Search

Avoiding financial losses requires preventing catastrophic oil‐filled power transformer breakdowns. Continuous online transformer monitoring is needed. The authors use paper insulation to evaluate transformer health for continuous online transformer monitoring. The study suggests a new artificial intelligence method for estimating paper insulation residual life in oil‐immersed power transformers. The four artificial intelligence models use backpropagation‐based neural networks to predict paper insulation lifespan. Four primary transformer insulating paper failure indices—degree of polymerisation, 2‐furfuraldehyde, carbon monoxide, and carbon dioxide—form the basis of these models. Each model, including the backpropagation‐based neural networks, estimates paper insulation life using one failure index, along with moisture and temperature data. Optimisation techniques enhance hidden layer neurons and epoch count for improved performance. Results are validated against literature‐based life models, establishing a precise input–output correlation. This method accurately predicts the remaining useable life of power transformer paper insulation, enabling utilities to take proactive measures for safe and efficient transformer operation. [ABSTRACT FROM AUTHOR]

In order to study the cutting performance of the straight edge hob and reduce the cutting power consumption model of the straight edge hob, this paper takes the cutting power of the straight edge hob as the minimum goal, and establishes the mathematical model of the optimization design of the straight edge hob based on the composite optimization method. The mathematical model is solved by MATLAB software. At the same time,the mowing characteristics of a roller blade were studied by investigating the relationship between the hob and the coordination of variables such as rotational speed and roller diameter with the mowing parameters. The parameter analysis of straight edge hob before and after structural parameter optimization is generated, and a design method is proposed based on this. After defining the objective function and constraint conditions, the influence of structural parameters on the power consumption and efficiency of the hob was determined by optimising the complex method; this could significantly adjust the hob parameters to lower its power consumption. The energy consumption of the optimized design is reduced by 11.1 % compared with the original scheme, and the optimization effect is remarkable. The results show that the best working parameters of the hob are cutting speed of 1000 r/min, sliding cutting angle and grinding edge angle of 25~30°. Moreover, practical tests demonstrated the feasibility of using the proposed method to design the straight edge hob to improve mowing performance and hob stability. This study can provide parameter foundation and an optimization method for lowering chopping power consumption of the roller mower blade. [ABSTRACT FROM AUTHOR]

Web development frameworks help in streamlining and speedy-tracking the system of constructing web packages. There is an array of frameworks which makes it hard for developers to decide the nice option to use in their tasks. This survey paper is extensive and a comparative internet development framework, thinking about the primary additives, strengths and weaknesses of every utility. This paper involves stringent assessment technique for performance measurement metrics inclusive of reaction time, scalability, and memory. Optimization of techniques and the issues on protection for each framework also are taken into consideration. To wrap up, this paper offers steering to be able to help the readers to choose the most appropriate framework depending on their task needs. The data offered on this survey are supposed to guide developers as well as decision makers towards making quality decisions that culminate in appropriate utility on websites. [ABSTRACT FROM AUTHOR]

This paper presents an overview of pulp and paper mills (PPM) production processes, the resulting release of wastewater effluent loaded with wide range of pollutants and associated environmental impacts. The review highlighted the different types of functional materials and their modified forms employed as coagulants for pulp and paper mills industries effluent (PPME) treatment that have been intensively studied as a promising strategy for PPM to achieve cleaner and sustainable treatments in accordance with sustainable development goals (SDGs) "6-Clean water and sanitation", "9-Industry, innovation, and infrastructure", and "12-Responsible consumption and production". Standalone coagulation treatment processes are inherently ineffective towards meeting the increasingly stringent discharge requirements, coupled with their higher energy demand, and increased operational and maintenance costs. Owing to the recalcitrant nature of PPME contaminants, this review explored the effectiveness of the coagulation processes for decontamination of PPME. Furthermore, the review provides a state-of-the-art coagulation-based hybrid systems employed for enhanced PPME treatment. The process limitations, influencing factors and optimization techniques are highlighted. The review also highlights how sustained research in the subject area impacts on achieving cleaner production. The review also discusses coagulant classifications and the synergistic, antagonistic and shock load toxic effects of hybrid coagulants on toxicant biodegradation and their associated system efficiency. Moreover, it offers a guide for the development and application of sustainable hybrid-based coagulants for PPME treatment. The findings presented herein provide a vital theoretical foundation for sustainable solutions to improve coagulation-based hybrid systems efficiency and their scale-up towards potential commercialization. [Display omitted] • Pulp and paper mills produce effluents containing diverse and emerging contaminants. • Different materials and their modified forms are used as coagulants for PPME treatment. • The synergistic and shock load toxic effects of hybrid-based coagulants could be identified. • Hybrid systems are highly efficient techniques for PPME treatment. • The review highlights process weaknesses, influencing factors and optimization techniques. [ABSTRACT FROM AUTHOR]

This study examines a two-stage two-dimensional cutting stock problem encountered by a paper mill company. The problem includes various machine-related and operational constraints based on real-world situations. Paper products are manufactured using two major cutting processes. Each cutting machine has a specific minimum and maximum width for input and output rolls and is limited by the maximum number of rolls it can cut at the same time. A mathematical model is presented to formally address the problem and an efficient multiple-choice knapsack-based heuristic algorithm is proposed to solve the problem. To demonstrate the efficiency of the proposed heuristic algorithm, computational experiments are conducted on test data-set generated from real-world data provided by a large paper mill company in the Republic of Korea. [ABSTRACT FROM PUBLISHER]

Because of the overly averaged element sensitivity in the topological optimization of an irregular structure with a grid independent filter, a topological optimization model was built for the structural domain. The maximization of stiffness was first taken as the goal for the topological optimization of irregular structure stiffness. Subsequently, an element size filter was proposed to address the overly averaged local element sensitivity with the grid independent filter when the designed domain element size varied dramatically. Finally, the element sensitivity of the objective function was derived under the given constraints. A case study was then conducted on a naval gun mount with the maximization of structural flexibility as the objective function and the volume of structural material as a constraint. A stiffness optimization model based on the bi-directional evolutionary structural optimization algorithm was adopted for the topological optimization of the gun mount. Structural optimization was conducted for the gun mount with different shooting angles to realize its optimal stiffness and strength under the constraint of consistent material volume. The optimization results proved that the element independent filter proposed in this paper could be effectively applied in the topological optimization of an irregular structure and used to explore the topological optimization of the supporting structure under impact. [ABSTRACT FROM AUTHOR]

The numerical algorithm by Cristofari et al. modifies the augmented Lagrangian method ALGENCAN proposed by Andreani and his collaborators by incorporating certain second-order information into the augmented Lagrangian framework. Professor Franco Giannessi, University of Pisa, is an outstanding mathematician whose contributions to optimization theory and its applications and to the world optimization community are difficult to overstate. The paper by Izmailov and Solodov introduces and develops a novel perturbed augmented Lagrangian method framework for constrained optimization problems. [Extracted from the article]

In this paper, an efficient computational framework for the full-wave design by optimization of complex microwave passive devices, such as antennas, filters, and multiplexers, is described. The framework consists of a computational engine, a 3D object modeler, and a graphical user interface. The computational engine, which is based on a finite element method with curvilinear higher-order tetrahedral elements, is coupled with built-in or external gradient-based optimization procedures. For speed, a model order reduction technique is used and the gradient computation is achieved by perturbation with geometry deformation, processed on the level of the individual mesh nodes. To maximize performance, the framework is targeted to multicore CPU architectures and its extended version can also use multiple GPUs. To illustrate the accuracy and high efficiency of the framework, we provide examples of simulations of a dielectric resonator antenna and full-wave design by optimization of two diplexers involving tens of unknowns, and show that the design can be completed within the duration of a few simulations using industry-standard FEM solvers. The accuracy of the design is confirmed by measurements. [ABSTRACT FROM AUTHOR]

To automatic detect and characterize paper impurities with computer vision, we present a novel two parts evaluation procedure with feature representations using Alternating Direction Method of Multipliers (ADMM) sparse codes. The method is based on an offline training step to obtain sparse coefficients and codebooks via learning extracted features with ADMM optimization, followed by an online detection step to use linear SVM classifier to assess defective paper samples from no-defective ones. Our approach bridges the gap between paper impurities evaluation and sparse feature representations, taking advantages of existing ADMM algorithms to handle sparse codes problem. We compare different feature descriptors and sparse code methods to implement the procedure and experimentally validate it on a dataset of 11 paper classes. Experiment results show that the proposed method is competitive and effective in terms of evaluation accuracy and speed. [ABSTRACT FROM AUTHOR]

The interaction between technology and healthcare has a long history. However, recent years have witnessed the rapid growth and adoption of the Internet of Things (IoT) paradigm, the advent of miniature wearable biosensors, and research advances in big data techniques for effective manipulation of large, multiscale, multimodal, distributed, and heterogeneous data sets. These advances have generated new opportunities for personalized precision eHealth and mHealth services. IoT heralds a paradigm shift in the healthcare horizon by providing many advantages, including availability and accessibility, ability to personalize and tailor content, and cost-effective delivery. Although IoT eHealth has vastly expanded the possibilities to fulfill a number of existing healthcare needs, many challenges must still be addressed in order to develop consistent, suitable, safe, flexible, and power-efficient systems that are suitable fit for medical needs. To enable this transformation, it is necessary for a large number of significant technological advancements in the hardware and software communities to come together. This keynote paper addresses all these important aspects of novel IoT technologies for smart healthcare-wearable sensors, body area sensors, advanced pervasive healthcare systems, and big data analytics. It identifies new perspectives and highlights compelling research issues and challenges, such as scalability, interoperability, device-network-human interfaces, and security, with various case studies. In addition, with the help of examples, we show how knowledge from CAD areas, such as large scale analysis and optimization techniques can be applied to the important problems of eHealth. [ABSTRACT FROM AUTHOR]

This document is an editorial for a special issue of the journal AIMS Mathematics on the topic of discrete optimization. The issue includes 21 papers covering a range of subjects, including molecular trees, network systems, variational inequality problems, scheduling, image restoration, spectral clustering, integral equations, convex functions, graph products, optimization algorithms, air quality prediction, humanitarian planning, inertial methods, neural networks, transportation problems, emotion identification, fixed-point problems, structural engineering design, single machine scheduling, and ensemble learning. The papers present new theoretical results, algorithms, and applications in these areas. The guest editor expresses gratitude to the journal staff and reviewers and hopes that readers will find inspiration for their own research. [Extracted from the article]

This work presents an effective way to remove ammonium from compost using corn wastes. The study examined the role of experimental factors on the removal of ammonium using a full factor experimental design. The experimental factors and their related levels selected were as follows: Material type (corn cob and corn husk), ratio (10 and 25%), moisture (50 and 70%), and finally duration (30 and 60 days). The results were evaluated with an ANOVA test. A regression model that took into account the significant main and interaction effects was suggested. According to the optimization algorithm, the optimum levels were corn cob, 25% ratio, 50% moisture, and 60-day duration, with a removal efficiency of 91.84%. The proposed procedure is simple to implement and cost-effective. [ABSTRACT FROM AUTHOR]

The MMOR Best Paper Award is given annually to an outstanding article published in the Mathematical Methods of Operations Research journal. The 2023 award was presented to Zhuoyi Xu, Linbin Li, and Yong Xia for their paper on a partial ellipsoidal approximation scheme for nonconvex homogeneous quadratic optimization with quadratic constraints. The authors propose an efficient method to find an approximation solution for this type of optimization problem. Linbin Li is currently pursuing a Ph.D. in applied mathematics, Yong Xia is a full professor and deputy dean at Beihang University, and Zhuoyi Xu is a lecturer at Capital University of Economics and Business. Congratulations to the authors on behalf of the MMOR editorial board. [Extracted from the article]

Particle swarm optimization algorithms (PSOA) is a metaheuristic algorithm used to optimize computational problems using candidate solutions or particles based on selected quality measures. Despite the extensive research published, studies that critically examine its recent scientific developments and research impact are lacking. Therefore, the publication trends and research landscape on PSOA research were examined. The Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) and bibliometric analysis techniques were applied to identify and analyze the published documents indexed in Scopus from 2001 to 2021. The published documents on PSOA increased from 8 to 1,717 (21,362.50%) due to the growing applications of PSOA in solving computational problems. "Conference papers" is the most common document type, whereas the most prolific researcher on PSOA is Andries P. Engelbrecht (South Africa). The most active affiliation (Ministry of Education) and funding organization (National Natural Science Foundation) are based in China. The research landscape on PSOA revealed high levels of publications, citations, and collaborations among the top authors, institutions, and countries worldwide. Keywords co-occurrence analysis revealed that "particle swarm optimization (PSO)" occurred more frequently than others. The findings of the study could provide researchers and policymakers with insights into the prospects and challenges of PSOA research relative to similar algorithms in the literature. [ABSTRACT FROM AUTHOR]

The present paper presents aspects concerning the technologies to manufacturing the cambered rollers with different and big dimensions for the equipments for cellulosic pastes in order to obtain paper or for grain mill or bakery. They are identified the limits of the technologies used in present and they are identified ways to their improve, proposing research directions (including doctorate papers), having as practical purposes the improvement of the technical and economic efficiency of these technologies. We are insisting on the rapid grinding procedure at the manufacturing of the granite, basalt and rubber used at the superficial coverage of the rollers. [ABSTRACT FROM AUTHOR]

Thus, (3) treats the constraints HT ht and HT ht implicitly, and works solely with the auxiliary support variables I y i . [Extracted from the article]

This paper brieffy overviews some recent and very fresh results on a rather new class of dynamic optimization problems governed by the so-called sweeping (Moreau) processes with controlled moving sets. Uncontrolled sweeping processes have been known in dynamical systems and applications starting from 1970s while control problems for them have drawn attention of mathematicians, applied scientists, and practitioners quite recently. We discuss here such problems and major results achieved in their theory and applications. [ABSTRACT FROM AUTHOR]

Damage detection and localization in civil engineering constructions using dynamic analysis has become an important topic in recent years. This paper presents a methodology based on non-destructive detection, localization and quantification of multiple damages in simple and continuous beams, and a more complex structure, namely two-dimensional frame structure. The proposed methodology makes used of Firefly Algorithm and Genetic Algorithm as optimization tools and the Coordinate Modal Assurance Criterion as an objective function. The results show that the proposed combination of Coordinate Modal Assurance Criterion and Firefly Algorithm or Genetic Algorithm can be easily used to identify multiple local structural damages in complex structures. However, the convergence rate becomes slower for the case of multiple damages compared to the case of single damage. The effect of noise on the algorithm is further investigated. It is found that the proposed technique is able to detect the damage location and its severity with high accuracy in the presence of noise, although the convergence rate became slower than in the case when no noise is present. It is also found that the convergence rate of Firefly Algorithm is much faster than that of Genetic Algorithm. [ABSTRACT FROM AUTHOR]

This paper presents a new damage detection and localization technique based on the changes in vibration parameters using BAT and Particle Swarm Optimization algorithm. The finite element method is used to apply damage at specific element(s) of the considered beams. The damage is represented by a reduction in Young's modulus and the identification of damage is formulated as an optimization problem using objective function based on Modal Scale Factor and changes in natural frequencies. A procedure for detecting and locating damage of beam-like structures based on BAT algorithm is used. This approach presents a method that can be used to detect the single and multiple-damage positions and the rate of damage in structural elements with high accuracy after the first iteration. The results obtained using BAT algorithm are compared to those obtained using Particle Swarm Optimization Algorithm. By taking noise into account in the damage detection and localization problem, it is shown that our approach based on BAT algorithm can detect the damage locations with high accuracy. [ABSTRACT FROM AUTHOR]

In this study, pretreated organic wastes such as waste paper cups, cardboard waste, and vegetable waste were screened for the growth and lipid production of oleaginous bacteria DS-7 (isolated from the dairy effluent scum). The pretreated vegetable waste was found to be the best feedstock for biomass and lipid production by the DS-7. Further, process parameters such as inoculation time, substrate concentration (w/v) (amount of pretreated vegetable waste), pH, and inoculum size were optimized using a multi-objective optimization technique to enhance the biomass and lipid productions. The optimization study successfully enhanced the biomass concentration (g/L) and lipid content (%) by 47.9% and 15.84%, respectively in comparison with the unoptimized state. The biomass and lipid productivities were 42% (1.449 g/L/d) and 51% (1.267 g/L/d) greater than unoptimized conditions. The characteristics of the biodiesel obtained from the valorization of vegetable waste were comparable to the standard. Thus, the vegetable waste can be utilized as a potential feedstock for microbial biodiesel production. [ABSTRACT FROM AUTHOR]

This paper introduces novel mathematical optimisation models for the 2-Dimensional guillotine Cutting Stock Problem with Variable-Sized Stock that appears in a Spanish company in the honeycomb cardboard industry. This problem mainly differs from the classical cutting stock problems in the stock, which is considered variable-sized, i.e. we have to decide the panel dimensions, width, and length. This approach is helpful in industries where the stock is produced simultaneously with the cutting process. The stock is then cut into smaller rectangular pieces that must meet the customers' requirements, such as the type of item, dimensions, demands, and technical specifications. Furthermore, in the problem tackled in this paper, the cuts are guillotine, performed side to side. The proposed mathematical models are validated using real data from the company, obtaining results that drastically reduce the produced material and leftovers, reducing operation times and economic costs. [ABSTRACT FROM AUTHOR]

Purpose: This study develops an integrated zero waste discharge planning approach for improving resource efficiency in a pulp-and-paper manufacturing firm. Design/methodology/approach: The objectives of this study are to (1) identify the environmental, technical and social metrics in resource efficiency; (2) utilize fuzzy multi-objective programming and the hybrid particle swarm optimization algorithm to solve the fuzzy problem; and (3) develop an assessment for resource efficiency improvement in an industrial case study. Findings: The findings demonstrate the superiority of hybrid particle swarm optimization algorithm in generating optimal results for a pulp-and-paper manufacturing firm. Practical implications: The findings demonstrate the superiority of hybrid particle swarm optimization algorithm in generating optimal results for a pulp-and-paper manufacturing firm. Originality/value: Resource efficiency is a multi-objective problem in an uncertain environment. In particular, zero waste discharge planning involves minimizing the total cost and maximizing the waste material recovery rate, wastewater reuse, and waste heat recovery. [ABSTRACT FROM AUTHOR]

The ship piping layout is one of the essential tasks in the detailed design stage of a ship. Traditional manual expert design has disadvantages such as low efficiency, reliance on experience, and subjective influence. Therefore, this paper systematically proposes an intelligent arrangement method for ships' single, parallel, and branch pipelines. Firstly, the traditional genetic algorithm is improved and combined with the A* algorithm to solve the intelligent arrangement problem of a single pipeline in ships. Then, the parallel pipeline and branch pipeline are split into multiple single pipelines by combining with the connection point strategy to solve the arrangement problem of parallel pipeline and branch pipeline. Finally, the optimized A*-genetic algorithm proposed in this paper is compared with the A* algorithm, particle swarm algorithm, and the labyrinth-genetic algorithm used in previous research through simulation experiments. The results show that the A*-genetic algorithm of this paper is optimal in six indexes, including length, number of elbows, energy value, fitness value, number of optimal solutions, and average number of convergence generations, in the arrangement of the single pipeline. In solving the parallel pipeline and branch pipeline arrangement problems, the all-around performance of this paper's algorithm is better than that of A*-genetic algorithm and maze–genetic algorithm, respectively. The A*-genetic algorithm of this paper considers the quality of pipeline arrangement and the solution's efficiency. It verifies the adaptability and superiority of the algorithm for the intelligent arrangement of various types of pipelines in ship pipelines. [ABSTRACT FROM AUTHOR]

With a focus on the coupling problems of multivariable control for the paper cross‐directional (CD) basis weight caused by a hydraulic headbox, a novel approach of multivariable decoupling control based on sparse decomposition is proposed. The model function of the CD basis weight control for a single dilution water branch valve is used as the basis of a sparse atomic library. Then, according to the deviation curve of the CD basis weight, the particle swarm optimization (PSO) algorithm is used to obtain atoms corresponding to each control unit (the multiple dilution water branch valves) to form a sparse atomic library. As each atom in the atomic library contains the control information of the corresponding dilution water branch valve, the decoupling control of paper CD basis weight can be realized via mining control information. The essence of this method is to solve the coupling problems of multivariable control by using optimization theory. Experimental results demonstrate that this method achieves a remarkable decoupling control effect. [ABSTRACT FROM AUTHOR]

Accurate and efficient damage detection in long-term health monitoring for structures still encounters many difficulties due to the effect of environment. Furthermore, recorded big data requires efficient damage detection algorithm. In this study, an efficient and effective damage detection algorithm is proposed using transmissibility along with Mahalanobis distance and Hotelling T-square. A numerically simulated beam and an experimentally tested laboratory structure are used to validate the proposed algorithm. Results demonstrate good performance of the proposed technique in damage detection. [ABSTRACT FROM AUTHOR]

In this paper, we investigate a very challenging task of automatically generating presentation slides for academic papers. The generated presentation slides can be used as drafts to help the presenters prepare their formal slides in a quicker way. A novel system called PPSGen is proposed to address this task. It first employs the regression method to learn the importance scores of the sentences in an academic paper, and then exploits the integer linear programming (ILP) method to generate well-structured slides by selecting and aligning key phrases and sentences. Evaluation results on a test set of 200 pairs of papers and slides collected on the web demonstrate that our proposed PPSGen system can generate slides with better quality. A user study is also illustrated to show that PPSGen has a few evident advantages over baseline methods. [ABSTRACT FROM PUBLISHER]

Pyrolysis is the most commonly employed technology to convert widely available biomaβ materials into useful products like biofuels. In the present study, pyrolysis of paper mulberry (Brouβonetia papyrifera) was performed in order to observe the effect of temperature and particle size on product distribution and yield, and application of biochar product to improve growth and yield of maize. The experiments were performed in a fixed-bed reactor using three pyrolysis temperatures (350°C, 450°C, 550°C) and three particle sizes (1 mm, 2 mm and 3 mm) of B. papyrifera. The pyrolysis products were collected within three different groups as gaseous products, liquids and solid biochar. The results showed that the maximum biochar product was obtained at 350°C and 3 mm particle size while the highest bio-oil yield was attained at 450°C and 2 mm particle size. However, the optimum gas yield was achieved at 550°C and 1 mm particle size. A pot experiment was conducted to determine the effect of produced biochar on maize plant emergence, growth and yield. The results showed a substantial increase in plant height, shoot dry weight and maize yield compared to untreated control. These findings revealed that the production of biofuels can be improved by optimizing operating conditions and biochar produced during pyrolysis could be used as soil amendment for improving growth and yield of maize. © 2014 Friends Science Publishers [ABSTRACT FROM AUTHOR]

The potential of laser ablation in conservation of paper artifacts of cultural interest is under investigation since the second half of nineties. However, the works carried out on the topic are relatively a few as compared with those dedicated to stone, metal and painted artworks. Furthermore, in the latter cases, widespread applications have been successfully carried out, whereas laser cleaning of aged paper is still far from the conservation practice. There are serious risks to produce short- and/or long-term chemical alterations and/or mechanical damages at relatively low fluences. Here, we report a systematic investigation on laser removal of mold growths from prepared and naturally aged paper samples. Fundamental wavelength and second harmonic of QS Nd:YAG laser are tested and compared through optical and spectroscopic characterizations. This allowed defining optimized irradiation conditions and foreseeing further improvements from pulse duration optimization. [ABSTRACT FROM AUTHOR]

In this tutorial note we consider the class of non-convex semi-infinite optimization problems which are defined by (one or) finitely many objective functions as well as infinitely many constraints in a finitedimensional space. We present an overview of recent results on the so-called p-power transformation which changes the original problem equivalently locally around a solution point. This transformation is a convexification procedure for the Lagrangian where the functions in the original problem are substituted by their p-th powers. As a consequence, the convexity of the so-transformed Lagrangian allows the application of local duality theory and corresponding solution methods locally around this solution point of the original problem. [ABSTRACT FROM AUTHOR]

The paper entitled “Experimental investigation of machinability characteristics and multiresponse optimization of end milling in aluminium composites using response surface methodology (RSM) based grey relational analysis (GRA)”. The Authors adopted RSM based grey relational method to achieve high productivity in terms of maximum material removal rate MRR and least surface roughness, tool wear and cutting forces. Experimental design was made using RSM (central composite design) and responses were measured according to standard methods. In this study, authors had proposed the optimized Grey relational grade (GRG) ranking for machinability characteristics. However, there are some errors in their analysis, which are likely to affect the significance of their proposed ranking. So, this comment highlights the miscalculations and gives the corrected results. [ABSTRACT FROM AUTHOR]

This review paper synthesizes the recent advancements in voltage regulation techniques for active distribution networks (ADNs), particularly in contexts with high renewable energy source (RES) penetration, using photovoltaics (PVs) as a highlighted example. It covers a comprehensive analysis of various innovative strategies and optimization algorithms aimed at mitigating voltage fluctuations, optimizing network performance, and integrating smart technologies like smart inverters and energy storage systems (ESSs). The review highlights key developments in decentralized control algorithms, multi-objective optimization techniques, and the integration of advanced technologies such as soft open points (SOPs) to enhance grid stability and efficiency. The paper categorizes these strategies into two main types: analytical methods and computational methods. In conclusion, this review underscores the critical need for advanced analytical and computational methods in the voltage regulation of ADNs with high renewable energy penetration levels, highlighting the potential for significant improvements in grid stability and efficiency. [ABSTRACT FROM AUTHOR]

Object-Oriented Programming (OOP) in PHP is gaining traction due to its flexibility and control. This research paper delves into the best practices for optimizing OOP in PHP. The primary focus is on strategies such as designing classes, leveraging inheritance, and implementing caching to expedite processes. The paper also emphasizes the importance of other optimization techniques such as polymorphism, method access optimization, property access optimization, and memory management. Polymorphism allows objects of different classes to be treated as objects of a common superclass, enabling more flexible and dynamic code. Method and property access optimization involve using the most efficient ways to access methods and properties of objects, while memory management ensures that resources are used effectively. Overall, this research provides a comprehensive guide to optimizing PHP OOP, covering a wide range of techniques and strategies. It serves as a valuable resource for PHP developers looking to improve the performance and efficiency of their object-oriented applications. By employing tactics like class design, inheritance, caching, and profiling, developers can harness the full potential of OOP in PHP and build robust, high-performing applications. This paper is a must-read for anyone interested in PHP OOP and its optimization. [ABSTRACT FROM AUTHOR]

In this work, an improved moth-flame optimization algorithm is proposed to alleviate the problems of premature convergence and convergence to local minima. From the perspective of diversity, an inertia weight of diversity feedback control is introduced in the moth-flame optimization to balance the algorithm's exploitation and global search abilities. Furthermore, a small probability mutation after the position update stage is added to improve the optimization performance. The performance of the proposed algorithm is extensively evaluated on a suite of CEC'2014 series benchmark functions and four constrained engineering optimization problems. The results of the proposed algorithm are compared with the ones of other improved algorithms presented in literatures. It is observed that the proposed method has a superior performance to improve the convergence ability of the algorithm. In addition, the proposed algorithm assists in escaping the local minima. [ABSTRACT FROM AUTHOR]

With distributed energy sources connected to the distribution grid on a large scale for distributed photovoltaic power randomness, this paper proposes a flexible interconnection system optimization operation strategy. First, the virtual synchronous control technology is improved to improve the DC bus voltage stability; second, it analyzes the system operation mode to judge the output logic of PV and storage units, takes DC bus power balance as the underlying logic, and puts forward the power coordination optimization strategy and fault power supply restoration strategy with full consideration of factors such as the load balance degree of the distribution station area, the economic operation of the main transformer, and the amount of power lost in the faulty station area. It also establishes a multi-objective optimization model to obtain the power commands of each port and achieves the power flexibility mutualization of the flexible interconnected system through the accurate regulation of the soft normally open point (SNOP). Finally, a simulation model of the flexible interconnection system is built using MATLAB/Simulink to verify the effectiveness of the proposed optimization strategy. [ABSTRACT FROM AUTHOR]

Lightning strikes can cause equipment damage and power outages, so the distribution system's reliability in withstanding lightning strikes is crucial. This research paper presents a model that aims to optimise the configuration of a lightning protection system (LPS) in the power distribution system and minimise the System Average Interruption Frequency Index (SAIFI), a measure of reliability, and the associated cost investment. The proposed lightning electromagnetic transient model considers LPS factors such as feeder shielding, grounding design, and soil types, which affect critical current, flashover rates, SAIFI, and cost. A metaheuristic algorithm, PSOGSA, is used to obtain the optimal solution. The paper's main contribution is exploring grounding schemes and soil resistivity's impact on SAIFI. Using 4 grounding rods arranged in a straight line under the soil with 10 Ωm resistivity reduces grounding resistance and decreases SAIFI from 3.783 int./yr (no LPS) to 0.146 int./yr. Unshielded LPS has no significant effect on critical current for soil resistivity. Four test cases with different cost investments are considered, and numerical simulations are conducted. Shielded LPSs are more sensitive to grounding topologies and soil resistivities, wherein higher investment, with 10 Ωm soil resistivity, SAIFI decreases the most by 73.34%. In contrast, SAIFIs for 1 kΩm and 10 kΩm soil resistivities show minor decreases compared to SAIFIs with no LPS. The study emphasises the importance of considering soil resistivity and investment cost when selecting the optimal LPS configuration for distribution systems, as well as the significance of LPS selection in reducing interruptions to customers. [ABSTRACT FROM AUTHOR]

With this note, we want to open a discussion on the duality theory for Interval Optimization. We begin by showing that some duality results Wu ( J Optim Theory Appl 144:615-628, ) are useless. [ABSTRACT FROM AUTHOR]

In the context of integrated energy systems, the synergy between generalised energy storage systems and integrated energy systems has significant benefits in dealing with multi-energy coupling and improving the flexibility of energy market transactions, and the characteristics of the multi-principal game in the integrated energy market are becoming more and more obvious, but it is difficult to improve the flexibility of the transactions between "source-load-storage" in a one-way master–slave game structure, and the problem of how to establish an optimisation strategy for the coordination of integrated energy systems and energy storage systems is an urgent issue. How to establish a coordinated optimisation strategy of integrated energy system and energy storage system is an urgent problem. Therefore, this paper proposes a generalised shared energy storage and integrated energy system transaction optimisation method based on a two-stage game model, which improves the flexibility of the system transaction by constructing a two-stage game energy transaction model in which the subject acts as a leader and a gamer. Compared with the current one-way game model that does not consider the game on the energy storage side, the coordinated optimisation method proposed in this paper enables the energy storage side to participate more actively in the scheduling, which improves its revenue by 20.6%, the revenue on the energy-using side by 6.3%, and the overall revenue of the system by 5.4%, and at the same time, the load demand response regulation effect is more obvious, so the energy scheduling strategy proposed in this paper is able to weigh the interests of each subject and increase the overall economic benefits of the system. [ABSTRACT FROM AUTHOR]

The research paper represents a novel approach to the design and optimization of a compiler for a domain-specific language (DSL) focused on geometric shape creation and manipulation. The primary objective is to develop a compiler capable of generating efficient machine code while offering users a high level of abstraction. The paper begins with an overview of DSLs and compilers, emphasizing their importance in software development. Next, it outlines the specific requirements of the geometric shape DSL and proposes a compiler design that addresses them. This innovative approach considers DSL's unique features, such as shape creation and manipulation, and aims to generate high-quality machine code. The paper also discusses optimization techniques to enhance the generated code's quality and performance, including loop unrolling and instruction scheduling. These optimizations are particularly suited to the DSL, which focuses on geometric shape creation and manipulation and are integral to achieving efficient machine code generation. In conclusion, the paper emphasizes the novelty of this approach to DSL compiler design and anticipates exciting results from testing the compiler developed for the geometric shape DSL. [ABSTRACT FROM AUTHOR]

This paper offers an in-depth examination of the ergonomics of human-centred assembly systems in Industry 4.0, where manual tasks remain essential. The use of advanced technologies such as motion capture (MOCAP) and virtual reality (VR) is analysed as ways to enhance system efficiency and improve worker well-being. The paper highlights the importance of optimising assembly system performance while considering both economic and human factors. Metrics to assess ergonomic risk and productivity are discussed based on human-centred technologies, and existing operational research models are explored to analyse how human factors could be considered in optimising system performance. Additionally, the paper explores potential future directions and how they could play a role in Industry 4.0. [ABSTRACT FROM AUTHOR]

The increased application of Information and Communications Technology in automation and digitization is the driving concept towards the actualization of the Industrial Revolution 4.0. Many aspects of industrial design and operations including offshore engineering have been automated. However, the selection procedure of mooring design parameters including azimuth angle, pretension, diameter, fairlead slope, and mooring radius, which is a critical aspect of mooring system design has remained heavily based on a manual approach despite the availability of sophisticated hydrodynamic analysis software. Up to date, there is no proper review on optimisation techniques that have the potential of automating these procedures. In the past, some of the few available mooring optimisation procedures consider only the mooring lines for the prediction of optimal platform offset without due consideration to the integrity of the risers. Thus, the significance of adopting an integrated riser-mooring design methodology in the optimisation of mooring design variables is discussed in this paper where the integrity of the riser is adequately represented using a Safe Operation (SAFOP) zone polar diagram. We also review the developmental transition from the use of classical to Evolutionary Algorithms (EA) in the optimisation procedure. EA has been acknowledged as a practical alternative for solving mooring optimisation problems. Hence, some of the EA techniques are presented and their computational capabilities explored. In the last part, a concise review of the application of optimisation techniques for mooring optimisation of the different offshore floating platforms is presented based on their capabilities in minimizing platform offset and efficiency in terms of simulation time. So far, EA techniques like the Differential Evolution (DE), variants of Genetic Algorithms (GA) and Particle Swarm Optimisation (PSO) have been used to optimize mooring line design variables. Based on the discussions, the potentials of DE, RegPSO and other variants of PSO can be further explored for better efficiency. • Previous studies addressing differential evolution (DE), genetic algorithm (GE) and particle swarm optimisation (PSO) techniques used for optimisation of mooring parameters have been critically reviewed. • The integrated riser -mooring design methodology is effective in accounting for integrity of riser and mooring systems. • The application of evolutionary algorithms, particularly the variants and hybrids of DE ,PSO and GA, have proven to be efficient optimisation of mooring systems. • Some variants of PSO like the RegPSO have demonstrated improved capability in terms of escaping premature convergence , thereby resulting in better computational efficiency. [ABSTRACT FROM AUTHOR]

Water footprint (WF) is widely used as a life cycle assessment (LCA) tool to assess the environmental impacts of water usage associated with forestry-based production. The calculations of WF are significantly influenced by the raw materials and the process. Some information is available on WF in the papermaking industry. However, there has been little consideration of the correlation between the WF and the properties of paper. Technically, the WF and the properties of paper are impacted by the raw materials. Generally, the ideal formula of raw materials used to make paper could decrease the WF while maintaining the properties of the paper. In the current study, the extreme vertices mixture design was used to optimize the WF and properties of the handsheet by the raw materials. The new model indicated that the WF of the handsheet was decreased significantly while the properties was maintained through the adjustment of the raw materials. [ABSTRACT FROM AUTHOR]

A multi-modal search space can be defined as having multiple attraction basins - each basin has a single local optimum which is reached from all points in that basin when greedy local search is used. Optimization in multi-modal search spaces can then be viewed as a two-phase process. The first phase is exploration in which the most promising attraction basin is identified. The second phase is exploitation in which the best solution (i.e. the local optimum) within the previously identified attraction basin is attained. The goal of thresheld convergence is to improve the performance of search techniques during the first phase of exploration. The effectiveness of thresheld convergence has been demonstrated through applications to existing metaheuristics such as particle swarm optimization and differential evolution, and through the development of novel metaheuristics such as minimum population search and leaders and followers. [ABSTRACT FROM AUTHOR]

To fulfil the potential of Li–S batteries (LSBs) with high energy density and low cost, multiple challenges need to be addressed simultaneously. Most research in LSBs has been focused on the sulfur cathode design, although the performance is also known to be sensitive to other parameters such as binder, current collector, separator, lithium anode, and electrolyte. Here, an integrated LSB system based on the understanding of the different roles of binder, current collector, and separator is developed. By using the cross‐linked carboxymethyl cellulose–citric acid (CMC‐CA) binder, Toray carbon paper current collector, and reduced graphene oxide (rGO) coated separator, LSBs achieve a high capacity of 960 mAh g−1 after 200 cycles (2.5 mg cm−2) and 930 mAh g−1 after 50 cycles (5 mg cm−2) at 0.1 C. Moreover, the failure mechanism at a high sulfur loading with characteristics of fast capacity decay and infinite charging is discussed. This work highlights the synergistic effect of different components and the challenges towards more reliable LSBs with high sulfur loading. Lithium–sulfur batteries: The practical application of lithium–sulfur batteries depends on systematic optimization of the complicated system. A facile integrated approach based on the synergy between the current collector, binder, and separator is developed to improve the performance of batteries. The synergistic effect of different components and the failure mechanism of batteries with high sulfur loading are discussed (see scheme). [ABSTRACT FROM AUTHOR]

In this note, it is shown that there is error in the existing technique (Khan, I.U., Ahmad, T., Maan, N: A simplified novel technique for solving fully fuzzy linear programming problems. J. Optim. Theory Appl. 159:536-546, ). [ABSTRACT FROM AUTHOR]

Cyber Defense is becoming a major issue for every organization to keep business continuity intact. The presented paper explores the effectiveness of a meta-heuristic optimization algorithm-Artificial Bees Colony Algorithm (ABC) as an Nature Inspired Cyber Security mechanism to achieve adaptive defense. It experiments on the Denial- Of-Service attack scenarios which involves limiting the traffic flow for each node. Businesses today have adapted their service distribution models to include the use of the Internet, allowing them to effectively manage and interact with their customer data. This shift has created an increased reliance on online services to store vast amounts of confidential customer data, meaning any disruption or outage of these services could be disastrous for the business, leaving them without the knowledge to serve their customers. Adversaries can exploit such an event to gain unauthorized access to the confidential data of the customers. The proposed algorithm utilizes an Adaptive Defense approach to continuously select nodes that could present characteristics of a probable malicious entity. For any changes in network parameters, the cluster of nodes is selected in the prepared solution set as a probable malicious node and the traffic rate with the ratio of packet delivery is managed with respect to the properties of normal nodes to deliver a disaster recovery plan for potential businesses. [ABSTRACT FROM AUTHOR]

Copyright of Canadian Journal of Civil Engineering is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The present study originated with the concomitant production of 1.94 IU.mL-1 of pectinase, 0.34 IU.mL-1 xylanase and 0.086 IU.mL-1 cellulase from a newly isolated Bacillus firmus SDB9 in pectin salt media. Plackett-Burman Design (PBD) and Box-Behnken design (BBD) were used for optimization of mass production of pectinase using agro-residues. Statistical optimization of medium enhances the pectinase production to 17.55 IU.mL-1, 17.7% higher activity than that of unoptimized medium. The optimal pectinase activity was found at pH 8.5 and 45?C temperature. The enzyme was alkali-stable over a range of pH 7.0 to 10.0 for 1 h and thermostable at 35 to 70?C for 1h. Out of 12 tested metal cations at 1mM concentration, the enzyme was found to be hindered by the presence of three cations, whereas four cations were reported to augment, and the rest marginally subdued the activity. Pretreatment with 15 IU pectinase and 2.7 IU xylanase per gram of OD pulp reduce kappa number by 7.9%. After bleaching sequence D0-Ep-D1, the increment in pulp brightness was 2.7% with acceptable whiteness level. Pretreatment also led to a reduction in ClO2 consumption by 15% with superior brightness level. The 0.83% increase in pulp viscosity along with 3.2% gain in double fold number indicated the maintenance of relative cellulose content and strength of paper. Minor variations in burst index, tensile index and tear index reflected the conserved properties of the treated pulp. Synergistic application of mixed enzymes preparation produced from raw agro-residue headed by pectinase in preference to xylanase is first time set forth in the present study to help in cost economization and propel the pulp and paper industries towards environmental friendly future. [ABSTRACT FROM AUTHOR]

Currently, the waste shavings are either directly recycled to produce regenerated leather or used to extract collagen. Both methods are complex and unfriendly to the environment. This paper aims to recycle waste chrome shavings in a clean, simple and low-consumption manner. For this purpose, the hot-pressing method was selected to prepare genuine full-grain leather (GFGL) plates. Then, the author probed into the influencing factors and their impacts of hotpress forming and the physical-mechanical properties of the preliminary plates, i.e. the hotpressing products of prefabricated plates. Through the research, the optimal hot-pressing conditions and formula for GFGL plates made of natural rubber latex were determined as: (1) latex ratio 15 %, water ratio 2:1, 110 ℃, 6min and 5MPa; (2) latex ratio 21 %, water ratio 2.5:1, 100 ℃, 4min and 5MPa. Note that the latex ratio refers to the ratio of latex weight to the total weight of shavings and latex, and the water ratio refers to the weight ratio of water to latex. [ABSTRACT FROM AUTHOR]