Search

The energy consumption necessary to maintain thermal comfort in buildings remains a significant and partially unjustified part, accounting for about 30–40% of the total energy consumption. Despite the increasingly pressing regulations in the energy sector (EPBD recast), the quality of the internal environment remains one of the critical parameters on which to pay more attention in view of a consistent evaluation of the Nzeb building. The windowed components are often designed with thermal insulation performances higher than the minimum requirements but still they lack in design of the incident solar radiation control, which is a particularly delicate topic for indoor comfort and more generally for a higher energy efficiency in buildings. If we think of the numerous variables of influence (typology, orientation, geographical location, etc.), the possibilities to associate energy saving, lighting control and users' comfort are inevitably entrusted to dynamic systems integrated into the glass. In this paper authors present the results related to the experimental characterization of two identical test rooms with different typologies of windows. One room is furnished with a traditional high thermal performance glass and the other, with an electrochromic glass suitably controlled by remote. The operative temperature measured in both test rooms have been utilized to verify the simulation model developed to assess the energy saving achievable in a Mediterranean climate, taking properly into account the hourly variations of the climate and the actions on the shading regulation systems. [ABSTRACT FROM AUTHOR]

This paper investigates the climate change impact on cooling energy consumption of office buildings in four major architectural climate zones in China. The results show that there are apparent differences in the responses of monthly or yearly cooling loads to climatic change in different climates. Dominant factors affecting monthly cooling loads change from dry bulb temperature (DBT) to wet bulb temperature (WBT) with the climate zones changing from severe cold to hot. The yearly cooling load was mainly afftectd by DBT in severe cold climate, whereas the WBT had the dominant effect in the other climates. With the continuous warming climate, the yearly cooling load did not rise significantly for any climate zone except for severe cold climate zone where cooling load had a significant increase ( p  < 0.01). More importantly, the cooling load showed a weak decrease in Guangzhou. These results suggest that different measurements for buildings cooling energy conservation should be made in different climate zones. The humidity effect should be fully considered to improve buildings energy efficiency, especially in the hot climate zones. The continuous increase of temperature in the future does not necessarily increase cooling loads of buildings in the cold, hot summer & cold winter and hot summer & warm winter climate zones, and change trendency of humidity in the future need to be considered to predict cooling energy consumption. [ABSTRACT FROM AUTHOR]

Climate change, driven by greenhouse gas emissions, is a growing global concern, threatening world-wide environment, health and economy. Energy needs for buildings are a large source of greenhouse gas emissions. As the energy needs of buildings strongly depends on weather patterns, this paper investigates how climate change may impact building heating and cooling loads, cost-optimal efficiency measures, and renewable energy production. Eight locations (Stockholm, Milan, Vienna, Madrid, Paris, Munich, Lisbon, and Rome) highlight differences among European climates. Weather datasets, commonly used in building energy simulations, are evaluated to see how climatic parameters have changed over recent decades. A future climate change scenario (with uncertainties) is analyzed for the year 2060. Weather files are used to drive building energy simulations for a standard baseline and a (Nearly Zero Energy Building) NZEB residential building whose design is improved using a cost-optimization approach. The analysis indicates most currently available weather datasets cannot assure reliable results with building simulations. We find the energy balance in European buildings will significantly change under future conditions: heating will decrease by 38%–57%, while cooling will increase by +99%–380% depending on location. In future NZEBs, efficiency measures to reduce cooling needs and overheating will be favored (e.g. roof insulation, window type, solar shading, envelope finishes), illustrating how improving energy efficiency will be more crucial within climate change scenarios. Compared to the baseline, more efficient NZEBs will enable renewable energy to much better cover building needs. There will also be advantages from reducing winter and summer peak demand, particularly when coupled to short-term electrical storage. When solar resource is limited in winter, more airtight, better-insulated NZEBs improve PV self-consumption. • Climate change impact is studied in baseline and NZEBs in different climates. • Different weather datasets and a climate change scenario are simulated. • Future heating loads decrease by 38%–57%, cooling increase by +99%–380%. • Energy efficiency measures to reduce cooling and overheating are favored. • NZEBs enable renewable energy to much better cover building needs. [ABSTRACT FROM AUTHOR]

• Building Bio-Climatic Charts are proposed for different climate change scenarios. • Time-varying significance of nine design parameters in this century are provided. • Effectiveness of airtightness will increase up to 329% by the end of this century. • Cooling potentials of natural ventilation will significantly decrease up to 69%. • A holistic passive design can reduce the building annual cooling load by 56.7%. The application of passive design strategies is crucial at the early architectural design stage for building energy use minimization. However, the time-varying effectiveness of passive design strategies in responding to future climate change in hot and humid climates are rather limited in the literature. This paper aims to examine the dynamic effectiveness of passive design strategies for residential buildings in Hong Kong under the context of future climate change. Using the newly developed hourly weather data and adaptive comfort standard model, the dynamic effectiveness of viable passive design strategies for residential buildings are evaluated over time in the 21st century by plotting Givoni building bio-climatic charts (BBCC) and simulation-based sensitivity analyses in a validated EnergyPlus model. Results show that solar protection strategies are still the highly sensitive strategies for building energy performance and the effectiveness of external windows' airtightness is expected to increase up to 329% by the end of this century, whereas the cooling potential of ventilation utilization will significantly decrease over time. When the different combination of sensitive passive design parameters is implemented onto the baseline residential building model for different climate scenarios, the annual and peak cooling load can be reduced up to 56.7% and 64.5%, respectively. [ABSTRACT FROM AUTHOR]