Search

The emergence of lithium-ion solid electrolytes greatly increases the safety risk of liquid electrolytes. Among the many solid electrolytes, aluminum-doped Li 1.3 Al 0.3 Ti 1.7 (PO 4) 3 (LATP) has become a research hotspot due to its high ionic conductivity and good air stability. However, the traditional high-temperature sintering process has the problems of lithium volatilization and secondary phase formation. Therefore, it is very difficult to prepare high-quality LATP solid electrolytes. The X-ray diffraction pattern and analysis showed that the LATP samples prepared in this paper showed rhombohedral structure and could be indexed by the R 3 c space group, and a new method of excess lithium compensation sintering was proposed, in which lithium compensation (LiNO 3) could well reduce the impact of lithium volatilization. It can be used as a sintering additive to promote the sintering densification of LATP. In this paper, the optimal sample for sintering at 900°C was determined by measuring the microstructure and electrochemical properties of the electrolyte, and lithium doping was studied. The LATP solid electrolyte with 10 wt% lithium doped has a conductivity of 7.2× 10−4 S/cm and a low activation energy (0.278 eV). Its mechanical properties (elastic modulus and hardness) are the best, which are 103.024 GPa and 8.053 GPa, respectively, and the value of its elastic modulus is much greater than that of lithium metal shear modulus of 4.25 GPa, which can effectively inhibit the growth of lithium dendrites. And the magnitude of the grain boundary conductivity and particle size of the lithium-doped sample correspond to the dielectric constant results. • The appropriate sintering temperature is a key factor in obtaining high-performance LATP solid electrolytes. • The ionic conductivity of the prepared LATP solid electrolyte is as high as 7.2×10−4S/cm. • The elastic modulus and hardness of LATP reach the maximum of 103.024 GPa and 8.053Gpa. [ABSTRACT FROM AUTHOR]

Greenhouse gases such as CH4 generated by forest fires have a significant impact on atmospheric methane concentrations and terrestrial vegetation methane budgets. Verification in conjunction with "top-down" satellite remote sensing observation has become a vital way to verify biomass-burning emission inventories and accurately assess greenhouse gases while looking into the limitations in reliability and quantification of existing "bottom-up" biomass-burning emission inventories. Therefore, we considered boreal forest fire regions as an example while combining five biomass-burning emission inventories and CH4 indicators of atmospheric concentration satellite observation data. By introducing numerical comparison, correlation analysis and trend consistency analysis methods, we explained the lag effect between emissions and atmospheric concentration changes and evaluated a more reliable emission inventory using time series similarity measurement methods. The results indicated that total methane emissions from five biomass-burning emission inventories differed by a factor of 2.9 in our study area, ranging from 2.02 to 5.84 Tg for methane. The time trends of the five inventories showed good consistency, with the Quick Fire Emissions Dataset version 2.5 (QFED2.5) having a higher correlation coefficient (above 0.8) with the other four datasets. By comparing the consistency between the inventories and satellite data, a lagging effect was found to be present between the changes in atmospheric concentration and gas emissions caused by forest fires on a seasonal scale. After eliminating lagging effects and combining time series similarity measures, the QFED2.5 (Euclidean distance = 0.14) was found to have the highest similarity to satellite data. In contrast, Global Fire Emissions Database version 4.1 with small fires (GFED4.1s) and Global Fire Assimilation System version 1.2 (GFAS1.2) had larger Euclidean distances of 0.52 and 0.4, respectively, which meant that they had lower similarity to satellite data. Therefore, QFED2.5 was found to be more reliable while having higher application accuracy compared to the other four datasets in our study area. This study further provided a better understanding of the key role of forest fire emissions in atmospheric CH4 concentrations and offered reference for selecting appropriate biomass burning emission inventory datasets for bottom-up inventory estimation studies. [ABSTRACT FROM AUTHOR]

Anthropogenic carbon dioxide (CO2) emissions from bottom-up inventories have high uncertainties due to the usage of proxy data in creating these inventories. To evaluate bottom-up inventories, satellite observations of atmospheric CO2 with continuously improved accuracies have shown great potential. In this study, we evaluate the consistency and uncertainty of four gridded CO2 emission inventories, including CHRED, PKU, ODIAC, and EDGAR that have been commonly used to study emissions in China, using GOSAT and OCO-2 satellite observations of atmospheric column-averaged dry-air mole fraction of CO2 (XCO2). The evaluation is carried out using two data-driven approaches: (1) quantifying the correlations of the four inventories with XCO2 anomalies derived from the satellite observations; (2) comparing emission inventories with emissions predicted by a machine learning-based model that considers the nonlinearity between emissions and XCO2. The model is trained using long-term datasets of XCO2 and emission inventories from 2010 to 2019. The result shows that the inconsistencies among these four emission inventories are significant, especially in areas of high emissions associated with large XCO2 values. In particular, EDGAR shows a larger difference to CHRED over super-emitting sources in China. The differences for ODIAC and EDGAR, when compared with the machine learning-based model, are higher in Asia than those in the USA and Europe. The predicted emissions in China are generally lower than the inventories, especially in megacities. The biases depend on the magnitude of inventory emissions with strong positive correlations with emissions (R2 is larger than 0.8). On the contrary, the predicted emissions in the USA are slightly higher than the inventories and the biases tend to be random (R2 is from 0.01 to 0.5). These results indicate that the uncertainties of gridded emission inventories of ODIAC and EDGAR are higher in Asian countries than those in European and the USA. This study demonstrates that the top-down approach using satellite observations could be applied to quantify the uncertainty of emission inventories and therefore improve the accuracy in spatially and temporally attributing national/regional totals inventories. [ABSTRACT FROM AUTHOR]

Methane (CH4) is one of the most important greenhouse gases causing the global warming effect. The mapping data of atmospheric CH4 concentrations in space and time can help us better to understand the characteristics and driving factors of CH4 variation as to support the actions of CH4 emission reduction for preventing the continuous increase of atmospheric CH4 concentrations. In this study, we applied a spatiotemporal geostatistical analysis and prediction to develop an approach to generate the mapping CH4 dataset (Mapping-XCH4) in 1° grid and three days globally using column averaged dry air mole fraction of CH4 (XCH4) data derived from observations of the Greenhouse Gases Observing Satellite (GOSAT) from April 2009 to April 2020. Cross-validation for the spatiotemporal geostatistical predictions showed better correlation coefficient of 0.97 and a mean absolute prediction error of 7.66 ppb. The standard deviation is 11.42 ppb when comparing the Mapping-XCH4 data with the ground measurements from the total carbon column observing network (TCCON). Moreover, we assessed the performance of this Mapping-XCH4 dataset by comparing with the XCH4 simulations from the CarbonTracker model and primarily investigating the variations of XCH4 from April 2009 to April 2020. The results showed that the mean annual increase in XCH4 was 7.5 ppb/yr derived from Mapping-XCH4, which was slightly greater than 7.3 ppb/yr from the ground observational network during the past 10 years from 2010. XCH4 is larger in South Asia and eastern China than in the other regions, which agrees with the XCH4 simulations. The Mapping-XCH4 shows a significant linear relationship and a correlation coefficient of determination (R2) of 0.66, with EDGAR emission inventories over Monsoon Asia. Moreover, we found that Mapping-XCH4 could detect the reduction of XCH4 in the period of lockdown from January to April 2020 in China, likely due to the COVID-19 pandemic. In conclusion, we can apply GOSAT observations over a long period from 2009 to 2020 to generate a spatiotemporally continuous dataset globally using geostatistical analysis. This long-term Mpping-XCH4 dataset has great potential for understanding the spatiotemporal variations of CH4 concentrations induced by natural processes and anthropogenic emissions at a global and regional scale. [ABSTRACT FROM AUTHOR]