Search

The total/partial oil change treatment can affect the furfural partitioning in oil-paper-pressboard insulation, resulting in poor accuracy of furfural analysis. Moreover, due to the high cost of total oil change, partial oil change is more practical during transformer operation. This paper investigates the furfural partitioning in the oil-paper-pressboard insulation under partial oil change conditions. First, the initial furfural partitioning equation with non-oil change is proposed based on the obtained furfural content in oil, paper, and pressboard. Then, the modified furfural partitioning model under partial oil change condition is established by introducing a correction factor. Moreover, a preliminary correction scheme for the furfural partitioning model considering the influence of moisture and acid is provided. Finally, furfural content in oil-Kraft paper and oil-thermally upgraded Kraft (TUK) paper insulation are discussed, and results indicate that the proposed modified furfural partitioning model is not suitable for the oil-TUK paper insulation. This work can provide theoretical support for furfural analysis of oil-immersed transformers. [ABSTRACT FROM AUTHOR]

This paper presents a modeling practical works project of electrical engineering, proposed to the first-year students of the University Institute of Technology in France, during the COVID-19 pandemic. The objective of this paper is twofold. The first objective is to present to the students the opportunities of modeling and calculation development of a spreadsheet software in their professional lives. The second objective is to create a file that automatically calculates all the current and voltage values at each point of any alternative electrical circuit. The aim of this paper, geared toward students, is to bring them to build their own numerical remote lab, autonomously. Therefore, pedagogical keys are given along the reading of this document to help them to progress, both on electrical circuits conceptual understanding with series and parallel RLC circuits and on their computation in a spreadsheet software. As a conclusion, this paper can be used as a base to develop remote modeling practical works of many and different devices, as well as a database starting point of such analytical models. [ABSTRACT FROM AUTHOR]

Transformer oil and insulation paper are subject to the combined effects of the electric field and temperature operations, which significantly impact insulation deterioration. This article designs a comparative test of the electro-thermal combined aging to obtain several characteristic parameters for the aging degree of oil-pressboard insulation. Molecular dynamics are used to establish a mixed molecular model of oil-pressboard insulation to simulate the pyrolysis reactions at high temperatures using the ReaxFF force field. The microscopic effects of the electric field on the aging of oil-pressboard insulation are studied. The rationale of the simulation model is verified from experimental results, and the trend of the reactants and products in the reaction process was considered to determine the influence mechanism of electric–thermal coupling on oil-pressboard insulation. The experimental results show that thermal stress remains the most important factor toward cracking in insulation paper. The acid value and furfural formation rate in oil increase, and the polymerization degree of the insulation paper decreases rapidly after the combined electric and thermal aging. In addition, the molecular dynamics simulations show that pyrolysis increases the bond energy, promotes repulsion between atoms, and leads to fractured bonds. The addition of the electric field increases the susceptibility of the chemical bonds in cellulose molecules to breakage. The morphology of the cellulose chain then changes, and the diffusion of small molecules intensifies. This study reveals the mechanism of insulation aging under electro-thermal coupling through combined macroscopic testing and molecular dynamics simulations. [ABSTRACT FROM AUTHOR]

Enhancing power electronics (PE) converter reliability is crucial for ensuring a reliable operation of current and future operating Wind Turbines (WTs). Achieving high reliability of variable speed WT PE systems requires careful consideration of their operation, and particularly their thermal cycling. This paper presents a methodology for evaluating and reconsidering operational strategies of WTs with relation to the thermal loading and lifetime consumption of the converter. The methodology is applied to compare control strategies for the WT generator and evaluate their impact on the converter reliability by observation of the thermal cycles and by calculating the resultant lifetime consumption of those stress cycles. The thermal stress on both the Machine Side Converter (MSC) and the Grid Side Converter (GSC) is examined and compared. It is shown that the least reliable of the three evaluated control strategies is the one that tracks the power curve below rated speed most closely. This paper suggests that dynamic transients associated with the WT control largely influence the IGBT module wear-out and their modelling needs to be prioritized for lifetime studies. These dynamic transients are captured by the improved model whose value is confirmed for the comparisons in the case study of the paper. [ABSTRACT FROM AUTHOR]

Cross-laminated timber (CLT) buildings are constructed by connecting CLT panels with dowel-type fasteners and mechanical anchors, which govern the lateral behavior of these structures. Although these connections are mostly distributed along the perimeter of the CLT panels, creating highly redundant structures, previous research on the lateral behavior of CLT structures has mainly focused on the behavior of the connections placed at the base of the CLT shear walls, such as hold downs and angle brackets, while limited attention has been paid to the connections between perpendicular walls and their effect on the lateral response of CLT shear walls. This paper presents a comprehensive experimental study aimed at investigating the effects of the interaction between perpendicular walls on the lateral response of CLT shear walls. CLT shear walls with three different aspect ratios were analyzed by means of monotonic and cyclic tests, both in single wall configuration and connected to perpendicular walls. The experimental findings demonstrate that the structural interaction due to the perpendicular walls significantly affects the lateral response of a CLT shear wall, resulting in increased lateral stiffness, lateral capacity, and deformation capacity. In addition, the study presents two analytical models for the prediction of the lateral stiffness and the lateral capacity of CLT shear walls connected to perpendicular walls. The analytical models were validated based on the experimental results, showing reasonable agreement. [ABSTRACT FROM AUTHOR]

As the inverter-based generation replaces the conventional synchronous generators, it may also need to fill in the missing ancillary service support. One of these ancillary services is dynamic reactive power provision and voltage control. This paper analyzes optimal strategy of reactive and active fault-current support of the inverter-based generation leading to fast voltage recovery of the system. For the purpose of the analysis, new ramping active current controller able to emulate different behavior of active current injection is proposed. By optimizing its parameters for different case studies of the system, the conclusions about optimal behavior of the inverter based generation with respect to system parameters and operating conditions are drawn. It is observed that the optimal combination of active and reactive fault-current is the most sensitive to the dynamic load component penetration levels in the system. With the increasing penetration levels, the significance of active fault-current injection increases. The results show that with higher penetration levels of dynamic load component in the heavy load areas, the ramping down of the inverter-based generation active fault-current results in slower voltage recovery of the system. Following this conclusion, a recommendation on update of current European grid codes is proposed. [ABSTRACT FROM AUTHOR]

This paper addresses the frequency oscillation problem in a parallel-inverter-based grid-connected system. Angular frequency interactions between inverters and the grid exhibit various numbers of complicated characteristics that seriously threaten the connected power system's stable operation. This paper proposes a unified frequency oscillation method analysis to investigate the oscillation problem in a multi-VSG grid-connected system. In this method, the power control model of each grid-connected inverter is equivalent to a two-terminal network by analogy method, which can be described as a “current source” connected in parallel with a reciprocal of “admittance” and then joined in series with a joint of “admittance.” Next, considering the influence of grid impedance, the model of the whole grid-connected system is established to reveal the mechanism of multi-VSG angular frequency oscillation. Subsequently, the influence factors of frequency oscillation and its variation law are analyzed through transfer functions, which provide an essential theoretical method for solving the frequency oscillation problem in the current multi-inverter grid-connected engineering application. Finally, we validate the effectiveness and correctness of the small-signal model and the frequency oscillation characteristics by building the MATLAB/Simulink simulation. [ABSTRACT FROM AUTHOR]

The Cox proportional hazards model is a popular semi-parametric model for survival analysis. In this paper, we aim at developing a federated algorithm for the Cox proportional hazards model over vertically partitioned data (i.e., data from the same patient are stored at different institutions). We propose a novel algorithm, namely VERTICOX, to obtain the global model parameters in a distributed fashion based on the Alternating Direction Method of Multipliers (ADMM) framework. The proposed model computes intermediary statistics and exchanges them to calculate the global model without collecting individual patient-level data. We demonstrate that our algorithm achieves equivalent accuracy for the estimation of model parameters and statistics to that of its centralized realization. The proposed algorithm converges linearly under the ADMM framework. Its computational complexity and communication costs are polynomially and linearly associated with the number of subjects, respectively. Experimental results show that VERTICOX can achieve accurate model parameter estimation to support federated survival analysis over vertically distributed data by saving bandwidth and avoiding exchange of information about individual patients. The source code for VERTICOX is available at: https://github.com/daiwenrui/VERTICOX. [ABSTRACT FROM AUTHOR]

To research the impact of temperature-dependent characteristics of windings and magnets on the electromagnetic power loss and thermal properties of high-speed (HS) interior permanent magnet synchronous machines (PMSMs), an electromagnetic-thermal bi-directional coupling method (BDCM) is proposed for water-cooled HS PMSMs considering the assembling gaps between the motor components in this paper. The electromagnetic power loss is calculated by 3-D transient finite-element method and loaded into the 3-D temperature field according to the actual loss distribution, and the materials’ properties are in turn updated according to the temperature distributions. The loss and temperature calculation results of a 15kW HS amorphous metal PMSM are calculated by two different coupling methods in the conditions of the rated-load sinusoidal supply and converter supply, and compared with the measured results in the case of converter supply. The results obtained by the BDCM are more consistent with the experiment results, verifying the superiority of the proposed analyzing method in improving the calculation accuracy of motor loss and temperature rise. In addition, the applicable conditions of the proposed method are also summarized in the paper. [ABSTRACT FROM AUTHOR]

The mining method that is still often used in salt deposits is the room-and-pillar mining method, in which the dimensioning of the most requested element in the system is followed. The pillars are the elements subjected to the greatest loads. Knowing the size and distribution mode of the secondary state of stress—deformation—is a necessity that can lead to the design and realization of stable, reliable underground excavations. This paper proposes an analytical assessment model of the secondary stress state in the pillars between the operating rooms, as well as in the whole system room–pillar–floor, based on the results obtained from laboratory research through modeling and in situ research. For this purpose, the evaluation of the secondary stress state was carried out considering the following methods: (1) the dimensioning method based on the theory of limit equilibrium, taking into account the effective stress in the pillars; and (2) the mechanics of the continuous environment based on the design of some analytical models for evaluating the secondary stress-deformation state in the pillar and floor. The exploitation of one of the largest salt deposits in Romania is used as a case study, and the stability of the exploitation system with rooms and pillars is evaluated by analytical methods. The secondary state of tension was calculated at different points on the height of the pillar. Through the proposed algorithm, the value of the axial component of the secondary stress state at different points along the axis of a pillar located at a depth of 100 m varies between 1.498 and 1.657 MPa, compared to the value obtained by the finite element method and in situ measurements, which was 1.64 MPa. The comparison revealed a high degree of agreement between the results obtained for the depth of 100 m using both the FEM and laboratory and in situ measurements. This suggests that the proposed algorithm is a reliable method for predicting the secondary stress state. The presented algorithm can be extended in the field of mining deposits, where mining methods with rooms and pillars are used. [ABSTRACT FROM AUTHOR]

In this paper, the boundary discretization method is used to improve the traditional subdomain model. The improved model can be used to calculate the magnetic field distribution in the region containing non-orthogonal boundary, avoiding the influence of the simplified stator slot or permanent magnet shape on the results in calculating the motor magnetic field using the traditional subdomain model. In addition, the improved subdomain model can also be used to calculate the air-gap flux density when the rotor is eccentric, instead of segmenting the air-gap to an equivalent state without eccentricity. The calculation object of this paper is a surface-mount permanent magnet motor with a rectangular stator slot. The air-gap flux density under no-load and load conditions is calculated, respectively. Since the improved subdomain model does not need to simplify the stator slot shape, the magnetic potential in the stator slot is also calculated. Finally, the air-gap flux density under rotor eccentricity is calculated, and the influence of the calculating parameters on the results of the improved subdomain model is discussed. All the calculated results are compared with those obtained by the finite element method, which verifies the accuracy of the improved calculation model. [ABSTRACT FROM AUTHOR]

This paper proposes a way to represent the anisotropic nonlinear superconducting properties using a discrete model for magnetization with the corresponding critical parameters, equivalent to the Power Law model for currents. This simplified model makes it possible to analyze magnetic systems with superconducting elements in a stationary mode, which reduces the calculation time. Using of proposed model is demonstrated by the calculation of force interactions between high-temperature superconducting (HTS) samples and permanent magnet in zero-field-cooling (ZFC) and field-cooling (FC) modes. HTS bulks in the form of a prism and stack made of HTS tape are considered. The calculation of the electromagnetic field was carried out using the method of integral equations for field sources. The data of calculations are compared with the results of experimental studies. [ABSTRACT FROM AUTHOR]

Millimeter-wave rotary-wing (RW) unmanned aerial vehicle (UAV) air-to-ground (A2G) links face unpredictable Doppler effect arising from the inevitable wobbling of RW UAV. Moreover, the time-varying channel characteristics during transmission lead to inaccurate channel estimation, which in turn results in the deteriorated bit error probability performance of the UAV A2G link. This paper studies the impact of mechanical wobbling on the Doppler effect of the millimeter-wave wireless channel between a hovering RW UAV and a ground node. Our contributions of this paper lie in: i) modeling the wobbling process of a hovering RW UAV; ii) developing an analytical model to derive the temporal autocorrelation function (ACF) for the millimeter-wave RW UAV A2G link in a closed-form expression; and iii) investigating how RW UAV wobbling impacts the Doppler effect on the millimeter-wave RW UAV A2G link. Numerical results show that different RW UAV wobbling patterns impact the amplitude and the frequency of ACF oscillation in the millimeter-wave RW UAV A2G link. For UAV wobbling, the temporal ACF decreases quickly and the impact of the Doppler effect is significant on the millimeter-wave A2G link. [ABSTRACT FROM AUTHOR]

This report analyzes the reproducibility of the article “Computing Planetary Interior Normal Modes with A Highly Parallel Polynomial Filtering Eigensolver” by Jia Shi et al. (Shi, 2018). To reproduce the results we perform different weak and strong scaling studies using a series of Mars models. All experimental runs were performed during the SC19 Student Cluster Competition on a four node Intel Skylake cluster. We show that the findings of the original article can be reproduced in a different environment. [ABSTRACT FROM AUTHOR]

High-quality generator dynamic models are critical to reliable and accurate power systems studies and planning. With the availability of PMUs, measurement-based approach for model validation has gained significant prominence. In this approach, the quality of a model is analyzed by visually comparing measured generator response with the model-based simulated response for large system disturbances. This paper proposes a new set of performance metrics to assess the model validation results to facilitate automation of the model validation process. In the proposed methodology, first, the slow governor response and comparatively faster oscillatory response are separated, and then a separate set of performance metrics is calculated for each of these two components. These proposed metrics quantify the mismatch between the actual and model-based response in a comprehensive manner without missing any information enabling automation of the process. Furthermore, in this paper, we are also proposing that the sensitivity analysis for model calibration be performed with respect to the proposed metrics for the systematic identification of key parameters. Results obtained using both simulated and real-world case-studies validate the effectiveness of the proposed performance metrics for model validation and their application to the sensitivity analysis for model calibration. [ABSTRACT FROM AUTHOR]

Featured Application: The present paper evaluates 10 alternative shoreline pond electrode station designs using frames in a linear arrangement of electrodes for HVDC interconnections, against the typical design, according to CIGRE B4.61/2017 (parallel arrangement of electrode frames, with respect to the longitudinal axis of the breakwater), studying it from the point of view of electric field analysis (with emphasis on the near-field). During the design of a shoreline electrode station for High-Voltage Direct Current (HVDC) interconnections, the location of the electrodes plays a critical part, especially in the development of the near-electric field. The basic structure is their linear placement, in the form of successive frames, parallel to the longitudinal axis of the breakwater, as proposed by CIGRE and implemented in existing projects. However, this arrangement requires a considerable breakwater length, which may not be permissible, as in the case of Stachtoroi, one of the two electrode stations being built for the 1 GW, ±500 kV HVDC interconnection between Crete and mainland Greece. This troubled the preliminary study team of the electrode stations, which investigated other possible configurations. In this paper, configurations of linear placements of electrode frames are studied and compared at the preliminary study level in terms of electric field effects (especially the near-field), using an analytical simplified model and the superposition method, to determine the most appropriate arrangement of electrodes that will cover the respective requirements of CIGRE directives B4.61/2017. These arrangements are practically evaluated for two different electrode station locations at Korakia in Crete and at Stachtoroi in Aegina for the Crete–mainland-Greece interconnection, resulting in interesting alternative solutions. [ABSTRACT FROM AUTHOR]

The term “business incubator” (BI) has become an accepted neologism among academics, practitioners, and policymakers. This is despite the lack of an agreed definition amongst scholars of what exactly constitutes a BI. Using a systematic literature review methodology, we identify and analyze definitions of BIs used in published academic research papers and practice papers over a 35-year period. In this article, we undertake a thematic analysis, using the software package NVivo, of 82 academic and 14 practice definitions used in 61 publications. Our analysis shows that definitions of BIs are constructed around three core themes: the business incubation model; the purpose of the incubator; and the target of support provided by the incubator. By identifying both consistencies and inconsistencies in existing definitions, we provide a more nuanced understanding of the heterogeneity that underlies the organizational form referred to as a BI. We conclude by proposing an agenda for further research. [ABSTRACT FROM AUTHOR]

Network data in real-world tends to be error-prone due to incomplete sampling, imperfect measurements, etc.; this in turn results in inaccurate results when performing network analysis or modeling, such as node classification and link prediction, on these flawed networks. In this paper, we aim to reconstruct a reliable network from a flawed, undirected, unweighted network, a process referred to network enhancement. More specifically, network enhancement aims to detect the noisy links that are observed in the network but should not exist in the real world, as well as to predict the missing links that do indeed exist in the real world yet remain unobserved. While some attempts have been made to detect either noisy links or missing links, few of these works have considered unifying these two tasks, even though they are inter-dependent and capable of mutually boosting each others’ performance. In this paper, we therefore propose E-Net, an end-to-end graph neural network model, to leverage the mutual influence of these two tasks in order to achieve both goals more effectively. On one hand, detecting noisy links can benefit the performance of missing link prediction, while on the other hand, predicting missing links can provide indirect supervision for detecting noisy link detection when the labels of these noisy links are unavailable. Moreover, by proposing a subgraph extraction mechanism based on random walk with restart, the model can be scaled up to large networks and is able to preserve the local and global structural characteristics. The experimental results on several types of large networks demonstrate that the proposed model obtains an improvement of 10.7 percent on average in terms of F1 for predicting missing links, along with an average of 3.7 percent improvement in terms of precision for detecting noisy links compared with the state-of-the-art baselines. [ABSTRACT FROM AUTHOR]

Modern Medical Information Systems very often comprise Medical Devices and governed by regulations which require stringent Risk Management activities to be implemented to minimize the occurrence of safety risks. Currently, the reference standard adopted by manufacturers for Risk Management is ISO 14971, which, however, was devised for traditional (mostly hardware) Medical Devices and does not either take into account the peculiarities of modern Medical Information Systems, or define a formal methodology to conduct Risk Assessment. Moreover, the approaches currently implemented by manufacturers typically aims at obtaining qualitative Risk Assessment results. Within the so-delineated application scenario, this paper proposes a methodology for the Dynamic Probabilistic Risk Assessment of Medical Information Systems, by specifically looking at medical devices that are intended as one of the most relevant components in such systems. The methodology complies with ISO 14971 and improves current practices because it allows the analyst to conduct a quantitative analysis, also taking into account the temporal dimension. It relies on a Probabilistic Risk Model, defined as a set of Markov Models, which is model-checked to obtain quantitative information about the risks. The proposed methodology is also adopted to improve definitively the Medical Device post-market surveillance, which is currently implemented as a ”wait for an incident” activity. In other words, currently a manufacturer sets up a service that has to ”react” to an incident by starting an investigation activity. Instead, the methodology proposes the adoption of risk models defined during the development phase also to re-assess periodically the risks related to the product during the post-market surveillance. This may prevent some incidents because risks are assessed using data collected in the field (no longer guesstimated as during the development phase) and taking into account the temporal effects on probability distributions (such as the deterioration of hardware/software components over the time). [ABSTRACT FROM AUTHOR]

A good quality stability model is a key factor for accurate power system operations.Inaccurate parameters of the stability models affect the decision making which paves the way for serious consequences. Thus, it is necessary to calibrate the stability model parameters in a regular manner. There are several calibration methods in the literature which are based on simultaneous estimation of the parameters and states. However, not all of the model parameters are well estimable simultaneously. Simultaneous estimation of parameters with high collinearity may result in biased calibration results. In this paper, the trajectory sensitivity method is used to detect the sensitive parameters and construct the sensitivity matrix. Then, parameters with high linear dependency are identified using the sensitivity matrix. It is shown that, despite the high sensitivity of a parameter, its estimability degrades as the collinearity with other parameters increase. In this paper an identifiability analysis that detects the collinearity among the sensitive parameters is proposed. The proposed method is validated using WSCC 9-Bus System. [ABSTRACT FROM AUTHOR]

The dataflow concept has been successfully used for modeling and synthesizing signal processing applications since decades, and recently, dataflow has also been discovered to match the computation model of machine learning applications, leading to extremely successful dataflow based application design frameworks. One of the most attractive features of dataflow, especially for signal processing, is related to its formal nature: when properly defined, a dataflow-based application model can be analytically verified for correctness at the stage of application design. This paper proposes VR-PRUNE, a novel dataflow model of computation that is aimed for design of high-performance signal processing software, together with runtime support that allows efficient application deployment to heterogeneous GPU-equipped platforms. Compared to prior work, VR-PRUNE features variable token rate processing, which enables designing adaptive signal processing applications, and implementing solutions that, e.g., allow trading-off between power consumption and filtering bandwidth at runtime. The paper presents the formal concepts of VR-PRUNE, as well as four application examples from domains related to signal processing, accompanied with quantitative results, which show that using VR-PRUNE enables, for example, application power-performance scaling, and on the other hand describing adaptive application behavior with 59% fewer dataflow graph components compared to previous work. [ABSTRACT FROM AUTHOR]

This paper proposes a linear regression model for scalar-valued responses and two-way functional (bivariate) predictors. Our motivation stems from the quality evaluation of products based on optical emission spectroscopy data from virtual metrology of semiconductor manufacturing. We focus on multivariate cases where the smoothness and shapes of the data vary significantly across variables. We propose a two-step solution to this problem, consisting of decomposition and prediction. First, we decompose the two-way functional data into pairs of component functions using functional singular value decomposition. Next, we build functional linear models for the decomposed functional variables and obtain the final predictor by averaging the models. Results from numerical studies, including simulation studies and real data analysis, demonstrate the promising empirical properties of the proposed approach, especially when the number of predictors is large. [ABSTRACT FROM AUTHOR]

Balloon-type mass timber shear walls are one of the most efficient structural systems to resist lateral loads induced by earthquakes or high winds. They are a viable solution for high-rise buildings because they have several key advantages, such as reducing connections and avoiding accumulating compression perpendicular to grain in the floors. This system, however, is not included in current Canadian building code and has no design guidelines in the Canadian timber standard, so it is out of reach of most designers. A multiyear research project has been initiated to quantify the system performance and develop the necessary technical information to codify balloon-type mass timber shear walls. In this paper, the limits for the building height of balloon mass timber shear walls were investigated theoretically. A mechanics-based analytical model was developed to analyze the building height limits governed mainly by the mass timber panels. The influence of loading types (seismic versus wind loads), lateral load levels, panel deformation contribution, seismic force modification factors, and vertical joints between panels on the building heights was investigated using the developed model. The results of this study will give a valuable insight into the seismic performance of balloon type cross-laminated timber (CLT) shear walls. [ABSTRACT FROM AUTHOR]

Copyright of Archives of Civil Engineering (Polish Academy of Sciences) is the property of Polish Academy of Sciences and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

A large number of non-linear hardware and control units exists in power electronic system used in grid connected devices. The analytical transient stability analysis of grid-connected converters presents numerous difficulties. A common method to tackle this problem is the stability analysis using Lyapunov’s method. By applying this method, difficulties arise not only from finding a suitable Lyapunov function, but also from checking the constraint of Lyapunov stability. If the appropriate Lyapunov function is a high-order polynomial, it is very challenging to test if it meets the constraints of Lyapunov stability in certain regions. In this paper, the sum-of-squares programming method is used to obtain the estimation of a converter’s domain of attraction with a relatively small number of iterations compared to classically applied methods, such as the Monte Carlo method. The estimation of the domain of attraction are verified by time-domain simulations and StarSim’s controller hardware-in-the-loop tests in this paper. [ABSTRACT FROM AUTHOR]

A growing body of scientific evidence indicates that exposure to low dose ionizing radiation (< 2 Gy) is associated with a higher risk of developing radioinduced cancer. Additionally, it has been shown to have significant impacts on both innate and adaptive immune responses. As a result, the evaluation of the low doses inevitably delivered outside the treatment fields (out-of-field dose) in photon radiotherapy is a topic that is regaining interest at a pivotal moment in radiotherapy. In this work, we proposed a scoping review in order to identify evidence of strengths and limitations of available analytical models for out-offield dose calculation in external photon beam radiotherapy for the purpose of implementation in clinical routine. Papers published between 1988 and 2022 proposing a novel analytical model that estimated at least one component of the out-of-field dose for photon external radiotherapy were included. Models focusing on electrons, protons and Monte-Carlo methods were excluded. The methodological quality and potential limitations of each model were analyzed to assess their generalizability. Twenty-one published papers were selected for analysis, of which 14 proposed multi-compartment models, demonstrating that research efforts are directed towards an increasingly detailed description of the underlying physical phenomena. Our synthesis revealed great inhomogeneities in practices, in particular in the acquisition of experimental data and the standardization of measurements, in the choice of metrics used for the evaluation of model performance and even in the definition of regions considered out-of-the-field, which makes quantitative comparisons impossible. We therefore propose to clarify some key concepts. The analytical methods do not seem to be easily suitable for massive use in clinical routine, due to the inevitable cumbersome nature of their implementation. Currently, there is no consensus on a mathematical formalism that comprehensively describes the out-of-field dose in external photon radiotherapy, partly due to the complex interactions between a large number of influencing factors. Out-of-field dose calculation models based on neural networks could be promising tools to overcome these limitations and thus favor a transfer to the clinic, but the lack of sufficiently large and heterogeneous data sets is the main obstacle. [ABSTRACT FROM AUTHOR]

The critical nature of vehicular communications requires their extensive testing and evaluation. Analytical models can represent an attractive and cost-effective approach for such evaluation if they can adequately model all underlying effects that impact the performance of vehicular communications. Several analytical models have been proposed to date to model vehicular communications based on the IEEE 802.11p (or DSRC) standard. However, existing models normally model in detail the MAC (Medium Access Control), and generally simplify the propagation and interference effects. This reduces their value as an alternative to evaluate the performance of vehicular communications. This paper addresses this gap, and presents new analytical models that accurately model the performance of vehicle-to-vehicle communications based on the IEEE 802.11p standard. The models jointly account for a detailed modeling of the propagation and interference effects, as well as the impact of the hidden terminal problem. The model quantifies the PDR (Packet Delivery Ratio) as a function of the distance between transmitter and receiver. The paper also presents new analytical models to quantify the probability of the four different types of packet errors in IEEE 802.11p. In addition, the paper presents the first analytical model capable to accurately estimate the Channel Busy Ratio (CBR) metric even under high channel load levels. All the analytical models are validated by means of simulation for a wide range of parameters, including traffic densities, packet transmission frequencies, transmission power levels, data rates and packet sizes. An implementation of the models is provided openly to facilitate their use by the community. [ABSTRACT FROM AUTHOR]

Supporting parallel multi-priority data streams is vital for maintaining the quality of service (QoS) in vehicle-to-everything (V2X) communication. Hence, the European telecommunications standard institute (ETSI) has defined four packet types, with varying priority levels, to be used as broadcast packets in such communication. This paper studies the medium access control (MAC) layer performance of IEEE 802.11p and cellular-V2X (C-V2X) Mode 4 using discrete-time Markov chain (DTMC) based models, while considering parallel multi-priority data streams. The overall model consists of four queue models with their respective traffic generators, which are appropriately linked with the DTMCs modeling the MAC layer operations of IEEE 802.11p and C-V2X Mode 4. Closed-form solutions for the steady-state probabilities of the models are obtained, which are then utilized to derive expressions for key performance indicators at the MAC layer. Numerical results are provided to draw insights on the MAC layer performance of the two technologies. IEEE 802.11p is comparatively superior in average delay, and at maintaining fairness among multi-priority data streams, whereas C-V2X Mode 4 exhibits better collision resolution, which leads to its higher throughput. The paper also includes design insights on possible performance enhancements for future releases. [ABSTRACT FROM AUTHOR]

This paper presents a fast analytical model for estimating the components of the PM flux density distribution in the air-gap for a number of interior permanent magnet synchronous machines (IPMSMs). Deriving the two-dimensional (2-D) analytical model for IPMSMs is more challenging compared to that of surface-mounted permanent magnet synchronous machines (SPMSMs) due to the inconsistent geometry of the rotor in polar coordinates. IPMSMs are usually modeled by using 0-D or 1-D methods such as the magnetic equivalent circuit (MEC); however, the MEC method is unable to take into account the tangential component of the magnetic flux density vector. In this paper, a 2-D analytical no-load electromagnetic model for five rotor topologies of IPMSMs is proposed. The effects of the stator slots on the radial component of the PM flux density distribution in the air-gap are then included by defining an air-gap function. The effects of the stator slots on the tangential components of the PM flux density distribution in the air-gap are also considered by injecting virtual surface currents (VSCs) or virtual permanent magnets (VPMs). For verification purposes, the analytical results are compared with those of the finite element method (FEM) and the experimental results of one of the cases. [ABSTRACT FROM AUTHOR]

Magnetic gears can perform the same function as mechanical gears with the added benefits inherent to contactless power transfer. However, quick and accurate analysis tools are required for magnetic gears to reach their full potential. As end effects can significantly impact the slip torque of a magnetic gear, 2D models often overestimate the slip torques, so 3D models are frequently required. Therefore, this paper proposes a 3D linear Magnetic Equivalent Circuit (MEC) or reluctance network model of radial flux magnetic gears with surface mounted magnets. This is an extension of a previously developed 2D MEC model, and, like the previous 2D model, it is thoroughly parametrized so that it can be directly applied to a wide range of parametric cases. This is Part I of a two-part paper and focuses on the implementation of the 3D MEC model. Part II compares the 3D MEC model against nonlinear finite element analysis (FEA) models to validate the MEC model's accuracy and to develop guidelines for discretizing the geometry. [ABSTRACT FROM AUTHOR]

The short-circuit response of inverter-interfaced distributed generators (IIDGs) is not adequately represented in many conventional protection studies. This paper presents an in-depth analysis of IIDG behavior during grid faults and proposes a more accurate reduced-order parameterized short-circuit current (RPSC) model of inverters. Typical inverter components are thoroughly investigated to identify those that play dominant roles during faults. The paper shows that the current limiter is the dominant factor for the steady-state fault-current of inverter; while the inverter filter along with the severity of the voltage disturbance largely determine the initial transient spike of inverter fault current. The proposed model is low-order and can be used in large scale simulations. The parameters of the proposed RPSC model can be extracted from laboratory experiments without requiring proprietary manufacturer information. The proposed fault-current model is analogous to the well-known synchronous machine model that segregates the inverter fault current into subtransient, transient, and steady-state fault currents. Experimental and simulation tests are presented to validate the model. [ABSTRACT FROM AUTHOR]

This paper discusses the back-flashover (BFO) phenomena in a high-voltage (HV) vertical double-circuit transmission line by means of numerical simulations. The single- and multiphase BFOs are analyzed considering 24 cases of AC-voltage angles and nonlinear characteristic of flashovers, taking advantage of the circuit analysis method in time domain. The models used in circuit analysis are the TEM-delay model, which can take into account the non-TEM characteristics of tower and line, and the conventional models. Prior to the BFO analysis, the characteristics of circuit models are compared and discussed with the numerical electromagnetic analysis results. In BFO analysis, it is clarified that the occurrence probability of the multiphase BFO is heavily depending on the bias AC-voltages. The relation of measured BFO phases and AC-voltages are well explained by the TEM-delay model with the valid lightning current magnitude. The conventional circuit models could have underestimated the occurrence of BFOs in HV transmission lines. The analysis and discussions shown in this paper can be utilized for advanced evaluation of lightning performance of transmission lines that considers the seriousness of lightning accidents. [ABSTRACT FROM AUTHOR]

This research paper presents and comments on analytical models for calculating the widths of cracks formed as a result of imposed deformations generating tensile stresses in reinforced concrete base-restrained members. This issue regarding the mechanics of concrete structures has been presented on the basis of calculation models since 1968. In accordance with the current regulations of the European standard, the mechanics of the cracking of base-restrained members have been presented in a very simplified way, which was justified by a limited number of research studies performed on such members as well as in a few subject publications. The main purpose of this work was to present especially those models that had the greatest practical significance within a specific period of time or formed the basis for further studies of other authors. In addition, future trends in the development of computational tools are presented. The chronologically presented development of design ideas, which takes into account varying degrees of advancement of the mechanics of cracking due to the distinctly different design consequences, is a valuable source of information and an inspiration for subsequent researchers. In the second part of the paper, a few of the most important issues connected with the calculation of the crack width in base-restrained walls are presented. It is shown that currently, on the basis of the up-to-date knowledge, there are possibilities to create more complementary standard guidelines, which is already taking place in the case of European guidelines. [ABSTRACT FROM AUTHOR]

This paper aims at proposing an unsupervised hierarchical nonparametric Bayesian framework for modeling axial data (i.e., observations are axes of direction) that can be partitioned into multiple groups, where each observation within a group is sampled from a mixture of Watson distributions with an infinite number of components that are allowed to be shared across different groups. First, we propose a hierarchical nonparametric Bayesian model for modeling grouped axial data based on the hierarchical Pitman-Yor process mixture model of Watson distributions. Then, we demonstrate that by setting the discount parameters of the proposed model to 0, another hierarchical nonparametric Bayesian model based on hierarchical Dirichlet process can be derived for modeling axial data. To learn the proposed models, we systematically develop a closed-form optimization algorithm based on the collapsed variational Bayes (CVB) inference. Furthermore, to ensure the convergence of the proposed learning algorithm, an annealing mechanism is introduced to the framework of CVB inference, leading to an averaged collapsed variational Bayes inference strategy. The merits of the proposed models for modeling grouped axial data are demonstrated through experiments on both synthetic data and real-world applications involving gene expression data clustering and depth image analysis. [ABSTRACT FROM AUTHOR]

The increasing penetration of distributed renewable energy sources drastically alters the dynamic characteristics of distribution networks (DNs). Therefore, several equivalent models have been recently proposed, to analyze more accurately the complex behavior of modern DNs. However, relatively simple models are still commonly used in practice for dynamic power system studies. In addition, dynamic equivalent models for DNs are sensitive to different operating conditions and there is lack of systematic understanding of their performance. Scope of this paper is to propose a methodology for identifying the applicability range in terms of accuracy and generalization capability of several conventional and newly developed equivalent models for the dynamic analysis of modern DNs. A set of metrics is used for the modelling accuracy assessment and a sensitivity analysis framework is introduced to fully quantify the generalization capabilities of DN equivalent models. Based on the above, guidelines and recommendations for the development of robust equivalent models for DN analysis are proposed. [ABSTRACT FROM AUTHOR]

Over the past five years, topic models have been applied to bibliometrics research as an efficient tool for discovering latent and potentially useful content. The combination of topic modeling algorithms and bibliometrics has generated new challenges of interpreting and understanding the outcome of topic modeling. Motivated by these new challenges, this paper proposes a systematic methodology for topic analysis in scientific literature corpora to face the concerns of conducting post topic modeling analysis. By linking the corpus metadata with the discovered topics, we feature them with a number of topic-based analytic indices to explore their significance, developing trend, and received attention. A topic relation identification approach is then presented to quantitatively model the relations among the topics. To demonstrate the feasibility and effectiveness of our methodology, we present two case studies, using big data and dye-sensitized solar cell publications derived from searches in World of Science. Possible application of the methodology in telling good stories of a target corpus is also explored to facilitate further research management and opportunity discovery. [ABSTRACT FROM AUTHOR]

Acoustic noise modeling, analysis, and reduction are critical in the design of switched reluctance machines for noise-sensitive applications. Although the analytical method can provide a fast simulation of the acoustic noise, it is generally less accurate compared to the numerical method. In order to improve the simulation accuracy, a novel analytical method is presented in this paper. The proposed method considers the excitation of the high-axial-order vibration modes to simulate the vibration behavior and the acoustic noise in the three-dimensional (3D) domain. Methods of obtaining the input data for the 3D analytical simulations are presented. The acoustic noise results obtained from the numerical simulations and experiments from an 8/6 switched reluctance motor drive are used to validate the analytical method presented in this paper. [ABSTRACT FROM AUTHOR]

This paper presents a dynamic thermal model which predicts the winding temperature of electrical machines at steady-state and transient conditions where windings are used in integrated battery chargers (IBCs) for DC charging in a stationary position. Using winding in high current charging process causes rising winding temperature which affects insulation life. Switched reluctance machines are a proper choice for using in electric vehicles (EVs) because of their advantages such as simple and sturdy structures. IBCs can reduce volume and weight of EVs and total cost is diminished because of integration. The analytical thermal model proposed in this paper can calculates the winding temperature in balanced and unbalanced currents injection because of the phase inductance in each rotor angle is distinct, so current excitation in each phase should be different for obtaining zero total torque and keeping rotor in a stationary position, also a reduced-order model is proposed with minor impact on the accuracy of the model. Special attention has been paid to monitor the winding temperature with considering the motor lifetime in DC charging mode, this view has not been addressed in IBCs before. The proposed model is then validated against experimental results and 3D finite element method. [ABSTRACT FROM AUTHOR]

This paper presents some results on the accuracy of normal form analysis for large deviations from the stable equilibrium point (SEP) in a power system. The results of studies on the region of convergence of Neumann series, which is required for normal form analysis, are presented. A polynomial function approximation is proposed to model the generator exciter limiter. Studies on the accuracy of higher order normal form analysis for large deviations from SEP are presented. Use of Prony analysis in addition to simulation is proposed for the verification of accuracy. [ABSTRACT FROM AUTHOR]

This paper proposes a systematic and general approach to model correlated stochastic processes in power systems by means of stochastic differential-algebraic equations. The paper discusses the theoretical background of stochastic differential-algebraic equations and provides a variety of examples of correlated stochastic models for power system applications. With this aim, stochastic processes with Normal and Weibull distributions are considered. The case study utilizes the well-known two-area system to demonstrate that the presence of correlation between the stochastic processes can cause instability, despite the fact that the same system is stable if the same processes are uncorrelated. The case study also considers a 1479-bus dynamic model of the all-island Irish transmission system to show the scalability of the proposed technique, and to compare scenarios with different levels of correlation among stochastic processes. Results indicate that correlation has a non-negligible impact on short-term dynamics. A high level of correlation among the processes, in fact, can give raise to instability. [ABSTRACT FROM AUTHOR]

Although much work has been done and significant progress has been made on partial discharges (PD) measurement and detection techniques, this is not the case for PD modeling. Four types of internal PD modeling, in sequential order from first to last developed, are three-capacitance (abc), induced charge concept (ICC), finite element analysis (FEA), and Multiphysics models. The abc model is too simple to provide an understanding of the physical phenomena affecting PD. In contrast, Multiphysics models are immature. Multiphysics models require a high number of physical parameters that need to be experimentally determined, which is not a trivial task. Moreover, adjusting the physical parameters to achieve a good agreement between simulation results and measurement results for a specific geometry and dimension may not work for other geometries and dimensions. The FEA model, a relatively recent model, and the ICC model, which fall between the abc and Multiphysics models in terms of modeling complexity, can partly explain mechanisms and physical phenomena associated with internal PD. However, to the best of our knowledge, there is only one paper comparing ICC and FEA models for a case study; thus, further research is needed to elucidate various aspects of these two models. In this paper, 1) an improved ICC and a FEA capable of describing phenomena occurring during PD are developed, 2) both developed models are coded and implemented either in MATLAB or in COMSOL Multiphysics linked with MATLAB, and their simulation results are compared and analyzed, and 3) the influence of different parameters including void shape, void size, and void air pressure on PD parameters are studied. [ABSTRACT FROM AUTHOR]

In this work we study the distance distribution computation problem. It has been widely used in many real-world applications, e.g., human genome clustering, cosmological model analysis, and parameter tuning. The straightforward solution for the exact distance distribution computation problem is unacceptably slow due to (i) massive data size, and (ii) expensive distance computation. In this paper, we propose a novel method to compute approximate distance distributions with error bound guarantees. Furthermore, our method is generic to different distance measures. We conduct extensive experimental studies on three widely used distance measures with real-world datasets. The experimental results demonstrate that our proposed method outperforms the sampling-based solution (without error guarantees) by up to three orders of magnitude. [ABSTRACT FROM AUTHOR]

The high penetration of renewables has sparked new oscillatory concerns in hybrid AC/DC grids. Knowledge of the oscillation regarding its source and propagation mechanism, is crucial to system operation. In this respect, the frequency-domain modal analysis (FMA) provides a way (e.g., participation factor) to extract these oscillation properties, and has been widely applied in converter-based AC grids. Compared to AC grids, oscillation properties of hybrid AC/DC grids are much more complex. Such complexity mainly originates from the diversity of oscillation propagation behaviors in hybrid AC/DC grids, where a distinctive local-area oscillation will emerge. Therefore, a dedicated oscillation propagation analysis for hybrid AC/DC grids is desired, which is the main focus of this paper. First, the mechanism of the distinctive local-area oscillation is analyzed considering AC/DC coupled dynamics of converters. Then, a systematic method for the oscillation propagation analysis is presented, where indices for characterizing the local-area oscillation and its impact area are established. Finally, some propagation properties are discussed, by which a strategy for the online oscillation source locating is designed. Case studies are carried out in a typical hybrid AC/DC grid to validate the propagation analysis in this paper. [ABSTRACT FROM AUTHOR]

This paper presents a small-signal dynamic model for a modular multilevel converter (MMC) based HVDC grid, and then systematically i) identifies the system dominant oscillatory modes, ii) quantifies their propensity to instability phenomena, and iii) devises appropriate countermeasures. Based on the developed model, the eigen structure of an HVDC grid is characterized and the impact of the system parameters, configuration, AC system strength and operating point on the damping ratios of the oscillatory modes, and consequently the HVDC grid stability, are investigated. The model is also applied to systematically determine the sensitive parameters and optimize them to mitigate oscillatory modes and prevent instability. The eigen analysis results are verified based on time-domain simulation studies in the PSCAD/EMTDC platform. [ABSTRACT FROM AUTHOR]

This paper proposes a reconstruction algorithm for the geometric shapes of static overhead transmission lines that is based on the spatial coordinate data (obtained by field mapping) and the corresponding inclination data (obtained by attitude sensors). The algorithm takes the piecewise cubic Hermite interpolation function as the basic framework and corrects the aforementioned two types of data based on the “minimum energy principle” of the transmission line system. The introduction of a new energy function in modified energy method (MEM) overcame the shortcomings of conventional energy method (CEM) in fairing strategy, and the new Fairing Criterion made result curves more consistent with the mechanical properties of transmission lines. In the numerical simulation tests, the two energy methods were compared in terms of load type, horizontal span, elevation difference, and anti-disturbance ability, which showed that MEM has a higher reconstruction accuracy (average Euclidean distance is less than 1 cm) and better robustness than CEM. Meanwhile, the key parameters involved in the algorithm were discussed to guide the application in practical engineering. In addition, measurement tests under non-uniform icing were carried out in the field test station, and the results showed that the maximum relative error is less than 0.1%. [ABSTRACT FROM AUTHOR]

The periodic characteristic of modular multilevel converter (MMC), which originates from the multi-harmonic couplings among internal dynamics, results in challenges to develop the linear time-invariant (LTI) model of MMC. The linearization of MMC is inherently around time-periodic equilibrium trajectory. In this paper, two different methods to assess small-signal stability of MMC are compared. Both are based on the linear time-periodic (LTP) systems theory, but one is in the time domain (TD) and the other is in the frequency domain (FD). The LTP model of MMC is derived from the linearized arm averaged model. Then, an LTI model for the LTP system is constructed in the FD through the harmonic state-space method. Small-signal stability analysis based on Floquet theory and generalized Nyquist criterion, that accompany TD and FD, are introduced and compared. It is demonstrated that models developed in both domains can effectively capture the small-signal behavior of MMC. Third and higher-order harmonic components of the states have significant effect on the impedance-based stability analysis of MMC around mid-frequency range. Analytical results are validated by electromagnetic transient simulations based on the MMC aggregated model. [ABSTRACT FROM AUTHOR]

Image smoothing is a fundamental procedure in applications of both computer vision and graphics. The required smoothing properties can be different or even contradictive among different tasks. Nevertheless, the inherent smoothing nature of one smoothing operator is usually fixed and thus cannot meet the various requirements of different applications. In this paper, we first introduce the truncated Huber penalty function which shows strong flexibility under different parameter settings. A generalized framework is then proposed with the introduced truncated Huber penalty function. When combined with its strong flexibility, our framework is able to achieve diverse smoothing natures where contradictive smoothing behaviors can even be achieved. It can also yield the smoothing behavior that can seldom be achieved by previous methods, and superior performance is thus achieved in challenging cases. These together enable our framework capable of a range of applications and able to outperform the state-of-the-art approaches in several tasks, such as image detail enhancement, clip-art compression artifacts removal, guided depth map restoration, image texture removal, etc. In addition, an efficient numerical solution is provided and its convergence is theoretically guaranteed even the optimization framework is non-convex and non-smooth. A simple yet effective approach is further proposed to reduce the computational cost of our method while maintaining its performance. The effectiveness and superior performance of our approach are validated through comprehensive experiments in a range of applications. Our code is available at https://github.com/wliusjtu/Generalized-Smoothing-Framework . [ABSTRACT FROM AUTHOR]

A hybrid analytical and lumped-parameter thermal model is proposed in this paper to estimate the transient and steady-state two- and three-dimensional (2/3-D) spatial magnet temperature distributions for an interior permanent magnet synchronous machine (IPMSM). On the basis of a lumped-parameter thermal model (LPTM), the magnet analytical thermal models (ATMs) are synergized to establish the hybrid thermal model. By utilizing the transient or steady-state boundary conditions calculated by the LPTM, the ATMs are obtained by solving the heat conduction equations to estimate the spatial magnet temperature distributions in the 2-D horizontal-vertical and axial-vertical planes, which can also be extended to the 3-D temperature distribution by utilizing the multi-slice method. Meanwhile, the non-uniform magnet eddy current loss is also considered. Finally, both electromagnetic-thermal coupled finite element analysis method and experiments are used for verification based on a totally enclosed IPMSM. [ABSTRACT FROM AUTHOR]

In this paper, a nonlinear analysis model for predicting the performance of eddy current recoil brakes (ECRB) is proposed by combining the magnetic equivalent circuit (MEC) model and the subdomain model. The subdomain model introduces the equivalent region to improve the inherent shortcomings of the equivalent current sheet (ECS) method. The outer tube is divided into a magnetic saturated region and an unsaturated region in the subdomain model to simulate the magnetic saturation of the outer tube during recoil. The MEC model is applied to calculate the air gap magnetic flux density and the relative permeability of the equivalent region. Leakage flux and magnetic saturation are considered in the MEC model. The eddy current resistance of ECRB is calculated by the subdomain model. The model is verified by the finite element model, and it is able to predict the performance of ECRB with different structural parameters. In addition, the prototype of the ECRB was manufactured. A test was carried out on a 155 mm artillery to verify the accuracy of the proposed nonlinear analysis model. [ABSTRACT FROM AUTHOR]

This paper analyzes magnet defect fault signature in the surface-mounted permanent magnet motor (SPMM) using nonlinear analytical model considering the influence of magnet shape and magnetization direction. Based on the surface current method and conformal mapping technique, the magnet defect equivalent current and equivalent nonlinearity current are proposed to represent the magnet defect. Accordingly, the performance of SPMM can be obtained. The proposed model has great potential to investigate SPMM with non-uniform magnet defect and gives theoretical basis for fault diagnosis. The extra sensing coil is added to measure the voltage waveforms, which can also be predicted using the nonlinear analytical model and shows the influence of magnet defect fault. Finally, the finite element analysis and experimental results verify the high accuracy of nonlinear analytical model. [ABSTRACT FROM AUTHOR]