Search

Energy management systems allow the Smart Grids industry to track, improve, and regulate energy use. Particularly, demand-side management is regarded as a crucial component of the entire Smart Grids system. Therefore, by aligning utility offers with customer demand, anticipating future energy demands is essential for regulating consumption. An updated examination of several forecasting techniques for projecting energy short-term load forecasts is provided in this article. Each class of algorithms, including statistical techniques, Machine Learning, Deep Learning, and hybrid combinations, are comparatively evaluated and critically analyzed, based on three real consumption datasets from Spain, Germany, and the United States of America. To increase the size of tiny training datasets, this paper also proposes a data augmentation technique based on Generative Adversarial Networks. The results show that the Deep Learning-hybrid model is more accurate than traditional statistical methods and basic Machine Learning procedures. In the same direction, it is demonstrated that more comprehensive datasets assisted by complementary data, such as energy generation and weather, may significantly boost the accuracy of the models. Additionally, it is also demonstrated that Generative Adversarial Networks-based data augmentation may greatly improve algorithm accuracy. [ABSTRACT FROM AUTHOR]

The increased penetration of renewable energy sources (RESs) as an effective mechanism to reduce carbon emissions leads to an increased weather dependency for power and energy systems. This has created dynamic operation and degradation phenomena, which affect the lifetime estimation of the assets operated with RESs. For the reliable and efficient operation of RES it is crucial to monitor the health of its constituent components and feature selection is a crucial step for building robust and accurate health monitoring approaches. In this context, this paper presents a probabilistic feature selection approach, which probabilistically weights and selects features through a heuristic and iterative process for an improved asset lifetime estimation. Power transformers are key power grid assets and they are used to demonstrate the validity and impact of the proposed approach. The approach is tested on two different photovoltaic power plants operated in Spain and Australia. Results consistently show that the proposed feature-selection approach reduces the prediction error and consistently selects relevant features. The approach has been applied to transformer lifetime estimation, but it can be generally applied to assist in the lifetime estimation of other components operated in RESs. Part of the studies presented here as well as source codes are all open-source under the GitHub repository https://github.com/iramirezg/FeatureSelection. • Probabilistic feature selection approach for improved asset lifetime estimation. • Integration of environmental features for improved renewable-operated asset lifetime. • Systematic and robust feature weighting methodology. • Improved transformer lifetime estimation including sensor and environmental data. • Validated on two real photovoltaic power plant case studies. [ABSTRACT FROM AUTHOR]

In wastewater treatment plants (WWTPs), the stochastic nature of influent wastewater and operational and weather conditions cause fluctuations in effluent quality. Data-driven models can forecast effluent quality a few hours ahead as a response to the influent characteristics, providing enough time to adjust system operations and avoid undesired consequences. However, existing data for training models are often incomplete and contain missing values. On the other hand, collecting additional data by installing new sensors is costly. The trade-off between using existing incomplete data and collecting costly new data results in three data challenges faced when developing data-driven WWTP effluent forecasters. These challenges are to determine important variables to be measured, the minimum number of required data instances, and the maximum percentage of tolerable missing values that do not impede the development of an accurate model. As these issues are not discussed in previous studies, in this research, for the first time, a comprehensive analysis is done to provide answers to these challenges. Another issue that arises in all data-driven modeling is how to select an appropriate forecasting model. This paper addresses these issues by first testing nine machine learning models on data collected from three wastewater treatment plants located in Iran, Australia, and Spain. The most accurate forecaster, Bayesian network, was then used to address the articulated challenges. Key variables in forecasting effluent characteristics were flow rate, total suspended solids, electrical conductivity, phosphorus compounds, wastewater temperature, and air temperature. A minimum of 250 samples was needed during the model training to achieve a great reduction in the forecasting error. Moreover, a steep increase in the error was observed should the portion of missing values exceed 10%. The results assist plant managers in estimating the necessary data collection effort to obtain an accurate forecaster, contributing to the quality of the effluent. [Display omitted] • Bayesian network is benchmarked against eight AI models to predict wastewater quality. • Bayesian networks can handle missing value in input data due to probabilistic nature. • Key variables in WWTP quality and quantity were specified. • Input data quality has a huge role in successful development of data-driven models. • The prediction error sharply increases when the portion of missing data exceeds 10%. [ABSTRACT FROM AUTHOR]

Extreme Wind Speed events (EWS) are responsible for the worst damages caused by wind in wind farms. An accurate estimation of the frequency and intensity of EWS is essential to avoid wind turbine damage and to minimize cut-out events in these facilities. In this paper we discuss how generative Data Augmentation (DA) techniques improve the performance of Machine Learning (ML) and Deep Learning (DL) algorithms in EWS prediction problems. These problems are usually tackled as classification tasks, which are highly unbalanced due to the small number of EWS events in wind farms. Different versions of Variational AutoEncoders (VAE) are proposed and analysed in this work (VAEs, Conditional VAEs (CVAEs) and Class-Informed VAEs (CI-VAE)) as generative DA techniques to balance the data in EWS problems, leading to better performance of the prediction systems. The proposed generative DA techniques have been compared against traditional DA algorithms in a real problem of EWS prediction in Spain, considering ERA5 reanalysis data as predictive variables. The results showed that the CI-VAE with a Convolutional Neural Network approach obtained the best results, with values of Precision 0.62, Recall 0.74 and F1 score 0.67, improving up to 4% the results of the method without data augmentation techniques. [Display omitted] • Generative data augmentation techniques can improve extreme wind prediction. • Variational Autoencoders modifications are used to generate synthetic wind extreme samples. • Experiments on real wind speed data from a Spanish wind farm are presented. • Comparisons with traditional data augmentation techniques show prediction improvements. [ABSTRACT FROM AUTHOR]

[Display omitted] • Inclusion of temporal data can improve detection F 1 -Score by 8% • Infrared bands provide about 4% more F 1 -Score than visible bands despite lower resolution • Using over 80 features provides an increase of about 12% F 1 -Score over using less than 10. • The proposed method successfully detects all test plots with nearly 90% F 1 -Score • A dataset of recent manure application, verified through on-site validation, is made public. The use of manure in agricultural fields during the wet season can lead to environmental pollution by releasing nitrates into nearby water sources. To address this issue, authorities may impose closed periods during which manure application is prohibited. However, ensuring compliance with these regulations can be challenging, as it is difficult to monitor all fields in a country. To tackle this problem, a solution has been proposed that involves employing machine learning techniques in conjunction with satellite imagery to automatically identify freshly manured fields. This paper investigates the relationship and effectiveness of the Sentinel-2 satellite bands and 51 frequently utilized multispectral indices in the context of precision agriculture, by exploring different feature selection methods. The proposed method achieves nearly 90% F 1 -Score and detects all test plots of the northern Spanish region, showing its potential for large-scale use in precision agriculture and environmental monitoring. This method incorporates temporal data, resulting in an 8% improvement in the detection F 1 -Score. Despite their lower spatial resolution, infrared bands have proven to be more effective than visible bands, enhancing the F 1 -Score by 4%. Furthermore, the use of over 80 features contributes to a 12% increase in the F 1 -Score compared to using fewer than 10 features. For further research and future studies, a dataset of recently manured plots, verified on-site, has been developed and made publicly available. [ABSTRACT FROM AUTHOR]