Search

The global energy system is in transition. It is attempting to reach net‐zero greenhouse gas emissions by 2050. The systemic changes mean that the role of bioenergy will change. The potential of bioenergy to make a flexible contribution to the energy system is key for the achievement of global emission reduction ambitions and the functioning of the low‐carbon energy system and economy. As the volume of sustainably available biomass resources is limited, defining the contributions from bioenergy to a low‐carbon energy system and finding balances – and ideally synergies – between the different possible energy and climate system services that biomass can provide will be very important. The recognized system services include, among others, the flexible operation of bioenergy plants to integrate variable renewable energy sources and to provide negative carbon dioxide (CO2) emissions. Interest in flexible operation of bioenergy value chains, bioenergy with carbon capture and utilization as well as synergies with renewable hydrogen‐based value chains has increased recently. The objective of this paper is to present a holistic definition of flexible bioenergy as a system service based on the work conducted in International Energy Agency (IEA) Bioenergy Technology Collaboration Programme's Task 44 Flexible Bioenergy and System Integration, and to provide some practical examples. The paper also presents the different bioenergy system services and considers their definitions and interactions, as this is important in energy system design. The definition of flexible bioenergy shows that the flexibility provision from bioenergy goes far beyond the traditional definition of providing short‐term flexibility in the power sector. Indicators to demonstrate the value of services as well as further quantitative assessment of synergies and trade‐offs are needed to valorize the different services from bioenergy and create viable business cases. [ABSTRACT FROM AUTHOR]

CO2 huff and puff is a widely used enhanced oil recovery method in many oil fields, but its implementations in shale fields is scarce. This paper reports trials of CO2 huff and puff in a shale field in China. Laboratory studies revealed that CO2 effectively reduced oil viscosity, increased oil volume, and improved oil recovery under miscible conditions. For the three wells that received CO2 huff and puff treatments, one well showed satisfactory results, while the other two wells demonstrated poor economics. Discussions and recommendations are made based on field experiences. © 2024 Society of Chemical Industry and John Wiley & Sons, Ltd. [ABSTRACT FROM AUTHOR]

We present a cost model for implementing a deployment scale effort for conducting ocean iron fertilization (OIF) for marine‐based carbon dioxide removal (CDR). The model incorporates basic oceanographic parameters critical for estimating the effective export of newly fixed CO2 into biomass that is stimulated by Fe addition to an Fe‐limited region of the Southern Ocean. Estimated costs can vary by nearly 100‐fold between best‐case and worst‐case scenarios, with best‐case values of $7/net tonne C captured versus worst‐case $1,500/net tonne C captured, without accounting for verification costs. Primary oceanographic factors that influence cost are the net primary productivity increases achieved via OIF, the amount of C exported into the deep ocean, and the amount of CO2 ventilated back to the atmosphere. The model compares ship‐based versus aerial delivery of Fe to the ocean, and estimates aerial delivery can be 30%–40% more cost effective; however, the specific requirements for aerial delivery require additional research and development. The model also estimates costs associated with verification and environmental monitoring of OIF. These costs increase $/net tonne C captured by 3–4‐fold. Best, intermediate, and worst cases for aerial delivery and ship delivery are $21, $83, $2,033, and $24, $94, $4,691, respectively, inclusive of verification costs. The primary goal of this model is to demonstrate the variability in cost of OIF as a CDR method, and to better understand where additional research is needed to determine the major factors that may make OIF a tractable, nature‐based CDR method. Plain Language Summary: This paper presents a basic cost model for undertaking ocean iron fertilization (OIF) as a means of removing carbon dioxide from the atmosphere. It presents a simple application scenario that compares two different modes for delivering iron to the ocean, plane‐based and ship‐based, and estimates costs associated with verification of carbon export into the deep ocean, as well as assessing the environmental changes that may occur as result. Key findings are that, in terms of USD/tonnes carbon exported, OIF can be at the lower cost end (

The process of preparing methanol from carbon dioxide is one of the ways to solve the environmental problems caused by greenhouse gases, the problem of fossil energy depletion, and the problem of fuel exhaust emissions. However, after decades of development, the process of preparing methanol from carbon dioxide is still unable to achieve large‐scale industrialization. This critical review sharply points out the problems and obstacles that need to be solved urgently on the industrialization road of carbon dioxide methanol preparation process and summarizes its progress. The problems faced by the methanol production industry from carbon dioxide are first the thermodynamic constraints, second the lower reaction rate and conversion effect, and finally the energy loss. In order to solve these problems, this paper first introduces the active sites, structural effects, and dynamic changes of copper‐based catalysts, as well as the unique reaction mechanism and doping modification of indium‐based catalysts. Zinc and zirconium promoters and some metal oxide supports can form unique interactions with active components to improve the catalytic performance of the catalyst. Next, various kinetic models and applications of methanol production from carbon dioxide are summarized, which is an important bridge linking laboratory and industrialization; the advantages and disadvantages of fixed bed reactor and paddle reactor were compared. Finally, the full text is summarized and prospected. [ABSTRACT FROM AUTHOR]

As carbon monoxide has a broad spectrum of biological activities, its production by plasma is a significant advantage in medicine. This paper presents a comparative study of the CO production of two plasma jets: a MHz‐jet and a kHz‐jet. Both were fed with a helium gas with CO2 ${\text{CO}}_{2}$ admixture (0%–1%). CO was produced by CO2 ${\text{CO}}_{2}$ dissociation and its maximal concentration was hundreds of parts per million, which is safe for clinical applications. For the same specific energy input, the CO production was more efficient for the kHz‐jet than the MHz‐jet. Both had antibacterial properties on Escherichia coli, and the addition of CO2 ${\text{CO}}_{2}$ improved them for the MHz‐jet, while it reduced them for the kHz‐jet. [ABSTRACT FROM AUTHOR]

Across Europe, countries are reducing CO2 emissions and energy demand by lowering the temperature in public office buildings. These measures affect men and women unequally because the latter prefer and, indeed, perform better under higher temperatures than the standard temperature. Lowering the temperature thus further increases an already existing inequality. We show that the philosophical literature on discrimination provides an interesting theoretical approach to understanding such measures. On prominent understandings of what discrimination is, the policy would be considered direct discrimination against women if it could be shown to reflect a broader inattentiveness to the needs of women in society. Alternatively, and more straightforwardly, the policies can be considered indirect discrimination because of their disparate effects on men and women. The final part of the paper shows that the policies are also wrong for the reasons it is often argued that discrimination is wrong—to wit, that it harms or disrespects those who are discriminated against. The final section suggests a range of measures to offset the discriminatory aspects of the policy. [ABSTRACT FROM AUTHOR]

Multiphysics inversion exploits different types of geophysical data that often complement each other and aims to improve overall imaging resolution and reduce uncertainties in geophysical interpretation. Despite the advantages, traditional multiphysics inversion is challenging because it requires a large amount of computational time and intensive human interactions for preprocessing data and finding trade‐off parameters. These issues make it nearly impossible for traditional multiphysics inversion to be applied as a real‐time monitoring tool for geological carbon storage. In this paper, we present a deep learning (DL) multiphysics network for imaging CO2 saturation in real time. The multiphysics network consists of three encoders for analysing seismic, electromagnetic and gravity data and shares one decoder for combining imaging capabilities of the different geophysical data for better predicting CO2 saturation. The network is trained on pairs of CO2 label models and multiphysics data so that it can directly image CO2 saturation. We use the bootstrap aggregating method to enhance the imaging accuracy and estimate uncertainties associated with CO2 saturation images. Using realistic CO2 label models and multiphysics data derived from the Kimberlina CO2 storage model, we evaluate the performance of the deep learning multiphysics network and compare its imaging results to those from the deep learning single‐physics networks. Our modelling experiments show that the deep learning multiphysics network for seismic, electromagnetic, and gravity data not only improves the imaging accuracy but also reduces uncertainties associated with CO2 saturation images. Our results also suggest that the deep learning multiphysics network for the non‐seismic data (i.e., electromagnetic and gravity) can be used as an effective low‐cost monitoring tool in between regular seismic monitoring. [ABSTRACT FROM AUTHOR]

This document is a response to concerns raised by Reershemius and Suhrhoff regarding a study conducted by Kantola et al. The authors of the response acknowledge that Reershemius and Suhrhoff did not find any faults with the derivation in the paper, which they state are factually true. They also mention that Reershemius and Suhrhoff arrived at a similar result in their own unpublished work. The response addresses specific implementation details raised by Reershemius and Suhrhoff and argues that these concerns lack merit. The authors appreciate the constructive engagement and transparency of data. [Extracted from the article]