Search

This paper presents a compact multifunctional reconfigurable filter based on double coupled‐line structures with three different filtering modes. Three different working modes of the wideband bandpass filter (BPF), bandstop filter (BSF) and wideband filter with single notch can be switched. One prototype of the reconfigurable filter is constructed and measured. For the wideband BPF mode, the 3‐dB bandwidth is 84.5%with in‐band return loss (RL) higher than 21.5 dB and minimum insertion losses (IL) of 0.9 dB, and rejections for the upper stopband is higher than 22.5 dB. For the wideband filter with single notch mode, the 3‐dB bandwidth is 39.7% and 24.9%, with the minimum in‐band IL of 1.13 dB and 1.5 dB, respectively. The maximum rejections between the two bands are 32 dB, and the upper stop band rejections are higher than 19 dB. For the BSF mode, the 3‐dB bandwidth is 29.6%. [ABSTRACT FROM AUTHOR]

In this paper, a new kind of absorptive bandstop filter composing three series‐coupled lines is designed, investigated, and fabricated. The proposed circuit is indeed a combination of a dual‐band conventional notch filter and a single‐band absorptive filter generating two conventional and an absorptive notch. More precisely, the circuit introduces a fixed absorptive notch at 4.22 GHz and two electronically tunable (approximately 20%) conventional notches at 1.62–2 and 4.71–5.75 GHz, respectively. Besides, the FBWs of the first conventional notch, the second one, and the absorptive notch are 5.5 ± 1, 3.5 ± 1, and 3 ± 1%, respectively. The instantaneous surface current density of the circuit is depicted to investigate the generation of notches. The circuit has a compact size of 44.7 × 11.85 mm2 equaling to 0.489 × 0.129 λg2; moreover, it can successfully absorb more than 98% of the input power at its absorptive notch. [ABSTRACT FROM AUTHOR]

Design procedure of a novel transmission line low‐pass filter is presented. The filter has a flexible rejection response for a prescribed cut‐off frequency and an in‐band ripple factor. It is compact by using a Z‐shaped coupled‐line section, which is loaded with open‐circuited stubs. All of the transmission line elements are identical in electrical length, and the impedances can be calculated by solving certain specific equations according to prescribed in‐band specifications. The simulated results show that the circuit can generate low‐pass responses with third‐, fifth‐, and seventh‐order filtering functions. The filter order depends on the number and position of the loading stubs. For verification, two sample filters with cut‐off frequency of 0.5/0.3 GHz are fabricated using a three‐/five‐layer PCB process, which generate seventh‐order low‐pass filtering responses with good selectivity. The experimental results agree well with the predictions. [ABSTRACT FROM AUTHOR]