Search

The chances of a global hydrogen economy becoming a reality have increased significantly since the COVID pandemic and the war in Ukraine, and for net zero carbon emissions. However, intercontinental hydrogen transport is still a major issue. This study suggests transporting hydrogen as a gas at atmospheric pressure in balloons using the natural flow of wind to carry the balloon to its destination. We investigate the average wind speeds, atmospheric pressure, and temperature at different altitudes for this purpose. The ideal altitudes to transport hydrogen with balloons are 10 km or lower, and hydrogen pressures in the balloon vary from 0.25 to 1 bar. Transporting hydrogen from North America to Europe at a maximum 4 km altitude would take around 4.8 days on average. Hydrogen balloon transportation cost is estimated at 0.08 USD/kg of hydrogen, which is around 12 times smaller than the cost of transporting liquified hydrogen from the USA to Europe. Due to its reduced energy consumption and capital cost, in some locations, hydrogen balloon transportation might be a viable option for shipping hydrogen compared to liquefied hydrogen and other transport technologies. [Display omitted] • A new approach to transporting hydrogen with balloons. • Possible paths for hydrogen balloon transportation. • Estimation of the optimum altitude to transport hydrogen in balloons. • The global potential for hydrogen balloon transportation is accessed. [ABSTRACT FROM AUTHOR]

This paper presents the first systematic study on power control strategies for Modular-Gravity Energy Storage (M-GES), a novel, high-performance, large-scale energy storage technology with significant research and application potential. Addressing the current research gap in M-GES power control technology, we propose two corresponding compensation modes and several power control strategies for Hybrid M-GES and M-GES. The effectiveness of these strategies is validated through simulations on the MATLAB/Simulink platform, including tests using sinusoidal power and feasibility verification based on a natural California load curve. Additionally, we analyze the normal and abnormal operating conditions of M-GES. In conclusion, the characteristics of the proposed control strategies are summarized, providing a guideline for further research. [Display omitted] • Modular-gravity energy storage (M-GES) power control system studied. • Two compensation modes and four control strategies are systematically studied and validated. • The center switching method with hysteresis control (CSM-H) excels in continuous compensation mode. • The center switching method with hysteresis control and dead zone (CSM-HD) excels in overlap compensation mode. • Based on the power control system proposed in this paper, the M-GES plant performs highly in natural power systems. [ABSTRACT FROM AUTHOR]

The global concern to reduce greenhouse gas emissions and increase the use of renewable sources has led Brazil to stand out as a promising nation in this context, with a large portion of its energy capacity coming from renewable sources. However, renewable sources have the disadvantage of intermittency and seasonality, which has prompted the search for solutions to these challenges. This study assesses the feasibility of integrating hydro and solar power with a Hydrogen-based Electrical Energy Storage System (H 2 EESS) at the Serra da Mesa hydroelectric Brazilian power plant. Hydrogen would be produced through water electrolysis, taking advantage of the available excess renewable energy, and subsequently converted back into electricity through fuel cells. The integration of hydro and solar power with H 2 EESS resulted in an increase of 11.10 % in the energy produced compared to conventional hydroelectric generation, with 36.06 % of this increase coming from H 2 EESS. Additionally, there was a 9.71 % increase in the utilization of substation capacity. These results highlight the feasibility and benefits of integrating hydro and solar power with H 2 EESS. This approach allows for maximizing renewable energy generation, reducing greenhouse gas emissions, and better utilizing available resources without the need for significant infrastructure investments. • Feasibility of integrating hydro and solar power with a hydrogen-based electrical energy storage system. • Case Study with real data from Serra da Mesa hydroelectric brazilian power plant. • The integration of hydro and solar power with Hydrogen resulted in an increase of 11.10 % in the energy produced compared to conventional hydroelectric generation. • There was a 9.71 % increase in the utilization of substation capacity. [ABSTRACT FROM AUTHOR]

The global transition to renewable energy is driven by the fight against climate change. Wind power plays a crucial role in reducing dependence on fossil fuels and greenhouse gas emissions. Therefore, addressing uncertainties in wind speed variations requires innovative solutions. This study proposes a Bayesian-based approach using a Dynamic Factor Model to generate synthetic monthly average wind speed series. The Dynamic Factor Model framework captures temporal and spatial correlations, improving wind resource representation in operational planning models. The model's autoregressive configuration with common factors, prior distributions, and Bayesian inference techniques enhances predictive capabilities. Validation exercises confirm the model's reliability, accurately capturing seasonal oscillations and spatial correlations across eight wind farms. The study highlights the usefulness of the Dynamic Factor Model in evaluating wind projects and optimizing energy generation strategies, effectively mitigating wind uncertainty, and facilitating renewable energy integration in Brazil's power mix. [ABSTRACT FROM AUTHOR]

Modular Gravity Energy Storage (M-GES) systems are emerging as a pivotal solution for large-scale renewable energy storage, essential for advancing green energy initiatives. This study introduces innovative capacity configuration strategies for M-GES plants, namely Equal Capacity Configuration (EC) and Double-Rate Capacity Configuration (DR), tailored to optimize energy storage efficiency and stability. Through comprehensive MATLAB/Simulink simulations, we demonstrate each configuration's distinct power characteristics and operational advantages. Our findings reveal that while the EC configuration offers enhanced power accuracy and stability, it requires a larger number of units. In contrast, the DR configuration, characterized by fewer but larger units, shows a trade-off with reduced power stability. This paper contributes significantly to the field by presenting a first-of-its-kind comparative analysis of these configurations, offering insights into their practical applications and scalability. The proposed strategies and findings lay a foundation for future research and development in gravity energy storage systems, marking a step forward in pursuing sustainable and reliable energy solutions. [Display omitted] • Two typical unit capacity configuration strategies for M-GES power plants are proposed. • The unit scheduling method of the M-GES power plant is proposed. • The coordination control method is provided for each proposed configuration strategy. • Equal capacity configuration has better power accuracy but requires more units. • Double rate configuration needs fewer but larger units and less power stability. [ABSTRACT FROM AUTHOR]

Implementing Circular Economy (CE) strategies has recently become one of the essential strategies for sustainable development and corporate social responsibility. However, despite the promising role and potential benefits of the CE for companies and society, there has still been insufficient analysis examining the challenges for circular transition faced by micro, small, and medium-sized enterprises (MSMEs) and the role that standards, such as British Standard (BS) 8001:2017, play during the transition process from linear to circular economy practices. Given this context and to further increase our understanding of the factors preventing the transition from linear to CE, this study aims to assess the CE implementation in MSMEs in developing economies in light of BS 8001:2017 through a survey with Brazilian MSMEs. The primary findings emphasize that CE practices from the Administration dimension occupied top positions in the ranking of implementation, along with one practice from the Innovation dimension. However, the results show that several practices associated with Transparency and Product Optimization in the value chain held the last level of evidence of implementation. Findings suggest that assessing MSMEs through BS 8001:2017 is beneficial for aiding them in analysing and reconsidering their practices related to the conventional linear business models of take-use-dispose. Collectively, the findings improve our understanding of the level of adoption of CE components implementation, the most and the least adopted practices during the CE transition. The study also provides implications for policy, theory, and practical applications in cases where there is an interest in assessing the maturity of CE implementation within MSMEs in developing economies. [ABSTRACT FROM AUTHOR]