves accurate localization in dynamic environments while maintaining real-time performance. [ABSTRACT FROM AUTHOR]

This document is an editorial for a special issue titled "Machine Learning in Computer Vision and Image Sensing: Theory and Applications." The editorial highlights the diverse applications of machine learning (ML) models in various domains such as medical imaging, signal processing, remote sensing, and human activity detection. The special issue includes 11 papers that cover topics such as image segmentation, fluvial navigation, Alzheimer's disease classification, pneumothorax detection, lung cancer malignancy prediction, amniotic fluid volume detection, COVID-19 detection, and Parkinson's disease detection. The papers showcase the progress and potential of ML models in computer vision applications and provide valuable insights for future research. [Extracted from the article]

This paper investigates a method for precise mapping of human arm movements using sEMG signals. A multi-channel approach captures the sEMG signals, which, combined with the accurately calculated joint angles from an Inertial Measurement Unit, allows for action recognition and mapping through deep learning algorithms. Firstly, signal acquisition and processing were carried out, which involved acquiring data from various movements (hand gestures, single-degree-of-freedom joint movements, and continuous joint actions) and sensor placement. Then, interference signals were filtered out through filters, and the signals were preprocessed using normalization and moving averages to obtain sEMG signals with obvious features. Additionally, this paper constructs a hybrid network model, combining Convolutional Neural Networks and Artificial Neural Networks, and employs a multi-feature fusion algorithm to enhance the accuracy of gesture recognition. Furthermore, a nonlinear fitting between sEMG signals and joint angles was established based on a backpropagation neural network, incorporating momentum term and adaptive learning rate adjustments. Finally, based on the gesture recognition and joint angle prediction model, prosthetic arm control experiments were conducted, achieving highly accurate arm movement prediction and execution. This paper not only validates the potential application of sEMG signals in the precise control of robotic arms but also lays a solid foundation for the development of more intuitive and responsive prostheses and assistive devices. [ABSTRACT FROM AUTHOR]

In this paper, a CatBoost model for predicting superelastic strains of alloys was established by utilizing features construction and selection as well as model filtering and evaluation based on 125 existing data points of superelastic titanium alloys. The alloy compositions of a TiNbMoZrSnTa system were optimized and three nickel-free titanium alloys with potentially excellent superelastic properties were designed using the Bayesian optimization algorithm using a superelastic strain as the optimization target. The experimental results indicated that only Ti-12Nb-18Zr-2Sn and Ti-12Nb-16Zr-3Sn exhibited clear superelasticity due to the absence of relevant information about the alloys' β stability in the machine learning model. Through experimental optimization of the heat treatment regimens, Ti-12Nb-18Zr-2Sn and Ti-12Nb-16Zr-3Sn ultimately achieved recovery strains of 4.65% after being heat treated at 853 K for 10 min and 3.01% after being heat treated at 1073 K for 30 min, respectively. The CatBoost model in this paper possessed a certain ability to design nickel-free superelastic titanium alloys but it was still necessary to combine it with existing knowledge of material theory for effective utilization. [ABSTRACT FROM AUTHOR]

This document is a summary of a special issue on advanced machine learning and deep learning techniques for remote sensing. The issue includes 16 research papers that cover a range of topics, including hyperspectral image classification, moving point target detection, radar echo extrapolation, and remote sensing object detection. Each paper introduces a novel approach or model and provides extensive testing and evaluation to demonstrate its effectiveness. The insights shared in this special issue are expected to contribute to future advancements in artificial intelligence-based remote sensing research. [Extracted from the article]

With the development of smart grids and new power systems, the combination of non-intrusive load identification technology and smart home technology can provide users with the operating conditions of home appliances and equipment, thus reducing home energy loss and improving users' ability to demand a response. This paper proposes a non-intrusive load decomposition model with a parallel multiscale attention mechanism (PMAM). The model can extract both local and global feature information and fuse it through a parallel multiscale network. This improves the attention mechanism's ability to capture feature information over long time periods. To validate the model's decomposition ability, we combined the PMAM model with four benchmark models: the Long Short-Term Memory (LSTM) recurrent neural network model, the Time Pooling-based Load Disaggregation Model (TPNILM), the Extreme Learning Machine (ELM), and the Load Disaggregation Model without Parallel Multi-scalar Attention Mechanisms (UNPMAM). The model was trained on the publicly available UK-DALE dataset and tested. The models' test results were quantitatively evaluated using a confusion matrix. This involved calculating the F1 score of the load decomposition. A higher F1 score indicates better model decomposition performance. The results indicate that the PMAM model proposed in this paper maintains an F1 score above 0.9 for the decomposition of three types of electrical equipment under the same household user, which is 3% higher than that of the other benchmark models on average. In the cross-household test, the PMAM also demonstrated a better decomposition ability, with the F1 score maintained above 0.85, and the mean absolute error (MAE) decreased by 5.3% on average compared with that of the UNPMAM. [ABSTRACT FROM AUTHOR]

The identification of wetland vegetation is essential for environmental protection and management as well as for monitoring wetlands' health and assessing ecosystem services. However, some limitations on vegetation classification may be related to remote sensing technology, confusion between plant species, and challenges related to inadequate data accuracy. In this paper, vegetation classification in the Yancheng Coastal Wetlands is studied and evaluated from Sentinel-2 images based on a random forest algorithm. Based on consistent time series from remote sensing observations, the characteristic patterns of the Yancheng Coastal Wetlands were better captured. Firstly, the spectral features, vegetation indices, and phenological characteristics were extracted from remote sensing images, and classification products were obtained by constructing a dense time series using a dataset based on Sentinel-2 images in Google Earth Engine (GEE). Then, remote sensing classification products based on the random forest machine learning algorithm were obtained, with an overall accuracy of 95.64% and kappa coefficient of 0.94. Four indicators (POP, SOS, NDVIre, and B12) were the main contributors to the importance of the weight analysis for all features. Comparative experiments were conducted with different classification features. The results show that the method proposed in this paper has better classification. [ABSTRACT FROM AUTHOR]

Forecasting the generation of solar power plants (SPPs) requires taking into account meteorological parameters that influence the difference between the solar irradiance at the top of the atmosphere calculated with high accuracy and the solar irradiance at the tilted plane of the solar panel on the Earth's surface. One of the key factors is cloudiness, which can be presented not only as a percentage of the sky area covered by clouds but also many additional parameters, such as the type of clouds, the distribution of clouds across atmospheric layers, and their height. The use of machine learning algorithms to forecast the generation of solar power plants requires retrospective data over a long period and formalising the features; however, retrospective data with detailed information about cloudiness are normally recorded in the natural language format. This paper proposes an algorithm for processing such records to convert them into a binary feature vector. Experiments conducted on data from a real solar power plant showed that this algorithm increases the accuracy of short-term solar irradiance forecasts by 5–15%, depending on the quality metric used. At the same time, adding features makes the model less transparent to the user, which is a significant drawback from the point of view of explainable artificial intelligence. Therefore, the paper uses an additive explanation algorithm based on the Shapley vector to interpret the model's output. It is shown that this approach allows the machine learning model to explain why it generates a particular forecast, which will provide a greater level of trust in intelligent information systems in the power industry. [ABSTRACT FROM AUTHOR]

This paper focuses on the use of local Explainable Artificial Intelligence (XAI) methods, particularly the Local Rule-Based Explanations (LORE) technique, within healthcare and medical settings. It emphasizes the critical role of interpretability and transparency in AI systems for diagnosing diseases, predicting patient outcomes, and creating personalized treatment plans. While acknowledging the complexities and inherent trade-offs between interpretability and model performance, our work underscores the significance of local XAI methods in enhancing decision-making processes in healthcare. By providing granular, case-specific insights, local XAI methods like LORE enhance physicians' and patients' understanding of machine learning models and their outcome. Our paper reviews significant contributions to local XAI in healthcare, highlighting its potential to improve clinical decision making, ensure fairness, and comply with regulatory standards. [ABSTRACT FROM AUTHOR]

Recent research has revealed that subtle imperceptible perturbations can deceive well-trained neural network models, leading to inaccurate outcomes. These instances, known as adversarial examples, pose significant threats to the secure application of machine learning techniques in safety-critical systems. In this paper, we delve into the study of one-pixel attacks in deep neural networks, recently reported as a kind of adversarial examples. To identify such one-pixel attacks, most existing methodologies rely on the differential evolution method, which utilizes random selection from the current population to escape local optima. However, the differential evolution technique might waste search time and overlook good solutions if the number of iterations is insufficient. Hence, in this paper, we propose a gradient ascent with momentum approach to efficiently discover good solutions for the one-pixel attack problem. As our method takes a more direct route to the goal compared to existing methods relying on blind random walks, it can effectively identify one-pixel attacks. Our experiments conducted on popular CNNs demonstrate that, in comparison with existing methodologies, our technique can detect one-pixel attacks significantly faster. [ABSTRACT FROM AUTHOR]

This correction notice provides updates and corrections to a research paper on deep machine learning model-based cyber-attacks detection in smart power systems. The paper proposes a deep learning-based attack detection model that addresses system disturbances caused by natural events and cyber-attacks. It discusses the use of principal component analysis (PCA) for feature selection and the potential of deep learning-based and decision tree classifiers for detecting cyber-attacks in intelligent energy grids. The notice also includes updates to references, clarifications on the experimental data set, and feature selection based on PCA. The study evaluates the effectiveness of the proposed model using various assessment indexes and compares it to conventional methods, concluding that the proposed model is effective in detecting cyber-attacks and demonstrates good performance in detecting destructive attacks. [Extracted from the article]

Mean-field games (MFGs) are developed to model the decision-making processes of a large number of interacting agents in multi-agent systems. This paper studies mean-field games on graphs (G -MFGs). The equilibria of G -MFGs, namely, mean-field equilibria (MFE), are challenging to solve for their high-dimensional action space because each agent has to make decisions when they are at junction nodes or on edges. Furthermore, when the initial population state varies on graphs, we have to recompute MFE, which could be computationally challenging and memory-demanding. To improve the scalability and avoid repeatedly solving G -MFGs every time their initial state changes, this paper proposes physics-informed graph neural operators (PIGNO). The PIGNO utilizes a graph neural operator to generate population dynamics, given initial population distributions. To better train the neural operator, it leverages physics knowledge to propagate population state transitions on graphs. A learning algorithm is developed, and its performance is evaluated on autonomous driving games on road networks. Our results demonstrate that the PIGNO is scalable and generalizable when tested under unseen initial conditions. [ABSTRACT FROM AUTHOR]

The high cost of manual weed control and the overuse of herbicides restrict the yield and quality of soybean. Intelligent mechanical weeding and precise application of pesticides can be used as effective alternatives for weed control in the field, and these require accurate distinction between crops and weeds. In this paper, images of soybean seedlings and weeds in different growth areas are used as datasets. In the aspect of soybean recognition, this paper designs a YOLOv8nGP algorithm with a backbone network optimisation based on GhostNet and an unconstrained pruning method with a 60% pruning rate. Compared with the original YOLOv8n, the YOLOv8nGP improves the Precision (P), Recall (R), and F1 metrics by 1.1% each, reduces the model size by 3.6 mb, and the inference time was 2.2 ms, which could meet the real-time requirements of field operations. In terms of weed recognition, this study utilises an image segmentation method based on the Normalized Excess Green Index (NExG). After filtering the soybean seedlings, the green parts of the image are extracted for weed recognition, which reduces the dependence on the diversity of the weed datasets. This study combines deep learning with traditional algorithms, which provides a new solution for weed recognition of soybean seedlings. [ABSTRACT FROM AUTHOR]

Operating nuclear power plants (NPPs) generate and collect large amounts of equipment reliability (ER) element data that contain information about the status of components, assets, and systems. Some of this information is in textual form where the occurrence of abnormal events or maintenance activities are described. Analyses of NPP textual data via natural language processing (NLP) methods have expanded in the last decade, and only recently the true potential of such analyses has emerged. So far, applications of NLP methods have been mostly limited to classification and prediction in order to identify the nature of the given textual element (e.g., safety or non-safety relevant). In this paper, we target a more complex problem: the automatic generation of knowledge based on a textual element in order to assist system engineers in assessing an asset's historical health performance. The goal is to assist system engineers in the identification of anomalous behaviors, cause–effect relations between events, and their potential consequences, and to support decision-making such as the planning and scheduling of maintenance activities. "Knowledge extraction" is a very broad concept whose definition may vary depending on the application context. In our particular context, it refers to the process of examining an ER textual element to identify the systems or assets it mentions and the type of event it describes (e.g., component failure or maintenance activity). In addition, we wish to identify details such as measured quantities and temporal or cause–effect relations between events. This paper describes how ER textual data elements are first preprocessed to handle typos, acronyms, and abbreviations, then machine learning (ML) and rule-based algorithms are employed to identify physical entities (e.g., systems, assets, and components) and specific phenomena (e.g., failure or degradation). A few applications relevant from an NPP ER point of view are presented as well. [ABSTRACT FROM AUTHOR]

This paper presents a detailed review of the existing literature on peer-to-peer (P2P) energy trading considering market architectures, trading strategies, and enabling technologies. P2P energy trading enables individual users in the electricity network to act as sellers or buyers and trade energy among each other. To facilitate the discussion on different aspects of P2P energy trading, this paper focuses on P2P market mechanisms, relevant bidding strategies, and auction models. In addition, to solve the energy management problems associated with P2P energy trading, this paper investigates widely used solution methods such as game-theoretic models, mathematical optimisation, as well as more recent machine learning techniques and evaluates them in a critical manner. The outcomes of this investigation along with the identification of the challenges and limitations will allow researchers to find suitable P2P energy trading mechanisms based on different market contexts. Moreover, the discussions on potential future research directions are expected to improve the effectiveness of P2P energy trading technologies. [ABSTRACT FROM AUTHOR]

The digitization of distribution power systems has revolutionized the way data are collected and analyzed. In this paper, the critical task of harnessing this information to identify irregularities and anomalies in electricity consumption is tackled. The focus is on detecting non-technical losses (NTLs) and energy theft within distribution networks. A comprehensive overview of the methodologies employed to uncover NTLs and energy theft is presented, leveraging measurements of electricity consumption. The most common scenarios and prevalent cases of anomalies and theft among consumers are identified. Additionally, statistical indicators tailored to specific anomalies are proposed. In this research paper, the practical implementation of numerous artificial intelligence (AI) algorithms, including the artificial neural network (ANN), ANFIS, autoencoder neural network, and K-mean clustering, is highlighted. These algorithms play a central role in our research, and our primary objective is to showcase their effectiveness in identifying NTLs. Real-world data sourced directly from distribution networks are utilized. Additionally, we carefully assess how well statistical methods work and compare them to AI techniques by testing them with real data. The artificial neural network (ANN) accurately identifies various consumer types, exhibiting a frequency error of 7.62%. In contrast, the K-means algorithm shows a slightly higher frequency error of 9.26%, while the adaptive neuro-fuzzy inference system (ANFIS) fails to detect the initial anomaly type, resulting in a frequency error of 11.11%. Our research suggests that AI can make finding irregularities in electricity consumption even more effective. This approach, especially when using data from smart meters, can help us discover problems and safeguard distribution networks. [ABSTRACT FROM AUTHOR]

This paper presents a visual compass method utilizing global features, specifically spherical moments. One of the primary challenges faced by photometric methods employing global features is the variation in the image caused by the appearance and disappearance of regions within the camera's field of view as it moves. Additionally, modeling the impact of translational motion on the values of global features poses a significant challenge, as it is dependent on scene depths, particularly for non-planar scenes. To address these issues, this paper combines the utilization of image masks to mitigate abrupt changes in global feature values and the application of neural networks to tackle the modeling challenge posed by translational motion. By employing masks at various locations within the image, multiple estimations of rotation corresponding to the motion of each selected region can be obtained. Our contribution lies in offering a rapid method for implementing numerous masks on the image with real-time inference speed, rendering it suitable for embedded robot applications. Extensive experiments have been conducted on both real-world and synthetic datasets generated using Blender. The results obtained validate the accuracy, robustness, and real-time performance of the proposed method compared to a state-of-the-art method. [ABSTRACT FROM AUTHOR]

Smart buildings use advanced technologies to automate building functions. One important function is occupancy detection using Internet of Things (IoT) sensors for smart buildings. Occupancy information is useful information to reduce energy consumption by automating building functions such as lighting, heating, ventilation, and air conditioning systems. The information is useful to improve indoor air quality by ensuring that ventilation systems are used only when and where they are needed. Additionally, it is useful to enhance building security by detecting unusual or unexpected occupancy levels and triggering appropriate responses, such as alarms or alerts. Occupancy information is useful for many other applications, such as emergency response, plug load energy management, point-of-interest identification, etc. However, the accuracy of occupancy detection is limited by factors such as real-time occupancy data, sensor placement, privacy concerns, and the presence of pets or objects that can interfere with sensor reading. With the rapid development of IoT sensor technologies and the increasing need for smart building solutions, there is a growing interest in occupancy detection techniques. There is a need to provide a comprehensive survey of these technologies. Although there are some exciting survey papers, they all have limited scopes with different focuses. Therefore, this paper provides a comprehensive overview of the current state-of-the-art occupancy detection methods (including both traditional algorithms and machine learning algorithms) and devices with their advantages and limitations. It surveys and compares fundamental technologies (such as sensors, algorithms, etc.) for smart buildings. Furthermore, the survey provides insights and discussions, which can help researchers, practitioners, and stakeholders develop more effective occupancy detection solutions for smart buildings. [ABSTRACT FROM AUTHOR]

The cooperative, connected, and automated mobility (CCAM) infrastructure plays a key role in understanding and enhancing the environmental perception of autonomous vehicles (AVs) driving in complex urban settings. However, the deployment of CCAM infrastructure necessitates the efficient selection of the computational processing layer and deployment of machine learning (ML) and deep learning (DL) models to achieve greater performance of AVs in complex urban environments. In this paper, we propose a computational framework and analyze the effectiveness of a custom-trained DL model (YOLOv8) when deployed in diverse devices and settings at the vehicle-edge-cloud-layered architecture. Our main focus is to understand the interplay and relationship between the DL model's accuracy and execution time during deployment at the layered framework. Therefore, we investigate the trade-offs between accuracy and time by the deployment process of the YOLOv8 model over each layer of the computational framework. We consider the CCAM infrastructures, i.e., sensory devices, computation, and communication at each layer. The findings reveal that the performance metrics results (e.g., 0.842 mAP@0.5) of deployed DL models remain consistent regardless of the device type across any layer of the framework. However, we observe that inference times for object detection tasks tend to decrease when the DL model is subjected to different environmental conditions. For instance, the Jetson AGX (non-GPU) outperforms the Raspberry Pi (non-GPU) by reducing inference time by 72%, whereas the Jetson AGX Xavier (GPU) outperforms the Jetson AGX ARMv8 (non-GPU) by reducing inference time by 90%. A complete average time comparison analysis for the transfer time, preprocess time, and total time of devices Apple M2 Max, Intel Xeon, Tesla T4, NVIDIA A100, Tesla V100, etc., is provided in the paper. Our findings direct the researchers and practitioners to select the most appropriate device type and environment for the deployment of DL models required for production. [ABSTRACT FROM AUTHOR]

For insulated gate bipolar transistor (IGBT) modules using wire bonding as the interconnection method, the main failure mechanism is cracking of the bonded interface. Studying the mechanical properties of the bonded interface is crucial for assessing the reliability of IGBT modules. In this paper, first, shear tests are conducted on the bonded interface to test the bonded interface's strength. Then, finite element–cohesive zone modeling (FE-CZM) is established to describe the mechanical behavior of the bonded interface. A novel machine learning (ML) architecture integrating a convolutional neural network (CNN) and a long short-term memory (LSTM) network is used to identify the shape and parameters of the traction separation law (TSL) of the FE-CZM model accurately and efficiently. The CNN-LSTM architecture not only has excellent feature extraction and sequence-data-processing abilities but can also effectively address the long-term dependency problem. A total of 1800 sets of datasets are obtained based on numerical computations, and the CNN-LSTM architecture is trained with load–displacement (F–δ) curves as input parameters and TSL shapes and parameters as output parameters. The results show that the error rate of the model for TSL shape prediction is only 0.186%. The performance metric's mean absolute percentage error (MAPE) is less than 3.5044% for all the predictions of the TSL parameters. Compared with separate CNN and LSTM architectures, the proposed CNN-LSTM-architecture approach exhibits obvious advantages in recognizing TSL shapes and parameters. A combination of the FE-CZM and ML methods in this paper provides a promising and effective solution for identifying the mechanical parameters of the bonded interfaces of IGBT modules. [ABSTRACT FROM AUTHOR]

Since financial assets on stock exchanges were created, investors have sought to predict their future values. Currently, cryptocurrencies are also seen as assets. Machine learning is increasingly adopted to assist and automate investments. The main objective of this paper is to make daily predictions about the movement direction of financial time series through classification models, financial time series preprocessing methods, and feature selection with genetic algorithms. The target time series are Bitcoin, Ibovespa, and Vale. The methodology of this paper includes the following steps: collecting time series of financial assets; data preprocessing; feature selection with genetic algorithms; and the training and testing of machine learning models. The results were obtained by evaluating the models with the area under the ROC curve metric. For the best prediction models for Bitcoin, Ibovespa, and Vale, values of 0.61, 0.62, and 0.58 were obtained, respectively. In conclusion, the feature selection allowed the improvement of performance in most models, and the input series in the form of percentage variation obtained a good performance, although it was composed of fewer attributes in relation to the other sets tested. [ABSTRACT FROM AUTHOR]

In view of the ecological threat posed by cyanobacteria blooms in Taihu Lake (China), this paper presents a study on the area of cyanobacteria extent based on MODIS data using the quantum particle swarm optimization–random forest (QPSO-RF) machine learning algorithm. This paper selects multiple remote sensing input indices that can represent the characteristics of the primary underlying type in Taihu Lake. The proposed method performs best, with an F1 score of 0.91–0.98. Based on this method, the spatio-temporal variation of cyanobacteria blooms in the Taihu Lake complex was analyzed. During 2010–2022, the average area of cyanobacteria blooms in Taihu Lake increased slightly. Severe-scale cyanobacteria blooms occurred in 2015–2019. Cyanobacteria blooms were normally concentrated from May to November. However, the most prolonged extended duration occurred in 2017, lasting for eight months. Spatially, cyanobacteria blooms were mainly identified in the northwestern part of Taihu Lake, with an average occurrence frequency of about 10.0%. The cyanobacteria blooms often began to grow in the northwestern part of the lake and then spread to the Center of the Lake, and also dissipated earliest in the northwestern part of the lake. Our study is also beneficial for monitoring the growth of cyanobacteria blooms in other similar large lakes in long time series. [ABSTRACT FROM AUTHOR]

Background: An application of artificial intelligence is machine learning, which allows computer programs to learn and create data. Methods: In this work, we aimed to evaluate the performance of the MySLR machine learning platform, which implements the Latent Dirichlet Allocation (LDA) algorithm in the identification and screening of papers present in the literature that focus on mutations of the apolipoprotein E (ApoE) gene in Italian Alzheimer's Disease patients. Results: MySLR excludes duplicates and creates topics. MySLR was applied to analyze a set of 164 scientific publications. After duplicate removal, the results allowed us to identify 92 papers divided into two relevant topics characterizing the investigated research area. Topic 1 contains 70 papers, and topic 2 contains the remaining 22. Despite the current limitations, the available evidence suggests that articles containing studies on Italian Alzheimer's Disease (AD) patients were 65.22% (n = 60). Furthermore, the presence of papers about mutations, including single nucleotide polymorphisms (SNPs) ApoE gene, the primary genetic risk factor of AD, for the Italian population was 5.4% (n = 5). Conclusion: The results show that the machine learning platform helped to identify case-control studies on ApoE gene mutations, including SNPs, but not only conducted in Italy. [ABSTRACT FROM AUTHOR]

This review explores the transformative integration of artificial intelligence (AI) and healthcare through conversational AI leveraging Natural Language Processing (NLP). Focusing on Large Language Models (LLMs), this paper navigates through various sections, commencing with an overview of AI's significance in healthcare and the role of conversational AI. It delves into fundamental NLP techniques, emphasizing their facilitation of seamless healthcare conversations. Examining the evolution of LLMs within NLP frameworks, the paper discusses key models used in healthcare, exploring their advantages and implementation challenges. Practical applications in healthcare conversations, from patient-centric utilities like diagnosis and treatment suggestions to healthcare provider support systems, are detailed. Ethical and legal considerations, including patient privacy, ethical implications, and regulatory compliance, are addressed. The review concludes by spotlighting current challenges, envisaging future trends, and highlighting the transformative potential of LLMs and NLP in reshaping healthcare interactions. [ABSTRACT FROM AUTHOR]

This paper offers a comprehensive examination of the process involved in developing and automating supervised end-to-end machine learning workflows for forecasting and classification purposes. It offers a complete overview of the components (i.e., feature engineering and model selection), principles (i.e., bias–variance decomposition, model complexity, overfitting, model sensitivity to feature assumptions and scaling, and output interpretability), models (i.e., neural networks and regression models), methods (i.e., cross-validation and data augmentation), metrics (i.e., Mean Squared Error and F1-score) and tools that rule most supervised learning applications with numerical and categorical data, as well as their integration, automation, and deployment. The end goal and contribution of this paper is the education and guidance of the non-AI expert academic community regarding complete and rigorous machine learning workflows and data science practices, from problem scoping to design and state-of-the-art automation tools, including basic principles and reasoning in the choice of methods. The paper delves into the critical stages of supervised machine learning workflow development, many of which are often omitted by researchers, and covers foundational concepts essential for understanding and optimizing a functional machine learning workflow, thereby offering a holistic view of task-specific application development for applied researchers who are non-AI experts. This paper may be of significant value to academic researchers developing and prototyping machine learning workflows for their own research or as customer-tailored solutions for government and industry partners. [ABSTRACT FROM AUTHOR]