Search

Satellite communication (SatCom) is an essential component of next-generation wireless communication to achieve a goal of ubiquitous connectivity on globe. The outage event of SatCom link connecting to a network is more critical in an infrastructure-deficient remote area. In this paper, we analyze outage probability (OP) and symbol error rate (SER) over SatCom downlink channels when the users are randomly located in single beam and multibeam area. The downlink beams will suffer from propagation loss and the shadowed-Rician fading depending on the user location which is assumed to follow a Poisson point process. For mathematically tractable, informative, and insightful interpretation, we obtain the asymptotic OP and SER expressions of user link under several channel conditions in the high power regime. Finally, numerical results are presented to verify the analysis and show the accuracy of the asymptotic results. [ABSTRACT FROM AUTHOR]

Ambient radio frequency (RF) energy harvesting is widely promoted as an enabler for wireless-power Internet of Things (IoT) networks. This article jointly characterizes energy harvesting and packet transmissions in grant-free opportunistic uplink IoT networks energized via harvesting downlink energy. To do that, a joint queuing theory and stochastic geometry model is utilized to develop a spatio-temporal analytical model. Particularly, the harvested energy and packet transmission success probability are characterized using tools from stochastic geometry. Moreover, each device is modeled using a two-dimensional discrete-time Markov chain (DTMC). Such two dimensions are utilized to jointly track the scavenged/depleted energy to/from the batteries along with the arrival/departure of packets to/from devices buffers over time. Consequently, the adopted queuing model represents the devices as spatially interacting queues. To that end, the network performance is assessed in light of the packet throughput, the average delay, and the average buffer size. The effect of base stations (BSs) densification is discussed and several design insights are provided. The results show that the parameters for uplink power control and opportunistic channel access should be jointly optimized to maximize average network packet throughput, and hence, minimize delay. [ABSTRACT FROM AUTHOR]

Simultaneous co-channel transmission and reception, denoted as in-band full-duplex (FD) communications, has been promoted as a solution to improve the spectral efficiency in wireless networks. For cellular networks, in addition to the existing aggregate interference in half-duplex transmission, the residual self-interference and cross-mode interference [i.e., between uplink (UL) and downlink (DL)] impose major obstacles for FD communications’ deployment. Although the FD communication’s promising impact on the overall network data rate has been established in the literature, the rate gains are achieved in the DL transmissions at the expense of marginal gain, or even degradation, for the UL transmissions. This paper, therefore, focuses on the analysis of UL ergodic rate in FD cellular networks where a minimum distance between BSs using the same time-frequency resource block is imposed. Hence, the mutually interfering BSs’ locations are modeled by Matérn hard core point process. The distribution of the aggregate interference and the channel-to-interference-plus-noise ratio at the UL of a typical user are characterized using a stochastic geometry analysis. Several UL power control techniques are presented and their resulting ergodic rates are derived and compared. The simulation results suggest that the UL performance highly depends on the network parameters and the UL power control techniques. [ABSTRACT FROM AUTHOR]

A network model is considered, where Poisson distributed base stations transmit to $N$ power-domain non-orthogonal multiple access (NOMA) users (UEs) each that employ successive interference cancellation (SIC) for decoding. We propose three models for the clustering of NOMA UEs and consider two different ordering techniques for the NOMA UEs: mean signal power-based and instantaneous signal-to-intercell-interference-and-noise-ratio-based. For each technique, we present a signal-to-interference-and-noise ratio analysis for the coverage of the typical UE. We plot the rate region for the two-user case and show that neither ordering technique is consistently superior to the other. We propose two efficient algorithms for finding a feasible resource allocation that maximize the cell sum rate $\mathcal {R}_{\mathrm{ tot}}$ , for general $N$ , constrained to: 1) a minimum throughput $\mathcal {T}$ for each UE, 2) identical throughput for all UEs. We show the existence of: 1) an optimum $N$ that maximizes the constrained $\mathcal {R}_{\mathrm{ tot}}$ given a set of network parameters and 2) a critical SIC level necessary for NOMA to outperform orthogonal multiple access. The results highlight the importance in choosing the network parameters $N$ , the constraints, and the ordering technique to balance the $\mathcal {R}_{\mathrm{ tot}}$ and fairness requirements. We also show that interference-aware UE clustering can significantly improve performance. [ABSTRACT FROM AUTHOR]

The Internet-of-Things (IoT) is the paradigm where anything will be connected. There are two main approaches to handle the surge in uplink (UL) traffic that the IoT is expected to generate, namely, scheduled UL (SC-UL) and random access uplink (RA-UL) transmissions. SC-UL is perceived as a viable tool to control quality-of-service levels while entailing some overhead in the scheduling request prior to any UL transmission. On the other hand, RA-UL is a simple single-phase transmission strategy. While this obviously eliminates scheduling overheads, very little is known about the scalability of RA-UL. At this critical junction, there is a dire need to analyze the scalability of these two paradigms. To that end, this paper develops a spatiotemporal mathematical framework to analyze and assess the performance of SC-UL and RA-UL. The developed paradigm jointly utilizes stochastic geometry and queuing theory. Based on such a framework, we show that the answer to the scheduling versus random access paradox actually depends on the operational scenario. Particularly, the RA-UL scheme offers low access delays but suffers from limited scalability, i.e., cannot support a large number of IoT devices. On the other hand, SC-UL transmission is better suited for higher device intensities and traffic rates. [ABSTRACT FROM AUTHOR]

This paper develops an interference aware design for cooperative hybrid automatic repeat request (HARQ)-assisted non-orthogonal multiple access (NOMA) scheme for large-scale device-to-device (D2D) networks. Specifically, interference aware rate selection and power allocation are considered to maximize long term average throughput (LTAT) and area spectral efficiency. The design framework is based on stochastic geometry that jointly accounts for the spatial interference correlation at the NOMA receivers as well as the temporal interference correlation across HARQ transmissions. It is found that ignoring the effect of the aggregate interference, or overlooking the spatial and temporal correlation in interference, highly overestimates the NOMA performance and produces misleading design insights. An interference oblivious selection for the power and/or transmission rates leads to violating the network outage constraints. To this end, the results demonstrate the effectiveness of NOMA transmission and manifest the importance of the cooperative HARQ to combat the negative effect of the network aggregate interference. For instance, comparing to the non-cooperative HARQ-assisted NOMA, the proposed scheme can yield an outage probability reduction by 21%. Furthermore, an interference aware optimal design that maximizes the LTAT given outage constraints leads to 17% throughput improvement over HARQ-assisted orthogonal multiple access scheme. [ABSTRACT FROM AUTHOR]

Cache-enabled small base station (SBS) densification is foreseen as a key component of 5G cellular networks. This architecture enables storing popular files at the network edge (i.e., SBS caches), which empowers local communication and alleviates traffic congestion at the core/backhaul network. This paper develops a mathematical framework, based on stochastic geometry, to characterize the hit probability in multi-channel cache-enabled 5G networks with both unicast/multicast capabilities and opportunistic spectrum access. To this end, we first derive the hit probability by characterizing the opportunistic spectrum access success probabilities, service distance distributions, and coverage probabilities. An optimization framework for file caching is then developed to maximize the hit probability. To this end, a simple concave approximation for the hit probability is proposed, which highly reduces the optimization complexity and leads to a closed-form solution. The sub-optimal solution is benchmarked against two widely employed caching distribution schemes, namely, uniform and Zipf caching, through numerical results and extensive simulations. It is shown that the caching strategy should be adapted to the network parameters and capabilities. For instance, diversifying file caching according to the Zipf distribution is better in multicast systems with large number of channels. However, when the number of channels is low and/or the network is restricted to unicast transmissions, it is better to confine caching to the most popular files only. [ABSTRACT FROM AUTHOR]

This letter studies the mobility aware user-to-base station (BS) association policies, within a stochastic geometry framework, in two-tier uplink cellular networks with fractional channel inversion power control. Particularly, we model the BSs’ locations using the widely accepted Poisson point process and obtain the coverage probability and handover cost expressions for the coupled and decoupled uplink and downlink associations. To this end, we compute the average throughput for the mobile users and study the merits and demerits of each association strategy. [ABSTRACT FROM PUBLISHER]

The Internet of Things (IoT) is large scale by nature, which is manifested by the massive number of connected devices as well as their vast spatial existence. Cellular networks, which provide ubiquitous, reliable, and efficient wireless access, will play fundamental rule in delivering the first-mile access for the data tsunami to be generated by the IoT. However, cellular networks may have scalability problems to provide uplink connectivity to massive numbers of connected things. To characterize the scalability of cellular uplink in the context of IoT networks, this paper develops a traffic-aware spatiotemporal mathematical model for IoT devices supported by cellular uplink connectivity. The developed model is based on stochastic geometry and queueing theory to account for the traffic requirement per IoT device, the different transmission strategies, and the mutual interference between the IoT devices. To this end, the developed model is utilized to characterize the extent to which cellular networks can accommodate IoT traffic as well as to assess and compare three different transmission strategies that incorporate a combination of transmission persistency, backoff, and power-ramping. The analysis and the results clearly illustrate the scalability problem imposed by IoT on cellular network and offer insights into effective scenarios for each transmission strategy. [ABSTRACT FROM PUBLISHER]

While network densification is considered an important solution to cater the ever-increasing capacity demand, its effect on the handover (HO) rate is overlooked. In dense 5G networks, HO delays may neutralize or even negate the gains offered by network densification. Hence, user mobility imposes a nontrivial challenge to harvest capacity gains via network densification. In this paper, we propose a velocity-aware HO management scheme for two-tier downlink cellular network to mitigate the HO effect on the foreseen densification throughput gains. The proposed HO scheme sacrifices the best base station (BS) connectivity, by skipping HO to some BSs along the user trajectory, to maintain longer connection durations and reduce HO rates. Furthermore, the proposed scheme enables cooperative BS service and strongest interference cancellation to compensate for skipping the best connectivity. To this end, we consider different HO skipping scenarios and develop a velocity-aware mathematical model, via stochastic geometry, to quantify the performance of the proposed HO schemes in terms of the coverage probability and user throughput. The results highlight the HO rate problem in dense cellular environments and show the importance of the proposed HO schemes. Finally, the value of BS cooperation along with handover skipping is quantified for different user mobility profiles. [ABSTRACT FROM PUBLISHER]

This paper presents a unified mathematical paradigm, based on stochastic geometry, for downlink cellular networks with multiple-input-multiple-output (MIMO) base stations. The developed paradigm accounts for signal retransmission upon decoding errors, in which the temporal correlation among the signal-to-interference-plus-noise ratio (SINR) of the original and retransmitted signals is captured. In addition to modeling the effect of retransmission on the network performance, the developed mathematical model presents twofold analysis unification for the MIMO cellular networks literature. First, it integrates the tangible decoding error probability and the abstracted (i.e., modulation scheme and receiver type agnostic) outage probability analysis, which are largely disjoint in the literature. Second, it unifies the analysis for different MIMO configurations. The unified MIMO analysis is achieved by abstracting unnecessary information conveyed within the interfering signals by Gaussian signaling approximation along with an equivalent SISO representation for the per-data stream SINR in the MIMO cellular networks. We show that the proposed unification simplifies the analysis without sacrificing the model accuracy. To this end, we discuss the diversity-multiplexing tradeoff imposed by different MIMO schemes and shed light on the diversity loss due to the temporal correlation among the SINRs of the original and retransmitted signals. Finally, several design insights are highlighted. [ABSTRACT FROM PUBLISHER]

The unrelenting increase in the population of mobile users and their traffic demands drive cellular network operators to densify their network infrastructure. Network densification shrinks the footprint of base stations (BSs) and reduces the number of users associated with each BS, leading to an improved spatial frequency reuse and spectral efficiency, and thus, higher network capacity. However, the densification gain comes at the expense of higher handover rates and network control overhead. Hence, user’s mobility can diminish or even nullifies the foreseen densification gain. In this context, splitting the control plane ( $C$ -plane) and user plane ( $U$ -plane) is proposed as a potential solution to harvest densification gain with reduced cost in terms of handover rate and network control overhead. In this paper, we use stochastic geometry to develop a tractable mobility-aware model for a two-tier downlink cellular network with ultra-dense small cells and $C$ -plane/ $U$ -plane split architecture. The developed model is then used to quantify the effect of mobility on the foreseen densification gain with and without $C$ -plane/ $U$ -plane split. To this end, we shed light on the handover problem in dense cellular environments, show scenarios where the network fails to support certain mobility profiles, and obtain network design insights. [ABSTRACT FROM PUBLISHER]

In-band full-duplex (FD) communications have been optimistically promoted to improve the spectrum utilization and efficiency. However, the penetration of FD communications to the cellular networks domain is challenging due to the imposed uplink/downlink interference. This paper presents a tractable framework, based on stochastic geometry, to study FD communications in cellular networks. Particularly, we assess the FD communications effect on the network performance and quantify the associated gains. This paper proves the vulnerability of the uplink to the downlink interference and shows that FD rate gains harvested in the downlink (up to 97%) come at the expense of a significant degradation in the uplink rate (up to 94%). Therefore, we propose a novel fine-grained duplexing scheme, denoted as the $\alpha $ -duplex scheme, which allows a partial overlap between the uplink and the downlink frequency bands. We derive the required conditions to harvest rate gains from the $\alpha $ -duplex scheme and show its superiority to both the FD and half-duplex (HD) schemes. In particular, we show that the $\alpha $ -duplex scheme provides a simultaneous improvement of 28% for the downlink rate and 56% for the uplink rate. Finally, we show that the amount of the overlap can be optimized based on the network design objective. [ABSTRACT FROM PUBLISHER]

Full-duplex (FD) communication is optimistically promoted to double the spectral efficiency if sufficient self-interference cancellation (SIC) is achieved. However, this is not true when deploying FD-communication in a large-scale setup due to the induced mutual interference. Therefore, a large-scale study is necessary to draw legitimate conclusions about gains associated with FD-communication. This paper studies the FD operation for underlay device-to-device (D2D) communication sharing the uplink resources in cellular networks. We propose a disjoint fine-tuned selection criterion for the D2D and FD modes of operation. Then, we develop a tractable analytical paradigm, based on stochastic geometry, to calculate the outage probability and rate for cellular and D2D users. The results reveal that even in the case of perfect SIC, due to the increased interference injected to the network by FD-D2D communication, having all proximity UEs transmit in FD-D2D is not beneficial for the network. However, if the system parameters are carefully tuned, non-trivial network spectral-efficiency gains (64% shown) can be harvested. We also investigate the effects of imperfect SIC and D2D-link distance distribution on the harvested FD gains. [ABSTRACT FROM PUBLISHER]

Backward compatibility is an essential ingredient for the success of new technologies. In the context of in-band full-duplex (FD) communication, FD base stations (BSs) should support half-duplex (HD) users’ equipment (UEs) without sacrificing the foreseen FD gains. This paper presents flexible and tractable modeling framework for multi-tier cellular networks with FD BSs and FD/HD UEs. The presented model is based on stochastic geometry and accounts for the intrinsic vulnerability of uplink transmissions. The results show that FD UEs are not necessarily required to harvest rate gains from FD BSs. In particular, the results show that adding FD UEs to FD BSs offers a maximum of 5% rate gain over FD BSs and HD UEs case if multi-user diversity is exploited, which is a marginal gain compared with the burden required to implement FD transceivers at the UEs’ side. To this end, we shed light on practical scenarios where HD UEs operation with FD BSs outperforms the operation when both the BSs and UEs are FD and we find a closed-form expression for the critical value of the self-interference attenuation power required for the FD UEs to outperform HD UEs. [ABSTRACT FROM AUTHOR]

Stochastic geometry analysis for cellular networks is mostly limited to outage probability and ergodic rate, which abstract many important wireless communication aspects. Recently, a novel technique based on the Equivalent-in-Distribution (EiD) approach is proposed to extend the analysis to capture these metrics and analyze bit error probability (BEP) and symbol error probability (SEP). However, the EiD approach considerably increases the complexity of the analysis. In this letter, we propose an approximate yet accurate framework, that is also able to capture fine wireless communication details similar to the EiD approach, but with simpler analysis. The proposed methodology is verified against the exact EiD analysis in both downlink and uplink cellular networks scenarios. [ABSTRACT FROM PUBLISHER]

Device-to-device (D2D) communication enables the user equipments (UEs) located in close proximity to bypass the cellular base stations (BSs) and directly connect to each other, and thereby, offload traffic from the cellular infrastructure. D2D communication can improve spatial frequency reuse and energy efficiency in cellular networks. This paper presents a comprehensive and tractable analytical framework for D2D-enabled uplink cellular networks with a flexible mode selection scheme along with truncated channel inversion power control. The developed framework is used to analyze and understand how the underlaying D2D communication affects the cellular network performance. Through comprehensive numerical analysis, we investigate the expected performance gains and provide guidelines for selecting the network parameters. [ABSTRACT FROM PUBLISHER]