Search

The UK government has announced its ten-point plan to annually install 600,000 low-carbon heat pumps by 2028. However, there is a lack of evidence showing potential overheating risk in dwellings retrofitted with heat pumps. This paper examines the prevalence and magnitude of summertime overheating across 24 naturally ventilated social housing dwellings retrofitted with ground source heat pumps (GSHPs). The dwellings are located in a socially deprived area in Oxford (UK). The empirical study included longitudinal monitoring of indoor temperatures in the living rooms and bedrooms during the non-heating seasons of 2021 and 2022 (May–September), which included a record-breaking heatwave in July 2022. Indoor temperature and CO2 levels in bedrooms were monitored across a subset of six dwellings alongside the monitoring of window opening state in three bedrooms to understand the effect of natural ventilation in removing excess heat. About 136 thermal comfort surveys were conducted to ascertain the subjective responses of residents. Overheating risk assessment was carried out using CIBSE static and adaptive methods, which revealed that summertime overheating was prevalent across half of the dwellings in the non-heating season of 2022, as compared to 17% overheated dwellings in 2021. Bungalows with upgraded cavity wall insulation and top floor flats facing south and south-west had a propensity to overheat. The variation in indoor temperature and CO2 levels across a small sample also indicated the relationship between overheating and residents' behaviour. Given that the majority of the dwellings were occupied by retired elderly people with low incomes who are vulnerable to heat and cannot afford active forms of cooling, it is vital to deploy passive design measures, such as appropriate shading devices that are suitable for a heating-dominated climate and enhanced ventilation, as part of home energy retrofits. Implementing reversible heat pumps coupled with solar PVs can provide cooling during heatwaves while delivering low-carbon heat in the winter. [ABSTRACT FROM AUTHOR]

The case study presented in this paper is an innovative ground source heat pump (GSHP) system constituted by a hybrid Photovoltaic Thermal (PVT) solar system for poultry houses. Farmers tend to not to apply GSHPs because of the high prices of excavation and time consumption. The innovative heat pump system assessed in this study comprises of a new type of heat exchangers; a thin-tube solar polyethylene heat exchanger installed between roof tiles and PV panels and a novel vertical ground heat exchanger to utilize the heat stored in the soil. The heating system applied to a poultry house are monitored and evaluated under a variety of environmental and operating conditions to achieve annual/long-term efficiency of the heating system in Kirton, UK. The maximum heating demand of the poultry house is determined 34.4 MWh/PC while the minimum is 11,1 MWh/PC. The monitored results show that the heat pump produced 15.02 MWh of thermal energy per annum. Solar PV and heat pump worked very well together with solar PV covering all the heat pump's annual electrical energy requirement and generated 8.74 MWh of extra electricity exported to the grid. The seasonal coefficient of performance is found 3.73 through a year. The novel PVT-GSHP heating system is a very promising solution for high fossil fuel consumption in the agriculture industry and the energy savings of the whole system can be noticeably increased dependent up on the system controlling. [ABSTRACT FROM AUTHOR]

Currently, there has been an obvious lack of innovation within poultry houses heating, ventilation and air conditioning (HVAC) system design that deals with both energy efficiency and poultry welfare issues. This paper presents an innovative and renewable heating system for poultry house application to meet the welfare living environment requirement for breeding, to improve the energy efficiency of HVAC system and to decrease fossil fuel consumption and harmful gas emissions. The purpose of this study is to design, develop and test the highly efficient hybrid heating system via an integrated photovoltaic/thermal array with polyethylene heat exchanger coupled to geothermal heat pump system based on the East Midlands' climate conditions in the UK. The numerical model is established based on finite volume method and solved by using Engineering Equation Solver, and a good agreement with less than 15% difference between the numerical and experimental results is achieved. The results indicate that the annual electrical and thermal output are 11867 kWh and 30245 kWh, respectively, which not only could fulfil the poultry house electrical need, but also can provide ~43.5% electricity demand of the heat pump compressor operating. [ABSTRACT FROM AUTHOR]

[Display omitted] • A whole system approach to studying a low-temperature HGSHP system. • 3D coupled TH model with realistic boundaries and dynamic heat pump COP. • Design of a HGSHP system to support a 5th generation DHC network. • Different factors on performance of the HGSHP system and ground thermal behaviour. • Ground moisture transfer, cooling process and buried depth are important. Exploitation of shallow ground and its low-grade heat potential is fundamental to designing 5th generation district heating and cooling (DHC) networks. Horizontal ground-source heat pump (HGSHP) systems are a common way to utilize shallow geothermal energy. Realistic estimation and prediction of performance of a HGSHP system and shallow ground thermal behaviour should consider the whole system including building heating and cooling load, heat pump and ground heat exchanger, and the ground. This should be accompanied by realistic atmospheric and ground conditions. In this paper, a three-dimensional coupled thermal–hydraulic model with realistic boundary conditions adopting a whole system approach is presented. Dynamic heat pump coefficient of performance (COP) that depends on seasonal variation of heating/cooling demand and ground conditions are also considered. Model validations are conducted against experimental and analytical results in literatures. The model is applied for evaluating a HGSHP system to support development of a 5th generation DHC network on a potential site in the UK. Several influencing factors, such as ground moisture transfer, building thermal load mode, buried depth of ground loops, and initial ground temperature profile are studied to assess performance efficiency of the HGSHP system and evolution of ground thermal behaviour in response to heat extraction or rejection into the ground. The results show that 5% of the monthly total heat demand of the site could be met by the designed HGSHP system, consisting of 200 U-shaped ground loops buried at the depth of 3 m and pure water as the heat carrier. Overlooking the ground moisture transfer or hyperbolizing the ground saturation would overestimate the load-carrying capacity of the HGSHP system. The HGSHP system is more efficient with a higher heat pump COP under the heating and cooling mode than under the heating-only mode. Predicted performance of the HGSHP system improves with buried depth of the ground loops. The results also show that a 1 ℃ increase in the undisturbed ground temperature could suffice up to 8% of the monthly total heat demand of the site. [ABSTRACT FROM AUTHOR]

• Over the technologies' typical 20-year lifetime, most UK dwellings have a cost optimum low-carbon heating system using air source heat pumps. • Dwelling properties and spatiotemporal variabilities significantly change the optimum low-carbon technology from blue hydrogen boilers, direct electrical heating, and air source heat pumps, to ground source heat pumps. • Direct electrical heating is economically preferred over heat pumps in lower demand dwellings and with analysis over shorter timescales. • Incentives for low-carbon heating need to target adoption of efficient technologies to reduce the greater increase in network demands. An understanding of heating technologies from the consumers' perspective is critical to ensure low-carbon technologies are adopted for reducing their current associated emissions. Existing studies from the consumers' perspective do not compare and optimise the full range and combinations of potential heating systems. There is also little consideration of how spatiotemporal and dwelling variations combined alter the economic and environmental effectiveness of technologies. The novelty of this paper is the creation and use of a new comprehensive framework to capture the range of heating technologies and their viability for any specific dwelling's traits and climate from customers' perspective which is missing from current studies. The model optimises combinations of prime heaters, energy sources, ancillary solar technologies and sizes, thermal energy storage sizes and tariffs with hourly heating simulation across a year and compares their operation, capital, and lifetime costs alongside emissions to realise the true preferential heating systems for customers, which could be used by various stakeholders. Using the UK as a case study, the results show electrified heating is generally the optimum lifetime cost solution, mainly from air source heat pumps coupled with photovoltaics. However, direct electrical heating becomes more economically viable as dwelling demands reduce from smaller dwellings or warmer climates, as shorter durations of the ownership are considered, or with capital cost constraints from lower income households. Understanding this is of high importance, as without correctly targeted incentives, a larger uptake of direct electrical heating may occur, which will burden the electrical network and generation to a greater extent than more efficient heat pumps. [ABSTRACT FROM AUTHOR]