Search

Mine fires are becoming a serious issue as the intensity of mining increases, especially in deep mines. Loose coal gob has a hidden ignition location and a high possibility of spontaneous combustion, which makes fire prevention difficult. Therefore, based on the theory of gas seepage and the characteristics of loose coal, a model of air leakage and spontaneous combustion in gob is established in this paper. Using working face #10414 in the Yangliu coal mine as an example, the relationship between the three spontaneous coal combustion (CSC) zones and the three stress zones is analyzed and verified by combining a FLAC3D simulation with field monitoring. In addition, the influence of advancing speed on the CSC is discussed, and suggestions for fire prevention are presented. The results show that the variation in the calorific value of the CSC with increasing degree of looseness of the residual coal in the gob forms an arch‐shape. There is a one‐to‐one relationship between the distribution of the three stress zones and the three CSC zones. In addition, as the advancing speed increases, the contact time between the loose coal body and the air decreases and the possibility of CSC decreases. This study provides a scientific basis for fire prevention and control in mines. [ABSTRACT FROM AUTHOR]

Gas disasters are a major factor influencing safe production in mines: Gas extraction can reduce the gas content in coal seams, providing a guarantee of safer production. The parameters for gas extraction are the primary factors influencing the effectiveness thereof. Aiming at the creep properties of soft coal, a fluid‐solid coupling mathematical model considering creep properties of coal was established based on dynamic evolution equation for permeability considering the effects of matrix shrinkage and effective stress. Additionally, by utilizing COMSOL Multiphysics software, the gas extractions from a single borehole and multiple boreholes were calculated. Moreover, the parameters for gas extraction were optimized and applied and tested in field conditions. The result showed the reduction in gas pressure around the boreholes was larger than that from a single borehole when conducting gas extraction from multiple boreholes. The borehole spacing when extracting gas in coal seams by drilling multiple boreholes should be more than twice that of the effective drainage radius. The optimal borehole spacing ranged from 3.2 to 4.2 m for gas extraction lasting 180 d. Numerical simulation was carried out to ascertain the distribution of stress on coal around a roadway. The result revealed that the damage radius of the roadway was 11.8 m, and a reasonable hole‐sealing depth was 12 m. On condition that the borehole spacing during gas extraction from multiple boreholes was 4 m, the reasonable pre‐extraction time was 180 days taking the gas pressure being reduced to <0.74 MPa as a critical point. Furthermore, the gas content, the amount of extracted gas, etc, in a working face after the parameters for gas extraction were optimized were measured. The result suggested that the effect of gas extraction after optimizing parameters conformed to industry standards. [ABSTRACT FROM AUTHOR]