Search

In the conventional sliding mode control, the four-leg distribution static compensator (DSTATCOM) currents are controlled based on a current error in each phase. However, the four currents in a four-wire system can not be independently controlled variables and hence one of the four controllers is redundant in conventional schemes. Further, the current dynamics of a DSTATCOM converter are coupled through converter pole voltages in the natural reference frame. This leads to cross-coupling in the sliding variable equations with respect to four manipulated input variables. Considering the above points, in this paper, the current due to Thevenin’s equivalent load neutral-point voltage is considered as a fourth independent controlled variable and the corresponding system dynamic equations are presented. To get a decoupled feature, a new sliding surface function is structured. The performance of a DSTATCOM with the proposed control scheme under various operating conditions is validated through a detailed simulation study and experimental results, obtained from a laboratory prototype of four-leg DSTATCOM. [ABSTRACT FROM AUTHOR]

This paper deals with the protection of critical loads from voltage-related power quality issues using a dynamic voltage restorer (DVR). A generalized control algorithm based on instantaneous space phasor and dual $P$ - $Q$ theory has been proposed to generate the instantaneous reference voltages to compensate the load voltages with direct power flow control. The proposed algorithm adapts energy-optimized series voltage compensation, which results in a reduction of energy storage requirement. The proposed DVR control scheme can support the load from voltage-related power quality issues irrespective of the load current profile. Each leg of the three-phase three-leg split capacitor inverter is used to inject series compensation voltage in respective phases of the system. Model-based computer simulation studies and real-time experimental results validate the effectiveness of the proposed control algorithm. [ABSTRACT FROM AUTHOR]

A distribution static compensator (DSTATCOM) is used for load voltage regulation, and its performance mainly depends upon the feeder impedance and its nature (resistive, inductive, stiff, nonstiff). However, a study for analyzing voltage regulation performance of DSTATCOM depending upon network parameters is not well defined. This paper aims to provide a comprehensive study of design, operation, and flexible control of a DSTATCOM operating in voltage control mode. A detailed analysis of the voltage regulation capability of DSTATCOM under various feeder impedances is presented. Then, a benchmark design procedure to compute the value of external inductor is presented. A dynamic reference load voltage generation scheme is also developed, which allows DSTATCOM to compensate load reactive power during normal operation, in addition to providing voltage support during disturbances. Simulation and experimental results validate the effectiveness of the proposed scheme. [ABSTRACT FROM PUBLISHER]

In this paper, a unified energy management scheme is proposed for renewable grid integrated systems with battery–supercapacitor hybrid storage. The intermittent nature of renewable-energy resources (RES), coupled with the unpredictable changes in the load, demands high-power and high-energy-density storage systems to coexist in today's microgrid environment. The proposed scheme dynamically changes the modes of renewable integrated systems based on the availability of RES power and changes in load as well. The participation of battery–supercapacitor storage to handle sudden/average changes in power surges results in fast dc link voltage regulation, effective energy management, and reduced current stress on battery. In addition, the proposed energy management scheme enables the real power transfer along with ancillary services such as current harmonic mitigation, reactive power support, and power factor improvement at the point of common coupling. The proposed scheme is validated through both simulation and experimental studies. [ABSTRACT FROM PUBLISHER]

This paper proposes an improved performance interactive distribution static compensator (DSTATCOM) to address the limitations of conventional current control mode (CCM) and voltage control mode (VCM) operations. The proposed interactive scheme provides smooth transfer of modes of operation while remaining connected in the distribution system. In normal operation, the DSTATCOM operates in CCM to make source currents balanced, sinusoidal, and at a unity power factor. During voltage disturbances, the CCM operation cannot improve load voltage. In that case, DSTATCOM operation is changed to VCM, which maintains a constant voltage across the sensitive loads. Hence, this interactive DSTATCOM ensures continuous, flexible, and robust operation of the load. Moreover, the filter current requirements are reduced in the proposed scheme, which reduces the losses in the filter and feeder, improves inverter efficiency, and requires a reduced-rating inverter for sag mitigation. The principle of operation and control for both operating modes is analyzed. The detailed process of the flexible transfer between the two modes is derived. Deadbeat predictive control algorithms for CCM as well as VCM operation are developed for fast operation during mode transfers. The performance of the proposed scheme is validated by both simulation and experimental results. [ABSTRACT FROM PUBLISHER]

This paper presents a predictive voltage control scheme for the effective control of a transformerless dynamic voltage restorer (TDVR). This control scheme utilizes the discrete model of a voltage source inverter and an interfacing filter for the generation of the switching strategy of inverter switches. Predictive voltage control algorithm-based TDVR tracks the reference voltage effectively and maintains load voltages sinusoidal during various voltage disturbances as well as load conditions. Moreover, this scheme does not require any linear controller or modulation technique. Simulation and experimental results are presented to verify the performance of the proposed scheme. [ABSTRACT FROM PUBLISHER]

In this paper, fast acting dc-link voltage-based energy management schemes are proposed for a hybrid energy storage system fed by solar photovoltaic (PV) energy. Using the proposed control schemes, quick fluctuations of load are supplied by the supercapacitors and the average load demand is controlled by the batteries. Fast dc-link voltage, effective energy management, and reduced current stress on battery are the main features achieved from the proposed control schemes. The effectiveness of the proposed control schemes are compared with the unified cascaded control. Small-signal control gains are formulated to design the voltage and current loops of the proposed energy management schemes. Detailed stability analysis is also presented to find the boundary values of compensator gains. In addition, a high-gain PV converter is proposed for extraction of maximum power from the solar panels. High voltage gain, reduced reverse recovery of diodes, and less duty cycle operation are the key features obtained from the proposed high-gain converter. The validity of the proposed energy management schemes with high-gain converter is verified by the detailed simulation and experimental studies. [ABSTRACT FROM AUTHOR]

Dynamic voltage restorer (DVR) is a definitive solution toward compensation of voltage sag with phase jump. Conventional DVR topologies, however, have dc links and two-stage power conversions. This increases its size, cost, and associated losses. Therefore, topologies without the dc link, mitigating sag by utilizing direct ac–ac converters, are preferable over the conventional ones. As no storage device is employed, compensation by these topologies is limited only by the voltages at the point of common coupling that is feeding the converters. In this paper, a direct-ac–ac-converter-based topology fed with line voltages is proposed. The arrangement provides increased range of compensation in terms of magnitude and phase angle correction. Detailed simulations have been carried out in MATLAB to compare the capability of the proposed topology with other similar topologies. Experimental results are presented to validate the capability of the topology to compensate various sags. [ABSTRACT FROM PUBLISHER]

Loads connected to a stiff source cannot be protected from voltage disturbances using a distribution static compensator (DSTATCOM). In this paper, a new control-algorithm-based multifunctional DSTATCOM is proposed to operate in voltage control mode under stiff source. This scheme provides fast voltage regulation at the load terminal during voltage disturbances and protects critical loads. In addition, during normal operation, the generated reference load voltages allow control of the source currents. Consequently, DSTATCOM injects reactive and harmonic components of load currents to make source power factor unity. Simulation and experimental results are presented to verify the efficacy of the proposed control algorithm and multifunctional DSTATCOM. [ABSTRACT FROM PUBLISHER]