Search

The fabrication of new membrane that is able to produce stable high power density is essential for the development of pressure retarded osmosis (PRO) technology. In this work, thin film composite (TFC) polyetherimide membranes with three different substrate structures were fabricated and characterized. The PRO performance of the resultant membrane was evaluated through two pressure cycle experiments and stability tests. The primary objective of this work is to systematically study PRO membrane’s mechanical stability and mass transfer properties under high operating pressures, which determine the power density of the membrane in the PRO process. Experiments revealed that water permeability ( A p ) and salt permeability ( B p ) under different pressures varied. The A p and B p are better indicators for examining the variation of PRO membrane structure under pressure. Within the operating pressure range of 17.2 bar, the top polyamide layer of TFC PEI-2# membrane mainly experienced a reversible deformation. In the two pressure cycle tests, the water flux, specific salt flux and power density obtained in the upward and downward measurements in each cycle are close to each other. The first cycle and the second cycle also show excellent reproducibility. The membrane was able to maintain almost unchanged water flux and power density of 12.8 W/m 2 at 17.2 bar over the 10 h testing time, suggesting the membrane’s great potential to be used in practical application in the future. [ABSTRACT FROM AUTHOR]

Abstract Forward osmosis (FO) membranes have received attention as an energy-efficient and low-cost technique in stream concentrating processes. In this work, a novel double-skinned hollow fiber thin film composite (TFC) FO membrane has been successfully fabricated, which consists of a one-step prepared dual layer substrate and a thin inner selective layer formed via interfacial polymerization. The substrate consists of a relatively dense ultrafiltration (UF) outer layer and a porous UF inner layer, both of which were constructed from polyethersulfone (PES) as the substrate material by using dual-layer co-extrusion technique. Compared to the commercial and reported double-skinned FO membranes, the FO membrane developed in this work exhibited a higher permeate flux with humic acid solution as feed. Furthermore, the double-skinned FO membrane was applied in concentrating activated sludge using 0.5 M NaCl as draw solution, and a permeate flux at 5.4 L/m2h was achieved after 5 h operation, which was higher than or comparable to those of the reported FO membranes. Membrane autopsies and foulant analysis suggested that the dense UF skin layer helped to reject greater-sized organic foulants (> 300 Da). This study shed light on the important fabrication features and promising application of the double-skinned hollow fiber TFC FO membrane in sludge concentration. Graphical abstract fx1 Highlights • A dual-layer UF substrate was prepared via a single-step fabrication process. • TFC FO membrane was fabricated via interfacial polymerization in the lumen of the substrate. • FO performance in sludge thickening process was investigated. • Tight UF layer helped rejecting greater-sized organics in sludge. • A permeate flux of 5.4 L/m2h was achieved after 5 h operation using 0.5 M NaCl as draw solution. [ABSTRACT FROM AUTHOR]

The salinity gradient is a renewable and sustainable energy source that can be utilized by a pressure-retarded osmosis (PRO) process. Development of the PRO technology was impeded by shortage of efficient membranes until recent surge on PRO research. In this work, flat-sheet thin film composite (TFC) PRO membranes with reinforced support layer were developed. The membrane properties were optimized by blending high molecular weight polyvinylpyrrolidone (PVP) into the polysulfone (PSf) casting solution. Influences of PVP addition on the kinetic and thermodynamic properties of the casting solution, resultant membrane properties as well as PRO performance were systematically investigated. It is showed that PVP can effectively improve the membrane morphology and pore structure. By adjusting the PSf/PVP composition in the substrate recipe, the reinforced TFC membrane is able to achieve a power density of 12.9 W/m 2 at 22 bar using 1 M NaCl draw solution and pure water feed. Long-term PRO test at the peak power density and multi-pressure cycle tests were performed on the membranes. Consistent power density and low salt flux/water flux ratio were observed in the whole tests. The results demonstrated that the reinforced TFC membrane in this study had excellent mechanical strength and stability. It would be promising for future engineering application. [ABSTRACT FROM AUTHOR]

The emerging thin film composite (TFC) forward osmosis (FO) and pressure retarded osmosis (PRO) membranes generally have better separation properties compared with their cellulose triacetate (CTA) counterparts. Nevertheless, their scaling performance has been rarely reported. In the current study, the phenomenon of membrane integrity loss as a result of scaling is reported for the first time for osmotically driven membrane processes (ODMPs). The results show that the TFC membrane suffered marked flux reduction during the scaling in the active-layer-facing-feed-solution (AL-FS) orientation, accompanied with the severe damage of the membrane active layer. The membrane integrity loss is attributed to the scale formation and growth in the confined space between the membrane and the feed spacer. Compared with the CTA membrane, the TFC was more prone to scaling and membrane damage due to its unfavorable physiochemical properties (presence of Ca 2 + binding sites and ridge-and-valley roughness). Although antiscalant addition was shown to be effective for scaling control in AL-FS, it was ineffective in the active-layer-facing-draw-solution orientation. The current study reveals the critical need for scaling control in ODMP processes with respect to the membrane integrity and flux stability. The results also have far-reaching implications for FO and PRO membrane design and process operation. [ABSTRACT FROM AUTHOR]