Search

A new target material combination was modelled to replace the existing uranium-aluminium design used for 99Mo manufacture to increase the sustainability of the production process. Previous efforts to develop a more sustainable uranium target for 99Mo production, resulted in the levels of 239Pu in the target after irradiation being elevated due to the increase in 238U present. MCNP6.2 was used to model 4 different cylindrical targets based on 4–7 days irradiation to further understand this effect. To reduce the resultant 239Pu levels, ratios of 0–99% of Ce were used as a replacement for 238U. The results show that the addition of 140Ce and the removal of 238U reduced the 239Pu levels in the target significantly thus increasing the sustainability of the target and giving a slight increase to the 99Mo output of the targets. [ABSTRACT FROM AUTHOR]

The geopolymer catalyst supports utilized in the nuclear waste containers for the Fukushima Daiichi Nuclear Power Station will be required to have high porosity and durability. This work presents the synthesis of a potassium and metakaolin‐based geopolymer and its performance upon dehydration. During water content measurements of the samples, it was seen that in the demolded samples, the water content quickly decreased to less than 30% within 7 days, while the samples that had the cap removed from the container retained more than 50% of the water after 28 days. The pore size distribution of the samples that were post‐cured at different temperatures up to 28 days did not vary greatly with respect to the average pore size. We can infer that structurally stable pores were formed in the first 4 days and were not affected by the post‐curing rate, which may be related to rheological properties and the drainage path of water or hydrogen gas during post‐curing. [ABSTRACT FROM AUTHOR]

Current fission-based methods of 99Mo production require single use uranium targets which leads to spent uranium waste. This waste could be reduced if a target is developed that does not require dissolution so that it can be reused for multiple production runs. MCNP6.2 was used to model reusable targets of 20% and 1% enrichment for activity produced, target efficiency and burnup. The 1% enriched target was found to be much more efficient but had a lower activity produced compared to the 20% enriched target. The ideal target design for 99Mo production that optimises efficiency and reusability and reduces the self-shielding effect of UO 2 was found to be a target that is made from 1% enriched UO 2 with density as high as allowable for sufficient yields, efficient 99Mo extraction and having an irradiation time of 5 days, with the target able to be re-irradiated and re-processed 2–4 times. • Current fission based manufacturing of 99Mo using uranium targets is based on target destruction. • Target destruction leads to increased radioactive waste volumes. • MCNP6 modelling of uranium targets show that higher density targets have more self-shielding effects and are less efficient. • Low density uranium targets with 5 days irradiation maximise 99Mo output and minimising radioactive waste. [ABSTRACT FROM AUTHOR]

We have examined the irradiation response of a titanate and zirconate pyrochlore-both of which are well studied in the literature individually-in an attempt to define the appearance of defect fluorite in zirconate pyrochlores. To our knowledge this study is unique in that it attempts to discover the mechanism of formation by a comparison of the different systems exposed to the same conditions and then examined via a range of techniques that cover a wide length scale. The conditions of approximately 1 displacement per atom via He 2+ ions were used to simulate long term waste storage conditions as outlined by previous results from Ewing in a large enough sample volume to allow for neutron diffraction, as not attempted previously. The titanate sample, used as a baseline comparison since it readily becomes amorphous under these conditions behaved as expected. In contrast, the zirconate sample accumulates tensile stress in the absence of detectable strain. We propose this is analogous to the lanthanide zirconate pyrochlores examined by Simeone et al. where they reported the appearance of defect fluorite diffraction patterns due to a reduction in grain size. Radiation damage and stress results in the grains breaking into even smaller crystallites, thus creating even smaller coherent diffraction domains. An (ErNd) 2 (ZrTi) 2 O 7 pyrochlore was synthesized to examine which mechanism might dominate, amorphization or stress/strain build up. Although strain was detected in the pristine sample via Synchrotron X-ray diffraction it was not of sufficient quality to perform a full analysis on., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2021 Finkeldei, Chang, Ionescu, Oldfield, Davis, Lumpkin, Simeone, Avdeev, Brandt, Bosbach, Klinkenberg and Thorogood.)

The structure of lead-technetium pyrochlore has been refined in space group F d 3 ¯ m with a = 10.36584(2) Å using a combination of synchrotron X-ray and neutron powder diffraction data and confirmed via Electron Diffraction. The oxide is found to be oxygen deficient with a stoichiometry of Pb 2 Tc 2 O 7-d . Displacive disorder of the Pb cations is evident from the refinements, as has been observed in Bi 2 Tc 2 O 7-d . X-ray absorption spectroscopic measurements at the Tc K-edge demonstrate the valence of the Tc is greater than 4.0 as anticipated from the refined oxygen stoichiometry. Raman spectroscopy confirms the presence of disorder leading us to conclude that this pyrochlore is the first example of a valence V technetium oxide., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2021 Kennedy, Ablott, Avdeev, Carter, Losurdo, Saura-Muzquiz, Thorogood, Ting, Wallwork, Zhang, Zhu and Thorogood.)