Search

Power losses of switches and inductors are consistent challenges that hinder the development of high-frequency power supply in package (PSiP). This paper investigates the roadmap for power loss optimizations of switches and inductors in high-frequency PSiPs. Firstly, a size and parallel quantity design method to reduce power loss in an integrated Si LDMOSFET is provided with comprehensive consideration of switching frequency and power levels. Secondly, quality factors of different air-core inductors are analyzed with consideration of geometric parameters and skin effect, which provides the winding structure optimization to reduce power losses. The power losses of the integrated Si LDMOSFET and air-core inductors are both reduced to less than 10% of the output power at 1~100 MHz switching frequency and 0.1~10 W power level. Finally, based on the above optimizations, power losses of switches and inductors are calculated with switching frequency and power level. Combining the calculated results, this paper predicts the efficiency boundaries of PSiPs. Upon efficiency normalization with consideration of input and output voltage levels, all the predictions are consistent with the published literature. The efficiency predication error is 1~15% at 1~100 MHz switching frequency and 0.1~10 W power level. The above power loss optimizations improve the efficiency, which provides potential roadmaps for achieving high-frequency PSiPs. [ABSTRACT FROM AUTHOR]

Featured Application: This paper proposes virtual admittance feedforward compensation and phase correction for average-current-mode-controlled totem-pole PFC converters. It can effectively reduce total harmonic distortion (THD) and improve the power factor (PF) of the converter. The proposed control strategy can be directly used in on-board chargers (OBCs) for electric vehicles, power supplies for server clusters, communication equipment, industrial equipment, etc. This paper explores a current distortion problem in totem-pole bridgeless power factor correction (PFC) converters with average current mode (ACM) control. With in-depth modeling for the current and voltage loops, it was found that the current distortion is caused by the limited current loop bandwidth and input filter capacitor. These factors lead to the presence of a susceptance component in the input admittance, which degrades the power factor (PF) and total harmonic distortion (THD) of the PFC converter. To solve this problem, this paper proposes virtual admittance feedforward compensation (VAFC) and phase correction methods to adjust the input admittance to pure conductance. The VAFC can generate virtual admittance that compensates for susceptance components in the input admittance, while phase correction can generate an equivalent current source that offsets the current in input capacitors. Furthermore, a phase lock loop (PLL) is introduced to realize the VAFC, which reduces the feedforward interference caused by input voltage sampling noise. Finally, an experimental prototype was built to verify the effectiveness of the proposed strategies. According to the test results, the proposed compensation strategy improves the PF by 1.23%, while reducing the THD by 2.52% and achieving a peak efficiency of 98.69%. [ABSTRACT FROM AUTHOR]

Achieving low-cost and high-performance network security communication is necessary for Internet of Things (IoT) devices, including intelligent sensors and mobile robots. Designing hardware accelerators to accelerate multiple computationally intensive cryptographic primitives in various network security protocols is challenging. Different from existing unified reconfigurable cryptographic accelerators with relatively low efficiency and high latency, this paper presents design and analysis of a reconfigurable cryptographic accelerator consisting of a reconfigurable cipher unit and a reconfigurable hash unit to support widely used cryptographic algorithms for IoT Devices, which require block ciphers and hash functions simultaneously. Based on a detailed and comprehensive algorithmic analysis of both the block ciphers and hash functions in terms of basic algorithm structures and common cryptographic operators, the proposed reconfigurable cryptographic accelerator is designed by reusing key register files and operators to build unified data paths. Both the reconfigurable cipher unit and the reconfigurable hash unit contain a unified data path to implement Data Encryption Standard (DES)/Advanced Encryption Standard (AES)/ShangMi 4 (SM4) and Secure Hash Algorithm-1 (SHA-1)/SHA-256/SM3 algorithms, respectively. A reconfigurable S-Box for AES and SM4 is designed based on the composite field Galois field (GF) GF(((22)2)2), which significantly reduces hardware overhead and power consumption compared with the conventional implementation by look-up tables. The experimental results based on 65-nm application-specific integrated circuit (ASIC) implementation show that the achieved energy efficiency and area efficiency of the proposed design is 441 Gbps/W and 37.55 Gbps/mm2, respectively, which is suitable for IoT devices with limited battery and form factor. The result of delay analysis also shows that the number of delay cycles of our design can be reduced by 83% compared with the state-of-the-art design, which shows that the proposed design is more suitable for applications including 5G/Wi-Fi/ZigBee/Ethernet network standards to accelerate block ciphers and hash functions simultaneously. [ABSTRACT FROM AUTHOR]

Simultaneous localization and mapping (SLAM) is the major solution for constructing or updating a map of an unknown environment while simultaneously keeping track of a mobile robot's location. Correlative Scan Matching (CSM) is a scan matching algorithm for obtaining the posterior distribution probability for the robot's pose in SLAM. This paper combines the non-linear optimization algorithm and CSM algorithm into an NLO-CSM (Non-linear Optimization CSM) algorithm for reducing the computation resources and the amount of computation while ensuring high calculation accuracy, and it presents an efficient hardware accelerator design of the NLO-CSM algorithm for the scan matching in 2D LiDAR SLAM. The proposed NLO-CSM hardware accelerator utilizes pipeline processing and module reusing techniques to achieve low hardware overhead, fast matching, and high energy efficiency. FPGA implementation results show that, at 100 MHz clock, the power consumption of the proposed hardware accelerator is as low as 0.79 W, while it performs a scan match at 8.98 ms and 7.15 mJ per frame. The proposed design outperforms the ARM-A9 dual-core CPU implementation with a 92.74% increase and 90.71% saving in computing speed and energy consumption, respectively. It has also achieved 80.3% LUTs, 84.13% FFs, and 20.83% DSPs saving, as well as an 8.17× increase in frame rate and 96.22% improvement in energy efficiency over a state-of-the-art hardware accelerator design in the literature. ASIC implementation in 65 nm can further reduce the computing time and energy consumption per scan to 5.94 ms and 0.06 mJ, respectively, which shows that the proposed NLO-CSM hardware accelerator design is suitable for resource-limited and energy-constrained mobile and micro robot applications. [ABSTRACT FROM AUTHOR]