Search

Imperfect Channel State Information at the Transmitter (CSIT) is inevitable in modern wireless communication networks, and results in severe multi-user interference in multi-antenna Broadcast Channel (BC). While the capacity of multi-antenna (Gaussian) BC with perfect CSIT is known and achieved by Dirty Paper Coding (DPC), the capacity and the capacity-achieving strategy of multi-antenna BC with imperfect CSIT remain unknown. Conventional approaches therefore rely on applying communication strategies designed for perfect CSIT to the imperfect CSIT setting. In this work, we break this conventional routine and make two major contributions. First, we show that linearly precoded Rate-Splitting (RS), relying on the split of messages into common and private parts and linear precoding at the transmitter, and successive interference cancellation at the receivers, can achieve larger rate region than DPC in multi-antenna BC with partial CSIT. Second, we propose a novel scheme, denoted as Dirty Paper Coded Rate-Splitting (DPCRS), that relies on RS to split the user messages into common and private parts, and DPC to encode the private parts. We show that the rate region of DPCRS in Multiple-Input Single-Output (MISO) BC with partial CSIT is enlarged beyond that of conventional DPC and that of linearly precoded RS. Gaining benefits from the capability of RS to partially decode the interference and partially treat interference as noise, DPCRS is less sensitive to CSIT inaccuracies, networks loads and user deployments compared with DPC and other existing transmission strategies. [ABSTRACT FROM AUTHOR]

The “carbon copy onto dirty paper” (CCDP) channel is the compound “writing on dirty paper” channel in which the channel output is obtained as the sum of the channel input, white Gaussian noise and a Gaussian state sequence randomly selected among a set possible realizations. The transmitter has non-causal knowledge of the set of possible state sequences but does not know which sequence is selected to produce the channel output. We study the capacity of the CCDP channel for two scenarios: 1) the state sequences are independent and identically distributed; and 2) the state sequences are scaled versions of the same sequence. In the first scenario, we show that a combination of superposition coding, time-sharing, and Gel’fand-Pinsker binning is sufficient to approach the capacity to within 3 bits per channel use for any number of possible state realizations. In the second scenario, we derive capacity to within 4 bits per channel use for the case of two possible state sequences. This result is extended to the CCDP channel with any number of possible state sequences under certain conditions on the scaling parameters, which we denote as “strong fading” regime. We conclude by providing some remarks on the capacity of the CCDP channel in which the state sequences have any jointly Gaussian distribution. [ABSTRACT FROM AUTHOR]

Millimeter-wave imaging may be used to assist in the problem of wastepaper recognition during the sorting and recycling process. Currently, there are a variety of techniques, which are used within materials recovery facilities to sort waste paper and card; however, improvements in sorting capability can be realized using a multiple sensors to provide complementary (orthogonal) data. This paper discusses the issues related to the processes, which are currently used for sorting of recycled wastepaper and the phenomenology for millimeter-wave imaging of a wastepaper material. Experimental measurements and images in the millimeter wave band are presented, which support the proposed application. [ABSTRACT FROM PUBLISHER]

A multiple-input multiple-output (MIMO) version of the dirty paper channel is studied, where the channel input and the dirt experience the same fading process, and the fading channel state is known at the receiver. This represents settings where signal and interference sources are co-located, such as in the broadcast channel. First, a variant of Costa’s dirty paper coding is presented, whose achievable rates are within a constant gap to capacity for all signal and dirt powers. In addition, a lattice coding and decoding scheme is proposed, whose decision regions are independent of the channel realizations. Under Rayleigh fading, the gap to capacity of the lattice coding scheme vanishes with the number of receive antennas, even at finite Signal-to-Noise Ratio (SNR). Thus, although the capacity of the fading dirty paper channel remains unknown, this paper shows it is not far from its dirt-free counterpart. The insights from the dirty paper channel directly lead to transmission strategies for the two-user MIMO broadcast channel, where the transmitter emits a superposition of desired and undesired (dirt) signals with respect to each receiver. The performance of the lattice coding scheme is analyzed under different fading dynamics for the two users, showing that high-dimensional lattices achieve rates close to capacity. [ABSTRACT FROM PUBLISHER]

Aviation is often seen as an innovative sector eager to seek technological solutions. It is often assumed that aircraft cockpits have panels with electronic displays and many buttons, some labeled "auto." While this might be the case for commercial aviation (Figure 1), the vast majority of noncommercial civil aircraft cockpits look nothing like these modern cockpits. Non-commercial civil aircraft, known as general aviation (GA), typically have cockpits that mainly consist of analog instruments that show the heading of the aircraft, the altitude, and the air speed (Figure 2). While flying, the pilots make calculations using a compass and an aviation calculator. Due to the slow entry rate of new, glass-cockpit aircraft [1], the composition of the GA aircraft fleet is not going to change any time soon. [ABSTRACT FROM AUTHOR]

This paper studies the secure transmission in a multiuser broadcast channel where only the statistical channel state information of the eavesdropper is available. We propose to apply secret dirty-paper coding (S-DPC) in this scenario to support the secure transmission of one user and the normal (unclassified) transmission of the other users. By adopting the S-DPC and encoding the secret message in the first place, all the information-bearing signals of the normal transmission are treated as noise by potential eavesdroppers and thus provide secrecy for the secure transmission. In this way, the proposed approach exploits the intrinsic secrecy of multiuser broadcasting and can serve as an energy-efficient alternative to the traditional artificial noise (AN) scheme. To evaluate the secrecy performance of this approach and compare it with the AN scheme, we propose two S-DPC-based secure transmission schemes for maximizing the secrecy rate under constraints on the secrecy outage probability (SOP) and the normal transmission rates. The first scheme directly optimizes the covariance matrices of the transmit signals, and a novel approximation of the intractable SOP constraint is derived to facilitate the optimization. The second scheme combines zero-forcing dirty-paper coding and AN, and the optimization involves only power allocation. We establish efficient numerical algorithms to solve the optimization problems for both schemes. Theoretical and simulation results confirm that, in addition to supporting the normal transmission, the achievable secrecy rates of the proposed schemes can be close to that of the traditional AN scheme, which supports only the secure transmission of one user. [ABSTRACT FROM PUBLISHER]

A memoryless bivariate Gaussian source is transmitted to a pair of receivers over an average-power limited bandwidth-matched Gaussian broadcast channel. Based on their observations, Receiver 1 reconstructs the first source component while Receiver 2 reconstructs the second source component both seeking to minimize the expected squared-error distortions. In addition to the source transmission digital information at a specified rate should be conveyed reliably to Receiver 1–the “stronger” receiver. Given the message rate we characterize the achievable distortions region. Specifically, there is an ${\sf SNR}$ -threshold below which Dirty Paper coding of the digital information against a linear combination of the source components is optimal. The threshold is a function of the digital information rate, the source correlation and the distortion at the “stronger” receiver. Above this threshold a Dirty Paper coding extension of the Tian-Diggavi-Shamai hybrid scheme is shown to be optimal. [ABSTRACT FROM AUTHOR]

Superchannel transmission is a candidate to realize Tb/s-class high-speed optical communications. In order to achieve higher spectrum efficiency, the channel spacing shall be as narrow as possible. However, densely allocated channels can cause non-negligible inter-channel interference (ICI) especially when the channel spacing is close to or below the Nyquist bandwidth. In this paper, we consider joint decoding to cancel the ICI in dense superchannel transmission. To further improve the spectrum efficiency, we propose the use of Han–Kobayashi superposition coding. In addition, for the case when neighboring subchannel transmitters can share data, we introduce dirty-paper coding for pre-cancelation of the ICI. We analytically evaluate the potential gains of these methods when ICI is present for sub-Nyquist channel spacing. [ABSTRACT FROM PUBLISHER]

This paper analyzes priority-based distributed access control in vehicular networks. Characterizing the spatial correlation between vehicles, users, and roads, this paper uses Cox point processes to model vehicles and users, respectively. Then, this paper proposes that each vehicle transmits if it has the highest priority among all of its neighbors. Using the stochastic geometry framework, this paper derives the probability that a typical vehicle is retained to transmit. Then, this paper derives a second-order moment measure of the retained point process to evaluate the signal-to-interference (SIR) distribution of a typical user. The derived SIR distribution is compared to the system-level simulation of the SIR distribution of a typical user. [ABSTRACT FROM AUTHOR]

In this paper, we consider encoding strategies for the Z-channel with noiseless feedback. We analyze the combinatorial setting where the maximum number of errors inflicted by an adversary is proportional to the number of transmissions, which goes to infinity. Without feedback, it is known that the rate of optimal asymmetric-error-correcting codes for the error fraction $\tau \ge 1/4$ vanishes as the blocklength grows. In this paper, we give an efficient feedback encoding scheme with $n$ transmissions that achieves a positive rate for any fraction of errors $\tau < 1$ and $n\to \infty $. Additionally, we state an upper bound on the rate of asymptotically long feedback asymmetric error-correcting codes. [ABSTRACT FROM AUTHOR]

In this paper, we study the issue of selecting the transmission power (energy per symbol) to minimize the expected energy required to successfully deliver a link-layer packet to the destination node in a wireless link performing the automatic repeat request. We consider the system that has a slow-fading channel and employs a minimum mean square error-based channel estimation scheme for a pilot symbol-assisted modulation. We derive a closed-form expression for the packet error probability (PkEP) in the presence of channel estimation error, and we use this expression for minimizing the PkEP in allocating the transmission energy among the pilot and data symbols. We also derive the expected energy required to successfully deliver a link-layer packet as a function of the transmission power and present an optimization method based on the properties of this function. [ABSTRACT FROM PUBLISHER]

Motivated by the fact that living cells use molecular circuits (i.e., a set of chemical reactions) for information processing, this paper investigates the problem of designing molecular circuits for demodulation. In our earlier work, we use a Markovian approach to derive a demodulator for diffusion-based molecular communication. The demodulation filters take the form of an ordinary differential equation, which computes the log-posteriori probability of a transmission symbol being sent. This paper considers the realization of these demodulation filters using molecular circuits assuming the transmission symbols are rectangular pulses of the same duration but different amplitudes, i.e., concentration modulation. This paper makes a number of contributions. First, we use time-scale separation and renewal theory to analytically derive an approximation of the demodulation filter from our earlier work. Second, we present a method to turn this approximation into a molecular circuit. By using simulations, we show that the output of the derived molecular circuit is approximately equal to the log-posteriori probability calculated by the exact demodulation filter if the log-posteriori probability is positive. Third, we demonstrate that a biochemical circuit in yeast behaves similarly to the derived molecular demodulation filter and is therefore a candidate for implementing the derived filter. [ABSTRACT FROM AUTHOR]

The scientific world is becoming more open to the public and fellow researchers. Open access publishing is becoming accepted, even if some publishers are resisting. The next step is the open code and data paradigm, which was briefly discussed in the "From the Editor" column in the November 2018 issue of IEEE Signal Processing Magazine (SPM) [1]. In this column, I follow up on this topic by sharing my experiences, best practices, and thoughts about reproducible research. [ABSTRACT FROM AUTHOR]

In this paper, we formulate a recently proposed qualitative imaging approach named near-field orthogonality sampling method (NOSM) for a general measurement configuration. In the very first version, the NOSM was basically a backpropagation method, which analytically transforms the scattered fields, which is obtained with some specific multiview–multistatic measurement configurations (circular or linear), to reduced scattered electric fields on the sampling domain, which encapsulates the targets. The contributions of this paper are: 1) physical meaning of the reduced scattered field of the NOSM is explained by showing how it approximates the contrast source values in the sampling domain for different generic and limited aperture configurations; 2) the application of the NOSM is generalized to a generic configuration and some comments are made how to reduce the computational complexity and source requirements; 3) the reciprocity of the data is accounted for to improve the performance for limited aperture measurement scenarios; and 4) finally, a useful modified indicator is obtained by relying on the physical meaning of the indicator. The accuracy and stability of the proposed formulations are corroborated with numerical examples for which the excitation-measurement configuration is of limited aperture. [ABSTRACT FROM AUTHOR]

Interference management is a fundamental issue in device-to-device (D2D) communications whenever the transmitter-and-receiver pairs are located in close proximity and frequencies are fully reused, so active links may severely interfere with each other. This paper devises an optimization strategy named FPLinQ to coordinate the link scheduling decisions among the interfering links, along with power control and beamforming. The key enabler is a novel optimization method called matrix fractional programming (FP) that generalizes previous scalar and vector forms of FP in allowing multiple data streams per link. From a theoretical perspective, this paper provides a deeper understanding of FP by showing a connection to the minorization-maximization (MM) algorithm. From an application perspective, this paper shows that as compared to the existing methods for coordinating scheduling in the D2D network, such as FlashLinQ, ITLinQ, and ITLinQ+, the proposed FPLinQ approach is more general in allowing multiple antennas at both the transmitters and the receivers, and further in allowing arbitrary and multiple possible associations between the devices via matching. Numerical results show that FPLinQ significantly outperforms the previous state-of-the-art in a typical D2D communication environment. [ABSTRACT FROM AUTHOR]

This paper investigates the interference nulling capability of reconfigurable intelligent surface (RIS) in a multiuser environment where multiple single-antenna transceivers communicate simultaneously in a shared spectrum. From a theoretical perspective, we show that when the channels between the RIS and the transceivers have line-of-sight and the direct paths are blocked, it is possible to adjust the phases of the RIS elements to null out all the interference completely and to achieve the maximum $K$ degrees-of-freedom (DoF) in the overall $K$ -user interference channel, provided that the number of RIS elements exceeds some finite value that depends on $K$. Algorithmically, for any fixed channel realization we formulate the interference nulling problem as a feasibility problem, and propose an alternating projection algorithm to efficiently solve the resulting nonconvex problem with local convergence guarantee. Numerical results show that the proposed alternating projection algorithm can null all the interference if the number of RIS elements is only slightly larger than a threshold of $2K(K-1)$. For the practical sum-rate maximization objective, this paper proposes to use the zero-forcing solution obtained from alternating projection as an initial point for subsequent Riemannian conjugate gradient optimization and shows that it has a significant performance advantage over random initializations. For the objective of maximizing the minimum rate, this paper proposes a subgradient projection method which is capable of achieving excellent performance at low complexity. [ABSTRACT FROM AUTHOR]

For multi-user multiple-input-multiple-output (MU-MIMO) system, transmitter utilizes a pre-equalizer based precoding to cancel inter-stream interference for parallel transmission with the aid of accurate feedback of channel state information (CSI) from all receivers. The correct power scaling factor, which normalizes the symbols power of precoding to be a constant one, is required at each receiver. Due to CSI error and limitation of feed-forward link, the received inaccurate power scaling factor will shrink or expand the received constellation points which severely degrades the performance of MIMO system. In this paper, using nonlinear vector perturbation (VP) and linear zero-forcing (ZF) precoding, we analyze the impact of inaccurate power scaling factor on the performance of a MIMO precoding system. The analyzed results show that the mismatched modulo size from inaccurate power scaling factor severely degrades the performance of the VP system, especially for high order M-QAM modulation. In addition, the performance degradation is strongly related with the distribution of representation points for each M-QAM symbol. For linear ZF precoding, the performance loss from the shrinked or expanded constellation points is severe for system using high order M-QAM. In addition, to alleviate the performance degradation, we propose a VP system using partial perturbation points (PPP). By limiting the region of redundant points with vector perturbation for partial M-QAM symbols, the performance degradation due to the inaccurate power scaling factor can be alleviated. [ABSTRACT FROM AUTHOR]

The maximum efficiency point of an inductive power link depends on its load power consumption and the distance between the transmitter and the receiver. Matching networks (MNs) and adjustable ac–dc converters have been proposed in the literature as a means to achieve and track this maximum efficiency point. Most of the published papers in inductive power transmission only use one of these two methods without considering a joint design. In this paper, we analyze and compare both methods proposing a general joint design which exploits the advantages of each method. A proof-of-concept system was developed following the proposed flow, built and tested. This system, with a regulated output voltage, presents improvements in measured efficiencies of up to 80% (from 9.2% to 16%) at the largest distances, thus maximizing the distance range. The same approach can be used to maximize output dc voltage, instead of the link efficiency. The proposed system using our designed MN achieved a maximum output voltage that was 90% higher (from 1.36 to 2.59 V) than the case where only a step-up converter was used. [ABSTRACT FROM AUTHOR]

This paper studies the secrecy performance of a wireless network (primary network) overlaid with an ambient RF energy harvesting Internet of Things (IoT) network (secondary network). The nodes in the secondary network are assumed to be solely powered by ambient RF energy harvested from the transmissions of the primary network. We assume that the secondary nodes can eavesdrop on the primary transmissions due to which the primary network uses secrecy guard zones. The primary transmitter goes silent if any secondary receiver is detected within its guard zone. Using tools from stochastic geometry, we derive the probability of successful connection of the primary network as well as the probability of secure communication. Two conditions must be jointly satisfied in order to ensure successful connection: 1) the signal-to-interference-plus-noise ratio (SINR) at the primary receiver is above a predefined threshold, and 2) the primary transmitter is not silent. In order to ensure secure communication, the SINR value at each of the secondary nodes should be less than a predefined threshold. Clearly, when more secondary nodes are deployed, more primary transmitters will remain silent for a given guard zone radius, which will in turn impact the amount of energy harvested by the secondary network. Our results concretely show the existence of an optimal deployment density for the secondary network that maximizes the density of nodes that are able to harvest sufficient amount of energy. Furthermore, we show the dependence of this optimal deployment density on the guard zone radius of the primary network. In addition, we show that the optimal guard zone radius selected by the primary network is a function of the deployment density of the secondary network. This interesting coupling between the performance of the two networks is studied using tools from game theory. We propose an algorithm that can assist the two networks to converge to Nash equilibrium. The convergence of this algorithm is verified using simulations. Overall, this paper is one of the few concrete works that symbiotically merge tools from stochastic geometry and game theory. [ABSTRACT FROM PUBLISHER]

This paper investigates the Gaussian state-dependent interference channel (IC) and Z-IC, in which two receivers are corrupted respectively by two different but correlated states that are noncausally known to two transmitters but are unknown to the receivers. Three interference regimes are studied, and the capacity region boundary or the sum capacity boundary is characterized either fully or partially under various channel parameters. In particular, the impact of the correlation between states on cancellation of state and interference as well as achievability of capacity is explored with numerical illustrations. For the very strong interference regime, the capacity region is achieved by the scheme where the two transmitters implement a cooperative dirty paper coding. For the strong but not very strong interference regime, the sum-rate capacity is characterized by rate splitting, layered dirty paper coding, and successive cancellation. For the weak interference regime, the sum-rate capacity is achieved via dirty paper coding individually at two receivers as well as treating interference as noise. This paper also provides the achievable region for the state-dependent IC with each state known at its corresponding transmitter. [ABSTRACT FROM AUTHOR]

The optimal scheduling of interfering links in a dense wireless network with full frequency reuse is a challenging task. The traditional method involves first estimating all the interfering channel strengths and then optimizing the scheduling based on the model. This model-based method is, however, resource intensive and computationally hard because channel estimation is expensive in dense networks; furthermore, finding even a locally optimal solution of the resulting optimization problem may be computationally complex. This paper shows that by using a deep learning approach, it is possible to bypass the channel estimation and to schedule links efficiently based solely on the geographic locations of the transmitters and the receivers due to the fact that in many propagation environments, the wireless channel strength is largely a function of the distance-dependent path-loss. This is accomplished by unsupervised training over randomly deployed networks and by using a novel neural network architecture that computes the geographic spatial convolutions of the interfering or interfered neighboring nodes along with subsequent multiple feedback stages to learn the optimum solution. The resulting neural network gives a near-optimal performance for sum-rate maximization and is capable of generalizing to larger deployment areas and to deployments of different link densities. Moreover, to provide fairness, this paper proposes a novel scheduling approach that utilizes the sum-rate optimal scheduling algorithm over judiciously chosen subsets of links for maximizing a proportional fairness objective over the network. The proposed approach shows highly competitive and generalizable network utility maximization results. [ABSTRACT FROM AUTHOR]

The universal filtered multicarrier (UFMC) modulation is among the most considered solutions for the realization of beyond orthogonal frequency division multiplexing (OFDM) air interfaces for future wireless networks. This paper focuses on the design and analysis of a UFMC transceiver equipped with multiple antennas and operating at millimeter-wave carrier frequencies. This paper provides the full mathematical model of an MIMO-UFMC transceiver, taking into account the presence of hybrid analog/digital beamformers at both ends of the communication links. Then, several detection structures are proposed, both for the case of single-packet isolated transmission and for the case of multiple-packet continuous transmission. In the latter situation, this paper also considers the case in which no guard time among adjacent packets is inserted, trading off an increased level of interference with higher values of spectral efficiency. At the analysis stage, several considered detection structures and transmission schemes are compared in terms of bit-error rate, root-mean-square error, and system throughput. The numerical results show that the proposed transceiver algorithms are effective and that the linear minimum mean-square error (MMSE) data detector is capable of well managing the increased interference brought by the removal of guard times among consecutive packets, thus yielding throughput gains of about 10%–13%. The effect of phase noise at the receiver is also numerically assessed, and it is shown that the recursive implementation of the linear MMSE exhibits some degree of robustness against this disturbance. [ABSTRACT FROM AUTHOR]

This paper investigates the noncoherent detection in a two-way relay channel operated with physical-layer network coding (PNC), assuming FSK modulation and short-packet transmissions. For noncoherent detection, the detector has access to the magnitude but not the phase of the received signal. For conventional communication in which a receiver receives the signal from a transmitter only, the phase does not affect the magnitude, and hence the performance of the noncoherent detector is independent of the phase. PNC, on the other hand, is a multiuser system in which a receiver receives signals from multiple transmitters simultaneously. The relative phase of the signals from different transmitters affects the received signal magnitude through constructive-destructive interference. In particular, for good performance, the noncoherent detector of a multiuser system such as PNC must take into account the influence of the relative phase on the signal magnitude. Building on this observation, this paper delves into the fundamentals of PNC noncoherent detector design. To avoid excessive overhead, we assume a set-up in which the short packets in the PNC system do not have preambles. We show how the relative phase can be deduced directly from the magnitudes of the received data symbols, and that the knowledge of the relative phase thus deduced can in turn be used to enhance performance of noncoherent detection. Our overall detector design consists of two components: 1) a channel gains estimator that estimates channel gains without preambles; and 2) a detector that builds on top of the estimated channel gains to jointly estimate relative phase and detect data using a belief propagation algorithm. Numerical results show that our detector performs nearly as well as a “fictitious” optimal detector that has perfect knowledge of the channel gains and relative phase. Although this paper focuses on PNC with FSK modulation, we believe that the insight of this paper applies generally to noncoherent detection in other multiuser systems with other modulations. Specifically, our insight is that the relative phase of overlapped signals affects the signal magnitude in multiuser systems, but fortunately the relative phase can be deduced from the magnitudes and this knowledge can be used to improve the detection performance. [ABSTRACT FROM AUTHOR]

In wireless networks, the link connectivity may be intermittent due to shadowing, burstiness of data arrival, or uncoordinated resource allocation. In this paper, we model the intermittence of links as Bernoulli distributed random channel states, termed intermittence channel states, and study the impact of the corresponding channel state information at the transmitter (CSIT) in a two-user Gaussian broadcast channel (BC). Moreover, due to the heterogeneous timeliness of intermittence channel states, the CSIT considered in this paper is hybrid. More specifically, the CSIT of each link can be perfectly (causally or non-causally) available, delayed, or not available. When the links are connected, we adopt a general setting that the received signal-to-noise ratios can be different. Our contribution is the characterization of the capacity regions of intermittent Gaussian BC to within bounded gaps for all combinations of hybrid CSIT, except for scenario DN (delayed CSIT of receiver 1, no CSIT of receiver 2). For scenario DN, we propose an opportunistic physical layer network coding scheme that achieves a strictly larger degree-of-freedom (DoF) region than the no-CSIT DoF region. As a corollary, single-user CSIT is able to increase the sum DoF for intermittent Gaussian BC (also the capacity region for the erasure BC, as a by-product). This result is in sharp contrast to the recent negative result by Davoodi and Jafar, where it is shown that for fast-fading multiple-input single-output BC with continuous channel states, single-user CSIT does not help at all in terms of sum DoF. [ABSTRACT FROM AUTHOR]

This paper provides a comprehensive performance comparison between a current robust military waveform; namely, MIL-STD-188-110D, Waveform 0, and a filter bank multicarrier spread-spectrum (FBMC-SS) waveform proposed for communications through ionospheric/skywave HF channels. Waveform 0 is effectively a direct sequence spread spectrum waveform that uses Walsh multi-codes to enhance the information transmission rate. It may thus be referred to as Walsh-DSSS. FBMC-SS, on the other hand, makes use of filter banks to provide excellent performance when the received signal is subject to partial band interference. Successful application of FBMC-SS for communications across skywave HF channels has been previously demonstrated, both theoretically and through experimental work. However, very little has been done to contrast FBMC-SS against Walsh-DSSS. The goal of this paper is to first add new features to FBMC-SS to bring it on par with Walsh-DSSS. These features include: (i), introduction of multi-codes that achieve a comparable (or better) data rate to Walsh-DSSS; and (ii), addition of a scrambling step applied to the multi-codes to make the receiver detection robust against widely spread multipaths. With this established, in the second part of the paper, we examine the performance of the developed FBMC-SS against Walsh-DSSS when both are applied for communications across skywave HF channels. The two waveforms are compared both through a theoretical study and through experimental works across several skywave channels ranging from hundreds to thousands of kilometers. [ABSTRACT FROM AUTHOR]

This paper proposes a 3D LiDAR aided global navigation satellite system (GNSS) non-line-of-sight (NLOS) mitigation method due to both static buildings and dynamic objects. A sliding window map describing the environment of the ego-vehicle is first generated, based on real-time 3D point clouds from a 3D LiDAR sensor. Subsequently, the NLOS receptions are detected based on the sliding window map using a proposed quick searching method which eliminates the reliance on the initial guessing of the position of the GNSS receiver. Instead of directly excluding the detected NLOS satellites from further estimating the position, this paper rectifies the pseudo-range measurement model by (1) correcting the pseudo-range measurements if the reflecting point of the NLOS signals is detected within the sliding window map, and (2) remodeling the uncertainty in the NLOS pseudo-range measurement using a novel weighting scheme. The performance of the proposed model was experimentally evaluated in several typical urban canyons in Hong Kong using an automobile-level GNSS receiver. Furthermore, the potential of the proposed NLOS mitigation method in GNSS and the integration of inertial navigation systems were evaluated via factor graph optimization. [ABSTRACT FROM AUTHOR]

To achieve higher throughputs in cellular networks, 3GPP proposes to use unlicensed frequency bands and develops technologies — the latest one is NR-U — allowing a cellular base station to transmit in unlicensed bands, which are already occupied by Wi-Fi networks. To enable fair channel sharing between two technologies, the base station uses a sort of CSMA/CA with binary exponential backoff similar to Wi-Fi. However, the base station can start data transmission only at strictly periodic time moments. Many papers propose sending a reservation signal between the end of the backoff procedure and such a moment to prevent nearby devices from accessing the channel. However, this approach significantly reduces Wi-Fi performance. The paper proposes a novel method CR-LBT of transmitting a reservation signal that greatly decreases channel resource waste caused by collisions and improves channel resource sharing fairness. With developed analytical models and simulations, it is shown that CR-LBT may simultaneously increase the throughput of both NR-U and Wi-Fi networks. The effect is more noticeable for the Wi-Fi network, the throughput of which may rise three times compared with the traditional method of sending the reservation signal. Finally, the influence of various factors on CR-LBT performance is studied. [ABSTRACT FROM AUTHOR]

This paper considers propagation of low-frequency broadband pulses in shallow water. It focuses on across-slope propagation in wedge-shaped oceanic waveguides and on single hydrophone receiving configurations. In a low-frequency shallow-water context, propagation is dispersive and usually described by modal theory. However, in the presence of a tilted bottom, propagation is also affected by 3-D effects (horizontal refractions). The paper shows that time-frequency analysis is a suitable tool to illustrate and understand 3-D propagation. It illustrates the pertinence of the time-frequency analysis of 3-D signal by proposing an algorithm to estimate the seabed slope using a single receiver. The method is benchmarked on numerical simulations, and successfully applied on small-scale experimental data. [ABSTRACT FROM PUBLISHER]

The state-dependent Gaussian interference channel (IC) and Z-IC are investigated, in which two receivers are corrupted by the same but differently scaled states. The state sequence is noncausally known at both transmitters, but not known at either receiver. Three interference regimes are studied, i.e., the very strong, strong, and weak regimes. In the very strong regime, the capacity region is characterized under certain channel parameters by designing a cooperative dirty paper coding between the two transmitters to fully cancel the state. In the strong regime, points on the capacity region boundary are characterized under certain channel parameters by designing an achievable scheme based on rate splitting, layered dirty paper coding, and successive state cancellation. In the weak regime, the sum capacity is obtained by independent dirty paper coding at two transmitters. For all the above regimes, the capacity achieves that of the IC/Z-IC without state. Comparison between the state-dependent regular IC and the Z-IC suggests that even with one interference-free link, the Z-IC does not necessarily perform better, because dirty paper coded interference in the regular IC facilitates to cancel the state through the cooperative dirty paper coding between the transmitters. [ABSTRACT FROM AUTHOR]

We investigate the state-dependent Gaussian wiretap channel with noncausal channel state information at the transmitter (GWTC-N-CSIT), and explore whether three strategies (i.e., taking action on the state, legitimate receiver’s channel output feedback, and combining the former two strategies together) help to enhance the secrecy capacity of the GWTC-N-CSIT. To be specific, we first determine the secrecy capacity of the GWTC-N-CSIT with noiseless feedback. Next, we derive lower and upper bounds on the secrecy capacity of the GWTC-N-CSIT with action-dependent state. Finally, we derive lower and upper bounds on the secrecy capacity of the GWTC-N-CSIT with both action-dependent state and noiseless feedback, and show that these bounds meet for a special case. Numerical results of this paper indicate that all three strategies enhance the secrecy capacity of the GWTC-N-CSIT. The study of this paper offers new options for enhancing the secrecy rates of the state-dependent wiretap channel models. [ABSTRACT FROM AUTHOR]

This paper describes a method of finding a constrained optimum excitation of a generic transmitting antenna subarray. Constraint of a maximum power coupled from the transmitting to the receiving subarray is discussed. Optimum realized gain, optimum gain, and optimum directivity goals are covered. The proposed method can operate on any generic multi-port antenna, with no assumptions taken on the geometry, the constituent elements construction, or the interelement coupling. This paper in particular investigates dense linear arrays and analyses the applicability of several typical transmitter/receiver partitionings to the proposed method. Achieving a below −30 dB TX-to-RX total coupling with less than 1 dB realized gain penalty over a 135° scanning angle is demonstrated for below-half-wavelength spaced 73 GHz $E$ -band PCB-based linear arrays. [ABSTRACT FROM AUTHOR]

A hybrid communication network with a common analog source signal and independent digital data streams at the transmitters of a multiple access network is considered. The receiver has to estimate the analog signal samples with a given fidelity, and decode the digital streams with a low error probability. The main goal of this paper is to characterize the optimal tradeoff between the mean-squared error distortion in source estimation and the data rates available to each user. To this end, we consider a Gaussian multiple access channel (GMAC) setup with additive state, where the state is nothing but a scaled version of the source process itself. The state process is assumed to be non-causally available to all the transmitting nodes. The problem now becomes that of the joint state estimation and message communication in a GMAC with state. We provide a complete characterization of the optimal distortion-rate tradeoff for an $N$ —sender GMAC. Our results show that, similar to the single-user results, it is optimal to amplify the state using uncoded transmissions, whereas the digital streams are superposed using appropriate Gaussian codebooks in conjunction with dirty paper coding (DPC). Since the variance of the additive state is controlled by a scaling factor in our model, we also recover the results for communicating a common source and independent messages over a GMAC without state as a special case. [ABSTRACT FROM AUTHOR]

This correspondence paper studies how correlation of the wiretap channel affects the secrecy rate of the artificial noise (AN) scheme. To this end, we first develop a simple but tight lower bound on the ergodic secrecy rate of the AN scheme on correlated multiple-input single-output wiretap channels. Then, utilizing the derived bound, we investigate the influence of correlation on the secrecy rate, which explicitly manifests how the channel correlation affects the optimal power allocation. Ultimately, this paper answers two fundamental questions: when is the AN signal beneficial? and how much power should be allocated for the AN signal to achieve a higher ergodic secrecy rate? in terms of channel correlation. [ABSTRACT FROM AUTHOR]

This paper explores the dynamic properties of oscillating and propagating patterns in concentration of the information molecule and proposes a new modulation scheme for molecular communication. In the proposed modulation scheme, information molecules transmitted from a sender bio-nanomachine propagate in the environment, chemically react with the molecules in the environment, change their concentration, and form an oscillating and propagating pattern in the environment. A sender bio-nanomachine modulates information onto the dynamic properties of the pattern, such as the amount of change in concentration of the information molecule and the time duration of one cycle of a periodic pattern in concentration of the information molecule. Receiver bio-nanomachines receive the oscillating and propagating pattern that the sender bio-nanomachine generates and detect its dynamic properties to demodulate information. This paper implements the proposed modulation scheme using Ca2+ oscillation and propagation, a communication mechanism found in biological cells. It also demonstrates that the proposed modulation scheme allows information to be simultaneously modulated onto multiple dynamic properties of an oscillating and propagating pattern that a sender bio-nanomachine generates. The main contributions of this paper are to open a new research area of modulation schemes in molecular communication and to illustrate the possibility that biological cells use such modulation schemes for cell-to-cell communication. [ABSTRACT FROM PUBLISHER]

Emerging applications involving device-to-device communication among wearable electronics require gigabits per second throughput, which can be achieved by utilizing millimeter-wave (mmWave) frequency bands. When many such communicating devices are indoors in close proximity, such as in a train, car, or airplane cabin, interference can be a serious impairment. This paper uses stochastic geometry to analyze the performance of mmWave networks with a finite number of interferers in a finite network region. Prior work considered either lower carrier frequencies with different antenna and channel assumptions, or a network with an infinite spatial extent. In this paper, human users not only carry potentially interfering devices, but also act to block interfering signals. Using a sequence of simplifying assumptions, accurate expressions for coverage and rate are developed that capture the effects of key antenna characteristics, such as directivity and gain, and are a function of the finite area and number of users. The assumptions are validated through a combination of analysis and simulation. The main conclusions are that mmWave frequencies can provide gigabits per second throughput even with omni-directional transceiver antennas, and larger, more directive antenna arrays give better system performance. [ABSTRACT FROM PUBLISHER]

Angle-based localization of a source at unique coordinates in the three-dimensional (3-D) space utilizes traditionally the two-dimensional (2-D) angle of arrival (AOA) measurements from planar arrays. This paper investigates the positioning performance and develops an optimal solution for the 3-D localization using one-dimensional (1-D) space angle (SA) measurements that has the appeal of involving linear arrays only. The localization performance by SA is less understood and the positioning algorithms from the literature are suboptimal and have restrictions on the altitudes and orientations of the linear array receivers. This paper establishes the basic concept of using SA for localization, and conducts analytical comparison of SA and AOA positionings by cross arrays, where the contrasts in the angle observation accuracy, the geometric dilution effect and overall localization performance are elaborated. A solution that can reach the Cramér-Rao Lower Bound performance under Gaussian noise is also proposed that does not have restriction on the placement of the linear array receivers. It consists of an initial solution by semidefinite relaxation and a refined solution by an algebraic estimator. Simulations validate the theoretical investigation and the algorithm performance. [ABSTRACT FROM AUTHOR]

In this paper, we investigate covert communication over millimeter-wave (mmWave) frequencies. In particular, a mmWave transmitter, referred to as Alice, attempts to reliably communicate to a receiver, referred to as Bob, while hiding the existence of communication from a warden, referred to as Willie. In this regard, operating over the mmWave bands not only increases the covertness thanks to directional beams, but also increases the transmission data rates given much more available bandwidths and enables ultra-low form factor transceivers due to the lower wavelengths used compared to the conventional radio frequency (RF) counterpart. We first assume that the transmitter Alice employs two independent antenna arrays in which one of the arrays is to form a directive beam for data transmission to Bob. The other antenna array is used by Alice to generate another beam toward Willie as a jamming signal while changing the transmit power independently across the transmission blocks in order to achieve the desired covertness. For this dual-beam setup, we characterize Willie’s detection error rate with the optimal detector and the closed-form of its expected value from Alice’s perspective. We then derive the closed-form expression for the outage probability of the Alice-Bob link, which enables characterizing the optimal covert rate that can be achieved using the proposed setup. We further obtain tractable forms for the ergodic capacity of the Alice-Bob link involving only one-dimensional integrals that can be computed in closed forms for most ranges of the channel parameters. Finally, we highlight how the results can be extended to more practical scenarios, particularly to the cases where perfect information about the location of the passive warden is not available. Our results demonstrate the advantages of covert mmWave communication compared to the RF counterpart. The research in this paper is the first analytical attempt in exploring covert communication using mmWave systems. [ABSTRACT FROM AUTHOR]

Scatter radio, i.e., communication by means of reflection, has been recently proposed as a viable ultra-low power solution for wireless sensor networks (WSNs). This paper offers a detailed comparison between monostatic and multistatic scatter radio architectures. In monostatic architecture, the reader consists of both the illuminating transmitter and the receiver of signals scattered back from the sensors. The multistatic architecture includes several ultra-low cost illuminating carrier emitters and a single reader. Maximum-likelihood coherent and noncoherent bit error rate (BER), diversity order, average information, and energy outage probability comparison is performed, under dyadic Nakagami fading and filling a gap in the literature. It is found that: 1) diversity order, BER, and tag location-independent performance bounds of multistatic architecture outperform monostatic; 2) energy outage due to radio frequency (RF) harvesting for passive tags, is less frequent in multistatic than monostatic architecture; and 3) multistatic coverage is higher than monostatic. Furthermore, a proof-of-concept digital multistatic scatter radio WSN with a single receiver, four low-cost emitters, and multiple ambiently-powered low-bitrate tags, perhaps the first of its kind, is experimentally demonstrated (at 13 dBm transmission power), covering an area of 3500 m2. Research findings are applicable in the industries of WSNs, RF identification, and emerging Internet-of-Things. [ABSTRACT FROM AUTHOR]

This paper has the following ambitious goal: to convince the reader that content caching is an exciting research topic for the future communication systems and networks. Caching has been studied for more than 40 years, and has recently received increased attention from industry and academia. Novel caching techniques promise to push the network performance to unprecedented limits, but also pose significant technical challenges. This tutorial provides a brief overview of existing caching solutions, discusses seminal papers that open new directions in caching, and presents the contributions of this special issue. We analyze the challenges that caching needs to address today, also considering an industry perspective, and identify bottleneck issues that must be resolved to unleash the full potential of this promising technique. [ABSTRACT FROM AUTHOR]

Non-uniform constellation (NUC) is an advanced technology in digital terrestrial television broadcasting (DTTB) systems to reduce the shapping gap of BICM capacity to Shannon theoretical limit and provide performance gain. Two-dimensional NUC (2D-NUC) is a kind of NUC providing more gain but bringing higher demapping complexity at the receiver, which hinders its application prospects, especially in power limited systems. This paper proposes three novel demapping algorithms with reduced complexity for low to medium code rate 2D-NUCs in Advanced Television Systems Committee 3rd Generation (ATSC 3.0) standard. The proposed algorithms are based on the introduction of virtual points, the strategy of condensed symbols reduction and some reasonable approximations. There is a trade-off between the demapping complexity and performance. These three algorithms have different degrees of reduction in complexity and performance degradation, so they accommodate for different practical requirements. Theoretical analysis and simulation results are also given in this paper to prove the efficiency of the proposed demapping algorithms with reduced complexity. [ABSTRACT FROM AUTHOR]

Satellite-to-earth links are subject to several propagation effects in the troposphere, being rain attenuation the impairment that can cause the deepest fades. In this paper, the duration of both fades and the intervals between consecutive fades (interfade intervals) are characterized on the basis of the results of a long-term slant-path Ka-band propagation experiment carried out in Madrid, Spain. The experimental and statistical results included in this paper correspond to seven complete years of measurements, a period large enough to characterize not only the average-year statistics of fade dynamics but also their variability, which is assessed on the basis of annual statistics of durations. The obtained average-year statistics of fade durations are in many cases close to the predictions made by the International Telecommunication Union-Radiocommunications and Communications Research Center Canada models, although the predictions could be improved with a better selection of the parameters of the distributions used in the models. Interfade duration statistics are also presented and related to recent modeling efforts. The interannual variability of statistics, such as the relative number of fades, is quantified and found to be low, except for the higher attenuation thresholds or the highest durations considered in this paper. [ABSTRACT FROM PUBLISHER]

Self-tracking receivers have been suggested for satellite and mobile communication applications. In this paper, we propose and demonstrate an array receiver (Rx) architecture based on phase-locked loops. The system is capable of automatically tracking a moving source and providing direction-of-arrival (DOA) estimates calculated from array signal phase differences. After deriving the system transfer functions, we show a digital implementation of the receiver and experimentally prove its phase detection capability. In combination with an eight-element linear array and analog front ends, we build a hybrid receiver and demonstrate its DOA estimation performance in static and dynamic outdoor setups. This paper gives the details about theoretic principles, implementation concept, and realization of the proposed receiver. We demonstrate DOA errors below 4° and show the reproducibility of the results. Using dynamic experiments, we verify the tracking ability of the system, which makes it applicable to retrodirective antennas. [ABSTRACT FROM PUBLISHER]

Modern intelligent transport solutions can achieve an improvement of traffic flow on motorways. With lane-specific measurements and lane-specific control, more measures are possible. Single frequency precise point positioning (PPP) is a newly developed and affordable technique to achieve an improved position accuracy compared with global positioning system (GPS) standalone positioning. GPS-PPP allows for sub-meter accurate positioning, in real time, of vehicles on a motorway. This paper tests this technique in real life; moreover, it presents a methodology to map the lanes on a motorway using data collected by this technique. The methodology exploits the high accuracy and the fact that the most driving is within a lane. In a field test, a GPS-PPP equipped vehicle drives a specific motorway stretch 100 times, for which the GPS-PPP trajectory data are collected. Using these data, the positions and the widths of different lanes are successfully estimated. Comparison with the ground truth shows a dm accuracy. With the parametrized lanes, vehicles can be tracked down to a lane with the GPS-PPP device. [ABSTRACT FROM PUBLISHER]

This paper proposes a new paradigm for spectrum sharing between cellular wireless communications (CWC) and radio astronomy systems (RAS). In contrast to the existing paradigm of geographical and spectral isolation between CWC and RAS, this paper develops a three phase spectrum access, which enables geographical and spectral coexistence between CWC and RAS. Shared spectrum access zone (SSAZ) is created around the RAS site and CWC cells within the SSAZ follow the three phase spectrum access scheme while those outside the SSAZ have full spectrum access. In addition, system characteristics-based improved spectrum sharing is developed. Furthermore, a built-in fine tuning mechanism is presented for addressing mismatches between design and practical environments as well as for facilitating service evolutions. Performance evaluation results demonstrate that the proposed paradigm offers 1) certain guaranteed spectrum access to RAS, which is impossible in the existing paradigm, 2) capability to handle higher peak and mean traffics to CWC under spectrum restructuring of both CWC and RAS bands, and 3) overall improved spectrum utilization. [ABSTRACT FROM AUTHOR]

E-healthcare as a significant facet of the Internet of Things (IoT) relies on wearable devices to continuously monitor users’ vital signals for health-related purposes. The sensitive and vast nature of the collected data necessitate secure encryption and storage on the cloud. Simultaneously, there is a need to share these data for healthcare purposes. How to balance the privacy and usability of these data is a challenging problem in the e-healthcare applications. A central problem arose from the continuous data collection is how to effectively share the data collected in one specific time period when users are unwell. We formalize it as the sequential data sharing problem. This problem appears in various IoT applications apart from e-healthcare, such as video surveillance. In this paper, we explain why all existing solutions cannot address the above problem. Then, we propose a novel sequential data sharing system (SDSS), where the data encrypted at any specific time period can be efficiently shared. We first present a practical construction of SDSS that supports securely sharing data within one specific time period in a symmetric manner. The decryption key are retrieved sequentially by utilizing the shared key and hash function. All involved calculations in the system are lightweight. Data pertaining to other non-selected time periods remain unknown. We then extend the SDSS to a multiple-range version, enabling simultaneous sharing data for multiple specific time periods, and show an example. We formalize the definition of security models and analyze the security of our systems. Finally, we evaluate the performance of our systems using SHA-256 and AES-256. Experimental results demonstrate that our systems are highly efficient. It takes less than 1 millisecond to encrypt 100KB data and less than 0.4 milliseconds to decrypt the corresponding cipher data. Our proposed systems provide a solution to balance the privacy and usability in the context of sequentially collected data. We believe that this work will enhance the adoption and practicality of IoT applications. [ABSTRACT FROM AUTHOR]

Non-orthogonal multiple access (NOMA) is a well-accepted technology for future Wi-Fi systems to improve spectral efficiency. NOMA allows an access point (AP) to simultaneously serve multiple devices by splitting the transmit power between them. Using the superposition coding the AP combines signals of different frames with predefined power weights. However, as it is already known, the phase noise caused by hardware imperfections limits the performance of NOMA transmissions. The paper proposes a practical, easy-to-implement, and backward-compatible method to rotate the constellation of the low power signal in order to make it more robust to the phase noise. A mathematical model is developed to find such a rotation angle that minimizes the bit error rate (BER) of the low power frame. A new NOMA Wi-Fi prototype testbed is developed with the new feature of constellation rotation ability, which is used to validate the performance of our proposed method. Many experimental results show the proposed constellation rotation approach significantly decreases the BER in high signal-to-noise scenarios. [ABSTRACT FROM AUTHOR]

With the rapid growth of the number of flights, the traditional radar system has been unable to meet the needs of flight supervision. At the same time, it also puts forward higher requirements for air traffic management (ATM). Automatic dependent surveillance-broadcast (ADS-B) is a promising technology in the next generation of air traffic control (ATC). However, the openness of ADS-B system brings the opportunities for terrorists to tamper with data. In this paper, we propose a novel aircraft coordinate prediction hybrid model based on deep learning. The proposed model combines inception modules and long short-term memory (LSTM) modules. Inception modules are used to extract the spatial features of dataset, and LSTM modules are used to extract the temporal features of dataset. In addition, we use the ADS-B signal strength instead of its specific information to obtain aircraft coordinates. Signal strength is not easily tampered with, but it carries limited information. Therefore, this scheme sacrifices a certain precision for reliability. Inception modules and LSTM modules are combined in different ways to perform experiments on the real-world ADS-B datasets from OpenSky network. The experimental results show that the proposed 2-Inception-LSTM is the local optimal model. The prediction error is within 10 km. It can be suitable for situations where the positioning accuracy of aircraft coordinates is not pursued, but the positioning reliability must be guaranteed. [ABSTRACT FROM AUTHOR]

The performance of the recently proposed orientational beamforming (OBF) system for ultra-wideband (UWB) signals degrades seriously in multiuser situation. Although various techniques have been proposed in the literature to suppress multiuser interference in the time-hopping UWB system, there has been no research on interference suppression in the OBF UWB system. In this paper, we propose a nonlinear OBF system via a modified radial basis function (RBF) neural network, named the RBF-OBF system, to reject orientational UWB interferences caused by multiuser transmission in the OBF system. The RBF neural network is selected mainly because of its simple structure, convenient training process, and fast convergence speed. However, the conventional Euclidean-distance-based RBF neural network is not suitable for the training process used in this work, as the training samples are noiseless orientational steering vectors in frequency domain. Therefore, a modified RBF neural network is proposed in this paper, which evaluates the similarity between an input vector and the center vector of a hidden layer neuron by their signed complex correlation coefficient. Numerous simulations demonstrate that compared to the conventional OBF system, the proposed RBF-OBF system can significantly reduce the bit error rates (BERs) under different noise and interference situations. The BER reduction rate of the proposed RBF-OBF system is higher than 92% in additive white Gaussian noise channel and higher than 89% in line-of-sight multipath channel. [ABSTRACT FROM AUTHOR]

This paper explores the blind decoding of control channels for obtaining other user identities in 3GPP specification, such as high-speed packet access and long-term evolution. The reliable decoding of control channels with user identities is crucial to mitigate inter-cell interference as well as multi-user interference. This paper exploits a method of user identity filtering followed by a method of user identity detection based on the traffic persistency, which is common to all standards. Hence, the proposed methods are applicable to all the standards regulated by 3GPP specification. In particular, this paper analyzes the proposed other user identity detection algorithm under the random coding. Simulation results show that the proposed method is reliable even at low SNRs and is also aligned with the analysis. [ABSTRACT FROM AUTHOR]