Search

Pattern recognition systems always misclassify anomalies, which can be dangerous for uninformed users. Therefore, anomalies must be filtered out from each classification. The main challenge for the anomaly filter design is the huge number of possible anomaly samples compared with the number of samples in the training set. Tailoring the filter for the given classifier is just the first step in this reduction. Paper tests the hypothesis that the filter trained in avoiding "near" anomalies will also refuse the "far" anomalies, and the anomaly detector is then just a classifier distinguishing between "far real" and "near anomaly" samples. As a "far real" samples generator was used, a Generative Adversarial Network (GAN) fake generator that transforms normally distributed random seeds into fakes similar to the training samples. The paper proves the assumption that seeds unused in fake training will generate anomalies. These seeds are distinguished according to their Chebyshev norms. While the fakes have seeds within the hypersphere with a given radius, the near anomalies have seeds within the sphere near cover. Experiments with various anomaly test sets have shown that GAN-based anomaly detectors create a reliable anti-anomaly shield using the abovementioned assumptions. The proposed anomaly detector is tailored to the given classifier, but its limitation is due to the need for the availability of the database on which the classifier was trained. [ABSTRACT FROM AUTHOR]

Lithium-ion batteries are widely used in electric vehicles, energy storage power stations, and many other applications. Accurate and reliable monitoring of battery health status and remaining capacity is the key to establish a lithium-ion cell management system. In this paper, based on a Bayesian optimization algorithm, a deep neural network is structured to evaluate the whole charging curve of the battery using partial charging curve data as input. A 0.74 Ah battery is used for experiments, and the effect of different input data lengths is also investigated to check the high flexibility of the approach. The consequences show that using only 20 points of partial charging data as input, the whole charging profile of a cell can be exactly predicted with a root-mean-square error (RMSE) of less than 19.16 mAh (2.59% of the nominal capacity of 0.74 Ah), and its mean absolute percentage error (MAPE) is less than 1.84%. In addition, critical information including battery state-of-charge (SOC) and state-of-health (SOH) can be extracted in this way to provide a basis for safe and long-lasting battery operation. [ABSTRACT FROM AUTHOR]

Shadow removal for document images is an essential task for digitized document applications. Recent shadow removal models have been trained on pairs of shadow images and shadow-free images. However, obtaining a large, diverse dataset for document shadow removal takes time and effort. Thus, only small real datasets are available. Graphic renderers have been used to synthesize shadows to create relatively large datasets. However, the limited number of unique documents and the limited lighting environments adversely affect the network performance. This paper presents a large-scale, diverse dataset called the Synthetic Document with Diverse Shadows (SynDocDS) dataset. The SynDocDS comprises rendered images with diverse shadows augmented by a physics-based illumination model, which can be utilized to obtain a more robust and high-performance deep shadow removal network. In this paper, we further propose a Dual Shadow Fusion Network (DSFN). Unlike natural images, document images often have constant background colors requiring a high understanding of global color features for training a deep shadow removal network. The DSFN has a high global color comprehension and understanding of shadow regions and merges shadow attentions and features efficiently. We conduct experiments on three publicly available datasets, the OSR, Kligler's, and Jung's datasets, to validate our proposed method's effectiveness. In comparison to training on existing synthetic datasets, our model training on the SynDocDS dataset achieves an enhancement in the PSNR and SSIM, increasing them from 23.00 dB to 25.70 dB and 0.959 to 0.971 on average. In addition, the experiments demonstrated that our DSFN clearly outperformed other networks across multiple metrics, including the PSNR, the SSIM, and its impact on OCR performance. [ABSTRACT FROM AUTHOR]

To achieve successful prevention of fire incidents originating from human activities, it is imperative to possess a thorough understanding. This paper introduces a machine learning approach, specifically utilizing deep neural networks (DNN), to develop predictive models for fire occurrence in Keelung City, Taiwan. It investigates ten factors across demographic, architectural, and economic domains through spatial analysis and thematic maps generated from geographic information system data. These factors are then integrated as inputs for the DNN model. Through 50 iterations, performance indices including the coefficient of determination (R2), root mean square error (RMSE), variance accounted for (VAF), prediction interval (PI), mean absolute error (MAE), weighted index (WI), weighted mean absolute percentage error (WMAPE), Nash–Sutcliffe efficiency (NS), and the ratio of performance to deviation (RPD) are computed, with average values of 0.89, 7.30 × 10−2, 89.21, 1.63, 4.90 × 10−2, 0.97, 2.92 × 10−1, 0.88, and 4.84, respectively. The model's predictions, compared with historical data, demonstrate its efficacy. Additionally, this study explores the impact of various urban renewal strategies using the DNN model, highlighting the significant influence of economic factors on fire incidence. This underscores the importance of economic factors in mitigating fire incidents and emphasizes their consideration in urban renewal planning. [ABSTRACT FROM AUTHOR]

Deep neural networks excel in supervised learning tasks but are constrained by the need for extensive labeled data. Self-supervised learning emerges as a promising alternative, allowing models to learn without explicit labels. Information theory has shaped deep neural networks, particularly the information bottleneck principle. This principle optimizes the trade-off between compression and preserving relevant information, providing a foundation for efficient network design in supervised contexts. However, its precise role and adaptation in self-supervised learning remain unclear. In this work, we scrutinize various self-supervised learning approaches from an information-theoretic perspective, introducing a unified framework that encapsulates the self-supervised information-theoretic learning problem. This framework includes multiple encoders and decoders, suggesting that all existing work on self-supervised learning can be seen as specific instances. We aim to unify these approaches to understand their underlying principles better and address the main challenge: many works present different frameworks with differing theories that may seem contradictory. By weaving existing research into a cohesive narrative, we delve into contemporary self-supervised methodologies, spotlight potential research areas, and highlight inherent challenges. Moreover, we discuss how to estimate information-theoretic quantities and their associated empirical problems. Overall, this paper provides a comprehensive review of the intersection of information theory, self-supervised learning, and deep neural networks, aiming for a better understanding through our proposed unified approach. [ABSTRACT FROM AUTHOR]

LiDAR has high accuracy and resolution and is widely used in various fields. In particular, phase-modulated continuous-wave (PhMCW) LiDAR has merits such as low power, high precision, and no need for laser frequency modulation. However, with decreasing signal-to-noise ratio (SNR), the noise on the signal waveform becomes so severe that the current methods to extract the time-of-flight are no longer feasible. In this paper, a novel method that uses deep neural networks to measure the pulse width is proposed. The effects of distance resolution and SNR on the performance are explored. Recognition accuracy reaches 81.4% at a 0.1 m distance resolution and the SNR is as low as 2. We simulate a scene that contains a vehicle, a tree, a house, and a background located up to 6 m away. The reconstructed point cloud has good fidelity, the object contours are clear, and the features are restored. More precisely, the three distances are 4.73 cm, 6.00 cm, and 7.19 cm, respectively, showing that the performance of the proposed method is excellent. To the best of our knowledge, this is the first work that employs a neural network to directly process LiDAR signals and to extract their time-of-flight. [ABSTRACT FROM AUTHOR]

Soybean (Glycine max (L.) Merr.) is a major source of oil and protein for human food and animal feed; however, soybean crops face diverse factors causing damage, including pathogen infections, environmental shifts, poor fertilization, and incorrect pesticide use, leading to reduced yields. Identifying the level of leaf damage aids yield projections, pesticide, and fertilizer decisions. Deep learning models (DLMs) and neural networks mastering tasks from abundant data have been used for binary healthy/unhealthy leaf classification. However, no DLM predicts and categorizes soybean leaf damage severity (five levels) for tailored pesticide use and yield forecasts. This paper introduces a novel DLM for accurate damage prediction and classification, trained on 2930 near-field soybean leaf images. The model quantifies damage severity, distinguishing healthy/unhealthy leaves and offering a comprehensive solution. Performance metrics include accuracy, precision, recall, and F1-score. This research presents a robust DLM for soybean damage assessment, supporting informed agricultural decisions based on specific damage levels and enhancing crop management and productivity. [ABSTRACT FROM AUTHOR]