Search

With the rapid development of global energy transformation and new power system, ensuring the stability of distributed energy grid connections is the key to maintaining the reliable operation of the whole power system. This paper constructs detailed impedance models of grid-following (GFL) and grid-forming (GFM) inverters using a harmonic linearization method and thoroughly investigates the mechanisms of resonance when inverters are connected to the grid, as well as the impact of model parameters on the stability of the grid system. This paper also briefly analyzes the scenario where distributed energy and electric vehicles are integrated into the grid simultaneously, demonstrating that grid system stability can be ensured in complex grid situations through reasonable parameter design. Lastly, the accuracy of the proposed impedance models and analysis is verified through MATLAB/Simulink simulations. [ABSTRACT FROM AUTHOR]

The main contribution of this paper is to present a simple algorithm that theoretically and numerically assesses the switching angles of an inverter operated with the SPWM technique. This technique is the most widely used for eliminating harmonics in DC-AC converters for powering motors, renewable energy applications, household appliances, etc. Unlike conventional implementations of the SPWM technique based on the analog or digital comparison of a sinusoidal signal with a triangular signal, this paper mathematically performs this comparison. It proposes a simple solution to solve the transcendental equations arising from the mathematical analysis numerically. The technique is validated by calculating the total harmonic distortion (THD) of the generated signal theoretically and numerically, and the results indicate that the calculated angles produce the same distribution of harmonics calculated analytically and numerically. The algorithm is limited to single-phase inverters with unipolar SPWM. [ABSTRACT FROM AUTHOR]

The application of electrochemical cells as a source unit of electrical energy is rapidly growing—used in electric vehicles and other electric mobility devices, as well as in energy supply systems—as energy storage, often together with renewable energy sources. The key element of such systems is the power electronic converter used for DC energy storage and AC grid interfacing. It should be bidirectional to charge and discharge the battery when it is necessary. Two-stage battery interface converters are the most common; their DC-DC stage controls the battery current and adjusts voltage, but the DC-AC stage (inverter or frontend) controls the current in the grid. The use of unfolding inverters in two-stage battery interfaces can have some advantages. In this case, the DC-DC converter produces half-sinewave pulsating voltages and currents, but the unfolding circuit changes the polarity of the voltages and currents and produces no switching losses. Another trend of modern power electronics is the principle of partial power processing. In this case, power electronic converters deal only with a part of the total power; therefore, losses in such converters are reduced. This paper considers combining unfolding frontends with partial power DC-DC converters that enable the further reduction in losses. In this paper, it is shown that such implementation of the partial power conversion principle in semi-DC-AC systems is really possible based on the real-time matching of the voltage of the partial-power DC-DC converter, battery voltage (which depends on its state of charge) and the rectified instantaneous voltage of the AC grid. [ABSTRACT FROM AUTHOR]

This paper presents a single-phase Full-Bridge (FB) inverter with a hybrid commutation technique designed to reduce the harmonic distortion caused by the loss of the controller capability around the zero-crossing point in the unipolar commutation region. The hybrid modulation changes from unipolar to bipolar commutation under the loss of the reference control, improving the robustness and efficiency of the method. The commutation technique improves the switching performance and reduces the switching losses. Simulation models are developed in MATLAB/Simulink R2023b to evaluate their performance under different operating conditions. The results show that the proposed commutation technique can achieve high efficiency, low total harmonic distortion (THD), and fast dynamic response. The experimental implementation of sliding mode control (SMC) implemented in an STM32 microcontroller confirms that the hybrid commutation technique can reduce the THD by 0.96 percentage points for local (off-grid) loads and up to 2.45 in an industrial grid-tie network, compared with unipolar commutation. These findings highlight the potential of the proposed modulation technique for applications like solar panels and offer crucial insights for ongoing research and development in this field. [ABSTRACT FROM AUTHOR]

As the penetration of distributed generation (DG) systems in the grid is increasing, the challenge of combining large numbers of DGs in the power systems has to be carefully clarified and managed. The control strategy and management concept of the interconnected systems should be flexible and reliable to handle the various types of DGs. This can be suitably met by microgrids. This paper introduces the microgrid structure and elements and states the main objectives that should be achieved by the microgrid controllers and each DG controller in both operation modes (grid‐connected and island mode). It also presents the challenges of having multiple DG units in a microgrid in terms of accurate power control/sharing, voltage and frequency regulation, power management between DGs, different renewable energy sources integration and deployment, seamless mode transfer, and the modeling issues. The centralized and decentralized control techniques as potential solutions have been discussed and compared by highlighting the advantages and disadvantages of each. Furthermore, the recent control techniques for drooped alternating current microgrids and the main proposed solutions and contributions in the literature have been exposed to finally overcome the droop control limitations and obtain a flexible and smart distributed power system. [ABSTRACT FROM AUTHOR]

Copyright of Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji is the property of Gazi University and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

This paper describes the effects of power device characteristics on the harmonics of the inverter output voltage and magnetic field leakage in a wireless power transfer system for electric vehicles with phase shift control and the suppression method of the haemonics. Even when the phase shift angle is theoretically set to minimize harmonics, the experimental results have confirmed the existence of the remaining harmonics, which have dead-time dependence. Harmonics with dead-time dependence include those caused by changes in the pulse width depending on the dead time, which have been conventionally compensated for by dead-time compensation. However, the targeted harmonics have a dead-time dependence even when the pulse widths are matched. Therefore, we focused on the difference between the dead-time period and other periods. Further, as the conduction resistance differs between these two periods, we performed a circuit analysis, also considering the conduction resistance. From the results, it was theoretically clarified that harmonics are generated because of the difference in resistance in the forward and reverse directions of power devices. Furthermore, the theoretically calculated dead time dependence of the device-induced harmonics was confirmed by experimental measurements of the harmonics of the inverter output voltage waveform and the magnetic field leakage. This confirms that one of the factors responsible for the harmonics is the difference in the device conduction resistance before and after the dead-time period. The main contributions of this paper are the revelation of unconventional dead-time-dependent harmonics and the proposal of a method for suppressing them.

The main contribution of this paper is to present a simple algorithm that theoretically and numerically assesses the switching angles of an inverter operated with the SPWM technique. This technique is the most widely used for eliminating harmonics in DC-AC converters for powering motors, renewable energy applications, household appliances, etc. Unlike conventional implementations of the SPWM technique based on the analog or digital comparison of a sinusoidal signal with a triangular signal, this paper mathematically performs this comparison. It proposes a simple solution to solve the transcendental equations arising from the mathematical analysis numerically. The technique is validated by calculating the total harmonic distortion (THD) of the generated signal theoretically and numerically, and the results indicate that the calculated angles produce the same distribution of harmonics calculated analytically and numerically. The algorithm is limited to single-phase inverters with unipolar SPWM.

With the rapid development of global energy transformation and new power system, ensuring the stability of distributed energy grid connections is the key to maintaining the reliable operation of the whole power system. This paper constructs detailed impedance models of grid-following (GFL) and grid-forming (GFM) inverters using a harmonic linearization method and thoroughly investigates the mechanisms of resonance when inverters are connected to the grid, as well as the impact of model parameters on the stability of the grid system. This paper also briefly analyzes the scenario where distributed energy and electric vehicles are integrated into the grid simultaneously, demonstrating that grid system stability can be ensured in complex grid situations through reasonable parameter design. Lastly, the accuracy of the proposed impedance models and analysis is verified through MATLAB/Simulink simulations.

The application of electrochemical cells as a source unit of electrical energy is rapidly growing—used in electric vehicles and other electric mobility devices, as well as in energy supply systems—as energy storage, often together with renewable energy sources. The key element of such systems is the power electronic converter used for DC energy storage and AC grid interfacing. It should be bidirectional to charge and discharge the battery when it is necessary. Two-stage battery interface converters are the most common; their DC-DC stage controls the battery current and adjusts voltage, but the DC-AC stage (inverter or frontend) controls the current in the grid. The use of unfolding inverters in two-stage battery interfaces can have some advantages. In this case, the DC-DC converter produces half-sinewave pulsating voltages and currents, but the unfolding circuit changes the polarity of the voltages and currents and produces no switching losses. Another trend of modern power electronics is the principle of partial power processing. In this case, power electronic converters deal only with a part of the total power; therefore, losses in such converters are reduced. This paper considers combining unfolding frontends with partial power DC-DC converters that enable the further reduction in losses. In this paper, it is shown that such implementation of the partial power conversion principle in semi-DC-AC systems is really possible based on the real-time matching of the voltage of the partial-power DC-DC converter, battery voltage (which depends on its state of charge) and the rectified instantaneous voltage of the AC grid.

Purpose – Traditional level inverter technology has drawbacks in the aspect of Total harmonic distortion (THD) and switching losses for higher frequencies. Due to these drawbacks, two-level inverters have become unprofitable for high-power applications. Multilevel inverters (MLIs) are used to enhance the output waveform characteristics (i.e. low THD) and to offer various inverter topologies and switching methods. Design/methodology/approach – MLIs are upgraded versions of two-level inverters that offer more output levels in current and voltage waveforms while lowering the dv/dt and di/dt ratios. This paper aims to review and compare the different topologies of MLI used in high-power applications. Single and multisource MLI's working principal and switching states for each topology are demonstrated and compared. A Simulink model system integrated using detailed circuit simulations in developed in MATLAB®–Simulink program. In this system, a constant voltage source connected to MLI to feed asynchronous motor with squirrel cage rotor type is used to demonstrate the efficacy of the MLI under different varying speed and torque conditions. Findings – MLI has presented better control and good range of system parameters than two-level inverter. It is suggested that the MLIs like cascade-five-level and NPC-five-level have shown low current harmonics of around 0.43% and 1.87%, respectively, compared to two-level inverter showing 5.82%. Originality/value – This study is the first of its kind comparing the different topologies of single and multisource MLIs. This study suggests that the MLIs are more suitable for high-power applications.

Abstract As the penetration of distributed generation (DG) systems in the grid is increasing, the challenge of combining large numbers of DGs in the power systems has to be carefully clarified and managed. The control strategy and management concept of the interconnected systems should be flexible and reliable to handle the various types of DGs. This can be suitably met by microgrids. This paper introduces the microgrid structure and elements and states the main objectives that should be achieved by the microgrid controllers and each DG controller in both operation modes (grid‐connected and island mode). It also presents the challenges of having multiple DG units in a microgrid in terms of accurate power control/sharing, voltage and frequency regulation, power management between DGs, different renewable energy sources integration and deployment, seamless mode transfer, and the modeling issues. The centralized and decentralized control techniques as potential solutions have been discussed and compared by highlighting the advantages and disadvantages of each. Furthermore, the recent control techniques for drooped alternating current microgrids and the main proposed solutions and contributions in the literature have been exposed to finally overcome the droop control limitations and obtain a flexible and smart distributed power system.

This paper Techno-economic design of a standalone solar PV system with case study, TY Danjuma conference building, Rivers State University (RSU) Port-Harcourt provides alternative electric power services to the building. The area or building under consideration uses the off-grid power generation model having identified the inadequacy and irregular power supply which causes man-hour loss during the working period. There is enough solar energy to generate emission-free power. In literature, it has been seen that researchers are advocating for the utilization of these abundant natural resources to generate power. The long-run operational benefits cannot be neglected. To achieve the aim and objectives of this research, an analytical (components-wise) method was adopted. The various components required to provide green energy services were thoroughly and chronologically computed. The analysis provides specifications for the components as mentioned in the materials section and concerning the load demanded. Without a thorough load audit, the required solar PV and its delivery gadgetry would not be adequate. Hence, load survey, assumption and design calculations, etc., to achieve the 42kWp with 140 numbers of panels; 48 numbers of 200Ah, 12V deep cycle batteries, 25kVA inverter (or with two sets of inverters, 15kVA and 10kVA, 48Vdc/220Vac), 6 numbers of 150Amp, 48V solar charge controllers or a single 900Amp,48V solar charge controller was evaluated. The specification evaluated and presented was based on the load computed and the prevailing market for available components. From the techno-economic viewpoint of using solar-powered systems or diesel-powered generators, it was obvious that the solar-powered system has many more advantages in terms of daily, monthly or yearly running and maintenance costs as comparable to diesel-generator systems. Thus, it will be interesting to note that adequate utilization of renewable energy for electricity generation will be the best practice in the socioeconomic development of a state or a nation.

This paper presents a single-phase Full-Bridge (FB) inverter with a hybrid commutation technique designed to reduce the harmonic distortion caused by the loss of the controller capability around the zero-crossing point in the unipolar commutation region. The hybrid modulation changes from unipolar to bipolar commutation under the loss of the reference control, improving the robustness and efficiency of the method. The commutation technique improves the switching performance and reduces the switching losses. Simulation models are developed in MATLAB/Simulink R2023b to evaluate their performance under different operating conditions. The results show that the proposed commutation technique can achieve high efficiency, low total harmonic distortion (THD), and fast dynamic response. The experimental implementation of sliding mode control (SMC) implemented in an STM32 microcontroller confirms that the hybrid commutation technique can reduce the THD by 0.96 percentage points for local (off-grid) loads and up to 2.45 in an industrial grid-tie network, compared with unipolar commutation. These findings highlight the potential of the proposed modulation technique for applications like solar panels and offer crucial insights for ongoing research and development in this field.