Search

The solar cell is key photovoltaic (PV) device that converts light energy into electricity, and its surface defects are the main reason for the decrease in the efficiency of PV systems. Conventional solar cell defect detection methods are often interfered with by cell substrates and are difficult to detect under high reflection, especially the overlap of substrates and defects. A solar cell defect detection method based on Fourier single-pixel imaging (FSI) is proposed to distinguish periodic substrates and defects in reconstruction by projecting illumination patterns with Fourier fringes, in which the removal of substrates reaches 100%. Meanwhile, for the high reflection present on the solar cell surface, the solar cell is directly treated as a single-pixel detector, which is free from interference from ambient light. The experiment adopts the solar cell itself as an imaging device under highly reflective conditions and removes the interference of the cell substrate by a 4-step phase-shifted FSI reconstruction algorithm to achieve the extraction of four types of defects, each of which is located in a different position of the solar cell substrate, at 10%, 50%, and 100% sampling rates. The method described here complements existing solar cell defect detection approaches and may be applied to enhance photovoltaic testers that rely on real-time correlation measurements, with promising applications in chip inspection and medical cell imaging. • Fourier single-pixel imaging(FSI) method for solar cells defect detection. • By using the solar cell as a photodetector(PD) to avoid the interference of high reflections. • Periodic substrate removal by 4-step phase-shift-based FSI reaches 100% in four different types of defects. [ABSTRACT FROM AUTHOR]

Nickel ferrite owns a lot of advantages as electrode materials for supercapacitor, such as high energy density and excellent theoretical capacity. Whereas, the electrochemical performances of NiFe 2 O 4 in terms of rate performance and cycle stability are not satisfactory due to the low conductivity. While carbon fiber is a kind of material with high conductivity. Hence, NiFe 2 O 4 @ slit modified hollow carbon fiber is obtained through the coaxial electrospinning method. The slits on hollow carbon fibers are beneficial to the contact of inner NiFe 2 O 4 nanoparticles with electrolyte. Results of electrochemical tests show that at a current density of 1 A/g, the specific capacitance of NiFe 2 O 4 @ slit modified hollow carbon fiber is calculated to be 225.4 F/g, higher than that of NiFe 2 O 4 nanoparticles of 134.8 F/g. Moreover, a better cycle and rate performances (100 % vs 80 %; 71.9 % vs 47.5 %) are achieved. This work displays that slit modified hollow carbon fiber can improve the electrochemical performance of NiFe 2 O 4 efficiently. [Display omitted] • Carbon fibers are introduced to enhance the rate and cycle performances of NiFe 2 O 4. • Slits are obtained utilizing Al 2 O 3 sacrificial hard templates. • Slits are beneficial to the contact of NiFe 2 O 4 and electrolyte. [ABSTRACT FROM AUTHOR]

In this study, Zn 8 B 3 H 3 O 14 nanosheets were synthesized through a one-step coprecipitation process and employed as both a boron source and substrate templates for the fabrication of boron nitride nanosheets (BNNSs), which were synthesized efficiently at low temperatures by the borate nitration method using ammonia as the nitrogen source. The thickness of the synthesized BNNSs ranged from 3 to 10 nm with a flake dimension of about 2.56 μm. The prepared BNNSs using this method realized 98.8% boron source utilization and single batch yields up to gram level. In addition, BNNSs/SiO 2 microwave-transparent composites were prepared to investigate the potential for large-scale applications of the BNNSs produced by using this method. The composites demonstrated a remarkable increase in bending strength and fracture toughness, reaching 122.02 MPa and 2.31 MPa·m1/2, respectively, with the addition of only 0.5 wt% BNNSs. Compared with SiO 2 without BNNSs, the fracture toughness of the composites is increased by 106%. A novel crack plugging strong toughening mechanism of BNNSs is proposed. Simultaneously, the composites exhibit exceptional microwave-transparent properties, with dielectric constants below 4 in the real part and below 0.03 in the imaginary part. Therefore, this study has successfully achieved the low-temperature and efficient synthesis of micron-scale BNNSs, laying the groundwork for their large-scale application. [Display omitted] • Zn 8 B 3 H 3 O 14 nanosheets were used as substrate templates for the synthesis of BNNSs. • BNNSs were synthesized with high efficiency at low temperatures (900 °C). • The single batch yield of BNNSs reached up to the gram level. • The BNNSs/SiO 2 wave-transparent composites with ultrahigh toughness were obtained. • A novel mechanism for strengthening and toughening (BNNSs plugging) is proposed. [ABSTRACT FROM AUTHOR]