Search

Nowadays, the load monitoring system is an important element in smart buildings to reduce energy consumption. Nonintrusive load monitoring (NILM) is utilized to determine the power consumption of each appliance in smart homes. The main problem of NILM is how to separate each appliance's power from the signal of aggregated consumption. In this regard, this paper presents a combination between particle swarm optimization (PSO) and artificial neural networks (ANNs) to identify electrical appliances for demand‐side management. ANN is applied in NILM as a load identification task, and PSO is used to train the ANN algorithm. This combination enhances the NILM technique's accuracy, which is further verified by experiments on different datasets like Reference Energy Disaggregation Dataset, UK Domestic Appliance‐Level ElectricityUK‐DALE, and Indian data for Ambient Water and electricity Sensing. The high accuracy of the proposed algorithm is verified by comparisons with state of the art methods. Compared with other approaches, the total mean absolute error has decreased from 39.3566 to 18.607. Also, the normalized root mean square error (NRMSE) method has been used to compare the measured and predicted results. The NRMSE is in the range of 1.719%–16.514%, which means perfect consistency. This demonstrates the effectiveness of the proposed approach for home energy management. Furthermore, customer behavior has been studied, considering energy costs during day hours. [ABSTRACT FROM AUTHOR]

This paper investigates factors associated with variation in daily total (electricity and gas) energy consumption in domestic buildings using linked pre-COVID-19 smart meter, weather, building thermal characteristics, and socio-technical survey data covering appliance ownership, demographics, behaviours, and attitudes for two nested sub-samples of 1418 and 682 British households selected from the Smart Energy Research Laboratory (SERL) Observatory panel. Linear mixed effects modelling resulted in adjusted R2 between 63% and 80% depending on sample size and combinations of contextual data used. Increased daily energy consumption was significantly associated (p -value < 0.05, VIF < 5) with: households living in buildings with more rooms and bedrooms, that are older, more detached, have air-conditioning, and experience colder (more heating degree days) or less sunny weather; households with more adult occupants, more children, older adult occupants, higher heating temperature setpoints, and that do not try to save energy. The results demonstrate the value of smart meter data linked with contextual data for improving understanding of energy demand in British housing. Accredited UK researchers are invited to apply to access the data, which has recently been updated to include over 13,000 households from across Great Britain. This paper provides guidance on appropriate methods to use when analysing the data. [ABSTRACT FROM AUTHOR]

Short-term building energy consumption forecasting is vital for energy conservation and emission reduction. However, it is challenging to achieve accurate short-term forecasting of building energy consumption due to its nonlinear and non-stationary characteristics. This paper proposes a novel hybrid short-term building energy consumption forecasting model, SSA-CNNBiGRU, which is the integration of SSA (singular spectrum analysis), a CNN (convolutional neural network), and a BiGRU (bidirectional gated recurrent unit) neural network. In the proposed SSA-CNNBiGRU model, SSA is used to decompose trend and periodic components from the original building energy consumption data to reconstruct subsequences, the CNN is used to extract deep characteristic information from each subsequence, and the BiGRU network is used to model the dynamic features extracted by the CNN for time series forecasting. The subsequence forecasting results are superimposed to obtain the predicted building energy consumption results. Real-world electricity and natural gas consumption datasets of office buildings in the UK were studied, and the multi-step ahead forecasting was carried out under three different scenarios. The simulation results indicate that the proposed model can improve building energy consumption forecasting accuracy and stability. [ABSTRACT FROM AUTHOR]

• Implementation of a model predictive control scheme for HVAC systems is presented. • The hardware/software solution is generalisable to most building management systems. • Cloud solutions can offer low-cost, scalable control in commercial buildings. • Economic MPC reduced energy usage by 1.7% compared to baseline control. • Building thermal performance strongly affects viability of MPC schemes. Many businesses are looking for ways to improve the energy and carbon usage of their buildings, particularly through enhanced data collection and control schemes. In this context, this paper presents a case study of a food-retail building in the UK, detailing the design, installation and cost of a generalisable model predictive control (MPC) framework for its Heating, Ventilation and Air Conditioning (HVAC) system. The hardware/software solution to collect relevant data, as well as the formulation of the MPC scheme, is presented. By utilising cloud-based microservices, this approach can be applied to all modern building management systems with little upfront capital, and an ongoing monthly cost as low as $6.39/month. The MPC scheme calculates the optimal temperature setpoint required for each Air-Handling Unit (AHU) to minimise its overall cost or carbon usage, while ensuring thermal comfort of occupants. Its performance is then compared to the existing legacy controller using a simulation of the building's thermal behaviour. When simulated across two months the MPC approach performed better and achieved the same thermal comfort for a lower overall cost. The economic optimisation resulted in an energy saving of 650 kWh, with an associated cost savings of $240 (an improvement of 1.7% compared to the baseline), while the carbon optimisation gave negligible CO 2 savings due to the inability of the building to shift heating to low-carbon periods. Findings from this study indicate the potential for improving building performance via MPC strategies, however the level of impact will depend on specific building attributes. [ABSTRACT FROM AUTHOR]

• A switchable photovoltaic window based on thermotropic hydrogel is developed. • Selected hydrogel can reversibly switch between highly transmissive and scattering states. • The window performance is evaluated by indoor and outdoor experiments. • This window can passively control daylighting and heat gain during hot sunny days. • This window offers better electrical performance than conventional PV glazing. Daylighting control technologies have become an essential part of sustainable building design to reduce overheating, glare and energy consumption in buildings. In this paper, a smart glazing system where a Building Integrated Photovoltaic (BIPV) glazing is coupled with an optically switchable thermotropic hydrogel layer is proposed to improve the daylighting control and electricity generation performance of traditional BIPV glazings. Thermotropic (TT) hydrogels made of various weight percentage combinations of hydroxypropyl cellulose (HPC) polymer, gellan gum and sodium chloride (NaCl) salt were synthesised and first evaluated by visible-near-infrared spectroscopy. Subsequently, small-scale prototypes of the proposed BIPV thermotropic (BIPV-TT) laminated glazing based on these TT hydrogels were fabricated and characterised experimentally under controlled laboratory conditions. The TT hydrogel, which was synthesised of 6 wt% HPC, 0.5 wt% gellan gum and 4.5 wt% NaCl, was selected for further experimental characterisations in a dynamic outdoor environment, due to its appropriate transition temperature of 30.7 °C for use in mild climates with a wide modulation range of solar transmittance from 85.8% (in the transparent state) to 9.6% (in the light-scattering state). The outdoor tests were conducted in Nottingham, the UK, on typical summer days with sunny and partial cloudy conditions. The results showed that using the prototype BIPV-TT laminated glazing can reduce up to 80% of the solar radiation transmitted into the outdoor test cell, while providing up to 12% higher electrical power outputs, compared to its counterpart system with no thermotropic hydrogel applied. [ABSTRACT FROM AUTHOR]

Multisource energy data, including from distributed energy resources and its multivariate nature, necessitate the integration of robust data predictive frameworks to minimise prediction error. This work presents a hybrid deep learning framework to accurately predict the energy consumption of different building types, both commercial and domestic, spanning different countries, including Canada and the UK. Specifically, we propose architectures comprising convolutional neural network (CNN), an autoencoder (AE) with bidirectional long short-term memory (LSTM), and bidirectional LSTM BLSTM). The CNN layer extracts important features from the dataset and the AE-BLSTM and LSTM layers are used for prediction. We use the individual household electric power consumption dataset from the University of California, Irvine to compare the skillfulness of the proposed framework to the state-of-the-art frameworks. Results show performance improvement in computation time of 56% and 75.2%, and mean squared error (MSE) of 80% and 98.7% in comparison with a CNN BLSTM-based framework (EECP-CBL) and vanilla LSTM, respectively. In addition, we use various datasets from Canada and the UK to further validate the generalisation ability of the proposed framework to underfitting and overfitting, which was tested on real consumers' smart boxes. The results show that the framework generalises well to varying data and constraints, giving an average MSE of ∼0.09 across all datasets, demonstrating its robustness to different building types, locations, weather, and load distributions. [ABSTRACT FROM AUTHOR]