Search

In this work, the fabrication of Rochelle salt based piezoelectric structures is illustrated. Structures composed of paper and Rochelle salt are easily manufactured using simple processes. Both manufacturing and the material itself are environmental friendly. Additionally Rochelle salt is biocompatible. In the paradigm of a cleaner piezoelectric technology, the fabrication of active sensing or actuating devices is developed. Thus processing method, material and piezoelectric properties have been studied: (1) pure crystals are used as acoustic actuator, (2) properties of paper impregnated with Rochelle salt are detailed, (3) charge generation is demonstrated on the impregnated material. Actuating and sensing devices are reported in order to highlight the potential of this green piezoelectric material. [ABSTRACT FROM AUTHOR]

Abstract: This paper investigates the electro-mechanical behaviour of a thick, laminated actuator with piezoelectric and isotropic lamina under externally applied electric loading using a new two-dimensional computational model. The elastic core is relatively thick and thus it is modelled by Timoshenko thick-beam theory. Although the piezoelectric lamina is a beam-like layer, it is formulated via a two-dimensional model because of not only the strong electro-mechanical coupling, but also of the presence of a two-dimensional electric field. It is shown in this paper that a one-dimensional model for the piezoelectric beam-like layer is inadequate. The piezoelectric model is constructed within the scope of linear piezoelectricity. The actuation response is induced through the application of external electric voltage. Under the strong coupling of elasticity and electricity, the strain energy and work of electric potential are presented. The electro-mechanical response of the laminated Timoshenko beam is formulated and determined via a variational energy principle. Numerical examples presented illustrate convincing comparison with finite element solutions and existing published data. New numerical solutions are also presented to investigate the geometric effect on the electro-mechanical bending behaviour. [Copyright &y& Elsevier]

This paper reports on the development of a unique Digital Loudspeaker Array solution, based on Pb(Zr 0.52 ,Ti 0.48 )O 3 (PZT) thin-film actuated membranes, arranged in a matrix and which operate in a binary manner by emitting short pulses of sound pressure. Using the principle of additivity of pressures in the air, it is possible to reconstruct audible sounds. For the first time, electromechanical and acoustic characterizations were reported on 256 MEMS membranes DLA. Sounds audible as far as several meters from the loudspeaker have been generated using low-voltage. [ABSTRACT FROM AUTHOR]

Abstract: Many applications involve actuated devices made of shape memory alloys, but the lack of efficient numerical tools hinders the development of such technologies. Software using a finite element method like ANSYS allows the user to predict complex responses of a system without extensive programming. In this paper, a homemade phenomenological 1D bilinear model is programmed through the USERMAT procedure in ANSYS. The model allows the representation of both mechanical and thermal hystereses. The martensitic transformation is controlled by transformation criteria similar to those used in conventional plasticity, and subcycles are modeled by a simple elastic return through the hysteresis. The model is validated through isothermal tensile testing, assisted two-way shape memory testing and stress generation testing, and a good agreement with experimental results is shown. Finally, thermomechanical response of a single-degree-of-freedom actuator is simulated as a typical application and a case study involving the shape change of a radio controlled aircraft wing shows the potential of the numerical simulations. [Copyright &y& Elsevier]

This paper discusses research carried-out by ALSTOM POWER on the development and validation (on laboratory scale plant) of an observer-based fault detection identification and accommodation (FDIA) system for an electromechanical actuator. Three separate linear observers (or Kalman filters) are used to detect and identify faults corresponding to the system''s three sensors. Having successfully detected a sensor fault, a reconstructed measure of that output signal (generated from an observer not associated with that sensor) is used to replace the measured signal for feedback control. This ensures that the system can continue to function effectively even after a sensor failure. The experimental results demonstrate that this approach could significantly enhance the post-fault availability of such systems. [Copyright &y& Elsevier]