Search

The increasing demand for functional nanodevices in sustainable energy applications necessitates the development of innovative approaches. In this study, we present the fabrication and characterization of three-dimensional (3D) structures coated with titanium dioxide (TiO 2) nanorods (NRs). These novel devices are created through the integration of four distinct techniques, multi-photon lithography, post-thermal treatment, pulsed laser deposition, and an aqueous chemical growth, enabling their unique properties and functionalities in photocatalysis. The photocatalytic performance of the 3D devices is evaluated through the degradation of organic pollutants, such as methylene blue and stearic acid, showcasing their efficiency in reducing pollutant concentrations. The devices demonstrate a remarkable decomposition coefficient (k = 0.059 min − 1 ), highlighting their enhanced photocatalytic efficiency. Additionally, we propose a rapid fabrication technique using 3D holographic printing to create large-area TiO 2 -coated micro-structured photocatalytic devices at the mesoscale regime. This approach increases the active surface area, further enhancing the devices' photocatalytic capabilities. By combining additive micro-manufacturing, TiO 2 NR coating, and holographic printing, our work introduces a promising avenue for the development of advanced nanodevices with superior photocatalytic performance in sustainable energy applications. [ABSTRACT FROM AUTHOR]

In view of the demand for high-quality thermal neutron detectors, boron films have recently attracted widespread research interest because of their special properties. In this work, we report on the deposition of boron films on silicon substrates by sub-picosecond pulsed laser deposition (PLD) at room temperature. Particular emphasis was placed on the investigation of the effect of the laser energy density (fluence) on the ablation process of the target material, as well as on the morphological properties of the resulting films. In addition, based on the study of the ablation and deposition rates as a function of the fluence, the ablation/deposition mechanisms are discussed. We show that well-adherent and stable boron films, with good quality surfaces revealing a good surface flatness and absence of cracks, can be obtained by means of the PLD technique, which proves to be a reliable and reproducible method for the fabrication of thick boron coatings that are suitable for neutron detection technology. [ABSTRACT FROM AUTHOR]

This study describes the fabrication of ultrafast laser-induced periodic nanostructures on Nickel sheets and their use as cathodes in alkaline electrolysis. For the first time, to the best of our knowledge, laser-nanostructured Ni sheets were used as cathode electrodes in a custom-made electrolysis cell at actual, Hydrogen producing conditions, and their efficiency has been compared to the untreated Nickel sheets. The electrochemical evaluation showed higher J peaks , lower overpotential, and enhanced double-layer capacitance for the nanostructured electrode. A decrease in the Tafel slope was also found for the nanostructured electrode. The hydrogen production efficiency was found to be 3.7 times larger for the laser-nanostructured Nickel electrode, which was also confirmed by current-time measurements during electrolysis. Also, a novel approach is proposed to improve the stability of the current density during electrolysis and, therefore, the hydrogen production process by about 10%. [Display omitted] • Laser nanostructured Ni electrodes produce higher values of hydrogen gas. • An Electrochemical evaluation of laser nanostructured Ni electrodes. • A Correlation between electrical measurements and hydrogen production during electrolysis. [ABSTRACT FROM AUTHOR]