Search

Regarding advanced 5G mobile communication, microwave dielectric ceramics are considered as the most potential materials to develop new-generation base station resonators. Herein, ZnNb 2 O 6 ceramics with ε r of approximately 24 have been prepared using the solid-state reaction method, with tailored extra ZnO of x mol% (x = 1, 2 and 3). We have for the first time applied the P-V-L chemical bond theory to investigate ZnNb 2 O 6 ceramics with ZnO doping, by exploring the relationship of dielectric properties and chemical bond characteristics. Particularly, the Raman spectra demonstrates that the full width at half maximum of υ 1 (A g) vibration mode can exhibit significant correlation with the quality factor (Q × f). To further support the experimental study, we have also conducted the first-principle calculation of electron density difference via CASTEP package, which further confirms the change of temperature coefficient of resonance frequency (τ f). Our newly designed ZnNb 2 O 6 ceramics doped with 1 mol% ZnO exhibit excellent dielectric properties, i.e., ε r = 23.74, Q × f = 102,824 GHz and τ f = −55.38 ppm/°C, which demonstrates great potential to construct miniaturized 5G base station with advanced ceramic dielectrics. [ABSTRACT FROM AUTHOR]

BaO-Sm 2 O 3 –5TiO 2 (BST) added by Al 2 O 3 was prepared by solid-state reaction method. The main phase is Ba 3.99 Sm 9.34 Ti 18 O 54 of orthorhombic tungsten bronze structure, and the secondary phase is Ba 1.18 Al 1.90 Ti 6.09 O 16 of tetragonal structure, which has two types of grains: one is grey and cubic, and the other is white and quasi-rectangular. Microstructure was characterized by XRD, SEM, and Raman spectra. Micromechanical properties of different phases were assessed by nanoindentation and micro-scratch tests with Berkovich indenter. Volume fractions of different phases obtained by statistical analysis of grid indentation are in good agreement with those obtained by XRD analysis. Vickers hardness method is more appropriate for the determination of the fracture toughness of dielectric ceramics. BST ceramic without addition of Al 2 O 3 has better mechanical properties than BST-A with addition of Al 2 O 3 , indicating that addition of Al 2 O 3 impairs the micromechanical properties of dielectric ceramics. [ABSTRACT FROM AUTHOR]