Search

Two economic activities have been integrated in southern Brazil: olive cultivation and sheep farming. The favorable edaphoclimatic conditions in the southern region for cultivating olive trees and cultural preferences for the consumption of sheep meat make this integration a valuable strategy. Considering that every activity causes environmental impact and the exploitation of natural resources, new systems that promote sustainable development and the efficient use of these resources become necessary. This paper presents the first study of the carbon footprint of the life cycle of integrating of sheep and olive farming, with the objective to build an inventory based on primary data collected on olive and sheep farms in Brazil, determine the carbon footprint of the conventional and integrated system and estimate the potential for mitigating GHG emissions. The evaluation was performed using the life cycle assessment (LCA) methodology. The study focuses on the detailed analysis of the processes and activities that are responsible for GHG emissions, including enteric methane emissions, methane emissions from manure management, emissions from nitrogen fertilizer use and limestone application and energy consumption. For this, two major scenarios were considered, the first centered around on the traditional olive cultivation and sheep farming systems individually, and the second involved their synergistic integration. The findings indicate that the conventional system is associated with a global warming impact of 6.8 kg CO 2 eq per liter olive oil and kg live weight. In contrast, the integrated system demonstrates a significant mitigation potential of 27.7%, resulting in a reduced global warming impact of 4.92 kg CO 2 eq. This advantage is a consequence of the synergy between the systems, as they now occupy the same area, which allows the sharing of agricultural activities and agrochemical inputs, in addition to optimizing nutrient recycling and complementing each other. Additionally, the results of a sensitivity analysis showed that enteric methane from sheep and the application of limestone to the soil are the most influential parameters on the carbon footprint, indicating that they are key parameters for the development of GHG mitigation strategies, some of which were discussed in the article. • First life cycle assessment of integration between olive and sheep farming in Brazil. • The inventory was constructed with primary data collected in situ. • The study assesses the carbon footprint of the olive and sheep farming system. • The results show environmental advantages of the integration of olive and sheep farming systems. [ABSTRACT FROM AUTHOR]

Abstract This paper is a multi-case study of three oil and gas projects in Brazil that investigates the tacit knowledge on how to best manage energy use during the construction phase. Twenty-two in-depth interviews form the primary evidence of the case studies. The methodology incorporates network analysis of concepts that influence energy use to formalize the case studies and collect additional knowledge. The framework comprises thirteen construction activities and twenty-one systems and factors related to design, resources and site characteristics, specific to the construction domain. This set of concepts can influence the energy consumption during the construction phase. Although these concepts are present in nearly every project, their dynamics and their inter-relations with project-specific systems change, depending on the context of the project. The proposed method, which employs network analysis, help identify their interrelationships and relative importance of these concepts. In addition to the opportunities and lessons learned that can guide future energy assessments and improve energy use in construction projects, the results show how promising network analytics is to obtain knowledge usually difficult to perceive in traditional knowledge processes. Besides, this work highlights the importance of supporting collaboration between project team members to study and decide on the plans to manage/reduce energy consumption during the construction phase in oil and gas facilities. While the energy savings are smaller than the upstream and operation phases, it has received much less attention. It is also a phase with much more subjective and contextualized knowledge – making the use of case-based analyses more suitable. Highlights • Supports collaboration in studying and planning energy use during the construction phase of O&G projects. • Three case studies are conducted supported by in-depth interviews. • Network analysis is used to represent construction activities, factors and systems. • The approach represents a meaningful way to formalize the knowledge in the cases. • Can help formalize the knowledge contained in a text case. [ABSTRACT FROM AUTHOR]

This paper focuses on an analysis of the energy mix profile and energy efficiency of the Brazilian dairy industry. It investigates dairies’ energy mix and energy efficiency and identifies some actions for a cleaner energy mix. Primary data from 37 dairy cheese-making establishments distributed among the Brazilian regions were obtained from online surveys. The results indicate that woodfuel plays a critical role, being the most used fuel in thermal energy generation, while diesel is dominant in electric generation. It also emphasizes that only 51% of the dairy establishments utilize electric energy generators. Other alternative biomass sources are still incipient in the sector, restricted to just 9.5% of the cases for thermal energy generation and no cases for electricity. Regarding the energy efficiency analysis, the results suggest dairies are more scale efficient than pure technical efficient. However, the dairies present a low energy efficiency level. There is no evidence that inefficiencies are differently distributed according to their size. These findings are important for government agencies, industry associations, scientists, universities and research institutes. High inefficiencies, regarding the use of electricity and thermal energy, are a key issue in sustainable bioenergy production. [ABSTRACT FROM AUTHOR]

Recognizing the need to increase energy efficiency across various sectors of the economy, the Brazilian government through the national energy efficiency plan (adopted in 2011) seeks to avoid 30 million tons of CO2 emissions through a reduction in electricity consumption of about 10% by 2030. Notwithstanding, we believe that a complete realization of such initiative will be dependent on the level of substitutability between different production factors and fuel types. Using the translog production function method, this paper, first provides insight on the economic impact of both factor and fuel inputs in Brazil. Most importantly, we examine the possibility of substitution among capital, labor, petroleum, and electricity. The ridge regression technique was used to estimate the parameters after our data depicted the existence of multicollinearity. Our results show that capital and labor are positively linked to output; however, petroleum and electricity contribute negatively to economic output in Brazil of which corruption is a plausible reason. Again, all variable inputs are substitutes with their relative technological progress depicting features of convergence. This implies that Brazil can achieve a cleaner energy system without much challenges due to the possibility of switching from greenhouse gas (GHG) emitting petroleum to a cleaner energy electricity. Our findings also highlight the importance of policies that advance merger of enterprises, and renewable energy use. [ABSTRACT FROM AUTHOR]

An emergent strategy to target sustainability involves an understanding of the water-energy interconnections. It takes water to produce energy, and it takes energy to source, treat, and distribute water. Sanitation and energy distribution are the world's pre-eminent development challenges. They are a magnifier of poverty, ill-health and mortality, and gender inequality. The word 'nexus' means the understanding of these interdependencies, tensions, and trade-offs. This paper investigates water-energy interconnections through critical analysis. We applied a bottom-up approach to describe Sao Paulo state's river basins, in Southeast Brazil, from the household to the regional scale. Initially, water availability, energy consumption and wastewater treatment data are inferred using per capita data. The subsequent data analysis then considered the positive and negative linkages among the basins. Local and state levels of dependency are also assessed, considering environmental and socioeconomic impacts. The significance of this paper lies in understanding these interconnections and their interdependence within the local context and individuals' behaviour. The results allow a comprehensive analysis of the water-energy Nexus across Sao Paulo state. The critical analysis also shows how the primary drivers contribute to urbanisation levels, population growth, and industrial activities. • Regional WE Nexus analysis is undertaken for the most industrialised state of Brazil. • The increase in wastewater treatment highlights the sustainability path. • Wastewater treatment growth rates are higher than population and GDP rates. • It develops a unique database for future studies using the Nexus approach. • Population growth, GDP, and industrial intensity are the main drivers in the WE Nexus. [ABSTRACT FROM AUTHOR]

This paper explores the environmental impacts of a refrigerator recycling system in Brazil and quantifies its ecological advantages over primary resource production through a Life Cycle Assessment based on ISO 14040. The Life Cycle Assessment (LCA) accounts for savings of 720 kg CO 2 -eq per recycled refrigerator on average, thus demonstrating that an environmentally sound recycling process holds substantial emission reduction potential. In addition, the application of the recycling process in conjunction with collection and reverse logistics of refrigerators in a recycling system can reduce energy demand in Brazil by an average of 1.5 GJ per recycled unit. As a result, refrigerator recycling systems qualify as a valid and scalable energy efficiency measure in accordance with the Brazilian national framework for the evaluation of energy efficiency projects (PROPEE). The energy economics for projects based on recycling systems are shown for the 30 largest energy distributors in Brazil. Available budgets, calculated with diagnostics undertaken in conformity with the International Performance Measurement and Verification Protocol (IPMVP) for a threshold value (cost-benefit ratio = 0.8), clearly indicate the viability and competitiveness of these recycling systems as project opportunities for energy conservation under the national energy regulation agency ANEEL's energy efficiency program (PEE). [ABSTRACT FROM AUTHOR]

• A top-down analysis of the non-residential building stock in Brazil is proposed. • The share of each building typology in the country energy consumption was assessed. • A statistical analysis showed variation of EUI according to type of building and region. • Reference values for the commercial building stock in Brazil is provided. This paper provides a pioneering, top-down analysis of the non-residential building stock in Brazil. A country-wide dataset was used, comprising 10,000 buildings divided into 12 typologies. Key indicators include floor area, energy use intensity, and operation patterns. In addition, predominant wall constructions, lighting systems, equipment, water heating, and HVAC systems for each typology were identified, including average density power for the systems. Data from the Brazilian Energy Balance report was correlated with the sample of buildings to determine the proportion of each building typology in the total energy consumption of the country, considering different energy sources. This study provides an innovative and up-to-date status of the characteristics of non-residential buildings in Brazil. A complementary statistical analysis addressed the correlation between energy use intensity and the building characteristics including an ANOVA test and a regression analysis in order to investigate the influence of the energy usage indicators (Lighting Power Density, Equipment Power Density, Cooling capacity) on the energy use intensity of each building typology in Brazil. This study is intended to serve as a reference for building characteristics and building energy performance in Brazil, and hence support diverse research regarding country-level building stock modeling, energy benchmarking, climate change impacts, and energy-efficiency related studies. [ABSTRACT FROM AUTHOR]

Abstract: This paper reports the use of an internationally recognized validation and diagnostics procedure to test the fidelity of a simplified calculation method. The case study is the simplified model for calculation of energy performance of building envelopes, introduced by the Brazilian regulation for energy efficiency in commercial buildings. The first step of the assessment consisted on evaluating the simplified model results using the BESTEST. This paper presents a straightforward approach to apply the BESTEST in other climates than the original one (Denver, USA). The second step of the assessment consisted on applying the simplified model to evaluate four building typologies, and compare the results with those obtained using a state of the art building energy simulation (BES) program. For some BESTEST cases, the simplified model presented results inside of a confidence interval calculated by the authors. However, the simplified model was found to yield significant difference in the four building typologies analysed. Moreover, in all four building typologies analysed, the simplified model led to a lower energy efficiency label when compared to the label obtained using BES. The paper concludes that the simplified model may require improvements to properly indicate the actual energy performance of commercial building envelopes. [Copyright &y& Elsevier]

This paper estimates the Genuine Progress Indicator (GPI) for Brazil from 1970 to 2010 as an alternative indicator to the Gross Domestic Product (GDP). After a growing disparity between these two indicators in the 1980s, when Brazil's per capita GPI featured a 35% decline, there was a relative catch-up in per capita GPI, but not one sufficiently strong enough to reduce the historical GPI–GDP gap. The recent trend of rapidly increasing environmental and social costs, along with the decline in unpaid labour and infrastructure services, poses concerns about the sustainability of an increasing GPI for Brazil into the future. Policies aimed at reducing environmental costs are necessary if Brazil is to enjoy a sustainable pattern of non-declining economic welfare. Brazil must pursue a higher rate of productivity in material and energy consumption in order to keep environmental pressures to a minimum level. [ABSTRACT FROM AUTHOR]

• An overall panorama of the school buildings in Brazil was presented. • Energy billed data and survey evidence were used to build a statistical stock model. • The Weibull distribution was the most adequate to represent the continuous variables. • kWh/student·year was more suitable than kWh/m2·year to model Brazilian school buildings stock. • Thermal performance is an issue to be greatly improved in schools in Brazil. Understanding the actual conditions in school buildings regarding energy usage and environmental satisfaction gives way to the development of consistent building stock modelling. In the Brazilian context, a deep-rooted inefficient structure of energy management implies a lack of mapping the actual conditions of the public schools. Therefore, this paper aimed to assess the actual energy performance of school buildings in Brazil. This paper innovates by integrating questionnaire responses and billed energy data to allow the construction of an evidence-based stock model through a statistical approach, which was never performed for the Brazilian building stock. Moreover, the association of energy use intensity (EUI) with the core aspects of building characteristics, occupancy, environmental satisfaction and necessary improvements mapped the relevance of such aspects in energy usage patterns. Additionally, a discussion of the EUI indicators was addressed. Results showed an unprecedented broad panorama of the school building stock in Brazil and its main features. In terms of statistical analysis, the Weibull distribution was appropriate for representing the continuous variables of the stock. The EUI as a function of the number of students was more suitable than the floor-plan area to achieve a reliable energy performance analysis. Several tests were performed to assess if the energy management, environmental satisfaction and maintenance practices impacted the EUI or not. Finally, the main conclusion was that the stock model obtained was simple and fit the energy management structure in the Brazilian scenario. [ABSTRACT FROM AUTHOR]

• An innovative framework for energy benchmarking of buildings is proposed. • Entropy and cluster analysis reduced uncertainty in setting parameters of archetypes. • The machine learning technique used as a benchmarking tool showed high performance. • The benchmarking applied in actual buildings showed a high inefficiency ratio. Energy benchmarking of buildings has an important role in improving energy performance by establishing a reference for the energy efficiency of the building stock. The simulation of archetypes followed by a generalisation model has been widely used to obtain benchmarks. However, even though archetypes summarise the main features of the building stock, the uncertainties must be accounted for in the modelling process. Moreover, testing the response of the benchmarking model using the actual building stock data supports the reliability of the method. This paper aims to propose an innovative framework to reduce the uncertainty of archetypes for benchmarking buildings. A standard framework for data compiling is proposed and an assessment of the uncertainty of variables using entropy and cluster analysis allowed to obtain representative archetypes. An Artificial Neural Network (ANN) was used as a predictive tool, and it was applied to benchmark a sample of actual buildings. Also, the simulation outcomes were used to determine energy end-uses according to the climatic zones. The framework proposition is presented alongside with a practical application. The result is an unprecedented benchmarking model: the archetype considers more variation in parameters of the building stock with higher uncertainties. Additionally, the modelling process showed to be robust for combining different datasets, and the ANN achieved high-performance metrics. Conclusion indicates the potential of using the framework for other typologies. Moreover, the framework demonstration is used for a school stock in Brazil, showing a trend to the inefficiency while a specific case study was explored, showing the potential of the method to find faults in the building energy use. [ABSTRACT FROM AUTHOR]

Energy management has been considered in the global agenda as a way to improve energy performance and greenhouse gas reduction in organizations. Industries account for a significant part of energy use worldwide and present opportunities for energy efficiency improvements. Within the industry, energy management is a complex task, regarding scenarios with variables related to the following perspectives: economics, contingency, technological change and behavioural. This paper aims at analyzing the influencing factors on energy management in industries from these perspectives. A survey with 40 variables was carried out with middle managers from different industrial sectors in Brazil. The variables were divided into three groups: drivers for investments in energy efficiency; organizational processes and actions in energy management; involvement of middle managers. Initially, an exploratory factor analysis technique was employed aiming at specifying the main factors influencing energy management. In the sequence , a confirmatory factor analysis was used to associate the variables to the main factors as well as to know how the factors relate to each other. The study showed a positive correlation among all the factors identified. Statistical tests suggested that the factors could not be explained separately. Hypotheses tests were applied to verify the influence of the factors among the groups surveyed. The final model comprised eight factors into the three groups: organizational (strategic , operational), involvement (motivation, support), drivers (production, economics , competitiveness, environment). The results and the main implications of the study are discussed in the paper. • The main factors on energy management presented a positive correlation among them. • Middle managers' involvement influenced strategy and operation on energy management. • Middle managers' involvement depended on the support and motivation from superiors. • Operational factor on energy management influenced drivers for energy efficiency. • Production process was a driver for energy efficiency influencing energy management. [ABSTRACT FROM AUTHOR]

This paper tackles the short-term hydro-power unit commitment problem in a multi-reservoir system — a cascade-based operation scenario. For this, we propose a new mathematical modeling in which the goal is to maximize the total energy production of the hydro-power plant in a sub-daily operation, and, simultaneously, to maximize the total water content (volume) of reservoirs. For solving the problem, we discuss the Multi-objective Evolutionary Swarm Hybridization (MESH) algorithm, a recently proposed multi-objective swarm intelligence-based optimization method which has obtained very competitive results when compared to existing evolutionary algorithms in specific applications. The MESH approach has been applied to find the optimal water discharge and the power produced at the maximum reservoir volume for all possible combinations of turbines in a hydro-power plant. The performance of MESH has been compared with that of well-known evolutionary approaches such as NSGA-II, NSGA-III, SPEA2, and MOEA/D in a realistic problem considering data from a hydro-power energy system with two cascaded hydro-power plants in Brazil. Results indicate that MESH showed a superior performance than alternative multi-objective approaches in terms of efficiency and accuracy, providing a profit of $412,500 per month in a projection analysis carried out. • An efficient Multi-objective Evolutionary Swarm Hybrid algorithm is proposed. • Development of a nonlinear model to operational control of Hydro-power plants. • Hydro-power plant data regression obtains the maximum efficiency of the power units. • Efficiency energy goals achieved an increasing the profit in the energy production. [ABSTRACT FROM AUTHOR]

Abstract: The Brazilian government has started up a large social housing program for low-income families. Considering the large investment for this program, it is important to analyse the environmental impact to create a base for further improvement assessment. The goal of this paper is to visualise the energy use (embodied and operational) during the life cycle of case study for a house in the social housing program. The case study showed that the embodied energy (EE) is 7.2GJ/m2 or 30% of the total energy from the life cycle, the operational energy is 17.5GJ/m2. Half of the Embodied Energy is due to material use for maintenance and around 57% of the embodied energy is used in the wall construction. Compared to other international studies (5.8GJ/m2 per 50 years), the embodied energy is relative high (7.2GJ/m2 per 50 years) whereas the operational energy is only the half (17.5 compared to 36GJ/m2 per 50 year). The study indicates that the largest improvement potential for reducing the embodied energy is connected to the walls trough choosing materials and systems with less Embodied Energy and higher durability to decrease the need for maintenance and substitution of materials. [Copyright &y& Elsevier]

Abstract: This paper deals with the analysis and comparison of 7 (seven) numerical methods for the assessment of effectiveness in determining the parameters for the Weibull distribution, using wind speed data collected in Camocim and Paracuru cities, State of Ceará, in the northeast region of Brazil, in the period from August 2004 to April 2006, obtained by the Department of Infrastructure of the State of Ceará. One method is not well known, namely the equivalent energy method, and its performance is compared to the others. By using the methods of analysis of variance, RMSE (root mean square error), and chi-square tests to compare the proposed methods, this study aims to determine which ones are effective in determining the parameters of the Weibull distribution for the available data, in an attempt to establish acceptable criteria to a better utilization of wind power in the State of Ceará, which is a national prominence in the use of renewable sources for electricity generation in Brazil. [Copyright &y& Elsevier]

Developing counties are often believed to have excellent conditions for biofuel production, however studies aimed at assessing the sustainability of large scale biofuel programs have generally focused on a few variables related to one scientific domain and one scale. Contrary to this approach, this paper analyzes soybean biodiesel in Brazil using a parallel biophysical and economic assessment at different scales. A Multi-Scale Integrated Analysis of Societal and Ecosystem Metabolism (MuSIASEM) approach is applied as a scenario analysis tool. A soybean biodiesel energy balance for the specific conditions of Brazil is included and the energy ratio turns out to be 1.09. This means that the energy delivered is higher than the energy invested, however the net energy is very low. The economic impacts are analyzed through input–output analysis. The results show that soybean biodiesel increases energy consumption per hour of work without a corresponding increase in economic labor productivity. Consequently the already low energy efficiency of Brazilian production could get worse. Although Brazil has large expanses of land, the substitution of 20% fossil diesel (i.e. just 3.3% of the country's primary energy consumption) with fully renewable biodiesel might destroy protected areas and forests and increase the GHGs emitted. [Copyright &y& Elsevier]

Abstract: This paper addresses the application of Energy Efficiency Rating Technical Quality Regulations for Commercial, Service and Government Buildings – RTQ-C in order to ascertain whether the conventional construction system for buildings complies with these requirements. Additionally, it investigates the contribution of labeling to reducing electricity consumption by the building. To do so, the RTQ-C was applied to two buildings in order to calculate the efficiency levels of their envelopes and possible alterations are proposed for upgrading the envelope performance where pertinent. It is noted that conventional buildings adopting measures such as painting the walls and roof white, in addition to using smoked glass, are sufficient to bring the rating up to an A grade. As no specific concern was noted in the architectural designs for the buildings studied, making use of design strategies that minimize the use of electricity in these buildings, the findings of these case studies may well indicate that the RTQ-C has adopted technical requirements that are not particularly stringent. Consequently, it is believed that these requirements should be reviewed during a second stage, in order to make them more restrictive and attain further improvements in the constructed environment with better energy efficiency for buildings. [Copyright &y& Elsevier]

Abstract: This paper presents the results of an environmental impact assessment of biodiesel production from soybean in Brazil. In order to achieve this objective, environmental impact indicators provided by Emergy Accounting (EA), Embodied Energy Analysis (EEA) and Material Flow Accounting (MFA) were used. The results showed that for one liter of biodiesel 8.8kg of topsoil are lost in erosion, besides the cost of 0.2kg of fertilizers, about 5.2m2 of crop area, 7.33kg of abiotic materials, 9.0 tons of water and 0.66kg of air and about 0.86kg of CO2 were released. About 0.27kg of crude oil equivalent is required as inputs to produce one liter of biodiesel, which means an energy return of 2.48J of biodiesel per Joule of fossil fuel invested. The transformity of biodiesel (3.90E+05seJJ−1) is higher than those calculated for fossil fuels as other biofuels, indicating a higher demand for direct and indirect environmental support. Similarly, the biodiesel emergy yield ratio (1.62) indicates that a very low net emergy is delivered to consumers, compared to alternatives. Obtained results show that when crop production and industrial conversion to fuel are supported by fossil fuels in the form of chemicals, goods, and process energy, the fraction of fuel that can actually be considered renewable is very low (around 31%). [Copyright &y& Elsevier]

Abstract: The red ceramic industry in Brazil, consisting of over 7000 companies, requires large amounts of thermal energy, currently being met mainly by native fuelwood, which causes serious deforestation and soil erosion problems. The use of firewood does not allow achieving good energy performance in industrial ceramic kilns, causing high energy losses, low productivity and low quality products (bricks and roof tiles). Thus, to implement higher added value products, besides mitigate environmental problems caused by deforestation, the use of natural gas by the sector seems to be a promising alternative. Brazil’s natural gas market has grown at a fast pace in recent years. Its share in the country’s primary energy consumption increased from 3.7% to 9.3% between 1998 and 2007, compared to almost 21% in the world. The development of the Brazilian natural gas industry was grounded on stepping up supplies through integration with Bolivia from where natural gas is imported, together with fiscal incentives for promoting the demand. This paper estimates that the natural gas market that could be developed in the Brazilian red ceramic industry corresponds to less than 5% of the total industrial natural gas consumption, meaning that a major technological transformation of the country’s red ceramic industry will not severely affect the natural gas market equilibrium, contributing to reduce the country’s high rates of deforestation. [Copyright &y& Elsevier]

Abstract: Since the year 2000 or so there has been a rapid growth on fuel ethanol production and consumption, particularly in US and Brazil. Ethanol trade represented about 10% of world consumption in 2005, Brazil being the main exporter. The most important consumer markets—US and European Union (EU)—have trade regimes that constrained the comparative advantages of the most efficient producers, such as Brazil. This paper evaluates the fuel ethanol market up to 2030 together with the potential for international biotrade. Based on forecasts of gasoline consumption and on targets and mandates of fuel ethanol use, it is estimated that demand could reach 272Gl in 2030, displacing 10% of the estimated demand of gasoline (Scenario 1), or even 566Gl in the same year, displacing about 20% of the gasoline demand (Scenario 2). The analysis considers fuel ethanol consumption and production in US, EU-25, Japan, China, Brazil and the rest of the world (ROW-BR). Without significant production of ethanol from cellulosic materials in this period, displacing 10% of the gasoline demand in 2030, at reasonable cost, can only be accomplished by fostering fuel ethanol production in developing countries and enhancing ethanol trade. If the US and EU-25 reach their full production potential (based on conventional routes), the minimum amount that could be traded in 2030 would be about 34Gl. Displacing 20% of the gasoline demand by 2030 will require the combined development of second-generation technologies and large-scale international trade in ethanol fuel. Without second-generation technologies, Scenario 2 could become a reality only with large-scale production of ethanol from sugarcane in developing countries, e.g., Brazil and ROW-BR could be able to export at least 14.5Gl in 2010, 73.9Gl in 2020 and 71.8Gl in 2030. [Copyright &y& Elsevier]

There is consensus that the use of renewable energy must be expanded. More and more restrictions on the use of fossil derived fuels may open the way for an increased consumption of biomass event those so far not perceived as feasible, such some biomass residue. Energy derived from biomass residues may provide even more benefits because it may replace other sources of higher-grade energy while providing proper destination for residues. Biomass from pruning residue has been overlooked as an energy resource due to many limitations. This paper addresses the issue and the means for energy valuation of pruning residues while provides final destination for them. It presents a framework to overcome most of today's challenges across the world. A case study was carried out to determine the main constraints and how they can influence the decision-making process. The variety of urban pruning residues and their rate of generation, handling, storage, logistics, economic and environmental issues, institutional regulations for a small city in Southern Brazil were taken into consideration in the analysis. Pruning residues were sampled in the field, then handled, shredded, dried, specified, stored and burnt in a concurrent woodburning furnace for testing. The diagnostics of the constraints and the lab tests were summarized and organized in a framework that aimed to assess the energy valuation of pruning residues. Results show that with proper assessment tools, projects, biomass analyses and burning technology energy valuation of pruning residues can be feasible. • Energy valuation of biomass pruning residues is feasible given proper conditions. • A novel assessment framework provides routes to overcome most of today's challenges. • A case study of energy valuation of urban pruning biomass residue in Brazil showed feasible to generate 1 to 1.5 MWe. • Information and data of bulk density, moisture content, heating value, of residues of five urban tree species. • Estimate of opportunity costs of disposal of biomass pruning residues in landfills. [ABSTRACT FROM AUTHOR]

The energy performance of 11 bank branches in the Brazilian city of Curitiba was analysed using bottom-up engineering energy benchmarking method. As part of a previous study to classify bank buildings, these bank branches were selected for a further study with their building parametric and energy-related data obtained from building drawings and specifications as well as on-site surveys. The energy assessment of these branches was conducted using the existing (RTQ-C) and proposed (INI-C) Brazilian energy efficient labelling regulations for non-domestic buildings. The ability of both systems to produce results which are compatible and could be used to reflect the actual building energy consumption was examined. The study shows improvement of the INI-C system with calculation of energy consumption values and conditions for different reference buildings. However, performance gap between the calculated and actual energy consumption was found due to various reasons including reference values for office buildings were inaccurate for bank buildings. Hence, a list of modified reference values was proposed for bank buildings to represent bank buildings more accurately. This paper highlights the strengths and limitations of both the existing and proposed regulations and presents a reality check against the calculations of energy ratings and actual energy consumption of the buildings. It was concluded that the existing and proposed regulations have to be improved significantly in terms of calculation methodology in order to meet the demand of future energy policy in Brazil. [ABSTRACT FROM AUTHOR]

• General framework for the optimal net present value of smart appliance investment. • A Tree Algorithm with Interior Point speedup the framework in days. • Forty important economic cities in Brazil taken as case studies using real data. • Payback and return on investment measures are not enough for economic analysis. • Full set of results available online. Smart homes allow optimized energy usage, allowing households to reduce electricity bills or even make profits. By 2020, 20% of all households in Europe will be expected to become smart homes. Although smart homes seem to be the future for homes, many customers have the perception that a transition from current homes to smart ones is unprofitable. Adopting a smart home concept requires investments for which the households desire a positive return. A question in this context is the following: for a given household, when and/or what set of home appliances/technologies should be acquired so that the investment made by householder has a positive financial return? The available tool to answer that question can be time-consuming from a practical perspective. Based on our previous work, this paper proposes a framework to help the transition from current houses to smart homes considering customized electricity usage and economic measures. A tree algorithm is developed to decrease the time needed by an economic analysis of each possible acquisition combination of smart appliances or equipment for a given user. The proposed framework is tested on 40 cases covering all Brazilian capital cities, whose results are available online and may be used directly as an approximation for economic analyses. An example of one case is described in detail. Results show that the proposed tree algorithm is able to reduce days of CPU time to solve the problem and Net Present Value should be used as an economic measure to answer the aforementioned question. [ABSTRACT FROM AUTHOR]

Brazil, an emerging economy with more than 208 million inhabitants, is currently one of the biggest consumers of disposable diapers worldwide, generating huge waste streams to sanitary landfills or dumps. This take-make-dispose system causes high material and fuel consumption and serious environmental impacts. The concept of the Circular Economy, promoting that material flows should be circular, material and energy efficiency should be maximized and residues, as far as possible, designed out, has continuously gained attention over the last decade. For a Circular Economy, technological innovation, new business models and changes in consumer behavior are needed. The present study compares the use of modern cloth diapers and disposable diapers via a screening Life Cycle Assessment, checking conventional and innovative circular business models for the application of modern cloth diapers, such as the leasing or pay-per-service models, while focusing on the regional context of Brazil. Results indicate that cloth diapers show generally a better environmental performance than disposable diapers, whose poor performance is mainly due to their end-of-life treatment in sanitary or unsanitary landfill, provoking high greenhouse gas emissions. For cloth diapers, the most advantageous product system consists in a diaper-as-service model at large scale, using efficient continuous batch washers for sanitizing the diapers. Diaper-as-service models at smaller scale in so-called on-premise laundries show poorer environmental performance, due to higher water and energy needs. Domestic laundering of diapers is a good alternative regarding its environmental performance, because of its low energy consumption. However, consumers accustomed with disposable diapers might be reluctant to engage with this additional domestic labor. Image 1 • Disposable diapers hold bad environmental performance due to disposal in landfills. • Average conditions in Brazil lead to lower environmental impacts for cloth diapers. • Product-as-service-models should be used only with highly efficient batch washers. • The cotton used in absorbents of cloth diapers has significant influence on impacts. • Cloth diapers may be a bad choice or Brazil's regions with water scarcity. [ABSTRACT FROM AUTHOR]

Most European countries have committed to ambitious emissions reduction goals. Energy generation in particular is responsible for more than 30% of global emissions, where significant focus has been placed on renewable energy generation, including biomass. On the one hand, there are countries, like the UK, where the biomass stock is insufficient to meet the demand; on the other hand, there are countries, like Brazil, where the stock significantly exceeds the demand. To promote a natural symbiosis, it is necessary to take on the challenge of transporting biomass through long distances in an environmentally and economically efficient manner. This paper aims to assess the efficiency of alternative pathways of international biomass supply-chains. The alternatives involve different biomass origin regions, transportation modes, export ports and processing technologies, including torrefaction. Data Envelopment Analysis (DEA) has been used for the first time to assess the efficiency of the alternative biomass supply chain pathways in a Latin American context, considering multiple-criteria relating to economic and environmental performance simultaneously, such as the biomass delivered cost, the environmental impact and the fossil energy consumption. Additionally, a sensitivity analysis was performed to analyse the robustness of the results under uncertainty in parameter values. The DEA approach presented can assist the process of planning biomass sourcing and improve decision-making under multiple decision criteria. The results can support medium- and long-term strategic decisions for decision- and policy-makers. • Efficiency assessment of biomass supply chain pathways between Brazil and the UK. • 56 alternative pathways considered with different supply chain structure. • Data Envelopment Analysis used for multi-criteria efficiency assessment. • Results can support decision and policy making. • Trade-offs between different criteria identified. [ABSTRACT FROM AUTHOR]