Search

Purpose: The reason for writing the paper is growing complexity of management of the electric grid. Our collective electric system faces accelerating, multi-dimensional needs that must be addressed to deliver to our communities. Design/methodology/approach: The supply, transmission, distribution, and consumption of electricity are closely coupled, and must be actively coordinated. This requires the coordinated sensing, measurement, and control of devices and systems spread across the grid. This paper assesses the suitability of blockchain for this purpose, as a platform for transactive energy. Findings: Blockchain technology can facilitate secure and transparent record-keeping and transactions and thus may have many potential applications in the energy sector. Practical implications: Blockchain technology is still evolving and faces some challenges, such as scalability, interoperability, regulation, and adoption. However, blockchain has the potential to revolutionize the energy sector by transforming the way energy is produced, distributed, consumed, and traded. Social implications: High electricity demand, aging power grids, and climate disasters are straining our current energy system. As a result, more people are looking to optimize energy usage—and transactive energy may offer an answer. A Blockchain-enabled transacted energy framework can help everyone from consumers to corporations benefit from improved energy efficiency and profit in the process. Originality/value: Distributed energy resources, such as energy efficiency, smart demand response, smart electric vehicle charging, building-level energy storage and distributed solar photovoltaics, become more critical every year. Review of recent papers on these issues may be a valuable source of knowledge for interested parties. [ABSTRACT FROM AUTHOR]

Purpose: This paper aims to highlight a broader definition of good building performance that goes beyond the traditional emphasis on technical aspects, only adopting the lens of the social construction of technology (SCOT) in the empirical space of the workplace sector. Several building performance evaluation (BPE) methods focus on technical aspects such as energy consumption, indoor environmental conditions and compliance with building regulations and standards. Technical aspects, albeit important goals, only embed a partial component of what buildings are expected to deliver. There is growing interest in considering the organisational and experiential expectations of building performance, particularly integrating various views of performance as expected by different user groups. Design/methodology/approach: The paper adopts an archival research method to analyse the archive of the workplace consultants DEGW, particularly focusing on their work on London's Broadgate development in the 1980s and the 1990s. Findings: The findings reveal how voices from a pluralistic client organisation can be addressed to articulate a broad definition of building performance that integrates different viewpoints encompassing technical, organisational and experiential expectations. In DEGW's work, the views on building performance of various stakeholders involved in the everyday use and management of buildings are identified without imposing predetermined agendas or research notions of performance. Particular emphasis is given to understanding clients as not a homogenous entity but consisting of different interest groups, which implies multiple conceptualisations of building performance and the building itself. Research limitations/implications: The performance expectations of a building vary between organisations and even within any organisation. Moreover, the needs of an organisation will change over time, and the BPE criteria need to be changed to ensure better alignment between organisations and the physical spaces they occupy. A critical reflection on the conceptualisation of "users" and "building" in BPE methods is required to create an integrated approach towards building performance. Originality/value: The paper offers insights by adopting the theoretical lens of SCOT to explore an integrated approach to building performance that captures the varied needs of building users through the example of London's Broadgate development. [ABSTRACT FROM AUTHOR]

A reasonable allocation of production schedules and savings in overall electricity costs are crucial for large manufacturing conglomerates. In this study, we develop an optimization model of off-site industrial production scheduling to address the problems of high electricity costs due to the irrational allocation of production schedules on the demand side of China's power supply, and the difficulty in promoting industrial and commercial distributed photovoltaic (PV) projects in China. The model makes full use of the conditions of different PV resources and variations in electricity prices in different places to optimize the scheduling of industrial production in various locations. The model is embedded with two sub-models, i.e., an electricity price prediction model and a distributed photovoltaic power cost model to complete the model parameters, in which the electricity price prediction model utilizes a Long Short-Term Memory (LSTM) neural network. Then, the particle swarm optimization algorithm is used to solve the optimization model. Finally, the production data of two off-site pharmaceutical factories belonging to the same large group of enterprises are substituted into the model for example analysis, and it is concluded that the optimization model can significantly reduce the electricity consumption costs of the enterprises by about 7.9%. This verifies the effectiveness of the optimization model established in this paper in reducing the cost of electricity consumption on the demand side. [ABSTRACT FROM AUTHOR]

To overcome the weakness of the Schottky junction solar cell, AuNPs were used to enhance solar cell efficiency by reflecting the light, and a QDs layer was deployed as a luminescent downshifter. Because the white backsheet reflects incident light to solar cells, additional absorbed light can increase the power and efficiency; however, considering the effective area of solar cells in PV modules, the gap spaces should be carefully optimized. Without an anti-reflection layer, an inverted GaAs solar cell proved that using metal wafer bonding and the epitaxial lift-off process is appropriate for III-V solar cells, which are hetero-epitaxially grown on Si substrates. [Extracted from the article]

Countless years have been spent researching the strategies necessary for improving the energy consumption of buildings globally. There have been numerous attempts at achieving both passive solutions and enhancing and optimising the existing active systems. This paper seeks to review, analyse and summarise the possibilities of using thermoelectricity in two different contexts to the integration with buildings, integrated thermoelectric systems, and non-integrated thermoelectric systems. The utilisation of thermoelectricity in cohorts with existing renewable technologies and the utilisation of thermoelectric systems that operate individually, both have the potential to provide the occupants of a building with conditions pertinent to thermal and visual comfort. The results in this paper are classified according to the integration types of thermoelectric systems within different parts of the fabric of a building while maintaining an active role in enhancing the building envelope and self-contained thermoelectric systems that sustain a passive role for the same. The introduction to this paper also gives a very broad and surface-level insight into categorisation of different kinds of thermoelectric systems that are being studied and researched across the world. [ABSTRACT FROM AUTHOR]

Copyright of Romanian Journal of Civil Engineering / Revista Română de Inginerie Civilă is the property of Matrix Rom and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

With the escalating urgency for sustainable energy alternatives, solar power in urban landscapes has gained prominence. Building‐integrated photovoltaic (BIPV) systems are pivotal in this shift, blending efficient energy generation with architectural aesthetics. This review casts a spotlight on BIPV technologies, with a special emphasis on the less‐explored semitransparent photovoltaics (PVs). These systems are not only energy generators but also natural light facilitators, setting them apart from their opaque PV counterparts. Advancements in both transparent and opaque PV, such as crystalline silicon, are discussed. However, the paper prioritizes semitransparent PV's unique benefits, including harmonious integration with building design and simultaneous energy and daylight management. An exhaustive examination of current literature and developments sketches BIPV's trajectory, highlighting applications, challenges, and technological strides. The narrative extols the aesthetic, financial, and efficiency merits of BIPV, particularly the semitransparent variants' blend of functionality and design. Performance optimization of BIPV systems is scrutinized across various environments and architectural styles. This meticulous discussion seeks to clarify the status quo, emerging research avenues, and future prospects of BIPV in fostering a greener energy transition. The review compares BIPV configurations with traditional solar PV systems, charting a path for enhanced energy production, cost efficiency, and aesthetic integration, with semitransparent PV as a key player. By exploring the interplay between architectural design, energy efficiency, and urban planning, this paper aims to solidify the groundwork for future research, reinforcing the sustainability narrative in urban energy infrastructure. [ABSTRACT FROM AUTHOR]

Buildings worldwide have evolved based on local resources and skills, evolving form and orientation to ensure a productive and comfortable indoor environment. Traditional habitations rely on passive climate-responsive mechanisms and physiological resilience. At the same time, contemporary buildings rely increasingly on active mechanisms for fine-tuned convenience and comfort. Those buildings are becoming less habitable due to climate change. This paper presents an overview of research into climate-responsive building adaptation, identifying various factors determining a building's ability to regulate external climatic conditions in providing a habitable indoor environment. The review covers the ability of occupants to manage their thermal environment and adaptation mechanisms, including various adaptation strategies attributed to climate change. Besides a review of relevant research tools and methodologies, the paper also identifies future research challenges. Those challenges include but are not limited to evaluating climate classification provided by building standards given climate change, the need for region-specific climate-change vulnerability assessment of the built environment to develop specific adaptation strategies, a survey of vernacular structures to understand their inherent adaptation capacities, developing a framework to study building adaptation, etc. Thus, this review opens the possibility of further research in building adaptation. [ABSTRACT FROM AUTHOR]

Energy has an effective role in economic growth and development of societies. This paper is studying the impact of climate factors on performance of solar power plant using machine learning techniques for underlying relationship among factors that impact solar energy production and for forecasting monthly energy production. In this context this work provides two machine learning methods: ANN for forecasting energy production and decision tree useful in understanding the relationships in energy production data. Both structures have horizontal irradiation, sunlight duration, average monthly air temperature, average maximal air temperature, average minimal air temperature and average monthly wind speed as inputs parameters and the energy production as output. Results have shown that used machine learning models perform effectively, ANN predicted the energy production of the PV power plant with a correlation coefficient higher than 0.97. The results can help stakeholders in determining energy policy planning in order to overcome uncertainties associated with renewable energy resources. [ABSTRACT FROM AUTHOR]

Building-Integrated Photovoltaic (BIPV) systems have become the most attractive clean solution for generating sustainable energy in building structures. Thus, the challenge of improving their efficiency is of extreme importance. The deployment of remote monitoring systems based on the Internet of Things (IoT) presents an opportunity to reduce the overall costs associated with BIPV systems. However, the performance of these monitoring systems varies depending on different parameters and environmental conditions. This paper presents a low-cost IoT-based prototype for monitoring of a solar photovoltaic panel connected to a battery. The current, voltage, and temperature values of the panel and battery, along with environmental parameters such as humidity, temperature, and solar irradiance were measured using lowcost relevant sensors. The data were sent and stored in PostgreSQL database servers through the Raspberry Pi4 Wi-Fi microcontroller board. Real-time visualization of data was facilitated through Web monitoring interfaces. The intelligent monitoring system was implemented in a facility located in Gabes, Tunisia. [ABSTRACT FROM AUTHOR]

Climate change has an impact on the ecosystem, and subsequently, it affects the built environment. Building envelope has a vital role in controlling the integration between indoor and outdoor environmental quality. The responsivity of the façade has proven its efficiency in optimizing the global energy performance of buildings. Adaptive façades are multifunctional reconciling envelope dynamic systems that improve sustainability with the purpose of utilizing environmental parameters. This paper tackles the research gap in integrating façades circularity, adaptive envelopes, and design for disassembly. The research investigates the merge between biodegradability, circularity of adaptive façades components, and interior space micro-climate control for energy efficiency. This paper presents a proof of concept for a circular adaptive façade during two phases in its life cycle: operation and reuse phases. A scientific quantitative method took place which is based on a hybrid method; computational simulation, smart control, and an up-scale model. Adaptability is investigated through the façade life cycle from design to disassembly instead of demolition and consequent waste production, by exploiting sustainable materials. As a result, an empirical prototype is constructed. The prototype provides 3 levels of adaptability across the design, operation, and disassembly for reuse. Subsequently, this work proposes an up-scale physical model that can help in mitigating the climate change effects. [ABSTRACT FROM AUTHOR]

The current paper discusses the effect of gravity assisted thermosyphon heat pipe cooling on the performance of solar photovoltaic panels. In this experimental study two identical photovoltaic modules along with two thermosyphon heat pipes have been manufactured. Heat pipes have been used to passively cool one of the modules, in order to reduce its operating temperature. The other module, without heat pipes has been used as the reference module. Distilled water is used as the working fluid in two wickless heat pipes. The two modules have been installed close to each other at Indian Institute of Technology, Bombay, India. For the comparative performance analysis of both the modules, experimental parameters such as solar irradiance, ambient temperature, current and voltage from each module along with their temperatures have been monitored through a data logger. Minute-wise values of the various parameters have been recorded and stored. The actual test duration for this study has been considered as 9 AM to 5 PM, during which the solar irradiance is prominent and the data is tabulated at intervals of 15 minute. A comprehensive performance analysis has been carried out for the various dates and has been presented in this paper. An optimum temperature drop of almost 6 oC is achieved due to thermosyphon heat pipe cooling, which corresponds to around 10 % decrease compared to the reference module temperature. Consequently the conversion efficiency and the power output of the module cooled with thermosyphon heat pipes are fairly improved as compared to the reference module. [ABSTRACT FROM AUTHOR]

Purpose: The purpose of this paper is to evaluate the reliability and signature reliability of solar panel k-out-of-n-multiplex system with the help of universal generating function. Design/methodology/approach: Energy scarcity and global warming issues have become important concerns for humanity in recent decades. To solve these problems, various nations work for renewable energy sources (RESs), including sun, breeze, geothermal, wave, radioactive and biofuels. Solar energy is absorbed by solar panels, referred to as photovoltaic panels, which then transform it into electricity that can be used to power buildings or residences. Remote places can be supplied with electricity using these panels. Solar energy is often generated using a solar panel that is connected to an inverter for power supply. As a result, a converter reliability evaluation is frequently required. This paper presents a study on the reliability analysis of k-out-of-n systems with heterogeneous components. In this research, the universal generating function methodology is used to identify the reliability function and signature reliability of the solar array components. This method is commonly used to assess the tail signature and Barlow-Proschan index with independent and identically distributed components. Findings: The Barlow-Proschan index, tail signature, signature, expected lifetime, expected cost and minimal signature of independent identically distributed are all computed. Originality/value: This is the first study of solar panel k-out-of-n-multiplex systems to examine the signature reliability with the help of universal generating function techniques with various measures. [ABSTRACT FROM AUTHOR]

A solution to increase the electrical output of the photovoltaic systems relies on solar tracking mechanisms that increase the amount of received solar energy. The experimental results obtained during a monitoring period of one year are comparatively presented in the paper for five types of photovoltaic modules installed on a fixed platform (as reference) and on a dual-axis solar tracking platform in the Renewable Energy Systems and Recycling R&D Centre of the Transilvania University of Brasov, Romania. The influence of the solar-tracking mechanism and the meteorological conditions specific to the four seasons during the monitoring period on the output of the analysed photovoltaic technologies are discussed in the paper. The solar tracking increases by 28% the amount of the yearly received solar energy and by 29.6% the electrical energy output of the entire PV platform. The solar conversion efficiency of the tracked PV platform is slightly increased (14.34%) when compared with the fixed one (14.17%). When assessing the influence of solar tracking on each type of PV, the results show that the CIGS PV module has the highest relative energy gain (34%) followed by CIS (30.8%), m-Si (30.6%), p-Si (27.3%) and CdTe (23.4%) PV modules. [ABSTRACT FROM AUTHOR]

The reduction of energy demand in buildings is one of the key challenges in contemporary construction. To this end, the application of structural and material partitioning solutions that provide a high level of thermal insulation and the employment of technical installations with high energy performance have become widespread. However, there are a number of other factors that can reduce energy demand. These include the optimal use of heat gains from solar radiation. An aspect that is often discussed in the literature is the overheating of buildings due to excessive heat gains from solar radiation. This article is a case study showing the impact of the orientation of a single-family passive house on its heating energy demand. The building under consideration is located in Central Europe. External climate parameters measured directly at the site during experimental examinations were used for the calculations. This paper adopts six calculation options, considering the different orientations of the glazed façade. As the simulations showed, the effect of solar radiation on the energy demand between two extreme options of glazing orientation, that is south and north-facing orientation, reached 4.7% of the annual energy demand for heating, while for the option corresponding to the actual location of the building and the option involving south-facing windows, the difference was 0.3%, respectively. [ABSTRACT FROM AUTHOR]

In the early stages of building design, decisions are made about the building's form and envelope, but designers rarely base their decisions on sophisticated energy simulations, even though these features are critical to a building's energy performance. This paper employs three methods—empirical, parametric, and uncertainty—to assess the interconnectedness of building form, envelope, orientation, and occupancy regarding thermal comfort and energy consumption for heating and cooling a residential building across three regions: Gdyel (mediterranean climate), Oum El Bouaghi, and Constantine (semi-arid climate). The study variables include indoor air temperature, relative humidity, and energy consumption. The initial findings stem from an experiment conducted in an apartment on the top floor of a building in Gdyel, which allowed us to record the evolution of the variables mentioned throughout the year and validate the parametric results of the multi-zone model created in TRNSYS16 software. This study showed that for the considered climates, a compact form is more suitable; it was found that the top floor with SF = 0.57 needs about 30% to 54% more energy than the inter-floor with SF = 0.21. In addition, the heating and cooling methods and habits adopted by Algerian households are responsible for 18% to 35% on the top floor and the inter-floor, respectively. [ABSTRACT FROM AUTHOR]

A considerable penetration of rooftop PV generation and increasing demand for heating loads will enlarge the peak-to-valley difference, imposing a great challenge to the reliable operation of distribution systems under cold climates. The objective of this paper is to establish a distributionally robust demand response (DR) model for building energy systems for suppressing peak-to-valley load ratios by exploiting cooperative complementarity and flexible transformation characteris-tics of various household appliances. The thermodynamic effect of buildings is modeled for harvesting intermittent renewable energy sources (RESs) on the building roof in the form of thermal energy storages to reduce RES curtailments and eliminate thermal comfort violations in cold weather. Furthermore, the Wasserstein metric is adopted to develop the ambiguity set of the uncertainty probability distributions (PDs) of RESs, and thus, only historical data of RES output is needed rather than prior knowledge about the actual PDs. Finally, a computationally tractable mixed-integer linear programming reformulation is derived for the original distributionally robust optimization (DRO) model. The proposed DRO-based DR strategy was performed on multiple buildings over a 24 h scheduling horizon, and comparative studies have validated the effectiveness of the proposed strategy for building energy systems in reducing the peak/valley ratio and decreasing operation costs. [ABSTRACT FROM AUTHOR]

Socialist modernist architecture in the Balkan has left a valuable legacy of remarkable buildings from this century, which brought a mixture of new experiences and local traditions. Unfortunately, after the 1990s, many of these buildings have been neglected, improperly treated, or abandoned. This paper focuses on the iconic socialist modernist office building "Rilindja" in Prishtina, Kosovo, which was built in 1979. In 2010, the building envelope was changed in the name of revitalization, without considering the energy aspect. The study aims to present energy performance analysis through cost-optimal renovation measures of the building envelope while restoring the architectural values before the last renovation. Using Archicad and EcoDesigner STAR, a BIM model was created, and energy analysis was conducted. The findings indicate that eighteen proposed energy efficiency measures can achieve a reduction in energy consumption for heating and cooling of more than 80% over the life cycle period of 20 years. The comparison before and after renovation considering restoring and preserving the inherent values, while integrating energy efficiency measures was necessary, as there is a lack of such studies in the general literature. Finally, the potential of restoring the collective memory through cost-optimal analysis is emphasized as an approach for similar cases. [ABSTRACT FROM AUTHOR]

Solar has confirmed its dominance among all power generation technologies, and along with the demand for zero-emission buildings, Photovoltaics (PV) is contributing to transforming the building skin. More than 200 products for Building Integrated Photovoltaics (BIPV) are commercialized nowadays in the EU market. However, only 1–3% of all PV installations are BIPV due to the weak penetration in the construction sector. At the state of the art, the sector lacks a specific analysis from a construction technology perspective, describing the dynamics and the traits that BIPV innovation articulates on construction and architectural processes. The authors, elaborating a new model from the building technology sector to explore the relationship between PV technology and architectural innovation, aim to identify the main principles, forms, and approaches that describe the structural organization of the "integrability" concept of PV in buildings. This study applies the method to a database of 233 real buildings located in Switzerland, a unique country leading with a 10% BIPV rate on PV installations documented between the years 1997 and 2023. The novel findings of the research suggest the definition of the levels of innovation and the reference traits of the innovative process of BIPV in the Swiss construction sector, which can also be used in other practical applications and contexts. The results of the paper are expected to impact both the scientific academy and the key players from the construction sector, encouraging the adoption of an integrated research and design approach to revolutionize the energy role of building skins with PV. [ABSTRACT FROM AUTHOR]

Photovoltaic (PV) windows have received more and more attention in recent years since their active energysaving advantages. Considering the surface covered with solar cell modules, the indoor daylight environment of PV windows is obviously different with clear glass windows. However, despite many scholars have studied the indoor daylight environment of PV windows, there few investigations study it from the perspective of human subjective visual perception. In this paper, the indoor daylight environment and human visual comfort of building with Cadmium Telluride Photovoltaic (CdTe-PV) window were investigated. Firstly, the parameters of indoor daylight environment and subjective questionnaires in rooms with CdTe-PV window and clear glass window were analyzed respectively. On the basis of this, combined with indoor working surface illuminance and results of subjective questionnaires, the daylight illuminance threshold of human visual comfort was investigated by the method of Mean Bias Degree (MBD). Finally, an evaluation model for indoor daylight environment of buildings with CdTe-PV window was developed by Fuzzy Comprehensive Evaluation Method. The results showed that the working surface illuminance of CdTe-PV window was lower than that of clear glass room, the CCT of different windows room had a minor gap and the CdTe-PV window room was closer to the recommended range that was 3300-5000K. As for CRI, both the CdTe-PV window room and the clear glass room could meet the visual comfort requirements of office staff. Furthermore, it was found that the requirement of human visual comfort was met when indoor working surface illuminance varies between 500-2200lx in the room with CdTe-PV window. At last, according to the comprehensive evaluation model proposed in this paper, it was found that the indoor daylight environment of buildings with CdTe-PV window was excellent in the present experiment. [ABSTRACT FROM AUTHOR]

Interlocking Inter-Module Connections (IMCs) in Modular Steel Buildings (MSBs) have garnered significant interest from researchers. Despite this, the optimisation of plate thicknesses in such structures has yet to be extensively explored in the existing literature. Therefore, this paper focuses on optimising the thickness of interlocking IMCs in MSBs by leveraging established experimental and numerical simulation methodologies. The study developed various numerical models for IMCs with plate thicknesses of 4 mm, 6 mm, 10 mm, and 12 mm, all subjected to compression loading conditions. The novelty of this study lies in its comprehensive parametric analysis, which evaluates the slip prediction model. A random forest regression model, trained using the 'TreeBagger' function, was also implemented to predict slip values based on applied force. Sensitivity analysis and comparisons with alternative methods underscored the reliability and applicability of the findings. The results indicate that a plate thickness of 11.03 mm is optimal for interlocking IMCs in MSBs, achieving up to 8.08% in material cost reductions while increasing deformation resistance by up to 50.75%. The 'TreeBagger' random forest regression significantly enhanced slip prediction accuracy by up to 7% at higher force levels. [ABSTRACT FROM AUTHOR]

This paper takes a low-energy building in Changchun, China, as an object to test and study the characteristics of two heating modes, AC/DC (Alternative current/Direct current) switching and AC/DC synthesis, from the perspectives of temperature change, irradiation intensity, power generation, electricity consumption, etc. Firstly, the experimental research was conducted under two heating cable modes by establishing mathematical models and a test rig, and it was found that the photoelectric conversion efficiency on sunny, cloudy, and overcast days was 18%, 14.5%, and 12%, respectively. A simulation model was established by TRNSYS to run an ultra-low-energy building throughout the year. It was found that the highest and lowest monthly power generation occurred in February and July, respectively. The annual power generation of the system was 6614 kWh, and the heating season power generation was 3293.42 kWh. In the current research, the DC electricity consumption was slightly higher than the AC electricity consumption. Under conditions of similar radiation intensity and power generation, the indoor temperature of the AC/DC synthesis cable heating mode were 1.38% higher than the AC/DC switching heating able mode, and the electricity consumption were 10.9% and 4.76% higher, respectively, than those of the AC switching heating cable mode. This is of great significance for clean-energy heating, energy savings, and emissions reduction in northern China. [ABSTRACT FROM AUTHOR]

This paper details the comprehensive activities conducted in a laboratory setting to assess the structural health monitoring (SHM) of prefabricated building envelopes. Integrating sensors into building components like curtain wall facades poses challenges but offers opportunities for monitoring structural health, requiring compliance with regulatory standards. The research investigates the possibility of defining a kit of conventional and multi-parameter sensors integrated within the building envelope to monitor its behavior during the performance test conducted. The kit of sensors also includes Fiber Optic Sensors for effectively monitoring building envelope behavior and structural integrity. In this context, the European project InComEss (H2020-GA862597) aims to define a stand-alone solution for SHM using Piezoelectric Energy Harvesting Systems (PE-EHS) for façade monitoring through FBG/FOS system. After analyzing the main façade structural stress, a series of FBGs, accelerometers, and force washers were integrated within a 1:1 scale façade prototype and tested in a laboratory following the test sequence parameters required by the curtain wall standard EN 13830. The data collected were analyzed with the aim of monitoring the façade behavior before and after the tests. The results show that the façade's performance passed the assessing test criteria without reporting any damages. In addition, the outcomes demonstrated the effectiveness of the defined kit of multi-parameter sensors for the building envelope's SHM. [ABSTRACT FROM AUTHOR]

This paper describes the control of temperature rise in photovoltaic panels by using wickless heat pipe cooling technique. These heat pipes take the help of gravity for circulation of their working fluid without using a wick structure. For current thermal management study, two solar panels of same dimensions and two identical gravity assisted wickless heat pipes are designed and fabricated. One of the panels is cooled by using these two heat pipes. Other panel, without heat pipes is used for performance comparison purpose and has been designated as the reference module. In order to have the same operating conditions, these panels have been installed together. Experimental parameters such as voltage, current from both panels, module temperatures along with solar irradiance and ambient temperature are recorded with the help of a data logger. For this study, minute wise data of various parameters have been recorded for the test period of 9 AM to 5 PM, since solar radiation intensity is high during this time period. Actual data tabulation for the analysis has been done at 15 minute intervals. The comparative analysis for each panel has been carried out for various dates and has been presented in this paper. A significant drop in temperature of around10%, corresponding to a temperature reduction of5.96°C, has been estimated in the operating temperature of photovoltaic module equipped with wickless heat pipes. Further, due to the thermal management, in this study, the optimum enhancement in photoelectric conversion efficiency is found to be 7.69%, with 15.4% of panel with cooling and 14.3% of panel without cooling. Similarly optimum improvement of 4.03% in power output has been recorded with 27.09 W from panel with cooling and 26.04 W from the panel with no cooling. The outcomes of this experimental study are highly encouraging in the field of photovoltaics. [ABSTRACT FROM AUTHOR]

Purpose: The aim of this paper is to show the problem of adaptation of Demand Side Respond programs to the new market of renewable energy prosumers and to indicate the possibilities and proposals for these adaptations taking into account the current legislation and available solutions such as energy consumption monitoring, energy storage and control of energy consumption with Smart Home solutions. Design/methodology/approach: The aim of the paper was achieved by analyzing the literature on Demand Side Respond, analyzing the current legislation and analyzing the specifics of prosumer behavior. Findings: As a result of the analysis, problems related to the adaptation of Demand Side Respond programs for prosumers of energy from renewable sources (especially from PV installations) were indicated and possible solutions were proposed. Research limitations/implications: Future research will address the development of a set of recommendations for prosumers to optimize their behavior and ultimately contribute to the proper management of energy from PV installations. Originality/value: The article presents an important issue in the growing renewable energy market resulting from the new prosumer billing system that came into effect on April 1, 2022. [ABSTRACT FROM AUTHOR]

Lessons from recent earthquakes have provided a tough reality check of the traditional seismic design approach and technologies, highlighting the urgent need for a paradigm shift of performance‐based design criteria and objectives toward low‐damage design philosophy and technologies for the whole building system. Modern society is asking for "earthquake proof" resilient buildings that are able to withstand seismic events without compromising their functionality. The EU‐funded SERA (Seismology and Earthquake Engineering Research Infrastructure Alliance for Europe Project) project discussed in this paper provided the opportunity to develop and validate within the European context an integrated seismic low‐damage prototype, including main structure and non‐structural elements, for the next generation of high‐performance buildings. This paper presents an overview of the research, involving three‐dimensional shake table tests of a two‐storey 1:2 scaled timber‐concrete post‐tensioned dissipative low‐damage structure "dressed" by earthquake‐resistant gypsum/masonry partitions and glass/concrete facades. Specimen details, construction and assembly phases, test setup, and experimental results are discussed. After many cycles of input motions at increasing levels of seismic intensity (higher than Collapse Prevention Limit State), the integrated building system exhibited a very high seismic performance. The experimental campaign carried out at the National Laboratory of Civil Engineering in Lisbon confirmed the unique potential of low‐damage technologies and the opportunity for their widespread implementation into design practice. [ABSTRACT FROM AUTHOR]

Currently, there are strong and sustained growth trends observed in multi-disciplinary industrial technologies such as building-integrated photovoltaics and agrivoltaics, where renewable energy production is featured in building envelopes of varying degrees of transparency. Novel glass products can provide a combination of thermal energy savings and solar energy harvesting, enabled by either patterned-semiconductor thin-film energy converters on glass substrates, or by using luminescent concentrator-type approaches to achieve high transparency. Significant progress has been demonstrated recently in building integrated solar windows featuring visible light transmission of up to 70%, with electric power outputs of up to Pmax ~ 30–33 Wp/m2. Several slightly different designs were tested during 2021–2023 in a greenhouse installation at Murdoch University in Perth, Western Australia; their long-term energy harvesting performance differences were found to be on the scale of ~10% in wall-mounted locations. Solar greenhouse generated electricity at rates of up to 19 kWh/day, offsetting nearly 40% of energy costs. The objective of this paper is to report on the field performance of these PV windows in the context of agrivoltaics and to provide some detail of the performance differences measured in several solar window designs related to their glazing structure materials. Methods for the identification and quantification of long-term field performance differences and energy generation trends in solar windows of marginally different design types are reported. The paper also aims to outline the practical application potential of these transparent construction materials in built environments, focusing on the measured renewable energy figures and seasonal trends observed during the long-term study. [ABSTRACT FROM AUTHOR]

Solar power systems, such as photovoltaic (PV) systems, have become a necessary feature of zero-energy buildings because efficient building design and construction materials alone are not sufficient to meet the building's energy consumption needs. However, solar power generation is subject to fluctuations based on weather conditions, and these fluctuations are higher than other renewable energy sources. This phenomenon has emphasized the importance of predicting solar power generation through weather forecasting. In this paper, an Automatic Machine Learning (AML)-based method is proposed to create multiple prediction models based on solar power generation and weather data. Then, the best model to predict daily solar power generation is selected from these models. The solar power generation data used in this study was obtained from an actual solar system installed in a zero-energy building, while the weather data was obtained from open data provided by the Korea Meteorological Administration. In addition, To verify the validity of the proposed method, an ideal data model with high accuracy but difficult to apply to the actual system and a comparison model with a relatively low accuracy but suitable for application to the actual system were created. The performance was compared with the model created by the proposed method. Based on the validation process, the proposed approach shows 5–10% higher prediction accuracies compared to the comparison model. [ABSTRACT FROM AUTHOR]

Purpose: Life cycle assessment (LCA) is a widely used method for the evaluation of buildings' environmental impacts, but these analyses contain high levels of uncertainty. Decarbonization of electricity production is key to reach climate goals, influencing all sectors including construction The objective of this paper is to study the sensitivity of the environmentally optimum building design solution to a changing electricity mix to assist decision-making. Methods: In this paper, multi-objective optimization was applied to minimize the life cycle global warming potential and life cycle costs of a building at the same time, using dynamic energy simulation and LCA. The variables include building envelope parameters such as window ratio, insulation type and thickness in a typical new multi-family apartment building heated with a heat pump. A static, largely fossil-based electricity mix and a dynamic, gradually decarbonizing alternative are considered, as well as two electricity price increase scenarios. New metrics have been introduced to explore the results and describe the Pareto-optimal solutions, for example the improvement potential to contextualize the achievements through the optimization. Results and discussion: The results show that, with the current electricity mix, building envelope optimization can improve the design by 18% on average in terms of the life cycle greenhouse gas emissions compared to typical new designs and by 10% with a dynamic mix in Hungary. With today's static electricity mix, the optimization proved that the minimum energy efficiency requirements in force are close to cost optimality. However, from an environmental point of view, much higher insulation thicknesses have been shown as justified (U-values of less than 0.1 W/m2K). Conclusions: Optimization of building design based on LCA is still not widely applied and the effect of a decarbonizing electricity mix on the optimum has not been studied before. The results of the paper demonstrate the importance of this question. Optimal solutions are different depending on the applied mix but an energy-efficient building envelope remains important: today's cost-optimal building envelope proves to be both cost- and environmentally optimal in the long run. [ABSTRACT FROM AUTHOR]

In order to address the issue of a solar utilization system with low efficiency, this paper designs a new solar conversion system based on photovoltaic concentration and spectral splitting. The system concentrates sunlight through a Fresnel lens and uses a hollow concave cavity to evenly distribute the incident energy flow. The spectral splitting medium separates the useful irradiance for the PV cell from those wavelengths that are more suited to heat generation. By considering the available wavelength of photovoltaic cells, the GaAs cell and a ZnO nanofluid were selected for this paper. It was found that installing the hollow concave cavity improved the spot uniformity of the PV cell surface by 17%. The output efficiency of the system under various circumstances was analyzed. The results show that at a concentration ratio of 50 and a light intensity of 1000 W/m2, photoelectric conversion efficiency increased by 0.81%. When compared to direct concentration, the photoelectric conversion efficiency increased by at least 7%. Meanwhile, the comprehensive electrical efficiency was 36.7%, which is higher than that of the normal concentration PV and comprehensive thermal system. [ABSTRACT FROM AUTHOR]

The efficient integration of distributed energy resources (DERs) in buildings is a challenge that can be addressed through the deployment of multienergy microgrids (MGs). In this context, the Interreg SUDOE project IMPROVEMENT was launched at the end of the year 2019 with the aim of developing efficient solutions allowing public buildings with critical loads to be turned into net-zero-energy buildings (nZEBs). The work presented in this paper deals with the development of a predictive energy management system (PEMS) for the management of thermal resources and users' thermal comfort in public buildings. Optimization-based/optimization-free model predictive control (MPC) algorithms are presented and validated in simulations using data collected in a public building equipped with a multienergy MG. Models of the thermal MG components were developed. The strategy currently used in the building relies on proportional–integral–derivative (PID) and rule-based (RB) controllers. The interconnection between the thermal part and the electrical part of the building-integrated MG is managed by taking advantage of the solar photovoltaic (PV) power generation surplus. The optimization-based MPC EMS has the best performance but is rather computationally expensive. The optimization-free MPC EMS is slightly less efficient but has a significantly reduced computational cost, making it the best solution for in situ implementation. [ABSTRACT FROM AUTHOR]

The mechanical analysis of photovoltaics and building integrated photovoltaics is a key step for their optimal design and certification, and requires careful consideration, alongside solar power, durability and functionality issues. The solar cells are encapsulated in thin interlayers that are usually composed of a viscoelastic Ethylene–Vinyl Acetate compound, and protected by thin glass and/or plastic layers. This paper investigates the out-of-plane bending response of a full-scale commercial PV module and focuses attention on the shear bonding efficiency of the thin encapsulant for quasi-static and dynamic mechanical considerations. The parametric analytical analysis, carried out in this study for a laminated glass plate, highlights the possible consequences of the viscoelastic shear coupling on the cross-section load-bearing demand in the covers. As a direct effect of severe operational conditions (i.e., ageing, non-uniform/cyclic thermal gradients, humidity, extreme mechanical/thermal loads, etc.) the shear rigidity and adhesion of these films can suffer from repeated/progressive modification and even degradation, and thus induce major stress and deflection effects in the out-of-plane mechanical response of the PV module components. The minimum shear bond efficiency required to prevent mechanical issues is calculated for various configurations of technical interest. Accordingly, it is shown how the quasi-static and dynamic mechanical performance of the system modifies as a function of a more rigid or weak shear coupling. [ABSTRACT FROM AUTHOR]

Photovoltaic power generation can directly convert solar energy into electricity, but most of the solar energy absorbed by the photovoltaic panel is converted into heat, which significantly increases the operating temperature leading to a reduction in the power generation efficiency of the panels. To reduce the working temperature of photovoltaic panels and improve the photoelectric conversion efficiency, this paper installs aluminum fins and air channels at the traditional photovoltaic cell back sheets and cools them with forced-circulation cooling through fans. The relationships between fin spacing, fin height, air channel inlet wind speed and panel temperature, power generation, and electrical efficiency were investigated. The results show that the temperature of the photovoltaic panel decreases and then increases with the decrease of the fin spacing during natural convection and gradually decreases with the increase of the fin height. The use of forced-circulation cooling technology can effectively reduce the PV panel temperature and increase the net power generation. When the solar radiation intensity is 1000 W/m2, the ambient temperature is 35°C, the fin spacing is 6 mm, the height is 80 mm, the inlet wind speed is 1 m/s, the net generating power reaches the maximum value, and the net generating power and the electrical efficiency are increased by 14.6% and 2.25%, respectively. [ABSTRACT FROM AUTHOR]

The transition to sustainable transportation has fueled the need for innovative electric vehicle (EV) charging solutions. Building Integrated Photovoltaics (BIPV) systems have emerged as a promising technology that combines renewable energy generation with the infra‐structure of buildings. This paper comprehensively reviews the BIPV system for EV charging, focusing on its technology, application, and performance. The review identifies the gaps in the existing literature, emphasizing the need for a thorough examination of BIPV systems in the context of EV charging. A detailed review of BIPV technology and its application in EV charging is presented, covering aspects such as the generation of solar cell technology, BIPV system installation, design options and influencing factors. Furthermore, the review examines the performance of BIPV systems for EV charging, focusing on energy, economic, and environmental parameters and their comparison with previous studies. Additionally, the paper explores current trends in energy management for BIPV and EV charging, highlighting the need for effective integration and recommending strategies to optimize energy utilization. Combining BIPV with EV charging provides a promising approach to power EV chargers, enhances building energy efficiency, optimizes the building space, reduces energy losses, and decreases grid dependence. Utilizing BIPV‐generated electricity for EV charging provides electricity and fuel savings, offers financial incentives, and increases the market value of the building infrastructure. It significantly lowers greenhouse gas emissions associated with grid and vehicle emissions. It creates a closed‐loop circular economic system where energy is produced, consumed, and stored within the building. The paper underscores the importance of effective integration between Building Integrated Photovoltaics (BIPV) and Electric Vehicle (EV) charging, emphasizing the necessity of innovative grid technologies, energy storage solutions, and demand‐response energy management strategies to overcome diverse challenges. Overall, the study contributes to the knowledge of BIPV systems for EV charging by presenting practical energy management, effectiveness and sustainability implications. It serves as a valuable resource for researchers, practitioners, and policymakers working towards sustainable transportation and energy systems. [ABSTRACT FROM AUTHOR]

Accurate photovoltaic (PV) identification is critical for the effective and healthy development of PV industry. PV recognition is hampered by the complex background and variable shape and color of PV panels in high-resolution remote sensing images. This paper proposes a method for accurately extracting photovoltaic land from high-resolution remote sensing images. The encoder and decoder functions in this network combine multi-layer features to combine rich semantic data. Important spatial and channel properties are captured using the global convolution and the dual attention mechanism, while some lost channel data are recovered using the channel fusion module. The proposed method can effectively solve the problems of photovoltaic panel blurred edges and adhesion. Experiments on open PV datasets show that the IoU of the proposed method in PV01, PV03, and PV08 is 87.02%, 92.98%, and 88.43%, respectively, when compared to U-Net, SegNet, DeepLabv3, and DeepLabv3+. Experimental results show that the proposed method can achieve high accuracy segmentation of photovoltaic panels in high-resolution remote sensing images. [ABSTRACT FROM AUTHOR]

Digital twin (DT) is a prolific buzzword in this era, where digitization plays a significant role. The perception of solar energy harvesting has been gaining popularity with the advent of solar panels. Solar asset maintenance is a need of the hour for investors because of the smart city scheme and green building certificate evaluation for all industries, educational institutions, etc. Among the list of factors that reduce PV system efficiency, the issue of partial shading is a vital distress that must be resolved. This paper focuses on the development of a digital twin framework that is proactively driven by shading patterns and a proposed optimization-based reconfiguration embedded controller that electronically relocates the panel in the physical world. The real-time system has been created for a three-by-three series parallel panel arrangement. The proposed switching matrix controller achieves the maximum power, i.e., 40% of increased power output, row current difference is made almost zero from 3 to 4 A, and fill factor increases by 20% by reconfiguring the solar array. It is done based on a decision taken by a nature-inspired (equal irradiation distribution algorithm) or puzzle-based (skyscraper) optimization algorithm. Switching matrix controllers overcome the disadvantages of physical relocation. The users can query the digital twin build to know the historical performance and current operating conditions of the system. It can trigger alarms as early warnings and make predictions about possible system anomalies, if and when they occur using a digital twin. [ABSTRACT FROM AUTHOR]

Photovoltaic (PV) panels are prone to experiencing various overlays and faults that can affect their performance and efficiency. The detection of photovoltaic panel overlays and faults is crucial for enhancing the performance and durability of photovoltaic power generation systems. It can minimize energy losses, increase system reliability and lifetime, and lower maintenance costs. Furthermore, it can contribute to the sustainable development of photovoltaic power generation systems, which can reduce our reliance on conventional energy sources and mitigate environmental pollution and greenhouse gas emissions in line with the goals of sustainable energy and environmental protection. In this paper, we provide a comprehensive survey of the existing detection techniques for PV panel overlays and faults from two main aspects. The first aspect is the detection of PV panel overlays, which are mainly caused by dust, snow, or shading. We classify the existing PV panel overlay detection methods into two categories, including image processing and deep learning methods, and analyze their advantages, disadvantages, and influencing factors. We also discuss some other methods for overlay detection that do not process images to detect PV panel overlays. The second aspect is the detection of PV panel faults, which are mainly caused by cracks, hot spots, or partial shading. We categorize existing PV panel fault detection methods into three categories, including electrical parameter detection methods, detection methods based on image processing, and detection methods based on data mining and artificial intelligence, and discusses their advantages and disadvantages. [ABSTRACT FROM AUTHOR]

In this paper, a detailed model of a photovoltaic (PV) panel is used to study the accumulation of dust on solar panels. The presence of dust diminishes the incident light intensity penetrating the panel's cover glass, as it increases the ref lection of light by particles. This phenomenon, commonly known as the "soiling effect", presents a significant challenge to PV systems on a global scale. Two basic models of the equivalent circuits of a solar cell can be found, namely the single-diode model and the two-diode models. The limitation of efficiency data in manufacturers' datasheets has encouraged us to develop an equivalent electrical model that is efficient under dust conditions, integrated with optical transmittance considerations to investigate the soiling effect. The proposed approach is based on the use of experimental current-voltage (I-V) characteristics with simulated data using MATLAB/Simulink. Our research outcomes underscores the feasibility of accurately quantifying the reduction in energy production resulting from soiling by assessing the optical transmittance of accumulated dust on the surface of PV glass. [ABSTRACT FROM AUTHOR]

Prefabricated modules are being used to renovate the building envelope. However, compared to manual methods, the design and prefabricated module's definition is time consuming. Therefore, it is necessary to improve the efficiency of the prefabricated layout definition processes by incorporating automation and computational design. The purpose of this paper is to present a semi-automated definition of the layout of the prefabricated modules with the only input of the existing building facade being the Point Cloud. In this research, a novel step-by-step workflow was developed. More precisely, an algorithm was developed that processes the coordinates of each point of the cloud and generates the layout of the prefabricated modules. To validate the workflow and the algorithm, four facades were tested, considering two parameters: (a) working time and (b) output accuracy. According to the results, it was concluded that spending more time achieving an accurate laser data acquisition can be a good strategy to obtain the primary layout with sufficient precision. [ABSTRACT FROM AUTHOR]

Photovoltaic panels play a pivotal role in the renewable energy sector, serving as a crucial component for generating environmentally friendly electricity from sunlight. However, a persistent challenge lies in the adverse effects of rising temperatures resulting from prolonged exposure to solar radiation. Consequently, this elevated temperature hinders the efficiency of photovoltaic panels and reduces power production, primarily due to changes in semiconductor properties within the solar cells. Given the depletion of limited fossil fuel resources and the urgent need to reduce carbon gas emissions, scientists and researchers are actively exploring innovative strategies to enhance photovoltaic panel efficiency through advanced cooling methods. This paper conducts a comprehensive review of various cooling technologies employed to enhance the performance of PV panels, encompassing water-based, air-based, and phase-change materials, alongside novel cooling approaches. This study collects and assesses data from recent studies on cooling the PV panel, considering both environmental and economic factors, illustrating the importance of cooling methods on photovoltaic panel efficiency. Among the investigated cooling methods, the thermoelectric cooling method emerges as a promising solution, demonstrating noteworthy improvements in energy efficiency and a positive environmental footprint while maintaining economic viability. As future work, studies should be made at the level of different periods of time throughout the years and for longer periods. This research contributes to the ongoing effort to identify effective cooling strategies, ultimately advancing electricity generation from photovoltaic panels and promoting the adoption of sustainable energy systems. [ABSTRACT FROM AUTHOR]

The increasing demand for energy-efficient and sustainable solutions in the building sector has driven the need for innovative approaches that integrate renewable energy sources and advanced control systems. This paper presents an integrated energy management solution for solar-powered smart buildings, combining a multifaceted physical system with advanced IoT- and cloud-based control systems. The physical system includes a heat pump, photovoltaics, solar thermal panels, and an innovative low-enthalpy radiant wall and ceiling, providing self-sufficient heating and cooling. The control system makes use of advanced IoT and communication engineering technologies, using Modbus, HTTP, and MQTT protocols for seamless interconnectivity, monitoring, and remote management. The successful implementation of this solution in an average-sized model house in Paris and a deep energy retrofit of a semidetached single-family house in Oviedo, northern Spain, demonstrates increased energy efficiency, improved thermal comfort, and reduced environmental impact compared with conventional alternatives. This study illustrates the potential of integrating solar energy, IoT, and communication technologies into smart buildings, contributing to the global effort to reduce the environmental impact of the building sector. [ABSTRACT FROM AUTHOR]

The integration of photovoltaic (PV) and thermoelectric (TE) modules in PV-TE systems has shown potential for expanding the utilization of the solar spectrum, enhancing the total power output, and reducing the space that is required for PV power plants. This paper discusses the characteristics of a practical PV-TE system model. Typically, to boost the power output of the TE component, a significant temperature difference is induced across the thermoelectric generator (TEG) module using various heat removal methods. These cooling techniques not only enhance the TEG module's efficiency but may also improve the performance of the PV component. In this study, we evaluate the efficiencies of PV-TE systems that are equipped with polycrystalline silicon solar cells and seven distinct TEGs under four different conditions. Initially, the PV-TE hybrid systems are tested without a cooling mechanism at an ambient temperature of 25 °C (Standard Test Conditions EN/IEC 61215). Subsequently, we examine the systems with a passive cooling approach, employing aluminum heat sinks to facilitate improved heat dissipation. Further tests involve an active cooling system using water and then nanofluid as coolants. The results from these assessments aim to establish a benchmark for enhancing the efficiency of future PV-TE systems. [ABSTRACT FROM AUTHOR]

In connection with renewable energy sources, the courtyards of the buildings provide space for the installation of agrivoltaics for sustainable development. This paper proposes the use of courtyards of low-rise buildings for agrivoltaics. This will increase the area for installing photovoltaic systems, which have so far only been installed on roofs or facades or on open fields. The advanced design of the photovoltaic systems will enable the dual use of the area both for the cultivation of crops and for the production of electricity at the same time. The increased amount of electricity produced in photovoltaic systems also contributes to reducing the carbon footprint. On the courtyard as well as on the open fields, it is possible to grow agricultural crops between rows of photovoltaic panels. The partial shading of seedlings during summer sunny days reduces their heat stress and slows down soil drying. Solar eclipses are rare, but their impact on electricity generation is significant. We evaluated the measured data and we assessed the electricity production and the influence of a solar eclipse on the electricity production in photovoltaic power plants in the Czech Republic. The daily loss in production depends on the size of the eclipse. A comparison of the annual electricity production in two selected PV power plants with the expected values according to PVGIS testifies to the quality of the construction and the PV panels used in both power plants. [ABSTRACT FROM AUTHOR]

Copyright of Young Science / Mladá Veda is the property of Vydavatelstvo Universum and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

An analytical hierarchy model of the impact of solar reflectance, thermal emittance, heat transfer coefficient, and heat storage coefficient on building energy consumption was established through the implementation of orthogonal design experiments. The EnergyPlus software (v9.0.1) was utilized to simulate building energy consumption across diverse climatic regions in China, providing essential benchmarks for the orthogonal design. The results of the range analysis consistently indicate that, barring regions characterized by extremely cold climates, solar reflectance emerges as the predominant factor exerting an influence on building energy consumption. As geographical latitude increases, the impact of the heat transfer coefficient becomes progressively larger, while the weight of thermal reflectance concurrently diminishes. Drawing upon the principles rooted in the gradient refractive rate theory and the concept of atmospheric window radiation, a range of high-reflectance and high-emittance cool roof coatings in various colors were meticulously developed. A spectrophotometer was employed to precisely quantify their reflectance properties, and simulations were subsequently conducted to scrutinize their energy-saving characteristics. The results demonstrate that the cool roof coatings that were developed using the methodology described in this paper exhibit substantial enhancements in reflectance, with increases of 0.24, 0.25, 0.37, and 0.35 for the yellow, red, blue, and green cool roofing materials, respectively, in comparison to conventional colored coatings. Under typical summer conditions, these enhancements translate to significant reductions in roof temperatures, ranging from 9.4 °C to 14.0 °C. Moreover, the simulations exploring the cooling loads for the roofs of differing colors consistently revealed remarkable energy savings. These savings were quantified to be 4.1%, 3.9%, 5.5%, and 5.4%, respectively, when compared to conventional coatings of the corresponding colors. These findings offer valuable insights into strategies for optimizing the energy efficiency of buildings through the application of high-reflectance cool roofing materials. [ABSTRACT FROM AUTHOR]

The visual comfort of building occupants may be directly affected by stochastic modulation of shading. In this paper, simulations combined with statistical analysis were used to investigate and evaluate the visual comfort of different seating positions in an office. The dynamic daylighting indicators (UDI, DGP, sDA, and ASE) were used to analyze the visual comfort within an office. The main findings show the following: (1) The DGP and ASE metrics show that the probability of glare in positions near windows is not always the highest. The influence of line-of-sight direction should also be considered. (2) By running 50 simulations, the average value of sDA300/50% was 0.97, and the average value of ASE1000/250 was 11.4%. This shows that the office has good daylighting quality. (3) The optimal visual comfort positions were determined based on four indicators, and alternative options for different indoor occupant preferences were provided. The research results of this paper aim to provide references for the improvement of visual comfort of office occupants. [ABSTRACT FROM AUTHOR]

Compared with monofacial photovoltaic, bifacial photovoltaic modules can absorb the irradiance on both sides, thereby obtaining more electricity revenue, which can meet more demands. In order to further improve the electrical efficiency of bifacial photovoltaic, this paper proposes a bifacial photovoltaic module with adjustable inclination for simulation and experimental research, which can be well combined with architecture. Under the conditions of different inclination, orientations and heights, the output performance of the bifacial photovoltaic module is analyzed. Under the best inclination, the annual electrical energy of bifacial photovoltaic is about 9.4% higher than that of monofacial photovoltaic. When the spacing between the bifacial photovoltaic and the wall is 1-1.5 times the size of the photovoltaic, the electrical energy will increase the most. Considering the influence of wall color on bifacial photovoltaic performance, the photovoltaic electrical energy under the white wall can reach up to 35% higher than that with respect to the concrete color (dark grey). [ABSTRACT FROM AUTHOR]

Delamination is one of the most critical failure modes of a PV module during service lifetime. Delamination within a backsheet primarily imposes a safety risk, but may also accelerate various other PV module degradation modes. The main aim of this paper is to present a peel test set-up, which is more practical in sample preparation and execution than the width-tapered cantilever beam test and overcomes some issues of standard peel tests like the influence of sample geometry and energy dissipation through deformation on the peel test results. The best results with respect to accuracy and effort were achieved by using a 180° peel geometry where an additional adhesive tape is applied to the peel arm in order to avoid plastic deformation or breakage. The additional support of the adhesive tape leads to comparable peel strength values without any influence of the plastic deformation behavior of the peel arms with different thickness. [ABSTRACT FROM AUTHOR]

Lighting control integrated with daylighting is recognized as an important and useful strategy in energy efficient building design. One of the right factors to reduce energy consumption for artificial lighting during the day is the maximum utilization of sunlight. The aim of this research, distribution of daylight into the building analysis with five models of building facades and value of illuminance in the morning, afternoon and evening with orientation of the window openings to the northeast and southwest. Bank Mega is one of the tall buildings in Makassar Indonesia, which is located in a coastal area that is not blocked by other tall buildings, so this building is the object of research as a basis for designing façade models on building envelopes. The methodology this study is quantitative, analyzing the performance of sunlight as a source of daylighting in office buildings. This paper presents field measurements in office buildings, namely in rooms that are oriented northeast and southwest. The analysis in the two spaces is a reference to determine the effect of sunlight on the orientation of the building. In this study also conducted visual perception experiments by submitting questionnaires to 43 respondents. the results show that there are some complaints for employees, because of the high illuminance value in certain areas. Furthermore, simulate using the Radiance Illuminance Program software to determine the illuminance value of room in the morning, noon and afternoon with five building facade model designs, i.e., massive glass, vertical, horizontal, diagonal, and vertical-diagonal model. The results presented in this paper show that the distribution of daylight in an east-oriented room is higher in the morning than in the evening and noon. Whereas in the southwest orientation it is inversely proportional, the value of light distribution is higher in the afternoon than in the morning and noon. Accordingly, orientation of the building affects distribution of daylight. The massive glass facade model without using sun shading has the highest light distribution value compared to other façade models, but can cause glare and excessive brightness. Furthermore, the second highest distribution of daylight with the vertical facade model, but there are also areas that exceed the standard illuminance level for workspaces, but only in areas near window openings. The combined model of the vertical diagonal facade which also has a high distribution of illuminance value and to redirect daylight deep into building interior simultaneously in the morning, afternoon and evening. Accordingly, façade model on envelope of building affects distribution of daylight. The aesthetic value of architectural design shows that the appearance of the building does not look monotonous or massive, when using the building facade models because there are attractive areas in the building envelope. [ABSTRACT FROM AUTHOR]

This paper proposes an innovative approach to analyse the energy behaviour of complex kinetic shading systems. Although several studies have analysed this topic, many are focused only on certain aspects or on simple shading systems due to a lack of tools for running reliable energy simulations on complex systems. This study aims to develop and validate a tool based on Python and EnergyPlus that can consider the continuous nature of the energy simulation and analyse complex kinetic systems. Simply providing an EnergyPlus model and a model of the shading configurations, the algorithm provides as output a comparison sheet to evaluate the performance of the system. The paper provides a description of the tools and studies focused on this topic; subsequently, a methodological insight is presented to explain the workflow, its validation, and the algorithm developed. Finally, the algorithm is tested on a case study to analyse a kinetic shading system. Abbreviations: DSF: Dynamic Shading File; EDSM: Equivalent Dynamic Shading Model; EMS: Energy Management System; ESSM: Equivalent Static Shading Model; Gf: Incident irradiance; Gf max: Incident irradiance threshold; PV: Photovoltaic; ST1/2/3: State 1/2/3; SSM: Static Shading Model; SF: Sunlit Fraction; SSF: Static Shading File; To: Outdoor temperature; To max 1/2: Outdoor temperature threshold 1/2; Tsol: Solar transmittance [ABSTRACT FROM AUTHOR]