Search

The converter transformer epoxy impregnated paper bushing is a multi-media electrical equipment, and the main materials include the internal conductor, the external conductor, transformer oil, SF6 gas, the air inside internal conductor, the main insulation material epoxy impregnated paper, sheath, and fittings. In actual operating, the converter transformer bushing is undertaken by the harmonic current with large number of high harmonics and the temperature distribution of the epoxy impregnated paper converter transformer bushings under actual current waveform needs to be researched. What's more, the temperature distribution of the epoxy impregnated paper converter transformer bushings is affected by several factors and to provide basis for the optimization of bushings it's necessary to research about the impact of these factors on the temperature distribution of the epoxy impregnated paper converter transformer bushings. In this paper, on the basis of our previous paper [8], the 3-D temperature distribution of the 400 kV epoxy impregnated paper converter transformer bushing under actual current waveform with large number of harmonics has been simulated by using the computational fluid dynamics (CFD) and finite element method (FEM) analysis. The temperature distribution regularity of the 400 kV converter transformer bushing under different influencing factors has been computed and analyzed. The dissipation structure of the bushing has been optimized and the DC steady-state electric field distribution of the 400 kV converter transformer bushing has been obtained considering the temperature gradient in epoxy impregnated paper. [ABSTRACT FROM PUBLISHER]

The present work describes an experimental investigation dealing with the harmonic distortion of the voltage applied to samples of pressboard paper. The investigation especially concerns the study of dielectric losses in order to determine the contribution of each component in these losses. The influence of the moisture level of the samples is also discussed with respect to the influence of the humidity on the insulating system. A new method of determining the losses is proposed; it permits the weighing of the contribution of each harmonic. Three different power supplies with different distortion rates were used in this work. For each experiment, the form and the RMS value of the current and the voltage are reported. The harmonic analysis was carried out, and the results show an important effect of the distortion rate on the voltage and the moisture level on the dielectric losses. [ABSTRACT FROM AUTHOR]

Frequency Domain Spectroscopy is a popular non-invasive method that is widely used for condition assessment of oil-paper insulation in real-life power transformers. Conventional Frequency Domain Spectroscopy is done using sinusoidal excitation over a wide frequency range. In this work, a different approach has been taken to investigate some more possibilities of Frequency Domain Spectroscopy using non-sinusoidal excitation for a better condition assessment of oil-paper insulation. For that, triangular waveshape was chosen as non-sinusoidal excitations whose slope can be changed to vary the harmonic content and amplitudes of constituent components. Samples with preset moisture contents that emulate the oil-paper insulation of real-life transformer have been prepared in the laboratory for the assessment of insulation condition. For a comparative study, both sinusoidal and triangular excitations having same peak as well as time period are applied to the prepared samples under controlled environmental condition and corresponding dielectric response currents are measured. From the applied voltages and corresponding dielectric response currents, dielectric dissipation factors are calculated and compared. It has been observed that use of nonsinusoidal excitation provides better results than sinusoidal excitation in the estimation of paper moisture content. It has also been observed that among the applied non-sinusoidal excitations, a particular waveform provides more accurate information about the paper moisture content. [ABSTRACT FROM AUTHOR]

This paper presents a novel technique to determine the optimized slope of triangular excitation in frequency domain spectroscopy that can provide better information about condition of oil-paper insulation. In conventional frequency domain spectroscopy, estimation of frictional losses due to the interactions of oscillating dipoles helps in investigating insulation condition. But, different types of dipoles in insulation cannot have similar dielectric relaxation times. Therefore, excitation having multiple frequencies is necessary for the dipoles to undergo more synchronized oscillations. This synchronized oscillation of dipoles reduces the inter-dipolar interactions and provides better information regarding insulation condition. Hence, in this work, triangular excitation is used for frequency domain spectroscopy since its harmonic contents can be varied by changing the slope. The slope of the triangular excitation is optimized to obtain more accurate information about the insulation condition. The optimized triangular excitation for insulation is determined using the proposed equivalent circuit model. To experimentally determine the effectiveness of the model, three test samples having preset moisture content in paper have been prepared in the laboratory. The optimized triangular excitations are then applied to the test samples to estimate their insulation condition. Experimental results show that the use of optimized triangular excitation provides information regarding the condition of oil-paper insulation with greater accuracy. In order to investigate the applicability of the proposed equivalent circuit model, the experiment has also been performed on real-life transformers. [ABSTRACT FROM PUBLISHER]

Frequency domain spectroscopy is a potential tool for non-invasive condition assessment of oil-paper insulation in power equipment. On the other hand, it is well known that the results of frequency domain spectroscopy are affected predominantly by temperature. Moreover, the voltage used for frequency domain spectroscopy is sinusoidal is nature. But the actual insulation system at site is stressed by voltage that may deviate significantly from sinusoid during operation. Considering these two aforesaid facts, in this paper, the response of oil-paper insulation has been studied at different temperatures using both sinusoidal as well as non-sinusoidal excitation. An experimental sample has been prepared in the laboratory that emulates the composite insulation of oil immersed type power transformer at site. The results of frequency response using sinusoidal voltage waveform at different temperature show good agreement with the conventional results that validates the scheme of the experimental setup. Some more information is obtained from the response of non-sinusoidal excitation that could help to get a better interpretation of the actual physical condition of oil-paper composite insulation. [ABSTRACT FROM AUTHOR]

In recent years, there is an increased use of passive filters in both transmission and distribution systems due to the proliferation of power electronic devices. However, the problem of filter design has not been well addressed in the past and one example is the application of high-pass filters in a filter package. Three types of HP filters are widely used to mitigate multiple harmonics, i.e., 2nd HP filter, 3rd HP filter and C-type filter. There is still a lack of research to clearly reveal the characteristics of each filter, which makes it difficult for the designer to select the optimal filter topology under different circumstances. The main goal of this paper is to solve the problem of how to select a proper configuration among three HP filter candidates for a given harmonic problem. Unlike the conventional optimization-based filter studies, this paper investigates three HP filters in an analytical way. As a result, the paper provides a deep insight into the inherent characteristics of the filter and the conclusions drawn in the paper are universal; thus can be used in different applications, ranging from low voltage levels to high voltage levels. The research results lead to a recommended application scope of each HP filter, which is very useful to guide the design of filter packages and help designers to evaluate the design results. [ABSTRACT FROM AUTHOR]

This paper proposes an optimization approach for allocating power quality monitors (PQMs) aiming to monitor all harmonic resonance conditions while taking power system uncertainties into account. The placement approach utilizes the frequency scan response for calculating impedances over a range of frequencies and consequently determining harmonic resonance conditions. Thereby, it is capable of building binary matrices, which include harmonic resonance conditions. Also, by utilizing the union operator at binary matrices, power system uncertainties such as photovoltaic generation and load level can be considered in the allocation method. The placement approach is expressed as a linear problem that determines the best locations of PQMs and their optimal number so that they monitor all harmonic resonance conditions. Besides, by considering the area of harmonic pollution of non‐linear loads in the proposed method, owners of electrical networks can find a solution with fewer PQMs to monitor harmonic resonance orders inside a particular area of the network. The performance of the presented approach is demonstrated using the 15‐node distribution network and a real electrical network, as well as a real large electrical network in Iran. Results show that the proposed method suggests fewer PQMs to monitor harmonic resonance conditions compared to previous methods. [ABSTRACT FROM AUTHOR]

Carrier phase‐shifted sine pulse width modulation is a common modulation strategy for medium‐ and low‐voltage cascaded H‐bridges (CHB). This paper proposes a novel jittered‐carrier phase‐shifted sine pulse width modulation (JCPS‐SPWM) to reduce the total harmonic distortion (THD) of the converter. It makes the carrier jitter regularly while the total switching times remain unchanged, which reduces the THD of the bridge arm voltage and current by moving the low‐order output harmonics of the bridge arm voltage and current to filterable high‐order harmonics. Since the total number of switching times remains unchanged, this modulation strategy will not cause any increase in switching loss. A seven‐level CHB simulation model and an experimental prototype are built to verify the effectiveness of the approach. The results show that harmonic content can be reduced by 47.5% compared with the traditional method, thus verifying the effectiveness of the JCPS‐SPWM. [ABSTRACT FROM AUTHOR]

DC–DC buck converters have become prominent components for energy optimization in power systems, and how to improve control performances is a challenging issue to be addressed. In this paper, we aim to investigate the harmonic problem of sliding mode (SM) controlled buck converters imposed by the often-ignored unmodeled dynamics of the Hall sensor. The unified mathematical model of the whole system is established by combining the SM controller, the buck converter, and the Hall sensor, where the signal loss in the transmission process of the whole closed-loop control system is considered. Based on the Lyapunov stability theorem, the SM controller is designed to guarantee system stability, as well as to deduce the stable working areas and the tuned controller parameters. Furthermore, we introduce the descriptive function (DF) approach to investigate the influence of the unmodeled dynamics of the Hall sensor on the system harmonics in the frequency domain, which can deduce the relationship between the amplitude-frequency characteristics of the output signal and the Hall sensor. Simulations and experiments validate this paper. [ABSTRACT FROM AUTHOR]

This paper presents a power quality analysis for multiple electric vehicle charging stations of the AC-Level 2 type in a real-life case study. The data was collected with a power quality analyzer that measured the main distribution system feeding nine 7 kW charging stations in a commercial site with light-duty vehicles in Malta, Europe. The relevance of this study to the specific case of Malta is accentuated by the topological challenges of the country; high density of road vehicles, with 18,000 vehicles for each square kilometer; and ambitious targets of reaching carbon neutrality by 2050. Data were collected over six days on an actual charging system with real-life charging patterns. Various results are presented in this paper, including three-phase system voltages and currents, individual harmonic voltage and current components, total harmonic distortion and total current demand distortion. These measurements were compared with standardized thresholds for low-voltage equipment used in public spaces, mainly as stated in IEEE 519-2014. [ABSTRACT FROM AUTHOR]

The phase‐locked loop (PLL) is a critical control module applied in the control system of renewable energy sources (RESs) to synchronize with the grid voltage. When a fault occurs, the dynamic response process of the PLL will generate a phase locking error, resulting in a mass of harmonic components in the fault current of the PV inverter, which further poses challenges to transformer differential protection. To address the challenges posed by the phase locking error in practical engineering applications, this paper proposes an improved scheme that uses a digital computer algorithm to record and store the pre‐fault voltage and introduces the limiting coefficient. Firstly, the memory voltage is used to eliminate the phase locking error of the PLL, thereby mitigating harmonic distortion in the fault current of the RESs and ensuring the reliability of the transformer differential protection. In addition, the limiting coefficient is introduced to eliminate the effect of the increased amplitude of the fault current caused by the memory voltage. The voltage reference value of the inverter is multiplied by an appropriate limiting coefficient k and then output to the physical system. Finally, the effectiveness of the proposed scheme is verified by MATLAB/Simulink simulation. [ABSTRACT FROM AUTHOR]

The paper deals with a final experimental validation of three-dimensional Multiconductor Cell Analysis (MCA) developed by the Electric Energy Transmission Laboratory of the University of Padova. This final confirmation comes from the measurement campaign carried out on one of the longest (100 km) HVAC submarine three-core cables: the Sicily-Malta interconnector. The considered frequency measurements range from 0 to 40th harmonic order with both positive and zero sequence supplies. In this overall harmonic interval and with both supplies, the comparison between measurements and MCA results highlights a very good agreement (maximum differences of 10%). These differences are negligible if measurement uncertainties are considered. [ABSTRACT FROM AUTHOR]

Load profile classification is very important in load forecast, planning and management. Although customers are generally grouped by utilities into residential, commercial classes and respective subclasses, there is a lack of systematic framework that can be used to characterize different classes with signatures that are both human-readable and machine-readable. The work presented in this paper attempts to formulate the theoretical framework for customer classification using the annual load profiles. This paper demonstrates how to extract characteristic attributes in frequency domain (CAFD) and use these CAFDs to formulate a hierarchy of load profiles that can be used as the systematic framework for customer load classification. As signatures for customer classes and subclasses, the CAFDs are obtained by using a data mining method called CART (classification and regression tree). The paper presents a load profile classification test to establish the efficacy of the proposed approach which is significant improvement over current practices that provide mostly qualitative labeling. [ABSTRACT FROM AUTHOR]

Most of the existing methods for harmonic analysis are from frequency‐domain perspective. In fact, the essential factor for generating harmonics is non‐linear characteristic or time‐varying property. Therefore, the harmonic generation mechanism and the harmonic source location method are investigated from the time domain perspective in this paper. Firstly, a general model of non‐harmonic sources is established. The non‐harmonic sources will match well with the proposed general model while the harmonic source will not. Then correlation coefficient that reflects compliance degree between each device and the general model is defined for distinguishing harmonic sources from non‐harmonic sources. On this basis, a novel time‐domain harmonic source location method is proposed. Numerous simulations and experiments have demonstrated that the proposed method has good performance under fluctuations, saturations, pre‐distortions, transient process, and resonances. The defined correlation coefficient can reflect non‐linearity/time‐varying degree of the harmonic source, which can be used for evaluating harmonic emission level of each harmonic source. On this basis, a simple harmonic responsibility division method is proposed, which is immune to possible fluctuations, pre‐distortions, saturations, resonances, and impedance variation. [ABSTRACT FROM AUTHOR]

The authors present the multi‐physical field performances comparative research for a 30 kW, 30,000 r/min high‐speed permanent magnet motor (HSPMM) when the motor is powered by the sinusoidal pulse width modulation (SPWM) voltage inverter and sinusoidal voltage source, respectively. Firstly, electromagnetic performances including torque, voltage and current of the HSPMM with different driving methods are compared and analysed by the finite element method (FEM). Considering the effects of high operation frequency, power losses of the HSPMM with different driving methods under full‐load conditions are calculated and compared with the skin effect and the proximity effect considered for HSPMM winding copper loss estimation. Based on the above analysis, a prototype driven by the SPWM voltage inverter is manufactured, with its electromagnetic and thermal performances tested and verified. In addition, several influencing factors of the HSPMM rotor eddy current loss are studied, with their effects on the HSPMM under different driving methods further analysed and compared as well. A novel equivalent power supply method is proposed to effectively save the calculation time with a negligible error. Finally, in order to further improve the heat dissipation capacity of the HSPMM, a novel cooling method is intensively studied with its influencing factors further analysed. The cooling effect of the novel cooling method and the temperature of the motor components are verified and calculated by the computational fluid dynamics (CFD) method. [ABSTRACT FROM AUTHOR]

This paper explores the determination of any load or load combination in a power system at any moment. This process requires measurements at the main electric utility service entry of a house, known as nonintrusive measurement. To accurately identify loads, total harmonic distortion, RMS, third harmonic currents, and power consumption are considered their fingerprints. Based on these fingerprints, an algorithm called the competitive decision process is developed and integrated into an embedded system. This algorithm has a two-level decision mechanism. In the first stage, the winner loads with the highest similarity scores from each feature are determined, and the loads with a similarity score higher than 90 move to the second stage to be evaluated. Loads that do not pass the first stage in all features are not considered for the next one. In the second stage, the scores from each feature of the loads passed to this stage are summed, and the load with the highest score is determined. It is experimentally validated that the method significantly detects correct load or load combinations for six residential appliances. Fifty-six type-tests are performed, and each type-test contains ten measurements. As a result, a total success rate of over 97 percent is obtained in all metrics. [ABSTRACT FROM AUTHOR]

In this paper, we investigate the global well-posedness for the 3D Boussinesq equations. Firstly, we prove the global existence and uniqueness of the solution in critical space for small initial data. Then, aimed at the large initial data giving rise to global solution, we obtain a certain class of large solutions with initial data slowly varying in one direction. The proof relies on the special structure of the equation and some new refined estimates for the velocity and temperature. [ABSTRACT FROM AUTHOR]

In this paper, the vertical vibration behaviour of an experimental scale demonstrator of a railway vehicle carbody fitted with an anti-bending bar system of innovative design is studied to highlight its ability to raise the bending natural frequency of the railway vehicle carbody and to reduce the intensity of the vibration. The anti-bending bar system has been previously proposed by the second author as a new passive method to improve comfort in passenger coaches with long carbodies that have a natural bending frequency located in the range of maximum sensitivity of human beings to vertical vibration. The experimental scale demonstrator consists of an aluminium plate supported on four rubber supports. The aluminium beam reproduces to a scale of 1:10 the length of a passenger coach carbody, and its thickness is set so that the first bending frequency of the plate is close to the usual value of real carbodies. The anti-bending bar system consists of two steel bars arranged longitudinally in the middle of the aluminium plate, near its side edges. Each anti-bending bar is fixed at the ends to the aluminium plate by joints consisting of a clamping arm welded to a fixing flange. The two anti-bending bars oppose the bending movement of the aluminium plate, thus increasing its bending stiffness. This results in increasing the bending natural frequency of the aluminium plate and reduction its vibration. Testing the effectiveness of the anti-bending bar system consists of experimentally determining the frequency response of the aluminium plate acceleration without/with the anti-bending bar system by the impact hammer method. The experimental results show the first bending natural frequency increases from 9.01 Hz to 13.4 Hz and the acceleration amplitude decreases by more than 50% when the anti-bending bar system is used. To confirm these results, a theoretical model of the experimental scale demonstrator based on the finite element method was developed. The results obtained with this model are in line with those obtained experimentally. [ABSTRACT FROM AUTHOR]

A high-harmonic traveling-wave tube (HHTWT) is designed, developed, and tested in this paper. This device is configured as a multiplier–amplifier with Q-band input signals and its third harmonic, i.e., D-band output power. The tested result demonstrates that 280 mW at 133.5 GHz is obtained as a result of 200 mW at 44.5-GHz input signal. The simulation and experiment validate that the high-harmonic radiation can be generated and amplified in the HHTWT. The approach described in this paper could find application in exploring high power, wideband tunable terahertz source. This paper is expanded from a conference paper on IVEC 2017. The detail design produce and tested result are added in this paper. The explanation of the simulation and tested results is also presented. [ABSTRACT FROM AUTHOR]

The rising cost of production testing for a system-on-a-chip (SoC) is one of the crucial matters to chip makers, due to long test time and costly automated-test-equipment. This paper proposes a spectral leakage-driven built-in self-test (BIST) scheme to precisely predict the nonlinearity of mixed-signal circuits in the loopback mode, thereby accomplishing cost-effectiveness (compared to previous BIST-based works). A digitally synthesized single-tone sinusoidal stimulus used for conventional harmonic testing is incoherently sampled by a device under test (DUT). The DUT output signal exhibits the correlation between the DUT harmonics and the spectral leakage introduced by the incoherent sampling. The DUT output signal is then fed to another DUT through a loopback path, so that the harmonics of a pair of DUTs are correlated with the spectral leakage on the loopback response; the magnitude of the spectral leakage is considered as a weighting factor on the harmonic magnitude of those DUTs. The correlation is quantitatively modeled as characteristic equations in , and postprocessing predicts the harmonics of the two individual DUTs, by simultaneously solving the characteristic equations using on-chip DSP core available in an SoC. Simulation and hardware measurements validated that this paper can be practically used for production testing by showing less than 0.3 and 0.6 dB of the prediction errors, respectively. [ABSTRACT FROM AUTHOR]

An increasing need for fast and reliable models has led to a continuous development of Fourier-based (FB) analytical modeling. This paper presents an overview of the techniques that are currently available in FB modeling for electric machines. By coupling that overview to the most relevant literature related to the subject, an interesting starting point is provided for anyone who wants to use or improve FB models. The following seven aspects of FB models are discussed in detail: 1) the magnetic potential (scalar or vector potential); 2) the coordinate system and the solution of the partial-differential equations for each magnetic potential and for each coordinate system; 3) the way in which time dependence is accounted for; 4) the implementation of the source terms; 5) the possibilities to account for slotted structures; 6) the modeling of eccentricity; and 7) the post-processing computation of physical quantities, such as flux density, electromotive force, torque, losses, and eddy currents in conductive objects. Furthermore, this paper gives the closed form solution of the Laplace, Poisson, and Helmholtz equations in each coordinate system. In addition, this paper tackles other important features of FB models such as computational time reduction and coupling the machine model to an electric circuit. [ABSTRACT FROM AUTHOR]

Controllability of linear continuous-time periodic systems is dealt with via a harmonic analysis approach for the first time in this paper. This approach reveals that controllability of continuous-time periodic systems can be connected to necessary and sufficient conditions expressed explicitly with Fourier coefficients of the system matrices, which can be interpreted in a way similar to what we have seen in linear time-invariant cases. These controllability conditions shed new light upon structural characteristics of continuous-time periodic systems that are hard to know by means of existing time-domain controllability criteria in the literature. Controllability canonical decomposition of linear continuous-time periodic systems is revisited through state coordinate transforms of strong analytic features. The results are heuristic and significant for examining structural characteristics of continuous-time periodic systems and extending controllability-related techniques that are widely employed in linear time-invariant systems to linear continuous-time periodic systems. [ABSTRACT FROM AUTHOR]

Over the past few decades, there have been rapid advances in solid-state technology as well as a reduction in cost. This, coupled with the functionality and efficiency improvements they afford, has resulted in a massive increase in the use of electronic devices. Where traditionally, there were a few well-known nonlinear loads that needed to be considered, now there are numerous low-power devices. Although individually insignificant, collectively, they are very significant. This paper presents a tensor-based harmonic analysis approach that is capable of capturing important interactions while being computationally efficient enough to model a large distribution system. Numerical experiments are used to highlight the advantages of the tensor framework. Numerous papers have investigated the tensor parametrisation or its mathematical equivalent—harmonically coupled admittance matrices (also known as frequency coupling matrices). However, this paper, for the first time, demonstrates how these models can be applied to perform harmonic modelling of a complete low voltage (LV) distribution system. [ABSTRACT FROM AUTHOR]

Existing non-intrusive load identification methods face with the difficulty of being applied to industrial users whose operation and ON/OFF status are hard to be acquired. Focusing on the above challenge, this paper proposes a non-intrusive identification method of harmonic source loads for industrial users. Utilizing Clarke transform, an equation with respect to voltage and current is formulated to calculate the integrated equivalent impedance, which is then decomposed with the improved complex local mean decomposition (CLMD) and complex fast independent component analysis (C-FastICA) achieving non-intrusive separation of the equivalent impedance signals of individual branches. The separated impedance signals will be used as the basis for load type identification. The proposed method is validated by numerical simulations as well as actual three-phase voltage and current monitoring data. The case study shows that it can effectively identify the types of harmonic source loads while being resistant to noise and impacts of sampling accuracy and diverse load capacities, which obviously demonstrates its practical applicability. [ABSTRACT FROM AUTHOR]

In the representation theory of real reductive Lie groups, many objects have finiteness properties. For example, the lengths of Verma modules and principal series representations are finite, and more precisely, they are bounded. In this paper, we introduce a notion of uniformly bounded families of holonomic {\mathscr {D}}-modules to explain and find such boundedness properties. A uniform bounded family has good properties. For instance, the lengths of modules in the family are bounded and the uniform boundedness is preserved by direct images and inverse images. By the Beilinson–Bernstein correspondence, we deduce several boundedness results about the representation theory of complex reductive Lie algebras from corresponding results of uniformly bounded families of {\mathscr {D}}-modules. In this paper, we concentrate on proving fundamental properties of uniformly bounded families, and preparing abstract results for applications to the branching problem and harmonic analysis. [ABSTRACT FROM AUTHOR]

Few of the challenges with development of a single on–board motor for direct–drive electric vehicles include high torque density and low torque ripple. Therefore, in this paper, a 36–slot, 34–pole consequent pole six–phase permanent magnet synchronous machine (PMSM) has been optimized to address the aforementioned challenges for direct–drive application. Existing literature on optimization processes that rely solely on finite element models are restricted to three–phase machines only and also take longer computation time. Therefore, this paper proposes a novel optimization approach based on supervised machine learning for six–phase PMSM. In this approach, a non–conventional extended dual dq–frame model that accounts for higher order space harmonics in inductances and flux linkages has been developed and used for accurate computation of average torque and torque ripple of six–phase PMSM. Using the performance characteristics obtained from the extended dual dq–frame model for a set of initial design candidates, support vector regression algorithm is employed for supervised machine learning and increasing solutions in the design space. Furthermore, pareto front is used for selecting optimal machine models with maximum torque density and reduced torque ripple. Multi–objective trade–offs and comparison of initial and optimized designs based on average torque, torque ripple, efficiency and cost are performed. [ABSTRACT FROM AUTHOR]

The variety of arc fault induced by different load types makes residential series arc fault detection complicated and challengeable. This paper proposes a hybrid time and frequency analysis and fully connected neural network (HTFNN) based method to identify series ac arc fault. The HTFNN method recognizes samples state by broadly classifying them into resistive (Re) category, capacitive–inductive (CI) category, and switching (Sw) category according to the fundamental frequency components of series current. In each category, separate fully connected neural network (NN) with customized time and frequency indicators being the input is employed for fine class recognition and state identification. This method construction addresses the feature overlap among various cases by separate categories and enables suitable indicator selection within each category. Since the identification complexity in each category is cheaper than identifying all cases together, concise NNs are applied in this paper to reduce computing cost. The general accuracies of normal and arcing state identification in Re, CI, and Sw category are 99.64%, 100%, and 98.45%, respectively, based on 3950 test samples. Method comparison shows that HTFNN achieves higher detection precision at lower computational complexity for generalized load types. This paper also evaluates the feasibility of implementing the method in hardware for arc fault detection device application. [ABSTRACT FROM AUTHOR]

The increasing use of induction motors (IMs) with variable frequency drives for industrial process control and automation has necessitated the need to evaluate their energy efficiency in the presence of voltage and current harmonics. As the determination of IM efficiency is becoming mandatory in many countries, there is a need to develop a testing approach that eliminates inaccuracies due to the operator. This paper presents an automated efficiency testing procedure developed to mitigate the adverse effect of varying technical skill and competence levels of testing personnel on efficiency test results. This is a particularly useful development considering the recently proposed IEC/TS 60034-2-3 methodology which specifies identical tests between sinusoidal supply and converter operation. A comparison of several manual and automated efficiency tests on a 55-kW IM highlighted improvements in repeatability, correlation, and temperature variation due to the latter. In addition, the advanced data acquisition and computation capability of the measurement device used in the developed test rig provides an excellent platform to investigate the dynamic operation of IM drives. [ABSTRACT FROM AUTHOR]

In a common dc-link dual-fed open-end winding permanent magnet synchronous motor (OEW-PMSM) topology, it is well known how the additional flow of a zero-sequence current (ZSC) is permitted. The low zero-sequence impedance characteristic of high-speed machines leads to high-intensity and high-frequency ripple of the ZSC. Therefore, there is a necessity to eliminate the zero-sequence-voltage (ZSV) produced by the two voltage source converters that feed the machine. Furthermore, the non-sinusoidal back electromagnetic force (back EMF) causes the circulation of a third harmonic ZSC. An OEW-PMSM high-speed starter-generator fed by a dual-inverter with a single dc-link is considered. Part I of this paper proposes a modulation for the considered topology able to eliminate instantaneously the ZSV produced. In this paper, a detailed analysis of the deadtime (DT) effect on the ZSV has been carried out and a novel hysteresis control for the ZSC using the DT as a control action is presented. The DT produces a ZSV distortion on the zero-axis that can be used to control the third harmonic ZSC flowing due to the non-sinusoidal machine back EMF. [ABSTRACT FROM AUTHOR]

Electronic power interfaces are commonly used in microgrids for renewable energy integration and a control method based on a virtual synchronous machine (VSM) represents an attractive alternative to conventional approaches. This control method has several advantages, however, a number of issues still need to be properly addressed, including those of power quality and harmonic current sharing. In this paper, a finite-gain repetitive controller (FGRC) is proposed to improve the current harmonic distribution in microgrids based on VSMs. Stability, transient performance, and performance under frequency variations are studied analytically. When compared to other control options, the method proposed here is capable of dealing with all harmonics simultaneously. A comparative analysis is provided to emphasize the contributions of this paper. The control system improvements were tested on a prototype microgrid consisting of two 15 kVA VSMs, distribution line impedances, and a non-linear load. [ABSTRACT FROM AUTHOR]

A motion effect, the vestibular stimulus generated by a moving chair, is crucial in improving user experiences in many virtual reality (VR) and entertainment applications. However, the perceptual characteristics of motion effects remain unexplored to a great extent. This paper constructs a perceptual space that accounts for many motion effects based on their perceptual distances and then demonstrates smooth–rough and irregular–regular as its two primary perceptual dimensions. An authoring space is constructed with these two pairs as the axes. We also present methods for synthesizing new motion effects with a specific property in the authoring space. The contributions of this work are with new insights into the perceptual characteristics of motion effects and the first design methods of motion effects achieving desired perceptual properties. [ABSTRACT FROM AUTHOR]

Unavoidably, the controlsystem of any permanent magnet synchronous motor (PMSM) is subjected to perturbations, e.g., motor nonidealities and inverter nonlinearities. To reject these perturbations, a new super-twisting (ST) control variant, called speed adaptive super-twisting (S-AST) control, is proposed in this paper. In the S-AST control, a proportional-integral (PI) and a ST controllers are merged using an adaptive law that is based on the motor speed measurement. This is done to reduce the chattering problems that the standard ST control presents. In addition, a mathematical design for the S-AST control is proposed, where the relationship between the chattering amplitude, the switching frequency and the system perturbations is shown. The main contribution in this paper is the application of the S-AST controller to reduce the total harmonic distortion (THDi) of the PMSM currents. By comparing the S-AST control against PI control, the THDi is reduced from 9.9% to 1.27%, in simulation, and the THDi is reduced from 22.79% to 1.56%, experimentally. These results demonstrate how the S-AST control is an excellent alternative to improve the waveform of the PMSM currents. [ABSTRACT FROM AUTHOR]

A three-section coupled-cavity traveling-wave tube (CC-TWT) has been developed for avionic applications. The design parameters for a TWT operating in ${X}$ -band with a high average power, high power, high efficiency, high duty, wideband, low weight, and rugged structure have been obtained. Data presented show a good agreement between simulation results and prototype test results. The small-signal simulations were done with software developed in house for the evaluation of interaction impedance. The commercial code CST suite was used for the prediction of the dispersion diagram. The large-signal simulations were carried out with the “1-D code, computer program for analysis of CC-TWT,” by Cosmic. This paper explains the theory used for the design and shows the “cold test” and “hot test” results achieved with the prototype. The prototype has been able to deliver more than 1.5-kW average output power in a bandwidth larger than 1 GHz. [ABSTRACT FROM AUTHOR]

This paper presents a research work on the electromagnetic loss modeling and demagnetization analysis for a high-speed permanent magnet machine (HSPMM). The iron loss is estimated by improved modeling considering harmonics and rotational magnetic field effects to achieve high precision; rotor eddy current loss is researched and comprehensively investigated using finite-element method (FEM). The auxiliary slot and PM beveling are also proposed to reduce the rotor eddy current loss for machine at high-speed operation. Temperature-dependent PM demagnetization modeling is utilized in HSPMM FEM analysis to investigate machine performance due to temperature variation, while optimized rotor structures are proposed and comparatively researched by FEM to improve the machine anti-demagnetization capability in harsh conditions. The HSPMM temperature is estimated based on the calculated loss results and machine computational fluid dynamic modeling. Experimental measurements on the prototype machine verify the effectiveness of the machine electromagnetic and thermal modeling in the paper. [ABSTRACT FROM AUTHOR]

This paper presents a broadband poly-harmonic behavioral model for microwave mixers operating in the linear regime. It is extracted from large-signal vector measurements and predicts the response with respect to an arbitrary local oscillator (LO) phase. The model is capable of estimating the performance of the converted signals and the main mixing products for an intermediate frequency that spans within an a priori defined bandwidth. This paper gives a detailed model analytical treatment along with a discussion of its properties and the description of the characterization method. The model validation is achieved by the characterization of a subharmonic mixer implemented in the hybrid technology that operates with a 2.229-GHz LO, an intermediate frequency bandwidth of 732–754 MHz, and a corresponding radio frequency bandwidth of 5.191–5.211 GHz. Independent experimental validation is achieved by an image rejection mixer composed of two nominally identical mixers, individually characterized by the proposed technique. Validation is concluded with experimental data, demonstrating the model’s capability to deal with a phase-modulated LO signal. [ABSTRACT FROM PUBLISHER]

This paper focuses on analyzing asymmetric and open-phase fault modes in symmetrical two-channel six-phase induction machines while considering the spatial harmonics of the electromagnetic field in the air gap. Under sinusoidal power supply, the magnetomotive force exhibits high-order spatial harmonics, which arise due to the winding design. The interaction between these spatial harmonics and the first-time harmonic of the power supply results in the presence of high-order harmonics in the current and electromagnetic torque. The harmonic content of the currents and torque under asymmetric and open-phase operation mode while taking into account spatial harmonics is analyzed. It is shown that in asymmetrical modes, in addition to the 5th, 7th, 11th, and 13th higher harmonics found in symmetrical modes, harmonics in multiples of the 3rd are introduced into the stator winding currents. As for the composition of the electromagnetic torque in asymmetrical modes, all even harmonics are present, in addition to the 6th and 12th harmonics that are characteristic of symmetrical modes. A mathematical model of the six-phase induction machine has been developed using the average voltages within the integration step method. Its adequacy was verified by comparing the simulation results with the experimental results obtained from the developed prototype. [ABSTRACT FROM AUTHOR]

Real‐time estimating harmonic distortion levels near the Point of Interconnections of grid‐connected inverter‐based resources (IBRs) is critical for maintaining the operational reliability and security of the power grid, particularly during transients when IBRs generate excessive harmonics. Traditional methods like Total Harmonic Distortion (THD) are unsuitable for time‐varying waveforms as they suffer from aliasing, spectral leakage, and picket‐fence effects. This paper proposes a novel approach that utilizes convolution‐based measures for estimating harmonic distortion, which offers a more suitable way for ongoing real‐time applications. The first measure uses a 60 Hz sinusoidal function as the convolution kernel, while an enhanced measure employs the Gaussian function as the kernel. Two convolution‐based measures are proposed and compared with THD. The comparison criteria are based on the two significant features describing the variation of harmonics: min/max values and variation curvature of harmonics showing the accurate performance of proposed measures. Moreover, short‐term estimations of harmonic distortion are used to validate the effectiveness of the proposed measures, while long‐term estimations are used to determine the ability of the proposed measures to determine harmonic distortion contributions among power network components. The proposed technique's intrinsic characteristics provide a sampling window with low sensitivity to deviations in the fundamental frequency and signal's stationary condition to prevent aliasing and spectral leakage and rule out the impact of the picket‐fence effect on the harmonic distortion level estimation. [ABSTRACT FROM AUTHOR]

To increase the acceptance of electric vehicles (EVs), inductive charging technology can be an important tool because of the simplified charging process for the user. This paper presents the fundamentals of wireless power transfer (WPT) for EVs, while focusing on electromagnetic compatibility (EMC). This work deals with the investigation of the conducted and field-bound interference emissions using a WPT system with a max. input power of 3.6   k W . During the research, a new frequency-tracking algorithm is developed, to find the optimal operating frequency at any coil misalignment. The impedance behavior as well as the possible interference paths are investigated, showing the great geometric influence of the test bench setup. The conducted interference currents are analyzed and subsequently filtered. The filter shows good performance in attenuating common mode currents. The measured radiated magnetic field is directly rated against the proposed limits of various standards. Finally, the EMC influence of the direct current (DC) power supply line to the inverter is examined, which is not defined precisely in the standard. This underlines the significance of a standardized test setup, since the limit values can be met under different geometric circumstances of the DC cable. [ABSTRACT FROM AUTHOR]

In this paper, we present an analysis of the properties of the prototype three-phase Multichannel Permanent Magnet Synchronous Generator (MCPMSG) prototype designed and constructed by the authors. Each channel of the generator has electrically separated windings, which allows us to create an island system of electricity generation. The analyzed MCPMSG is intended for critical applications, and it is designed for four-channel operation. The purpose of this work is to analyze various configurations of the generator channels to improve the redundancy of the electricity generation system. The MCPMSG operation with one or two independent sources of energy consumption in the case of a dual-channel or double dual-channel operation was investigated. For the analyzed cases, the original mathematical models of the three-phase MCPMSG were developed. On the basis of numerical and laboratory tests, the influence of individual configurations on the MCPMSG output parameters was determined. An original method for diagnosing the operation of the MCPMSG channels was developed. Numerical and laboratory tests of the proposed diagnostic method based on a single voltage signal were carried out. As part of the laboratory tests, selected operating states under conditions of full winding symmetry and internal asymmetry were analyzed. The advantage of the proposed diagnostic method is the control of the operating state of the channels both under load and in the de-energized state. The proposed diagnostic method for control of the individual channel requires measurement of only one voltage signal. [ABSTRACT FROM AUTHOR]

This paper validates the use of a harmonic analysis algorithm on a microcontroller to perform measurements of non-stationary signals in the context of smart grids. The increasing presence of electronic devices such as inverters of distributed generators (DG), power converters of charging stations for electric vehicles, etc. can drain non-stationary currents during their operation. A classical fast Fourier transform (FFT) algorithm may not have sufficient spectral resolution for the evaluation of harmonics and inter-harmonics. Thus, in this paper, the implementation of a chirp-Z transform (CZT) algorithm is suggested, which has a spectral resolution independent from the observation window. The CZT is implemented on a low-cost commercial microcontroller, and the absolute error is evaluated with respect to the same algorithm implemented in the LabVIEW environment. The results of the tests show that the CZT implementation on a low-cost microcontroller allows for accurate measurement results, demonstrating the feasibility of reliable harmonic analysis measurements even in non-stationary conditions on smart grids. [ABSTRACT FROM AUTHOR]

Improvised asymptotic boundary conditions are a sparse but approximate method of solving open boundary problems. Since this method approximates unbounded space as series of isotropic shells, it can be readily implemented in virtually any finite element solver without the need for additional code. A previous paper addressed application of this technique to magnetic problems described with a vector potential formulation. This paper extends the method to electrostatics and related scalar potential formulations. [ABSTRACT FROM AUTHOR]

In a previous paper, we introduced a modified Steinmetz equation to account for dc-bias field effects, which requires only a simple dc permeability measurement to predict total power loss. In this paper, we expanded our investigation to include Finemet nanocrystalline material and found that our modified Steinmetz formalism was effective in predicting dc-bias-related losses for this system as well. In this paper, it was observed that Finemet cores exhibit lower losses than Metglas cores under identical test frequencies and bias fields. In addition, we show that a full characterization of the dc loss component necessitates the consideration of higher order ( $n>1$ ) harmonic components. In order to quantify these higher frequency loss components, a dc–dc converter-based test system was built to intentionally introduce inductor current harmonics by varying the filter capacitance and parasitic inductance of the test system. Both core types were evaluated under fundamental frequencies of 20 to 150 kHz and dc-bias fields of up to 1.3 kA/m, with the inclusion of distorted waveforms obtained by varying filter capacitance. At higher frequencies, the Metglas cores were found to exhibit greater loss fractions associated with the higher order harmonic components. A detailed summary of the measured core loss characteristics for both core types is included and discussed. This paper includes the details of the measurements, the modified Steinmetz relation, and the loss extraction algorithm used for analysis. [ABSTRACT FROM PUBLISHER]

This paper yields a systematic scientific foundation for the evaluation of responsibility of utility and customer to the harmonic distortions at the point of common coupling (PCC). In this regard, this paper proposes a technical process for the evaluation of harmonic distortions. This technical process provides a way to answer some technical questions related to harmonic issues based on the following aim: identifying the dominant side, determining the responsibility of each side to harmonic distortions, determining the influence of the utility on harmonic current distortions at the PCC, and determining the influence of the customer on harmonic voltage distortions at the PCC. This paper deciphers these technical questions in the concrete “relevant factors” for the evaluation of harmonic distortions. These “relevant factors” are systematically classified based on the equivalent circuits of utility and customer side for harmonic studies. In this regard, six well-defined “relevant factors” for the Thevenin equivalent circuit and six analogue “relevant factors” for the Norton equivalent circuit are formulated. Some of these “relevant factors” are proposed, for the first time, in this paper. Furthermore, this paper explains the relations between the “relevant factors” to ascertain their interdependence. In addition, the usefulness of the “relevant factors” to answer the technical questions related to the harmonic issues is illustrated using a calculation example. [ABSTRACT FROM AUTHOR]

The goal of the paper is to develop a hybrid modulation technique to combine space vector modulation (SVM) scheme and synchronous optimal pulsewidth modulation (SOPWM) technique for current source inverter (CSI). SVM provides better dynamic performance, but is unable to produce less total harmonic distortion (THD) on inverter current at low device switching frequency ($< $ 1 kHz). SOPWM provides less THD even at low device switching frequency, however it needs a conversion technique to operate CSI and it needs an additional control technique to improve dynamic performance. Hence to overcome these limitations, this paper develops a single modulation technique called optimal SVM technique that can achieve less THD as well as better dynamic performance. To develop optimal SVM technique, three methods have been proposed in this paper. These three methods do not require an additional conversion technique to operate CSI and they provide less THD even under low device switching frequency of 450 Hz. Experimental results prove that the proposed modulation technique can provide better steady-state performance as well as dynamic performance. [ABSTRACT FROM AUTHOR]

This paper proposes a single-phase ac–dc–ac converter composed of a transformer and two three-leg converters connected in series. The proposed converter allows to supply the load with a voltage with constant amplitude and frequency, and to operate with the grid current with low harmonic distortion and high power factor. In addition, the converter can be used to mitigate fundamental overvoltage and voltage harmonics at the grid. The system model, regions of operation, a power flow analysis, and a method to regulate the dc-link voltages using the voltage vector redundancies are given. In the first version of this paper, two pulsewidth modulation (PWM) techniques (including space vector PWM) and a control system were provided. The proposed topology is compared with two conventional systems in terms of operation range, harmonic distortions, and semiconductor losses. Simulation and experimental results are provided to validate the feasibility of the system. [ABSTRACT FROM AUTHOR]

This paper investigates the contribution of each order inductance harmonic to the torque (both average torque and torque ripple) of multiphase doubly salient synchronous reluctance machines (DS-SRMs). Such machines are similar to switched reluctance machines but supplied with sine wave currents. The investigations in this paper are as follows. First, a general analytical torque model based on Fourier series analysis of inductances has been built for machines with different phase numbers, slot/pole number combinations, and also winding configurations. The instantaneous torque for DS-SRMs with any given phase number can then be accurately predicted. Using such model, contribution of each order inductance harmonic to torque can be investigated separately. It is found that the torque ripple frequency of the DS-SRM only depends on phase number. For example, for an m-phase machine, there will be m $\times $ kth-order torque ripple if mod(mk, 2) = 0, where m is the phase number and k is a natural number. This paper also explains why certain phase numbers inherently produce lower torque ripple than others. The findings in this paper provide a future direction for potential torque ripple reduction methods either from machine design or advanced control. The simulations have been validated by experiments using a six-phase DS-SRMs. [ABSTRACT FROM AUTHOR]

Simulating the interaction of RF-waves with charged particle beams is difficult and computationally expensive, even on present high-end computers. There is a tradeoff between fidelity and complexity/expense of the two primary techniques, particle-in-cell and envelope methods. This paper presents an approach based on the partial decomposition of the Maxwell equations to achieve a fully second-order set of ordinary differential equations (ODEs) describing the interaction. It has the potential for self-consistent inclusion of ac and dc space-charge effects through a solution of evanescent ODEs, effects that are handled poorly, if at all, by existing envelope methods. The resulting technique provides flexibility in adjusting simulation fidelity versus computational costs. The developments presented in this paper establish a mathematical framework for this technique and test its core aspects by demonstrating accurate solution of the ODEs using analytic sources. [ABSTRACT FROM AUTHOR]

Power line harmonic radiation (PLHR) is an artificial electromagnetic pollution source in the near-earth space environment. Up until now, there has been little quantitative research on its formation mechanism. This paper details a model and solver for electromagnetic waves propagation in a stratified anisotropic ionosphere. In our model, these electromagnetic waves are generated by an arbitrary electric dipole source above a nonideal conductive ground. The matrix-exponent method and a full-wave method are combined to analyze the model, avoiding the problem of numerical overflow and swamping in numerical calculations. The computing results obtained from the proposed method and the observed electric field data by using DEMETER satellite are compared and found to be in good agreement. Furthermore, this paper considers the effects on PLHR propagation in the ionosphere due to dipole source frequency, earth’s conductivity, electron density, geographic latitude, and geomagnetic field orientation. Results show that when the frequency increases, the strength of PLHR penetrating into the ionosphere has an increasing tendency. If the harmonic current remains constant, lower ground conductivity and electron density of the ionosphere result in higher radiation power. PLHR propagates along the direction of the geomagnetic field in the ionosphere, and its strength decreases with the increasing geomagnetic inclination at the same height. In addition, the radiation power of less than 1 W may trigger PLHR. [ABSTRACT FROM AUTHOR]