Search

Measuring sub-3nm particles outside of controlled laboratory conditions is a challenging task, as many of the instruments are operated at their limits and are subjected to changing ambient conditions. In this study, we advance the current understanding on the operation of Airmodus A11 nano Condensation Nucleus Counter (nCNC), which consists of a A10 Particle Size Magnifier (PSM) and A20 condensation particle counter (CPC). We explore the effect of the inlet line pressure on the measured particle concentration. We identify two different regions inside the instrument where supersaturation of working fluid can take place. We show the possibility of varying the cut-off of the instrument from 1 to 6 nm, a wider size range than the one usually covered by the PSM. We also present a new inlet system, which allows automated measurements of the background, minimizes the diffusion losses in the sampling line and is equipped with an electrostatic filter to remove ions. Finally, our view of the guidelines for optimal use of the Airmodus nCNC are provided. [ABSTRACT FROM AUTHOR]

This paper presents a novel multiple-input and multiple-output current-mode universal analog filter with electronic tuning capability. The proposed circuit uses a single second-generation current-controlled current conveyor with extra-X terminals (EX-CCCII) and two grounded capacitors. The filter can offer five standard filtering functions, namely low-pass, high-pass, band-pass, band-stop, all-pass responses, in the same circuit without changing the internal configuration of the filter by selecting appropriate input and output signals. To obtain the five standard filtering functions, inverted input signal and input matching conditions are absent. The natural frequency of all filter responses can be electronically controlled. The proposed circuit was simulated by SPICE using 0.18 μm CMOS process from Taiwan Semiconductor Manufacturing Company (TSMC). The results of experiments using the integrated circuit operational amplifier AD844 confirm the functionality of the new filter. [ABSTRACT FROM AUTHOR]

This paper introduces a new simple moment-generating function (MGF) design modelling method to conclude an optimum filter to maximize the Q-factor and increase the link communication span. This approach mitigates the pulse temporal dispersion, particularly the underwater wireless optical communication (UWOC) systems. Hence, some form of equalizing filter design is highly desirable. The model solution environment includes a Double Gamma Function (DGF) water channel impulse response, intersymbol interference (ISI), stochastic Poisson process, and additive Gaussian thermal noise (AGTN). The optimal filters exhibit temporal profiles comparable to those derived by published works based on complex Chernoff Bound (CB) and Modified Chernoff Bound (MCB) methods. The results show the impact of the optimum filter at a signal level and optical receiver level utilizing Eye-Diagrams and BER vs. Q-Factor, respectively. The computation involves four different UWOC propagation channel models for Coastal and Harbor waters. One of the main conclusions indicates that the optimum filter manages the temporal dispersion due to the ISI impairment correctly. Also, the proposed optimum filter reduces eye-opening and the corresponding Q-Factor by less than 15% for a five-times increase in pulse width for the same transmitted optical power level. [ABSTRACT FROM AUTHOR]

In the last 10 or 15 years, exciting new developments have occurred in the field of filters and multiplexers. The two words that best explain this phenomenon are “topology” and “technology.” Thus, this paper will cover new connections, new materials, and new processes. This paper summarizes what is new, describes the new devices, and avoids simply surveying the entire field. It is not possible to cover everything, and regrettably, some new and possibly exciting areas are omitted (such as filters fabricated using liquid crystal polymers, active element inclusion, extreme power devices used in accelerators), and others,\ldots, because something has to be left for the next paper! The paper does cover bandstop filters, intrinsically switched film bulk acoustic resonator, and barium–strontium–titanate filters, brand new derivations of lossy filter synthesis and dual-band filter synthesis, multimode networks, new work on optimal multiplexer (multiport network) configurations, and substrate integrated waveguide filters. In each of these areas significant new work has been recently performed and is presented in a summary format suitable for those thinking that the area of filters and multiplexers has become mature (stagnant) with nothing interesting to learn. Nothing could be further from the truth! [ABSTRACT FROM PUBLISHER]

This paper presents the design and application of a boost converter operated in continuous conduction mode for 15 W, with a 25 kHz switching frequency using an inductor-capacitor-inductor (LCL), pi, inductor capacitor (LC) with damping, and LC electromagnetic interference filters. Also, modeling and analysis of the boost converter in terms of state space and small signal are given. Furthermore, the effect of each filter on differential mode (DM) noise and control characteristics is presented using root locus and bode diagrams, which are not detailed in the literature for the boost converter. All results obtained from applications and simulations are compared. Moreover, frequency spectrums are given to compare DM noises. As a result, from a control point of view, the LCL filter provides better results, and for reducing DM noise, the LC and pi filters are superior to others. Besides, the LCL filter reduces the inductor value by 30% compared to other filters. [ABSTRACT FROM AUTHOR]

The papers in this special section provide deep insights into new solutions, synthesis and design techniques, topologies, and technological realizations of filters and multiplexers that can answer all existing demands from high-frequency communication systems. [ABSTRACT FROM PUBLISHER]

This paper proposes a new type of hybrid eighth‐mode substrate integrated waveguide (EMSIW) and microstrip line (MSL) bandpass filter (BPF) with mixed electric and magnetic coupling. Firstly, two second‐order EMSIW BPFs with mixed coupling and wide stopband performance are investigated. Then, in order to realise high‐order BPF with decent performance, half‐wavelength (λ/2) open‐circuited MSL resonators are employed in the hybrid BPFs design. In the end, two third‐order BPFs and a fourth‐order BPF are developed by combining the EMSIW and MSL resonators together. Extra transmission zeros can be introduced due to the cross couplings in the trisection and quadruplet topologies. For demonstration, the proposed prototypes are designed, fabricated and measured. Reasonable agreements can be achieved between the measurement and simulation. The proposed third‐order BPFs compete against the state of the art, exhibiting the competitive characteristics of the operating bandwidth, physical footprint and upper‐stopband rejection with less order. The proposed fourth‐order BPF features a compact size of 0.34 × 0.34λ0, a low insertion loss of 1 dB, a broad 3‐dB fractional bandwidth of 22.9% and an excellent lower‐stopband suppression. [ABSTRACT FROM AUTHOR]

To avoid damaging the motor and its surrounding equipment, detecting Inter-Turn Short Circuit (ITSC) faults in Permanent Magnet Synchronous Motors (PMSMs) applied in electric vehicles is a crucial task. In this paper, the detection of ITSC faults in stator winding for PMSMs is carried out by means of the Extended KALMAN Filter (EKF) algorithm combined with the Fuzzy Logic Estimator (FLE). To estimate the motor parameters, including the rotor position and speed, the EKF algorithm uses the measured stator currents and voltages beside the stator resistance, which is calculated in advance using fuzzy logic and fed to the EKF. The change behaviors of the estimated parameters were then used to detect short circuit faults in the PMSM. Using Matlab/Simulink, the proposed FL-EKF algorithm was implemented and tested on a faulty PMSM controlled by Field Oriented Control (FOC). The observation of a perfect estimation of the stator resistance through the simulation helps to precisely detect the failure, and that demonstrates the sensitivity and robustness of the proposed approach. [ABSTRACT FROM AUTHOR]

A phase-locked loop or phase lock loop (PLL) is, essentially, a closed loop control system, where its output signal (regulated) maintains a direct (chosen) relationship to the input signal (unregulated). If the phases of the input and output signals remain the same, their frequencies will also match. In its usual way, a PLL is an electronic circuit with filters and controllers that must be tuned each time, according to the input signal parameters. As a contribution and novelty, this paper introduces a new, easy, fast and highly efficient PLL algorithm, that it does not need to adjust every time the input signal changes. This makes it independent of the input signal it receives and, therefore, and in a certain way, universally applicable. In addition, the proposal is implemented exclusively by software, housed in a microcontroller, which also represents another novelty. As another remarkable feature, the proposed algorithm is very simple, with a very low computational cost, which makes it very stable, practically insensitive to noise, and very fast. These characteristics and the performance shown over a wide range of input signal frequencies, make the proposed algorithm suitable for use in different applications, from the electricity grid synchronization to the demodulation of frequency modulation, DC motor drives, etc. In addition to frequency and phase tracking, the developed algorithm generates the signal corresponding to the fundamental frequency of the input signal. Furthermore, the algorithm behavior is not affected by the input signal distortion and is independent of its initial phase. The performance and excellent behavior of the developed algorithm are evaluated through simulations and experimental tests. [ABSTRACT FROM AUTHOR]

Harmonic resonance has become an important concern for the application of shunt capacitors in recent years. A potential solution to address this challenge is to convert a shunt capacitor into a passive filter. This paper presents design methods to configure a shunt capacitor as a C-type filter or a third-order high-pass filter with guaranteed resonance-free performance. The concept of resonance-free condition is first introduced in this paper. It is then used to develop filter design methods that always meet the resonance-free condition. The two filter configurations are also compared. It was found that the third-order high-pass filter has more advantages than the C-type filter. Another useful finding of this work is that the filter parameters, as determined using the proposed design methods, are independent of the system conditions. As a result, a lookup table for the filter parameters has been created to facilitate immediate use by the industry. [ABSTRACT FROM PUBLISHER]

This paper presents a design methodology that significantly increases the peak power handling capability (PPHC) of microstrip filters. The PPHC is limited in microstrip technology by the corona effect: a physical phenomenon caused by the ionization of the air in the presence of strong electric fields around the planar circuit. Microstrip filter with low electric field strength in the air increases the corona threshold level, resulting in high PPHC. Conventional stepped impedance (SI) filters, which consist of cascaded step-shaped elements, exhibit sharp discontinuities. These geometric edges amplify the electric field strength in the air, consequently reducing the corona threshold. Our research group has recently reported a new synthesis technique that introduces a smooth-profile (SP) conductor strip. This SP strip eliminates any sharp discontinuities and significantly reduces the strength of the electric field. This paper focuses on the examination of the high power performance of 7th-order SP and SI low-pass filters. The cut-off frequency (fc) for both types of filters is set at 447.45 MHz, while the frequency for maximum stop-band rejection (fo) is 1 GHz. The findings indicate that the SP filter shows a notable enhancement in peak power handling capability (PPHC), with gains of 2.48 dB and 4.80 dB observed at critical pressure and ambient pressure, respectively. [ABSTRACT FROM AUTHOR]

This paper presents the analysis of possible transient overvoltages that can be generated during vacuum circuit-breaker (VCB) operation at the connection point of a photovoltaic powerplant. A typical switching event that is related to the VCB concerns energization and de-energization of the unloaded transformer. However, at the typical photovoltaic powerplant, the transformer is fed by an inverter equipped with LC (or LCL) filters that are necessary for limitation of harmonics and ripple in voltage and current. From the point of view of switching operations, the inductance and capacitance of the low-voltage (LV)-side connected filter affect the natural frequency of the transformer, which is reflected by different transient system response during VCB operation. In this paper, laboratory measurement of overvoltages generated during distribution transformer switching by means of VCBs is analyzed. The impact of the LC filter connected at the LV side on the overvoltages suppression was studied. Electromagnetic Transients Program–Alternative Transients Program simulations were conducted in order to verify the possibility of transients elimination by means of the additional series-connected RL choke at the transformer medium-voltage side. [ABSTRACT FROM PUBLISHER]

In cognitive communications, it is very important to be able to use data in different standards with a single receiver for reducing the cost. In order to achieve this, the application of shadow filters in cognitive communications provides an advantage in terms of having both a wide frequency range and an easy reconfiguration. In this paper, new MOSFET-C shadow filters based on the Fully Differential Second-Generation Current Conveyor (FDCCII) are proposed for cognitive communications. To facilitate electronic tuning of the filter parameters, MOSFET-C-based implementation is used. Fully differential applications increase the dynamic range of analog blocks. Also, fully differential implementations with MOSFET-C filters are useful in analog signal processing. The presented filters have the least number of components and no additional summing circuit. This study presents new FDCCII-based MOSFET-C shadow filters for cognitive communications design that provide HP, LP and BP transfer functions at the same time. In this study, two MOSFET-C shadow filters based on FDCCII are designed for single gain and double gain. The presented filters offer circuit simplicity compared to past shadow filter designs. The features of these new shadow filters are explained. Simulation results are presented to confirm the theoretical analysis. [ABSTRACT FROM AUTHOR]

This paper presents a simplified control technique for a dual three-phase topology of a unified power quality conditioner—iUPQC. The iUPQC is composed of two active filters, a series active filter and a shunt active filter (parallel active filter), used to eliminate harmonics and unbalances. Different from a conventional UPQC, the iUPQC has the series filter controlled as a sinusoidal current source and the shunt filter controlled as a sinusoidal voltage source. Therefore, the pulse width modulation (PWM) controls of the iUPQC deal with a well-known frequency spectrum, since it is controlled using voltage and current sinusoidal references, different from the conventional UPQC that is controlled using nonsinusoidal references. In this paper, the proposed design control, power flow analysis, and experimental results of the developed prototype are presented. [ABSTRACT FROM PUBLISHER]

In this paper, a novel terminated coupled line structure (TCLS) is introduced, which is constructed by a coupled line section and four terminations loaded on it. Introducing different kinds of terminations, three types of bandpass filters (BPFs) based on TCLSs are proposed, theoretically analyzed, and fabricated, including two single-ended wideband BPFs with fractional bandwidths (FBWs) of 67% and 40% respectively, and a wideband differential BPF with 74% differential-mode FBW. These BPFs can achieve wide passband bandwidth, low in-band insertion loss, high passband selectivity, as well as deep stopband rejection performance simultaneously, benefited from the multiple transmission zeros and transmission poles obtained by the TCLSs. The practical design procedures of these BPFs are presented and explained. The agreement among theoretical predictions, EM-simulated, and measured results validates our proposed filter structures. Finally, the generalized multistage filter topology based on TCLSs is proposed to design high-order filters with better filtering performances. [ABSTRACT FROM PUBLISHER]

With the development of photovoltaic power generation technology, a large number of micro-power grid with distributed generation system have appeared in remote areas. It has the longer transmission line between the traditional power grid and the inverter of the distributed generation system. This caused the equivalent network impedance would be increased and would weak the power-grid characteristics. When the photovoltaic inverter is connected to a weaker power grid, the bandwidth of the control system of the inverter will be reduced. Using the traditional PR control to solve the problem is not ideal. This paper proposes fuzzy quasi-PRD control to improve the current quality. The inverter with the LCL filter has the peak of the resonance oscillation, it will affect the stability of the system. The paper adopts the adjustable virtual damping to suppress resonance. At last, the idea is verified by MATLAB/Simulink. The results show that the fuzzy quasi-PRD control method has better control performance, and dynamic tracking characteristics. [ABSTRACT FROM AUTHOR]

The converter is the main component of the converter station and the main noise source of the PLC interference. The accurate modelling of the high-frequency characteristics of the converter is the foundation for the design of the ± 1100 kV UHVDC PLC filter. Based on deep analysis of the high-frequency characteristics of the converter valve, this paper first proposes three high-frequency models of the converter valve. Compared with a real converter valve used in similar HVDC project, model two is chosen to analyse the high-frequency characteristics. Second, the model of Zhundong–Wannan UHVDC transmission project is established in the PSCAD simulation platform to determine the actual high-frequency characteristics of the converter valve. The voltage before the smoothing reactor is calculated, and the high-frequency noise level is obtained by Fourier transform. Considering the practical application of the high-frequency model of the converter valve, this paper finally proposes a formula to express the measured noise level. The noise source expressed by the formula is more practical for research on high-frequency characteristics of the converter station. [ABSTRACT FROM AUTHOR]

The influence of a filter inductor on the steady-state performance of a parallel-type resonant converter is elaborated and analyzed in this paper. By steady-state operation analysis, it is shown that the ripple current of the filter inductor results in an inaccurate prediction of fundamental harmonic approximation (FHA), and such problem would become serious when the filter inductance is small. In order to portray such feature, an improved fundamental harmonic approximation (IFHA) is proposed. Unlike an FHA equivalent circuit, an equivalent inductor is added to the ac resistance parallelly in an IFHA equivalent circuit. Due to that, the equivalent inductor branch takes account of the ripple current of the filter inductor, and the IFHA is expected to own higher accuracy and can be used in a parameter design procedure. In this paper, the equivalent inductor expressions of full-bridge rectifier and current-doubler rectifier are derived as examples. In order to verify the theoretical analysis, a 500 W LCC resonant converter is built as a prototype. The close-loop experiment results show that small filter inductance would lead to the failure of output voltage regulation and hard-switching operation of power switches. And open-loop experiment results show the IFHA gives more accurate predictions than those of FHA. [ABSTRACT FROM AUTHOR]

Many research works report the use of LCL filters for grid-interfaced PV systems. Indiscreet selection of passive LCL filter parameters may result in poor filtering and increased power losses. LCL filter parameter selection is critical to get a good performance and at the same time ensure that losses and costs stay low. This paper proposes a novel approach to design the LCL filter for a grid-interfaced PV system. A cost-based minimization approach on a cost per joule basis for each of the filter elements is explored to obtain the optimal filter design. Simulation results for a 10-kVA grid-connected inverter with an LCL filter are presented in order to verify the efficacy of the proposed design. The impact of designed filter parameters on the ripple current is also discussed in this paper. The total inductance of the LCL filter is varied and filter parameter values which give lowest cost is identified while meeting harmonic standard requirements and the fundamental voltage drop across the filter. Finally, the proposed design is also experimentally validated via a hardware prototype. Results validate the design method in terms of the harmonic attenuation and total harmonic distortion. [ABSTRACT FROM AUTHOR]

In this paper, the active differential-mode (DM) electromagnetic interference (EMI) filter topology for ac/dc converters is first briefly investigated. The active DM EMI filter model was developed based on the models of filter components including a current transformer, a high-pass filter, an operational amplifier, and a class AB amplifier. The system model including the active filter, ac/dc converter, and line impedance stabilization networks (LISNs) are explored. With the developed system model, the loop gain and insertion gain of the active filter are derived. Based on the loop gain, the stability of the active filter is investigated and the compensation is applied to achieve stability and good EMI reduction. Both simulations and experiments are conducted to validate the developed technique. [ABSTRACT FROM AUTHOR]

There are many different methodologies for a line startup, process transfer, line conversion, and process upgrade in semiconductor IC manufacturing. In our startup of a 200 mm bulk acoustic wave filter line converted from an existing 150 mm production line, a methodology of copy, scale, develop, and match (CSDM) was introduced. This methodology includes four phases of matching (unit qualification, short flow verification, pathfinder validation, and qualification lot process) between 150 mm and 200 mm process, different failure mode effects analysis (DFMEA) for the risk assessment of the differences between two processes, process flow breakdown with process blocks and sub-blocks, a decide, define, determine, and design method of process evaluation with short loop flow process monitors based on DFMEA assessment. Following this CSDM methodology throughout the conversion process ensures that both electrical and reliability performances of 200 mm product wafers match to those of the 150 mm line. The first 200 mm full flow pathfinder lot with electrical yield on parity to 150 mm line yield. In this paper, the application of this CSDM methodology is discussed in detail. [ABSTRACT FROM AUTHOR]

In this paper, a new class of compact Chebyshev differential-mode (DM) bandpass filters with intrinsic common-mode (CM) rejection is proposed and demonstrated on $\lambda$ /4 coplanar stripline (CPS) resonators with an improved unloaded quality factor ($Q_{u}$). The distinct advantage of the proposed $\lambda$ /4 CPS resonator with higher $Q_{u}$ than slotline resonator, together with intrinsic CM rejection of CPS line, can demonstrate that $\lambda$ /4 CPS resonator is more suitable for the design of narrowband DM filter than others on slotline resonator. Then, the underlying physics why CPS resonator possesses higher $Q_{u}$ than slotline resonator is numerically studied and further interpreted by the radiation loss. To facilitate the design process, an analytical design approach is introduced by using alternative J/K inverters and a tailored method is used to extract J/K inverter values with their associated effective electrical lengths based on their equivalent circuit models. Finally, two design examples, a second-order and a fourth-order DM Chebyshev bandpass filter, are designed and implemented, operating at the center frequency of 1.8 GHz with the fractional bandwidths of 6% and 19%, respectively. The simulated and measured DM/CM frequency responses match well with each other. The proposed DM filters based on $\lambda$ /4 CPS resonators have demonstrated the claimed superior performances in terms of intrinsic CM rejection, improved unloaded quality factor, easy implementation of J/K inverter, inherent suppression of first DM harmonic, and compact size. [ABSTRACT FROM AUTHOR]

First-order allpass filters are analog filters with a unit magnitude response, but they change the phase shift between input and output signals at various frequencies. This paper presents the transadmittance-mode first-order allpass filters based on the modified current-controlled current differencing transconductance amplifier (M-CCCDTA). The proposed filters utilize a single M-CCCDTA and a grounded capacitor with no external resistors, making them well suited for implementation in an integrated circuit. The gain and phase response of the proposed filters can be adjusted electronically and separately. Also, the high output impedance of the proposed filters at both the input voltage node and the output current node makes cascading easy without the need for buffer devices. A quadrature sinusoidal oscillator based on the proposed first-order allpass filter has been designed as an example of an application. The PSpice simulation and actual experiments are utilized to validate the functionality of the proposed filters. The simulation and experimental results are consistent with the idea of anticipation. [ABSTRACT FROM AUTHOR]

In this paper, we report the development of a unified inductively coupled plasma atomic emission spectrometry technique that allows one to assess the purity of T 000 metallic tellurium. The process comprises two sequential steps: hydrometallurgical processing of electric filter dust concentrate, based on a classic hydrometallurgical scheme of processing anode slime from copper production, and electrolytic tellurium extraction followed by reducing–refining melting for the preparation of metallic tellurium. For high-speed analytical monitoring of the preparation of T 000 tellurium, we have developed an atomic emission spectrometry technique; chosen analytical lines, the inductively coupled plasma power, and an optimal-compromise matrix component concentration; and evaluated the adequacy of the proposed technique. No high-speed versatile techniques for chemical analysis of metallic tellurium, intermediate products differing in purity, or raw materials have been previously reported in the literature. The proposed technique allows one to determine up to 61 analytes with limits of detection (LODs) in the range from n × 10–7 to n × 10–4 wt % and intralaboratory precision better than 25%. Information about analyte concentrations obtained using the proposed technique allows one to optimize technologically important process parameters, draw conclusions regarding the quality of raw materials, and infer whether the final product—metallic tellurium—corresponds to grade T 000. The data we present on the chemical composition of the final product, intermediate products, and raw materials clearly demonstrate effectiveness of each step in the proposed scheme for the preparation of pure tellurium. [ABSTRACT FROM AUTHOR]

The output voltage of power electronic converters is a very important quantity for dynamic control of power electronic systems. In electrical drives without electromechanical position or speed sensor, the terminal reference voltage is used to obtain the rotor position. Dead-time effects and semiconductor voltage drop lead to distortion in the actual output voltage and degrade the control performance when the back electromotive force magnitude is low. Thus, for stable low-speed operation, output voltage sensing becomes necessary. Due to the switching nature of power electronic systems, this is not a trivial task, especially when instantaneous measurement of the terminal voltage is required. In this paper, an instantaneous switching-period average voltage sensing technique is proposed that utilizes a combined approach of oversampling and filtering. Based on the theoretical analysis of the sampling- and filter-induced measurement distortion, a general solution for an optimal filter design is derived. The additional sensing circuit is integrated into the low-side gate driver of the converter outputs. This paper includes details about the hardware implementation and extensive verification measurements. [ABSTRACT FROM AUTHOR]

This paper proposes a new filter design method that can smooth the wind power generation output while keeping the energy capacity and power rating of the energy storage system (ESS) small. Wind power generation causes frequency fluctuations in power systems. Therefore, in many cases, the ESS is needed for smoothing the fluctuations of wind generator output. In order to improve the performance of the ESS controlled with the conventional low-pass filter (LPF), this paper investigates other types of filters. First, the relations between filter and energy capacity/power rating of the ESS are disclosed through the worst-case study. Then, the frequency fluctuation analysis of the power system with respect to the wind power generation is carried out in order to realize a pin-point smoothing. Finally, a metaheuristic optimization method is proposed for the multiobjective design of the filter based on these relations so as to achieve an optimal tradeoff between the output smoothing and energy capacity/power rating of the ESS. It is shown via simulation analysis with real wind data that the proposed method can suppress the frequency fluctuation of the power system effectively with the ESS having smaller energy capacity and power rating. [ABSTRACT FROM PUBLISHER]

This paper presents an accurate method for synthesis of true time delay (TTD) reflecting elements to design wideband reflectarray (RA) antennas. In doing so, primarily the conventional phase distribution formulation of RA is modified to accommodate the design of resonant reflecting elements based on TTD technique. An accurate circuit model is then presented to realize the linear reflection coefficient phase of the reflecting elements of the RA antenna using the continued fraction theory. Finally, the equivalent circuit models of reflecting elements are implemented via multilayer frequency selective-surface structures. The RA antenna is designed and fabricated to operate in the X-band frequency. Stable aperture phase efficiency of about 80% and stable radiation patterns throughout the operating frequency band, confirm the accuracy of the proposed method. [ABSTRACT FROM PUBLISHER]

The goal of the paper was to shorten the calculation time by realising all used signal processing algorithms in the form of stack filters. The architecture of these filters allows us to process signals using the advantages of hardware processing and simultaneous signal processing. This paper elaborated on the synthesis of stack filters which realise median, averaging, opening and closing operations. The novel achievement was to develop the binary box method which allows us to obtain stack filters for more complex algorithms. This method consists of two stages and requires that we construct a spatial structure of the data. This structure allows us to examine the stacking property in two steps. Obtained in this way architecture of the function is predisposed to VLSI implementation. The authors devised this method transforming the averaging filter into stack filter; however, the invented binary box method allows us to synthesise stack filter which realises more complex signal processing algorithms. The only assumption which limits the class of acceptable algorithms is the fact that the algorithm has to satisfy the stacking property at each stage of the signal processing. The proposed approach allows us to convert well-known signal processing algorithms into realisation which guarantees significantly greater speeds of signal processing. [ABSTRACT FROM AUTHOR]

Wide bandgap semiconductor switches have been increasingly utilized to improve the power density and efficiency of power converters, as such devices are able to operate at very high frequencies, e.g., up to 100 MHz, with reduced power losses. However, such a high-frequency operation may impose a challenge to the digital control system, and the system clock frequency should be up to 100 GHz in high-precision applications, which is difficult to realize in low-cost microprocessors. Instead of using extremely high-frequency clocks, preprocessing-based solutions that utilize digital pulse-width-modulated (DPWM) dither techniques can also enhance the DPWM resolution with moderate frequency clocks. Unfortunately, this is usually achieved at the expense of introducing low-frequency harmonics, which may complicate system controller and output filter design. In this paper, an optimal dither technique is proposed to enhance the resolution of DPWM power converters. The concepts of positive dither and negative dither are first proposed in this paper. Furthermore, vector-diagram-based analysis indicates that with proper utilization of positive dithers and negative dithers and carefully selected dither sequences, the lowest order harmonic introduced by the conventional dither technique can be completely eliminated when the dither period is multiples of six switching periods. In other cases, the proposed optimal dither technique can produce minimized lowest order harmonic. Finally, experimental results obtained from a Gallium Nitride (GaN) devices-based synchronous buck converter validate the feasibility of the proposed dither technique. [ABSTRACT FROM PUBLISHER]

Tunable matching networks (MNs) are essential components for agile radio frequency systems. To optimally design such networks, the total area they cover on the Smith chart needs to be determined. In this paper, the coverage areas of typical MNs have been determined analytically for the first time. It has been found that the coverage area is encompassed by up to five arcs. Analytical expressions for the centers and radii for these arcs have been derived. The theoretical analysis is provided for four typical MNs and verified by circuit simulation and measured data. Moreover, a dynamically load-modulated power amplifier has been designed using the presented theoretical techniques, which demonstrates a measured improvement in the power added efficiency of up to 5% in the frequency range of (0.8–0.9) GHz. [ABSTRACT FROM AUTHOR]

Compared with the conventional central shunt active power filter (SAPF), modular designed SAPF can track the harmonics more precisely and quickly with a compact and expandable structure, which makes it a better solution for harmonic mitigation. But there are very few paper discussed about the modeling and parallel resonance issues of modular SAPF parallel system. This paper provides a modeling of three-level SAPF, aiming to guide the modular design and research the parallel resonance control method. First, a simplified modular three-level SAPF modeling is proposed based on averaging impedance modeling and small signal linearization techniques. Then, the coupling issues between modules are researched, and a self-adaptive active damping method is proposed to suppress the system resonance. Based on the modeling results, an improved three-level SAPF module topology is proposed to construct the modular system. The theoretical analysis and experimental results verify that the module topology improvement together with the damping strategy can promise the compensating bandwidth, reliability, and fast, precise harmonics tracking ability. [ABSTRACT FROM PUBLISHER]

Copyright of Nuclear Technology & Radiation Protection is the property of Vinca Institute of Nuclear Sciences and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Unintentional series and/or parallel resonances, due to the tuned passive filter and the line inductance, may result in severe harmonic distortion in the industrial power system. This paper presents a hybrid active filter to suppress harmonic resonance and to reduce harmonic distortion. The proposed hybrid filter is operated as variable harmonic conductance according to the voltage total harmonic distortion; therefore, harmonic distortion can be reduced to an acceptable level in response to load change or parameter variation of the power system. Since the hybrid filter is composed of a seventh-tuned passive filter and an active filter in series connection, both dc voltage and kVA rating of the active filter are dramatically decreased compared with the pure shunt active filter. In real application, this feature is very attractive since the active power filter with fully power electronics is very expensive. A reasonable tradeoff between filtering performances and cost is to use the hybrid active filter. Design consideration are presented, and experimental results are provided to validate effectiveness of the proposed method. Furthermore, this paper discusses filtering performances on line impedance, line resistance, voltage unbalance, and capacitive filters. [ABSTRACT FROM PUBLISHER]

This paper presents a new form of reconfigurable band notch resonator with a wide tuning range. The whole structure consists of a through line and two parallel coupled resonators. This paper presents an accurate lumped element equivalent circuit for the parallel coupled resonator. The mechanism giving rise to the wide tuning range is also investigated. The first harmonic of the fundamental stop-band is analyzed and compared with that of the varactor-coupled resonator. Measurement results show that the stop-band of the filter can be tuned from 0.6 to 4.0 GHz. This is achieved by varying the capacitance of two pairs of varactor diodes. The stop-band tuning range is restricted by the capacitance variation which can be achieved using the varactor diode. The potential tuning range of a filter based on this resonator is greater than one decade. [ABSTRACT FROM PUBLISHER]

Compared with the L filter, the LCL filter is more suitable for high-power low-switching-frequency applications due to its better attenuation characteristics on high frequencies. However, the parameter design for the LCL filter is more complex since both the inhibiting effect of the high-frequency harmonic current and the influence to the controller response performance of the converter should be considered. In this paper, the model of the LCL filter and the design criteria of the LCL filter for a shunt active power filter (SAPF) are analyzed in the beginning. Then, the impacts of all parameters of the LCL filter on SAPF are intuitively drawn on a graph by theoretical derivation. Finally, a novel parameter design and optimization method for the LCL filter is proposed. The validity and effectiveness of the proposed method are proved by simulated and experimental results of a single-phase SAPF prototype at the end of this paper. [ABSTRACT FROM PUBLISHER]

Based on convoluted interwoven element, a miniaturized frequency selective surface (FSS) with stable band-stop response is proposed in the paper. By extending the four dipoles into the adjacent elements, the equivalent inductance and capacitance are increased and therefore the proposed FSS realizes promising miniaturization characteristics. The simulation results indicate that the resonant frequency is 1.19GHz and the dimension is only 0.027λ0. Compared to traditional crossed elements, the size is reduced by 94.6%. Besides, the FSS has excellent angle-stability under both TE and TM waves. Finally, the proposed FSS is fabricated and measured and the experiment results prove the satisfactory consistency with the simulation results. [ABSTRACT FROM AUTHOR]

A novel normalized subband adaptive filter algorithm with combined step size is proposed for acoustic echo cancellation, which is derived by utilizing a variable mixing parameter to combine a large step size and a small one, thus providing fast convergence rate and small steady-state error. The mixing parameter is indirectly updated by utilizing the stochastic gradient method which minimizes the sum of squared subband errors. Simulation results demonstrate the superiority of the proposed algorithm in terms of the convergence rate and steady-state error as compared to other algorithms mentioned in this paper. [ABSTRACT FROM AUTHOR]

In conventional HVDC systems where the harmonic filters and shunt capacitors are installed at the ac grid side, the converter transformers inevitably suffer the detrimental impacts caused by harmonic penetration. In this paper, combined with an inductive filtering method, a parallel delta-connected filtering-winding scheme for 12-pulse converter transformer units is proposed to reduce the harmonic currents flowing through the transformers and, thus, to attenuate the harmonic effects on them. This paper describes the presented transformer configuration in terms of the wiring scheme of the 12-pulse converter transformer unit and corresponding flowing paths of different harmonic currents with the orders of 3,6n\pm 1\left(\mathrmn=1,3,5,\ldots \right), 11 and 13 in the filtering winding circuit. Then, the mechanism of the proposed scheme on harmonic suppression to the converter transformers is explained theoretically. In an attempt to validate the theoretical analysis, simulations based on PSCAD/EMTDC and experiments in a laboratory prototype system are performed to evaluate the harmonic eliminating performance of the proposed scheme. [ABSTRACT FROM PUBLISHER]

This paper proposes a novel dual-mode substrate integrated waveguide (SIW) filter technique. Based on the conventional dual-mode SIW structure, further investigation is performed. Multiple transmission zeros can be obtained at one side or both sides of the passband for an SIW cavity. Therefore, flexible design and high performance response can be available for dual-mode SIW filter. A dual-mode SIW bandpass filter with quasi-elliptic response and a dual-mode SIW diplexer with asymmetric channel response are simulated, fabricated, and measured to demonstrate and verify the novel property. [ABSTRACT FROM PUBLISHER]

Several issues related to the practical synthesis of ternary sequences with specified spectra are addressed in this paper. Specifically, sequences with harmonic multiples of two and three suppressed are studied, given their relevance when testing and characterizing nonlinear systems. In particular, the effect of nonuniform digital-to-analog converter (DAC) levels on the spectral properties of the generated signal is analyzed. It is analytically shown that the DAC nonuniform levels result in degraded harmonic suppression performance. Moreover, a new approach is proposed for designing ternary sequences, which is flexible and can be adapted to suit different requirements. The resulting sequences, denoted as randomized constrained sequences, are characterized theoretically by deriving an analytical expression of the power spectral density. Furthermore, they are extensively compared with three synthesis approaches proposed in the literature. The approach is validated by numerical simulations and experimental results, showing the potential to achieve harmonic suppression performance of approximately 100 dB. [ABSTRACT FROM AUTHOR]

The optimal design of pulse compression waveform/filter pairs for use with near-nadir spaceborne radar in low earth orbit for the observation of clouds and precipitation is discussed. An optimization technique is introduced that considers performance metrics specific to the remote sensing of clouds and precipitation from such platforms. Specifically, the sensitivity of the radar to precipitation and clouds is maximized as close to the ground as required. The sensitivity of the radar near the surface is typically limited by the pulse compression range sidelobes from the surface’s echo. Optimization of the waveform/filter pair’s performance is facilitated by a time-domain radar scattering model to simulate radar reflectivity range profiles. The presented radar-scattering model accounts for the radar’s configuration constraints and platform motion, as well as the spatial distribution and relative motion of the scatterers. In this paper, the optimization of both linear frequency modulation (LFM) and nonlinear frequency modulation (NLFM) waveforms is considered. It is demonstrated that the LFMwaveforms provide superior performance over NLFM waveforms for application subject to unmitigated Doppler shifts. [ABSTRACT FROM PUBLISHER]

This paper proposes a control strategy for a three-phase three-wire thyristor-controlled LC -coupling hybrid active power filter (TCLC-HAPF), which can balance active power and compensate reactive power and harmonic currents under unbalanced loading. Compared with TCLC-HAPF with conventional control strategy, active power filters and hybrid active power filters which either fail to perform satisfactory compensation or require high-rating active inverter part for unbalanced compensation, a control strategy was proposed for TCLC-HAPF to operate with a small rating active inverter part for a variety of loads with satisfactory performance. The control idea is to provide different firing angles for each phase of the thyristor-controlled LC-coupling part (TCLC) to balance active power and compensate reactive power, while the active inverter part aims to compensate harmonic currents. First, the required different TCLC impedances are deduced. Then, independent firing angles referenced to the phase angle of voltage across TCLC are calculated. After angle transformations, final firing angles referenced to phase angle of load voltages are obtained. In this paper, a novel controller for TCLC-HAPF under unbalanced loading is proposed. Simulation and experimental results are provided to verify the effectiveness of the proposed controller in comparison with a state-of-the-art controller. [ABSTRACT FROM PUBLISHER]

Filter-based battery–supercapacitor hybrid energy storage systems (HESSs) are popular as a way of extending battery lifetime by diverging the high-frequency power variations to the supercapacitor. However, when a traditional supercapacitor voltage controller (SCVC) is employed in the filter-based HESS, precise sizing of the supercapacitor as well as finding filter parameters for the power allocation are challenging due to nonlinearities. These problems can be circumvented by using a supercapacitor energy controller (SCEC) proposed in this paper. The paper presents a method for selection of the SCEC and filter parameters as well as precise sizing of the supercapacitor for a given application. The proposed method is experimentally verified on a single-phase grid-connected HESS used to smooth the power delivered to the grid at the point of common coupling. It is also shown that the size of the supercapacitor when using the SCEC is significantly lower than the one estimated for the traditional SCVC. [ABSTRACT FROM PUBLISHER]

The current grid codes for distribution networks impose on operators to provide ancillary services, like fault ride through capability and reactive power compensation. In this context, generating units with power electronics interfaces could offer as an additional service the active compensation for harmonic and interharmonic currents introduced by other converters or distorting loads. Typically, the converters of these generating units do not have information on the distortion of either other loads or of the grid current. Thus, this paper presents a control algorithm for grid harmonics and interharmonics compensation that relies only on the measurement of the voltage at the point of connection of the unit. The reference for the compensating current is calculated from the harmonic components of grid voltage in the synchronous reference frame. The paper also addresses the influence on the compensation performance of the line impedance between the generating unit and the point of connection. Experimental tests on a laboratory setup fully validate the proposed compensation method. [ABSTRACT FROM PUBLISHER]

This paper proposes three balanced multiple‐layer dual‐mode substrate integrated waveguide (SIW) bandpass filters. The first balanced filter has two substrate layers, and two pairs of balanced feeding ports are located on the upper substrate layer. The lower and upper dual‐mode SIW cavities are coupled by two crossed slots in the middle metal layer. The second balanced filter has two substrate layers, and two pairs of balanced feeding ports locate parallelly on the upper and lower substrate layers, respectively. The third balanced filter has three substrate layers, and two pairs of balanced feeding ports locate vertically on the upper and lower substrate layers, respectively. The proposed three balanced filters can produce three, two and one finite‐transmission zeros (FTZs), respectively. Characteristics of the proposed multiple‐layer SIW filters with controllable FTZs' locations are analysed in detail. For the demonstration, some design examples with the centre frequency of 7.5 GHz and bandwidth of 240 MHz are presented, and three design examples are fabricated to verify the performance of the proposed balanced filters. The measured results agree well with simulated ones. [ABSTRACT FROM AUTHOR]

The paper presents the performance of the modular multilevel converter (MMC) tapping cells associated with an ac filter in terms of efficiency and power density in a hybrid LV ac/dc microgrid application and compares it to the performance of the conventional topology used in LV application, i.e., the two-level voltage source converter (2L-VSC). A biobjective optimization based on the Genetic Algorithm is hence developed, providing details on designing the components of the LCL filter, the MMC, and the 2L-VSC. The MMC reaches an efficiency of 99.4% when the main dc-grid is left floating. However, due to its modularity and scalability, offering multiport connections option, the MMC tapping cells has the disadvantage of low power density. Exploring the filtering capability of the equivalent arm inductance of the MMC seen from the ac grid side, optimization design results show that higher switching frequencies allow a significant volume reduction of the inductive components of the MMC/LCL filter while higher switching frequencies have little impact on the switching losses of the MMC. This has the benefit of reducing the overall footprint of the converter and encouraging the use of the MMC in LV application. [ABSTRACT FROM AUTHOR]

In this paper, a bandpass frequency selective surface (FSS) based on substrate-integrated waveguide (SIW) technology is presented for airborne radome application. The proposed FSS element consists of a tapered cross-slot on either side of the substrate surrounded by metallic vias. The structure selectively allows the impinging electromagnetic (EM) wave through it in the specified frequency band. The element shows very stable frequency response for oblique incidence and the sharp roll-off performance characteristics at the edges of operating region in the rejection band. The −10 dB relative bandwidth (BW) of the element is 12.8% from 9.5 to 10.8 GHz with a very good insertion loss (IL) of 0.1 dB. Furthermore, the spectacular advantages of the FSS element based on SIW have been used for modeling the airborne radome application. The proposed radome structure is operating at 10 GHz with a relative 10 dB BW of 25.0% (8.20–10.6 GHz) with maximum (IL) better than 0.1 dB in its passband. The behavior of the FSS radome has been analyzed at different conformal sectors and thickness is optimized for optimal performance. The key parameters of radome such as transmission performance, radiation efficiency, and radar cross section (RCS) have been studied. Experimental verifications are carried out to prove the validity of the estimated results. The results show promising performance of the proposed FSS based on SIW technology for airborne radome application. [ABSTRACT FROM AUTHOR]

This paper presents a new design of near-field focused metasurface for high-efficiency wireless power transfer with multifocus characteristics. A general synthesis procedure is outlined to design metasurfaces with desired multiple foci in the near-field zone. The unit cell of printed tridipole is used to realize the focused metasurface which has a large range of phase shift and is adapted to near-field focusing applications. Different feeding and focusing designs of the printed tridipole metasurfaces are proposed and analyzed. Two kinds of metasurfaces with 20×20 elements are designed, fabricated, and measured at 5.8 GHz. One is the single-feed and single-focus case, and the other is single-feed and two-focus case. Two-dimensional planar near-field scanning technique is implemented to measure the E-field focusing characteristics. Full-wave simulations and experiments demonstrate that the proposed focusing metasurfaces have a high wireless power transfer efficiency of 70%. The relative bandwidth with 50% power focusing efficiency is about 16%. The measured results are in good agreement with the theoretical designs and simulated results, which verify the feasibility and correctness of the proposed approach in this paper. [ABSTRACT FROM AUTHOR]

In this paper, a generic complex repetitive controller ($nk + m$ RC, $k\in \mathbb {Z}$), based on the inverse transfer function of the generalized delayed signal cancelation transformation is proposed. The presented complex controller can be designed for regulating different positive- and negative-sequence harmonic components through a space-vector error signal, with improved response time as compared to traditional repetitive controllers. An evaluation of the proposed control scheme stability, based on phase margin, Nyquist diagram, and sensitivity function is presented. The effects of the controller parameters on the system's stability and also on its dynamic response are shown and allow the definition of some control design guidelines. Experimental results are presented to validate the theoretical assumptions through applying the proposed controller for regulating the currents in a three-phase active power filter. [ABSTRACT FROM AUTHOR]