Search

Transforming carbon dioxide (CO2) into valuable chemical products or carbonaceous fuels is a crucial strategy for addressing the impact of global climate change and energy challenges. Electrochemical CO2 reduction reaction (eCO2RR) shows promise in this regard, but challenges remain in the eCO2RR, such as poor electrocatalytic activity and low selectivity of the target product. In this study, we report a one‐step method of replacement reaction for synthesizing a cadmium layer on the zinc foil surface (named as the Cd/Zn electrode) for efficient eCO2RR to CO. The thicknesses of Cd layers could be easily adjusted by varying the molar concentration of Cd2+. The Cd/Zn electrode with an approximately 2.0 μm thick Cd layer exhibited superior electrocatalytic performance of the eCO2RR to CO in the ionic liquid‐containing electrolytes. The highest Faradaic efficiency of CO reached up to 99.0 % at −1.9 V vs. Ag/Ag+, and the maximum CO partial current density achieved 34.8 mA cm−2 at −2.3 V vs. Ag/Ag+. The 3D fluffy Cd layer with a suitable thickness on the Zn foil surface provided abundant active sites, fast charge transfer rate, and strong adsorption ability of CO2⋅− intermediates, which contributed to the enhancement of the electrocatalytic performance of the eCO2RR to CO. [ABSTRACT FROM AUTHOR]

Electrochemical CO2 reduction (ECR) to valuable chemicals and fuels using renewable energy is a promising way to reduce carbon emission. Herein, Sn-based films were electrodeposited on Ag foil surfaces (Sn/Ag-y) for selective ECR to CO, where y represented the concentration of SnCl2 in the electrodeposition bath. The Sn/Ag-20 electrode achieved a high CO faradaic efficiency of 96.0% with a current density of 69.3 mA cm−2. The enhanced catalytic performance could be attributed to appropriate superficial properties, large electrochemical active surface areas, low charge transfer resistance, efficient stabilization capacity of the CO2˙− intermediates, and suitable combination with electrolytes. [ABSTRACT FROM AUTHOR]

Photocatalytic oxygen reductive H2O2 production is a promising approach to alternative industrial anthraquinone processes while suffering from the requirement of pure O2 feedstock for practical application. Herein, we report a spaced double hydrogen bond (IC−H‐bond) through multi‐component Radziszewski reaction in an imidazole poly‐ionic‐liquid composite (SI‐PIL‐TiO2) and levofloxacin hydrochloride (LEV) electron donor for highly efficient and selective photocatalytic air reductive H2O2 production. It is found that the IC−H‐bond formed by spaced imino (−NH−) group of SI‐PIL‐TiO2 and carbonyl (−C=O) group of LEV can switch the imidazole active sites characteristic from a covered state to a fully exposed one to shield the strong adsorption of electron donor and N2 in the air, and propel an intenser positive potential and more efficient orbitals binding patterns of SI‐PIL‐TiO2 surface to establish competitive active sites for selectivity O2 chemisorption. Moreover, the high electron enrichment of imidazole as an active site for the 2e− oxygen reduction ensures the rapid reduction of O2. Therefore, the IC−H‐bond enables a total O2 utilization and conversion efficiency of 94.8 % from direct photocatalytic air reduction, achieving a H2O2 production rate of 1518 μmol/g/h that is 16 and 23 times compared to poly‐ionic‐liquid composite without spaced imino groups (PIL‐TiO2) and TiO2, respectively. [ABSTRACT FROM AUTHOR]

With the increasingly strict limitations on emission standards of vehicles, deep desulfurization in fuel is indispensable for social development worldwide. In this study, a series of hybrid materials based on SiO2-supported polyoxometalate ionic liquid were successfully prepared via a facile ball milling method and employed as catalysts in the aerobic oxidative desulfurization process. The composition and structure of prepared samples were studied by various techniques, including FT-IR, UV-vis DRS, wide-angle XRD, BET, XPS, and SEM images. The experimental results indicated that the synthesized polyoxometalate ionic liquids were successfully loaded on SiO2 with a highly uniform dispersion. The prepared catalyst (C16PMoV/10SiO2) exhibited good desulfurization activity on different sulfur compounds. Moreover, the oxidation product and active species in the ODS process were respectively investigated via GC-MS and ESR analysis, indicating that the catalyst can activate oxygen to superoxide radicals during the reaction to convert DBT to its corresponding sulfone in the fuel. [ABSTRACT FROM AUTHOR]

Background: Mechanical damage to plants triggers local and systemic electrical signals that are eventually decoded into plant defense responses. These responses are constantly affected by other environmental stimuli in nature, for instance, light fluctuation. In recent years, studies on decoding plant electrical signals powered by various machine learning models are increasing in a sense of early prediction or detection of different environmental stresses that threaten plant growth or crop yields. However, the main bottleneck is the low-throughput nature of plant electrical signals, making it challenging to obtain a substantial amount of training data. Consequently, training these models with small datasets often leads to unsatisfactory performance. Results: In the present work, we set out to decode wound-induced electrical signals (also termed slow wave potentials, SWPs) from plants that are deprived of light to different extents. Using non-invasive electrophysiology, we separately collected sets of local and distal SWPs from the treated plants. Then, we proposed a workflow based on few-shot learning to automatically identify SWPs. This workflow incorporates data preprocessing, feature extraction, data augmentation and classifier training. We established the integral and the first-order derivative as features for efficiently classifying SWPs. We then proposed an Adversarial Autoencoder (AAE) structure to augment the SWP samples. Combining them, the Random Forest classifier allowed remarkable classification accuracies of 0.99 for both local and systemic SWPs. In addition, in comparison to two other reported methods, our proposed AAE structure enabled better classification results using our tested features and classifiers. Conclusions: The results of this study establish new features for efficiently classifying wound-induced electrical signals, which allow for distinguishing dark-affected local and systemic plant wound responses. We also propose a new data augmentation structure to generate virtual plant electrical signals. The methods proposed in this study could be further applied to build models for crop plants using electrical signals as inputs, and also to process other small-scale signals. [ABSTRACT FROM AUTHOR]

The electrocatalytic CO2 reduction (ECR) to produce valuable fuel is a promising process for addressing atmospheric CO2 emissions and energy shortages. In this study, Cl‐anion doped cadmium sulfide structures were directly fabricated on a nickel foam surface (Cl/CdS‐NF) using an in situ hydrothermal method. The Cl‐anion doping could significantly improve ECR activity for CO production in ionic liquid and acetonitrile mixed solution, compared to pristine CdS. The highest Faradaic efficiency of CO is 98.1 % on a Cl/CdS‐NF‐2 cathode with an excellent current density of 137.0 mA cm−2 at −2.25 V versus ferrocene/ferrocenium (Fc/Fc+, all potentials are versus Fc/Fc+ in this study). In particular, CO Faradaic efficiencies remained above 80 % in a wide potential range of −2.05 V to −2.45 V and a maximum partial current density (192.6 mA cm−2) was achieved at −2.35 V. The Cl/CdS‐NF‐2, with appropriate Cl anions, displayed abundant active sites and a suitable electronic structure, resulting in outstanding ECR activity. Density functional theory calculations further demonstrated that Cl/CdS is beneficial for increasing the adsorption capacities of *COOH and *H, which can enhance the activity of the ECR toward CO and suppress the hydrogen evolution reaction. [ABSTRACT FROM AUTHOR]

Single-atom catalysts (SACs) have attracted great attention for various chemical reactions because of their strong activity, high metal utilization ratio, and low cost. Here, by using the density functional theory (DFT) method, the stability of a single VIII-group metal atom (M = Ni, Pd, Pt) anchored on the defective hexagonal boron nitride (h-BN) sheet and its possible application in oxidative desulfurization (ODS) are investigated. Calculations show that the stability of the single M atom embedded in the h-BN surface with B and N vacancies is strikingly enhanced compared to that on the perfect h-BN surface. The catalytic activities of the defective h-BN-supported single metal atom are further studied by the activation of molecular oxygen and subsequent oxidation of dibenzothiophene (DBT). O2 is activated to the super-oxo state with large interaction energies on three M/VN surfaces. However, among the three M/VB surfaces, only Pt/VB performs efficient activation of O2. The oxidation of DBT proceeds in two steps; the rate-determining step is the initial step, in which activated O2 oxidizes DBT to produce sulfoxide. By comparing the energy barrier in the first reaction step, both Ni/VN and Pt/VB are revealed as promising candidates for the ODS reaction. [ABSTRACT FROM AUTHOR]

Electrocatalytic conversion of biomass‐derived 5‐hydroxymethylfurfural (HMF) to value‐added 2,5‐furandicarboxylic acid (FDCA) is of great significance in compensating for the rapid consumption of fossil resources. However, it is a challenge to further improve the performance of HMF electrocatalytic oxidation (HMFOR) by synergistic kinetics (active sites) and thermodynamics (adsorption sites). In this work, Al(OH)3/Co(OH)2 is successfully fabricated as an efficient catalyst, and its catalytic mechanism for HMF oxidation is clarified. Extended X‐ray absorption fine structure (EXAFS) analysis demonstrate that electrochemically generated Co3+ is the main catalytic site for HMF oxidation. The HMF equilibrium adsorption capacity of Al(OH)3 reach 57.0 mg g−1, which effectively increase the initial concentration of substrate and promoted the reaction rate. The combined results, based on 24 stable cycles and an FDCA yield retention rate of 98.6% after 180 days, are the highest ever achieved. Additionally, it is shown that this system can oxidize four other biomass‐derived substrates. Therefore, this work provides insight into a hydroxide catalyst that owes its efficiency to synergy between active and adsorption sites. [ABSTRACT FROM AUTHOR]

Electrochemical CO 2 reduction (ECR) to valuable chemicals and fuels using renewable energy is a promising way to reduce carbon emission. Herein, Sn-based films were electrodeposited on Ag foil surfaces (Sn/Ag- y ) for selective ECR to CO, where y represented the concentration of SnCl 2 in the electrodeposition bath. The Sn/Ag-20 electrode achieved a high CO faradaic efficiency of 96.0% with a current density of 69.3 mA cm -2 . The enhanced catalytic performance could be attributed to appropriate superficial properties, large electrochemical active surface areas, low charge transfer resistance, efficient stabilization capacity of the CO 2 ˙ - intermediates, and suitable combination with electrolytes.

Amyloidosis is a rare disease. This paper reports a case of localized secondary hypopharyngeal amyloidosis presenting with pulmonary tuberculosis as the initial symptom. The patient lacked specific clinical manifestations and primarily exhibited symptoms such as cough, sputum production, acid reflux, belching, and abdominal pain. Chest CT indicated bronchiectasis with infection and pulmonary tuberculosis. Digestive endoscopy revealed a white mucosal elevation at the right pyriform sinus of the hypopharynx. Pathological diagnosis confirmed amyloid deposits in the hypopharyngeal mucosal tissue. The patient tested positive for anti-amyloid A antibodies, Congo red staining (+), and periodate Schiff staining (+). Amyloidosis commonly affects the digestive system and may have various etiologies, often presenting with symptoms that overlap with other digestive system diseases, leading to frequent misdiagnosis and missed optimal treatment opportunities. The hypopharynx, a highly folded and narrow chamber that serves as a common passage for the digestive and respiratory tracts, can be effectively evaluated for amyloidosis using digestive endoscopy.

The unique properties of direct bandgap semiconductors make it important to search for semiconductors exhibiting this phenomenon in perovskite materials. In this study, we employed first-principles calculations to investigate the crystal structures, magnetic configurations, and electronic properties of hexagonal perovskite BaMnO 3 in its 4H and 6H phases. The results indicate that both structures exhibit antiferromagnetic characteristics, in which the Mn-O-Mn superexchange plays the dominant role in the 4H phase, although there is a competition between the Mn-Mn direct exchange interaction and the Mn-O-Mn superexchange interaction. In contrast, these two interactions exhibit harmonious coexistence in the 6H phase, and the two antiferromagnetic transitions occurring in the experimental phase should be related to the synergistic effect between them. Despite their different internal arrangements, they exhibit the same charge combination of Ba 2+ Mn 4+ O 2- 3 . More importantly, both phases exhibit semiconductor properties with a direct bandgap, making it suitable to serve as an alternative material for photovoltaic and optoelectronic devices. In particular, the band gap of the 4H phase is just the right size to absorb visible light, and the 6H phase should be a potential candidate to absorb light in the ultraviolet region.

Photocatalytic oxygen reductive H 2 O 2 production is a promising approach to alternative industrial anthraquinone processes while suffering from the requirement of pure O 2 feedstock for practical application. Herein, we report a spaced double hydrogen bond (IC-H-bond) through multi-component Radziszewski reaction in an imidazole poly-ionic-liquid composite (SI-PIL-TiO 2 ) and levofloxacin hydrochloride (LEV) electron donor for highly efficient and selective photocatalytic air reductive H 2 O 2 production. It is found that the IC-H-bond formed by spaced imino (-NH-) group of SI-PIL-TiO 2 and carbonyl (-C=O) group of LEV can switch the imidazole active sites characteristic from a covered state to a fully exposed one to shield the strong adsorption of electron donor and N 2 in the air, and propel an intenser positive potential and more efficient orbitals binding patterns of SI-PIL-TiO 2 surface to establish competitive active sites for selectivity O 2 chemisorption. Moreover, the high electron enrichment of imidazole as an active site for the 2e - oxygen reduction ensures the rapid reduction of O 2 . Therefore, the IC-H-bond enables a total O 2 utilization and conversion efficiency of 94.8 % from direct photocatalytic air reduction, achieving a H 2 O 2 production rate of 1518 μmol/g/h that is 16 and 23 times compared to poly-ionic-liquid composite without spaced imino groups (PIL-TiO 2 ) and TiO 2 , respectively., (© 2024 Wiley‐VCH GmbH.)

Significant advances in chemotherapy drugs have reduced mortality in patients with malignant tumors. However, chemotherapy-related cardiotoxicity increases the morbidity and mortality of patients, and has become the second leading cause of death after tumor recurrence, which has received more and more attention in recent years. Arrhythmia is one of the common types of chemotherapy-induced cardiotoxicity, and has become a new risk related to chemotherapy treatment, which seriously affects the therapeutic outcome in patients. Traditional Chinese medicine has experienced thousands of years of clinical practice in China, and has accumulated a wealth of medical theories and treatment formulas, which has unique advantages in the prevention and treatment of malignant diseases. Traditional Chinese medicine may reduce the arrhythmic toxicity caused by chemotherapy without affecting the anti-cancer effect. This paper mainly discussed the types and pathogenesis of secondary chemotherapeutic drug-induced arrhythmia (CDIA), and summarized the studies on Chinese medicine compounds, Chinese medicine Combination Formula and Chinese medicine injection that may be beneficial in intervention with secondary CDIA including atrial fibrillation, ventricular arrhythmia and sinus bradycardia, in order to provide reference for clinical prevention and treatment of chemotherapy-induced arrhythmias., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2024 Li, Cheng, Zhu, Hu, Wang, Niu, Li, Aierken, Li, Feng and Liu.)

The electrocatalytic CO 2 reduction (ECR) to produce valuable fuel is a promising process for addressing atmospheric CO 2 emissions and energy shortages. In this study, Cl-anion doped cadmium sulfide structures were directly fabricated on a nickel foam surface (Cl/CdS-NF) using an in situ hydrothermal method. The Cl-anion doping could significantly improve ECR activity for CO production in ionic liquid and acetonitrile mixed solution, compared to pristine CdS. The highest Faradaic efficiency of CO is 98.1 % on a Cl/CdS-NF-2 cathode with an excellent current density of 137.0 mA cm -2 at -2.25 V versus ferrocene/ferrocenium (Fc/Fc + , all potentials are versus Fc/Fc + in this study). In particular, CO Faradaic efficiencies remained above 80 % in a wide potential range of -2.05 V to -2.45 V and a maximum partial current density (192.6 mA cm -2 ) was achieved at -2.35 V. The Cl/CdS-NF-2, with appropriate Cl anions, displayed abundant active sites and a suitable electronic structure, resulting in outstanding ECR activity. Density functional theory calculations further demonstrated that Cl/CdS is beneficial for increasing the adsorption capacities of *COOH and *H, which can enhance the activity of the ECR toward CO and suppress the hydrogen evolution reaction., (© 2024 Wiley-VCH GmbH.)