Search

Special Feature that lists the names of people involved in the review of technical papers for the IEEE Transactions on Industry Applications and Industry Applications Magazine. [ABSTRACT FROM AUTHOR]

Voltage rise caused by high levels of distributed generation is manifesting as voltage regulation challenges for many electricity network service providers. In this environment it would be ideal to reduce supply voltage magnitudes, however, many network operators are hesitant to do so due to concerns related to consumer appliance performance at reduced supply voltage magnitudes. Voltage regulation requirements are defined by network standards and network service providers must ensure voltages remain within specified limits. Through an evaluation of domestic appliance performance when supplied at various voltage magnitudes, this paper examines the impact of varying voltage levels on residential appliances. Equipment energy demand, operation and actuation were monitored for each applied voltage magnitude. While no equipment failures were recorded, appliance behaviour varied significantly with applied voltage magnitude. Individual appliance conservation voltage reduction (CVR) factors have also been established. The results highlight the importance of good voltage regulation and provide substantiated appliance performance figures for future studies. The outcomes of this paper allow electricity network service providers to understand the implications of supply voltage magnitude on domestic appliance performance, whether it be understating of the impact of higher voltage magnitudes caused by distributed generation or implications of reducing voltage magnitudes to provide headroom for distributed generation integration. [ABSTRACT FROM AUTHOR]

Creatinine is a biochemical waste that is disseminated continually inside human blood. A synthetic polymer is developed in this study using Molecularly Imprinted Polymerization (MIP) technology with the precipitation polymerization method. The MIP polymer is used for finding the levels of creatinine from human serum samples with different creatinine concentrations. The MIP polymer is very selective to the specific adsorption of the molecules of creatinine. The produced MIP polymer is suitable for evaluating creatinine concentrations until 50 parts per million (ppm) that is thrice greater than the standard. The fabrication of chip-sized Micro-Electro-Mechanical-Systems (MEMS)-based interdigital (ID) sensors is described. The operation of the MEMS sensor is verified using the technique of Electrochemical Impedance Spectroscopy (EIS). The presented details of the development of MEMS ID sensor and creatinine specific MIP polymer are for detecting raised biotoxic waste levels, i.e. creatinine management is part of our research. The raised levels need monitoring by frequent pathological visits to those patients who have impaired kidney functioning. The complete system will be helpful for creatinine management at any time from home at a low cost. While early detection of an increase in creatinine and monitoring of kidney health to prevent further health-related complications are the goal of this research, results of up to 50 ppm are accessed. Until 50 ppm of MIP functionality is checked for confirming the MIP polymer adsorption of creatinine and the results are shown, which helps establish the sensing technology even if used for a patient with a high creatinine level. [ABSTRACT FROM AUTHOR]

Estimating depth from RGB images is a long-standing ill-posed problem, which has been explored for decades by the computer vision, graphics, and machine learning communities. Among the existing techniques, stereo matching remains one of the most widely used in the literature due to its strong connection to the human binocular system. Traditionally, stereo-based depth estimation has been addressed through matching hand-crafted features across multiple images. Despite the extensive amount of research, these traditional techniques still suffer in the presence of highly textured areas, large uniform regions, and occlusions. Motivated by their growing success in solving various 2D and 3D vision problems, deep learning for stereo-based depth estimation has attracted a growing interest from the community, with more than 150 papers published in this area between 2014 and 2019. This new generation of methods has demonstrated a significant leap in performance, enabling applications such as autonomous driving and augmented reality. In this paper, we provide a comprehensive survey of this new and continuously growing field of research, summarize the most commonly used pipelines, and discuss their benefits and limitations. In retrospect of what has been achieved so far, we also conjecture what the future may hold for deep learning-based stereo for depth estimation research. [ABSTRACT FROM AUTHOR]

This paper presents a systematic literature review of learning analytics dashboards (LADs) research that reports empirical findings to assess the impact on learning and teaching. Several previous literature reviews identified self-regulated learning as a primary focus of LADs. However, there has been much less understanding how learning analytics are grounded in the literature on self-regulated learning and how self-regulated learning is supported. To address this limitation, this review analyzed the existing empirical studies on LADs based on the well-known model of self-regulated learning proposed by Winne and Hadwin. The results show that existing LADs are rarely grounded in learning theory, cannot be suggested to support metacognition, do not offer any information about effective learning tactics and strategies, and have significant limitations in how their evaluation is conducted and reported. Based on the findings of the study and through the synthesis of the literature, the paper proposes that future research and development should not make any a priori design decisions about representation of data and analytic results in learning analytics systems such as LADs. To formalize this proposal, the paper defines the model for user-centered learning analytics systems (MULAS). The MULAS consists of the four dimensions that are cyclically and recursively interconnected including: theory, design, feedback, and evaluation. [ABSTRACT FROM AUTHOR]

Ramp metering offers great potential to mitigate traffic congestion and improve freeway management efficiency under traffic congestion conditions. This paper proposes an optimization program for freeway dynamic ramp metering based on Cell Transmission Model (CTM). This problem has been formulated as a discrete time optimal control problem with smooth state equations and constraints to meter traffic inflow from on-ramps. In the proposed model, the ‘min’ operators in the primal CTM are non-differentiable and thus, the corresponding optimal control problem cannot be solved directly using conventional gradient based methods. In this paper, we introduce a smooth approximation to approximate the ‘min’ operators and then a unified computational approach is developed to solve the problem. Theoretical analysis is carried out, showing that the optimal solution obtained from the approximated problem converges to the optimal solution of the primal CTM. Compared to the classical inequality relaxation method, our method can resolve the flow holding-back problem and reduce under fundamental diagram phenomenon. Compared with the Big-M method, our method has better efficiency. To achieve the desired traffic response control in real application, a series of online optimal control problems are solved using Model Predictive Control (MPC). Simulation studies show that our method can significantly improve freeway traffic management efficiency. [ABSTRACT FROM AUTHOR]

Traffic control optimization is a challenging task for various traffic centers around the world and the majority of existing approaches focus only on developing adaptive methods for normal (recurrent) traffic conditions. Optimizing the control plans when severe incidents occur still remains an open problem, especially when a high number of lanes or entire intersections are affected. This paper presents a novel methodology for optimizing the traffic signal timings in signalized urban intersections, under non-recurrent traffic incidents. With the purpose of producing fast and reliable decisions, we combine the fast running Machine Learning (ML) algorithms and the reliable Genetic Algorithms (GA) into a single optimization framework. Firstly, we deploy a typical GA algorithm by considering the phase duration as the decision variable and the objective function as the total travel time in the network. We fine tune the GA for crossover, mutation, fitness calculation and obtain the optimal parameters. Secondly, we train several regression models to predict the total travel time in the studied traffic network, and select the best performing model which we further hyper-tune. Lastly, we propose a new algorithm BGA-ML combining the GA algorithm and the extreme-gradient decision-tree (XGBT), which is the best performing regression model, together in a single optimization framework. Comparison and results are generated by two experiments (one synthetic and one from real urban traffic network) and show that the new BGA-ML is much faster than the original GA algorithm and can reduce the total travel time by almost half when used under incident conditions. [ABSTRACT FROM AUTHOR]

In this paper, an electric vehicle (EV) charging competition, among EV aggregators that perform coordinated EV charging, is explored while taking into consideration potential non-ideal actions of the aggregators. In the coordinated EV charging strategy presented in this paper, each aggregator determines EV charging start time and charging energy profiles to minimize overall EV charging energy cost by including consideration of the actions of the neighboring aggregators. The competitive interactions of the aggregators are modeled by developing a two-stage non-cooperative game among the aggregators. The game is then studied under prospect theory to examine the impacts of non-ideal actions of the aggregators in selecting EV charging start times according to subjectively evaluating their opponents’ actions. It is shown that the non-cooperative interactions among the aggregators lead to a subgame perfect $\epsilon $ -Nash equilibrium when the game is played with either ideal, or non-ideal, actions of the aggregators. A case study presented demonstrates that the benefits of the coordinated EV charging strategy, in terms of energy cost savings and peak-to-average ratio reductions, are significantly resilient to non-ideal actions of the aggregators. [ABSTRACT FROM AUTHOR]

Contribution: This paper introduces the real-world limitations and non-technical aspects of power electronics (PEs) projects to students through innovative tutorial activities. Background: Many electrical engineering curricula offer a PE courses (PECs) for third- or fourth-year undergraduate students. Prior research on PEs education mainly focused on improving students’ experimental skills through developing practical experiments, laboratory activities, and problem/project-based learning. An instructional approach that instead employs real-world knowledge and skills is worth evaluating. Intended Outcomes: Students should be able to consider real-world technical and non-technical limitations when applying theory to design PE circuits and converters, and be able to select and carry out appropriate tests to troubleshoot circuits. Application Design: Prior research on engineering education emphasized the importance of introducing real-world limitations to the students as part of their curriculum. This paper suggests that the tutorial activities presented in a PEC can help students acquire skills in designing and troubleshooting a circuit or system according to desired technical aspects, real-world limitations, and available data. Findings: Evidence of the validity of this approach in a PEC at two Australian universities, over four academic years, is provided. Students receiving the new tutorial activities had percentage scores some 10–15 points higher than those who had traditional tutorials. Another evaluation reveals the students’ vibrant participation in the activities during the new tutorial sessions. [ABSTRACT FROM AUTHOR]

Rooftop solar and batteries, along with other distributed energy resources (DERs), add a new demand-side flexibility, which, when harnessed, will enable distribution operators to more efficiently manage their constrained networks. This paper presents network-aware coordination (NAC), an approach for coordinating DER within unbalanced distribution network constraints, which utilizes the alternating direction method of multipliers (ADMMs) to solve a distributed receding-horizon OPF. As far as we are aware, this paper is the first to report on the practical implementation and performance of an ADMM-based technique solving a significant network problem in live operations. We present real-world trial results of NAC coordinating 31 residential batteries on a constrained feeder within Tasmania’s 11-kV distribution network. The batteries are coordinated to manage the network’s constraints during periods of high feeder demand, decreasing the need for expensive conventional network management, in this case a diesel generator. We achieve a 34% reduction in diesel over seven peaks with 31 batteries capable of meeting 10% of peak demand. Supplementary simulations indicate the potential for a 74% diesel reduction if battery numbers were increased to 100. We find that compared to uncoordinated battery response, the NAC achieves 13% lower total costs over the trial period. [ABSTRACT FROM AUTHOR]

Despite the recent progress in speech emotion recognition (SER), state-of-the-art systems lack generalisation across different conditions. A key underlying reason for poor generalisation is the scarcity of emotion datasets, which is a significant roadblock to designing robust machine learning (ML) models. Recent works in SER focus on utilising multitask learning (MTL) methods to improve generalisation by learning shared representations. However, most of these studies propose MTL solutions with the requirement of meta labels for auxiliary tasks, which limits the training of SER systems. This paper proposes an MTL framework (MTL-AUG) that learns generalised representations from augmented data. We utilise augmentation-type classification and unsupervised reconstruction as auxiliary tasks, which allow training SER systems on augmented data without requiring any meta labels for auxiliary tasks. The semi-supervised nature of MTL-AUG allows for the exploitation of the abundant unlabelled data to further boost the performance of SER. We comprehensively evaluate the proposed framework in the following settings: (1) within corpus, (2) cross-corpus and cross-language, (3) noisy speech, (4) and adversarial attacks. Our evaluations using the widely used IEMOCAP, MSP-IMPROV, and EMODB datasets show improved results compared to existing state-of-the-art methods. [ABSTRACT FROM AUTHOR]

This paper describes the results obtained for the affective engagement of students with systems thinking (ST). In prior work, the authors have developed and validated a questionnaire instrument for measuring affective engagement of undergraduate engineering students with ST. This paper presents results obtained when the questionnaire was used with undergraduate students. Two surveys with different versions of the questionnaire, one using positive grammar questions only and the other using a mix of positive and negative constructs, were used to measure the students’ engagement with ST and its relationship with gender, age, and work experience. Each questionnaire version was applied to a different sample, the first, 186 participants, completed the positive grammar version, and, the second group of 163 completed the mixed version. The results show that participants in both studies valued ST in each of the three dimensions of the ST construct. Statistical tests confirmed no significant gender differences in either study. Student engagement with the practical dimension of ST was shown to vary, with statistical significance, with groups of age, years of work experience, and country of the university. [ABSTRACT FROM AUTHOR]

Traffic flow prediction is an integral part of an intelligent transportation system and thus fundamental for various traffic-related applications. Buses are an indispensable way of moving for urban residents with fixed routes and schedules, which leads to latent travel regularity. However, human mobility patterns, specifically the complex relationships between bus passengers, are deeply hidden in this fixed mobility mode. Although many models exist to predict traffic flow, human mobility patterns have not been well explored in this regard. To address this research gap and learn human mobility knowledge from this fixed travel behaviors, we propose a multi-pattern passenger flow prediction framework, MPGCN, based on Graph Convolutional Network (GCN). Firstly, we construct a novel sharing-stop network to model relationships between passengers based on bus record data. Then, we employ GCN to extract features from the graph by learning useful topology information and introduce a deep clustering method to recognize mobility patterns hidden in bus passengers. Furthermore, to fully utilize spatio-temporal information, we propose GCN2Flow to predict passenger flow based on various mobility patterns. To the best of our knowledge, this paper is the first work to adopt a multi-pattern approach to predict the bus passenger flow by taking advantage of graph learning. We design a case study for optimizing routes. Extensive experiments upon a real-world bus dataset demonstrate that MPGCN has potential efficacy in passenger flow prediction and route optimization. [ABSTRACT FROM AUTHOR]

This paper proposes a novel reactive power-based control strategy for single-phase PV inverters (PVIs) to simultaneously improve voltage unbalance (VU) and voltage regulation (VR) in low-voltage distribution networks. The proposed strategy relies on communication links between neighboring PVIs to exchange limited data. In this strategy, each PVI finds communication paths between itself and the closest neighboring ones connected to other phases. Then, using the obtained paths and the maximum and the minimum voltage magnitude of the grid, PVIs improve both VU and VR at the same time. The performance of the proposed control strategy is evaluated by various simulation studies using the IEEE European low-voltage test feeder and considering different operational conditions. In addition, the impacts of moving clouds and a failure in the communication links have been assessed. The simulation results exhibit that using the proposed control strategy, the voltage magnitude of all the nodes will remain within the allowed limits and at the same time, the phase voltage unbalance factor will be also significantly improved. [ABSTRACT FROM AUTHOR]

Infrastructure-to-vehicle (I2V) and vehicle-to-vehicle (V2V) communications are often combined to extend the connectivity and coverage in the Intelligent Transportation System (ITS) and its applications, e.g., augmented reality, real-time parking management and online shopping. Through multi-hop I2V and V2V communications, requesting vehicles are always connected to road side units (RSUs) even when they do not reside within the RSUs’ coverage range. However, there may be not adequate network resource for several I2V and V2V links when multiple vehicles request services simultaneously. In this paper, we propose a joint frequency scheduling and power control scheme to enhance connectivity in multi-hop I2V/V2V networks. We associate I2V and V2V links with tuple-links, then formulate an NP-hard problem in which a frequency scheduler and a power controller are jointly designed for the tuple-links. The NP-hard problem is decomposed into two separate subproblems by employing the delayed column generation technique. Then, we employ a method for linear programming and a greedy algorithm to address these subproblems. Through numerical experiments with practical parameter settings, we demonstrate the proposed scheme outperforms several existing ones in terms of connectivity enhancement, measured by the service resumption number and average achieved throughput. Furthermore, the efficiency of our scheme is further enhanced when the number of available channels is high, and buffer size equipped to the requesting vehicles is large. [ABSTRACT FROM AUTHOR]

This paper discusses the problem of controlling formation shapes for a group of nonholonomic unicycle-type agents with constant speeds. The control input is designed to steer their orientations and the aim is to achieve a desired formation configuration for all the agents subject to constant-speed constraints. The circular motion center is adopted as a virtual position for each agent to define the desired formation shape. We consider several different formation design approaches based on different formation specifications under different interaction graphs. In particular, two different formation design approaches, namely, a displacement-based approach and a distance-based approach, are discussed in detail to coordinate constant-speed agents in achieving a desired formation shape with stable circular motions via limited interactions. The communication and measurement requirements for each approach are also discussed. Furthermore, we propose a combined controller to stabilize a formation shape and synchronize the heading of each agent simultaneously. The effectiveness of the proposed formation control schemes is validated by both numerical simulations and real experiments with actual unmanned fixed-wing aircraft. [ABSTRACT FROM AUTHOR]

This paper presents an algorithm for detection, classification, and characterization of voltage sags and swells in electricity networks using three-phase voltage ellipse parameters. The proposed method employs the instantaneous magnitude of three-phase voltage signals in three axes, which are separated from each other by 120 ^\circ . Thus, the resultant rotating vector, namely, the three-phase voltage vector, traces an ellipse. Then, the parameters of the ellipse, which include minor axis, major axis, and inclination angle, are used to develop the proposed algorithm for classification and characterization of voltage sags and swells. The proposed method is validated using real data of the IEEE working group and some measured real data of the Belgian transmission grid. The method is further tested for the sags and swells generated due to balanced and unbalanced faults at different buses, in test distribution networks (radial and mesh type) embedded with distributed generation and in a practical distribution network of Australia. This paper also demonstrates the proposed algorithm as a real-time sag/swell monitoring tool. [ABSTRACT FROM PUBLISHER]

Cooperative co-evolution (CC) is an evolutionary computation framework that can be used to solve high-dimensional optimization problems via a “divide-and-conquer” mechanism. However, the main challenge when using this framework lies in problem decomposition. That is, deciding how to allocate decision variables to a particular subproblem, especially interacting decision variables. Existing decomposition methods are typically computationally expensive. In this paper, we propose a new decomposition method, which we call recursive differential grouping (RDG), by considering the interaction between decision variables based on nonlinearity detection. RDG recursively examines the interaction between a selected decision variable and the remaining variables, placing all interacting decision variables into the same subproblem. We use analytical methods to show that RDG can be used to efficiently decompose a problem, without explicitly examining all pairwise variable interactions. We evaluated the efficacy of the RDG method using large scale benchmark optimization problems. Numerical simulation experiments showed that RDG greatly improved the efficiency of problem decomposition in terms of time complexity. Significantly, when RDG was embedded in a CC framework, the optimization results were better than results from seven other decomposition methods. [ABSTRACT FROM AUTHOR]

In this paper, we analyze the coverage probability and the area spectral efficiency (ASE) for the uplink (UL) of dense small cell networks (SCNs) considering a practical path loss model incorporating both line-of-sight (LoS) and non-line-of-sight (NLoS) transmissions. Compared with the existing work, we adopt the following novel approaches in this paper: 1) we assume a practical user association strategy (UAS) based on the smallest path loss, or equivalently the strongest received signal strength; 2) we model the positions of both base stations (BSs) and the user equipments (UEs) as two independent homogeneous Poisson point processes; and 3) the correlation of BSs’ and UEs’ positions is considered, thus making our analytical results more accurate. The performance impact of LoS and NLoS transmissions on the ASE for the UL of dense SCNs is shown to be significant, both quantitatively and qualitatively, compared with existing work that does not differentiate LoS and NLoS transmissions. In particular, existing work predicted that a larger UL power compensation factor would always result in a better ASE in the practical range of BS density, i.e., 10^1\sim 10^3\,\textrm BSs/km^2 . However, our results show that a smaller UL power compensation factor can greatly boost the ASE in the UL of dense SCNs, i.e., 10^2\sim 10^3\,\textrm BSs/km^2 , while a larger UL power compensation factor is more suitable for sparse SCNs, i.e., 10^1\sim 10^2\,\textrm BSs/km^2 . [ABSTRACT FROM PUBLISHER]

Video-based human action recognition is currently one of the most active research areas in computer vision. Various research studies indicate that the performance of action recognition is highly dependent on the type of features being extracted and how the actions are represented. Since the release of the Kinect camera, a large number of Kinect-based human action recognition techniques have been proposed in the literature. However, there still does not exist a thorough comparison of these Kinect-based techniques under the grouping of feature types, such as handcrafted versus deep learning features and depth-based versus skeleton-based features. In this paper, we analyze and compare 10 recent Kinect-based algorithms for both cross-subject action recognition and cross-view action recognition using six benchmark datasets. In addition, we have implemented and improved some of these techniques and included their variants in the comparison. Our experiments show that the majority of methods perform better on cross-subject action recognition than cross-view action recognition, that the skeleton-based features are more robust for cross-view recognition than the depth-based features, and that the deep learning features are suitable for large datasets. [ABSTRACT FROM AUTHOR]

This paper presents a computationally efficient smart home energy management system (SHEMS) using an approximate dynamic programming (ADP) approach with temporal difference learning for scheduling distributed energy resources. This approach improves the performance of an SHEMS by incorporating stochastic energy consumption and PV generation models over a horizon of several days, using only the computational power of existing smart meters. In this paper, we consider a PV-storage (thermal and battery) system, however, our method can extend to multiple controllable devices without the exponential growth in computation that other methods such as dynamic programming (DP) and stochastic mixed-integer linear programming (MILP) suffer from. Specifically, probability distributions associated with the PV output and demand are kernel estimated from empirical data collected during the Smart Grid Smart City project in NSW, Australia. Our results show that ADP computes a solution much faster than both DP and stochastic MILP, and provides only a slight reduction in quality compared to the optimal DP solution. In addition, incorporating a thermal energy storage unit using the proposed ADP-based SHEMS reduces the daily electricity cost by up to 26.3% without a noticeable increase in the computational burden. Moreover, ADP with a two-day decision horizon reduces the average yearly electricity cost by a 4.6% over a daily DP method, yet requires less than half of the computational effort. [ABSTRACT FROM AUTHOR]

Compared with other applications in computer vision, convolutional neural networks (CNNs) have underperformed on pedestrian detection. A breakthrough was made very recently using sophisticated deep CNN (DCNN) models, with a number of handcrafted features or explicit occlusion handling mechanism. In this paper, we show that by reusing the convolutional feature maps of a DCNN model as image features to train an ensemble of boosted decision models, we are able to achieve the best reported accuracy without using specially designed learning algorithms. We empirically identify and disclose important implementation details. We also show that pixel labeling may be simply combined with a detector to boost the detection performance. By adding complementary handcrafted features such as optical flow, the DCNN-based detector can be further improved. We advance the state-of-the-art results by lowering the log-average miss rate from 11.7% to 8.9% on the Caltech data set and from 11.2% to 8.6% on the Inria data set. We also achieve a comparable result to state-of-the-art approaches on the KITTI data set. [ABSTRACT FROM AUTHOR]

Cameras have been widely used in traffic operations. While many technologically smart camera solutions in the market can be integrated into Intelligent Transport Systems (ITS) for automated detection, monitoring and data generation, many Network Operations (a.k.a Traffic Control) Centres still use legacy camera systems as manual surveillance devices. In this paper, we demonstrate effective use of these older assets by applying computer vision techniques to extract traffic data from videos captured by legacy cameras. In our proposed vision-based pipeline, we adopt recent state-of-the-art object detectors and transfer-learning to detect vehicles, pedestrians, and cyclists from monocular videos. By weakly calibrating the camera, we demonstrate a novel application of the image-to-world homography which gives our monocular vision system the efficacy of counting vehicles by lane and estimating vehicle length and speed in real-world units. Our pipeline also includes a module which combines a convolutional neural network (CNN) classifier with projective geometry information to classify vehicles. We have tested it on videos captured at several sites with different traffic flow conditions and compared the results with the data collected by piezoelectric sensors. Our experimental results show that the proposed pipeline can process 60 frames per second for pre-recorded videos and yield high-quality metadata for further traffic analysis. [ABSTRACT FROM AUTHOR]

Traditional bi-level origin-destination (OD) matrix estimation process adjusts the matrix (at the upper level) based on the deviation between the observed and simulated traffic counts. The problem is mathematically under-determined, and the quality of the solution can be enhanced by restricting the upper level search space with information from other sources. This paper presents a methodology that assimilates sub-path flows in the upper level objective function. The contributions of the study are two-fold: first, it proposes the idea of “structural comparison of sub-path flows” to relax the requirement of “known” penetration rate of vehicles’ trajectories; second, it proposes an innovative upper level formulation where the structural difference between the observed and assigned sub-path flows is integrated with the traditional deviations between the observed and assigned link flows. The sub-path flows can be estimated from advanced data sources such as Bluetooth MAC scanner. The proposed methodology is tested using simulation on a realistic network from Brisbane, Australia and results indicate its practical relevance for situations when the penetration rate of Bluetooth trajectories is generally unknown. The proposed method has a better ability to maintain structural consistency and showed considerable improvements in the quality of OD estimates as compared to the traditional traffic counts-based approach. [ABSTRACT FROM AUTHOR]

Transit passenger market segmentation enables transit operators to target different classes of transit users for targeted surveys and various operational and strategic planning improvements. However, the existing market segmentation studies in the literature have been generally done using passenger surveys, which have various limitations. The smart card (SC) data from an automated fare collection system facilitate the understanding of the multiday travel pattern of transit passengers and can be used to segment them into identifiable types of similar behaviors and needs. This paper proposes a comprehensive methodology for passenger segmentation solely using SC data. After reconstructing the travel itineraries from SC transactions, this paper adopts the density-based spatial clustering of application with noise (DBSCAN) algorithm to mine the travel pattern of each SC user. An a priori market segmentation approach then segments transit passengers into four identifiable types. The methodology proposed in this paper assists transit operators to understand their passengers and provides them oriented information and services. [ABSTRACT FROM PUBLISHER]

In this paper, we investigate movement patterns of a particle in the particle swarm optimization (PSO) algorithm. We characterize movement patterns of the particle by two factors: 1) the correlation between its consecutive positions and 2) its range of movement. We introduce the base frequency of movement as a measure for the correlation between positions and the variance of movement as a measure for the range of movement. We determine the base frequency and the variance of movement theoretically and we show how they change with the values of coefficients. We extract a system of equations that enables practitioners to find coefficients’ values to guarantee achieving a given base frequency and variance of movement, i.e., control the movement pattern of particles. We also show that if the base frequency of movement for a particle is small, mid range, or large then the particle’s position at each iteration is positively correlated (smooth movement), uncorrelated (chaotic movement), or negatively correlated (jumping at each iteration) with its previous positions, respectively. We test the effects of the base frequency and variance of movement on the search ability of particles and we show that small base frequencies (i.e., smooth movement) are more effective when the maximum number of function evaluations is large. We found that the most frequently-used coefficient values in PSO literature impose mid-range base frequencies that correspond with a chaotic movement. We also provide new sets of coefficients that outperform existing ones on a set of benchmark functions. [ABSTRACT FROM AUTHOR]

Operational performance in the low-voltage distribution network (LVDN) can be undermined by its inherent unbalances, which may become worse as the penetration of rooftop solar continuously increases. To address this issue, load balancing via phase-reconfiguration devices (PRDs), which can change phase positions of residential customers as required, provides a cost-efficient option. However, most reported approaches to control PRDs require that demands of all residential customers are available, which are not viable for many LVDNs without smart meters or advanced metering infrastructure (AMI) installed. To bridging the gap in this field, this paper proposes a novel method to control PRDs purely based on measurable data from PRDs, and its controller. Based on limited information, sensitivity analysis in the network with PRDs is studied, followed by the optimization model that comprehensively considers operational requirements in the network. Moreover, slack variables are introduced to the model, and penalized in the objective function to assure either a strategy that is secure or with minimized violations can always be provided. The model is a challenging mixed-integer non-convex programming (MINCP) problem, which is reformulated as an efficient solvable mixed-integer second-order cone programming (MISOCP) based on exact reformulations or accurate linear approximations. Simulations based on two modified IEEE systems, and a real system in Australia demonstrate that an efficient strategy can be provided to mitigate unbalances in the network. [ABSTRACT FROM AUTHOR]

Economic dispatch is a critical problem in operation of power grids. A consensus-based algorithm was recently proposed to solve the economic dispatch problem in a distributed manner. In this paper, we propose a novel secure scheme for the consensus-based economic dispatch algorithm using the Paillier cryptosystem. This secure scheme ensures that not only the network transmitted information is protected from external malicious party but also the privacy information of each node remains intact. The proposed secure scheme has two features. First, it relies on the solution to the so-called structural consensus problem with time-varying network weights. Second, it contains a strategy for transmitting encrypted information and generating network weights with randomness, as well as treatment of the practical issues like quantization error and computation overflow/underflow. The performance in terms of cost optimization and privacy-preserving is verified by rigorous theoretical analysis and numerical simulation. [ABSTRACT FROM AUTHOR]

Due to the unknown spatio-temporal distribution of a battery electric vehicle’s (BEVs) charging load, introducing large quantities of BEVs into the transportation sector has drawn growing concerns about the negative impacts on the power grid system. Based on real-world vehicle driving survey data, this paper presents a deterministic and a probabilistic model to quantitatively investigate the spatio-temporal distribution of BEV charging load for Australia. Whilst the trip-chain-related travel parameters for the deterministic model are directly taken from travel survey data, those for the probabilistic model are generated by the ${k}$ -nearest-neighbor algorithm. The probabilistic model is validated and applied to simulate the spatio-temporal distribution of BEV load based on GIS-gridded data for Australia. We are able to distinguish different temporal BEV charging load distributions for weekdays vs. weekends, and with heavy spatial concentration in capital cities. [ABSTRACT FROM AUTHOR]

As networks expand in size and complexity, they pose greater administrative and management challenges. Software-defined networks (SDNs) offer a promising approach to meeting some of these challenges. In this paper, we propose a policy-driven security architecture for securing end-to-end services across multiple SDN domains. We develop a language-based approach to design security policies that are relevant for securing SDN services and communications. We describe the policy language and its use in specifying security policies to control the flow of information in a multi-domain SDN. We demonstrate the specification of fine-grained security policies based on a variety of attributes, such as parameters associated with users and devices/switches, context information, such as location and routing information, and services accessed in SDN as well as security attributes associated with the switches and controllers in different domains. An important feature of our architecture is its ability to specify path- and flow-based security policies that are significant for securing end-to-end services in SDNs. We describe the design and the implementation of our proposed policy-based security architecture and demonstrate its use in scenarios involving both intra- and inter-domain communications with multiple SDN controllers. We analyze the performance characteristics of our architecture as well as discuss how our architecture is able to counteract various security attacks. The dynamic security policy-based approach and the distribution of corresponding security capabilities intelligently as a service layer that enables flow-based security enforcement and protection of multitude of network devices against attacks are important contributions of this paper. [ABSTRACT FROM AUTHOR]

This paper presents a novel method to determine the optimal routing of medium voltage distribution networks in sparse rural areas. The objective is evaluated through minimizing the net present cost of the network over a selected time period. A problem specific genetic algorithm is proposed to address the optimal network routing problem and compute the optimized topology throughout a geographically constrained region. The proposed method simultaneously considers nonfixed candidate lines to overcome search space restrictions through a variable length encoding structure and the use of Steiner points, and a shortest path algorithm to traverse between point-to-point connections in the constrained region. Geographical restrictions on network routing are considered through the formation of a rasterized map. The network is modeled at the branch level and considers both greenfield and expansion planning to highlight the effects of accessibility restrictions. The optimization model is applied to a real rural distribution network in the South–West of Western Australia. Alternative network topologies are found to provide significant improvements over the existing network and traditional reconfiguration based methods for evaluating the minimum cost sparse rural distribution network. [ABSTRACT FROM AUTHOR]

Stand-alone operation of distributed generations (DGs) under an islanded mode is achieved by appropriate switching of controllers from grid-parallel to stand-alone mode. Conversely, during grid restoration, reverse switching operation is employed. These operations cause voltage quality issues; among these issues, voltage dips and swells are two crucial events that are encountered during and subsequent to islanding. This paper characterizes the voltage dips and/or swells caused by the islanding of DG and its subsequent pre- and post-islanding events. Pre-islanding events encompass the fault-initiated islanding scenarios, whereas postislanding events are associated with transitional state, island stabilization, and grid-reconnection states. Considering pre- and post-islanding scenarios, this paper classifies and characterizes the voltage dips and swells using an algorithm incorporating three-phase voltage ellipse and three-dimensional (3-D) polarization ellipse parameters. Three-phase voltage ellipse parameters, namely, major axis, minor axis, and inclination angle of an ellipse, are exploited for characterization and classification of voltage dips/swells based on their affected phases, whereas 3-D polarization ellipse parameters are employed for classifying seven dip types, namely, A, B, D, F, E, C, and G. Islanding and its subsequent scenarios are simulated using a test distribution network of Australia embedded with DG, and the voltage dips and swells are characterized using the proposed algorithm. [ABSTRACT FROM AUTHOR]

Compared with traditional models, semi-random epidemic network models may be more reasonable to describe the real dynamics of many epidemics. In this paper, we first investigate the optimal control problem (OCP) of semi-random epidemic networks. By using the Pontryagin’s minimum principle, we obtain the optimal control strategy aimed to minimize the total epidemic incidence and control cost. We then define a centrality index which can measure average control strength of the optimal control. Based on this index, the OCP is converted into a static OCP (SOCP), whose solution is utilized to design a nonidentical constant control (NCC). NCC is suboptimal as it is optimal on a subset of the whole control set, and is determined by only the network’s clustering coefficient and initial condition. We finally propose an effective targeted constant quarantine control by using this centrality index. The results uncover the relationship between the optimal control and the network’s topological structure, provide a convenient method to determine suboptimal control, and present a strategy for targeted constant control. This paper can help to design effective control strategies for more general epidemic networks in the real world. [ABSTRACT FROM AUTHOR]

As a key part of modern power systems, DC microgrid is becoming increasingly important. Among different control methods for DC microgrid, secondary control has been widely investigated since it can guarantee both current sharing and DC bus voltage restoration. However, the existing secondary control results only consider fixed current sharing ratio among DC converters, and thus they cannot be applied to the case where an adjustable current sharing ratio is desired. Motivated by this observation, this paper presents a new distributed secondary control strategy. By imposing a time-varying droop gain and specifying the “virtual voltage drop,” this strategy is able to ensure adjustable current sharing ratio among DC converters. Moreover, the effects of time delay on the control performance is also analyzed. Three case studies and two hardware-in-the-loop (HIL) tests are provided to verify the efficacy of the presented strategy. [ABSTRACT FROM AUTHOR]

Online social networks (OSNs) suffer from forged messages. Current studies have typically been focused on the detection of forged messages and do not provide the analysis of the behaviors of message publishers and network strategies to suppress forged messages. This paper carries out the analysis by taking a game theoretic approach, where infinitely repeated games are constructed to capture the interactions between a publisher and a network administrator and suppress forged messages in OSNs. Critical conditions, under which the publisher is disincentivized to publish any forged messages, are identified in the absence and presence of misclassification on genuine messages. Closed-form expressions are established for the maximum number of forged messages that a malicious publisher could publish. Confirmed by the numerical results, the proposed infinitely repeated games reveal that forged messages can be suppressed by improving the payoffs for genuine messages, increasing the cost of bots, and/or reducing the payoffs for forged messages. The increasing detection probability of forged messages or decreasing misclassification probability of genuine messages also has a strong impact on the suppression of forged messages. [ABSTRACT FROM AUTHOR]

During the COVID-19 pandemic, there has been an increasing rollout of non-contact fever screening solutions to assist in curbing the spread of disease. This study begins by describing how screening for disease has historically been performed. It proposes four measurement characteristics of an ideal screening solution: non-contact, effective, rapid and low-cost measurements. Next, it reviews the existing literature on fever-screening using non-contact infrared thermometer (NCIT) devices as well as infrared thermography (IRT) devices, as these are two technologies which have experienced increasing use. For this review, 185 research papers were identified, 21 research studies were included after inclusion and exclusion criteria were applied. A total of 35 experiments were identified for analysis and their results tabulated. Of these studies, 66% are IRT and 34% are NCIT, with a median sample size of 430 subjects. 26 experiments involve febrile participants, with a median febrile percentage of 11.22 % of population. The reported sensitivity of febrile detection using NCIT varies from 3.7% to 97% and when using IRT it varies from 15% to 100%. Both indoor and outdoor studies are investigated, as well as those conducted in acute and non-acute settings. The results of this review show a clear lack of consensus on the effectiveness of these systems. Overall, these results indicate that sensitivity and specificity are reduced when using IRT and NCIT technologies compared to other thermometers used in medical practice. Their use should be carefully assessed based on the risks present in each particular measurement scenario. [ABSTRACT FROM AUTHOR]

In this paper, we introduce a sophisticated path loss model incorporating both line-of-sight (LoS) and non-line-of-sight (NLoS) transmissions to study their impact on the performance of dense small cell networks (SCNs). Analytical results are obtained for the coverage probability and the area spectral efficiency (ASE), assuming both a general path loss model and a special case with a linear LoS probability function. The performance impact of LoS and NLoS transmissions in dense SCNs in terms of the coverage probability and the ASE is significant, both quantitatively and qualitatively, compared with the previous work that does not differentiate LoS and NLoS transmissions. Our analysis demonstrates that the network coverage probability first increases with the increase of the base station (BS) density, and then decreases as the SCN becomes denser. This decrease further makes the ASE suffer from a slow growth or even a decrease with network densification. The ASE will grow almost linearly as the BS density goes ultra dense. For practical regime of the BS density, the performance results derived from our analysis are distinctively different from previous results, and thus shed new insights on the design and deployment of future dense SCNs. [ABSTRACT FROM PUBLISHER]

In this paper, we analyze the maximum likelihood decoding performance of Raptor codes with a systematic low-density generator-matrix code as the pre-code. By investigating the rank of the product of two random coefficient matrices, we derive upper and lower bounds on the decoding failure probability. The accuracy of our analysis is validated through simulations. Results of extensive Monte Carlo simulations demonstrate that for Raptor codes with different degree distributions and pre-codes, the bounds obtained in this paper are of high accuracy. The derived bounds can be used to design near-optimum Raptor codes with short and moderate lengths. [ABSTRACT FROM AUTHOR]

Nonlinear preprocessors, including conventional clipping, blanking, joint blanking/clipping, and deep clipping, have been employed to mitigate the impulsive noise in orthogonal frequency division multiplexing-based power-line communications. Those nonlinear preprocessors are characterized by one or two thresholds, which are optimized to achieve an optimum output signal-to-noise ratio (SNR). In this paper, we aim to further improve the output SNR by linearly combining two nonlinear preprocessors. Both analytical and simulation results show that the proposed method yields better output SNR and symbol/bit error rate performance than the individual ones. [ABSTRACT FROM PUBLISHER]

In automotive infotainment systems, vehicles using the applications are serviced via continuous infrastructure-to-vehicle (I2V) communications. Additionally, the I2V communications can be combined with vehicle-to-vehicle (V2V) connectivity owing to the small area covered by road side units (RSUs). However, dozens of vehicles have to compete for limited bandwidth when they request service simultaneously in the covered area. In this paper, we propose a joint scheduling and power control scheme for I2V and V2V links in the RSUs’ coverage range. Mapping the I2V and V2V links to tuple-links, we formulate a mixed-integer nonlinear programming (MINLP) problem where frequency scheduler and power controller for those tuple-links are jointly designed. Then, we employ the delayed column generation technique and the transmission pattern definition to decompose the MINLP problem into a transmission pattern scheduling problem, as well as a power control problem. Therein, the transmission pattern scheduling problem is solved by linear programming while a greedy power control algorithm is developed. Simulation results with practical parameter settings show that our proposed scheme outperforms several conventional schemes in terms of service disruption and achieved throughput while maintaining throughput fairness among the requesting vehicles. In particular, a high channel number, a small power level number, and a large buffer size at the requesting vehicles are shown to be helpful for our proposed scheme. [ABSTRACT FROM AUTHOR]

Room-scale 3D position tracking enables users to explore a virtual environment by physically walking, which improves comfort and the level of immersion. However, when users walk with their eyesight blocked by a head-mounted display, they may unexpectedly lose their balance and fall if they bump into real-world obstacles or unintentionally shift their center of mass outside the margin of stability. This paper evaluates balance recovery methods and intervention timing during the use of VR with the assumption that the onset of a fall is given. Our experiment followed the tether-release protocol during clinical research and induced a fall while a subject was engaged in a secondary 3D object selection task. The experiment employed a two-by-two design that evaluated two assistive techniques, i.e., video-see-through and auditory warning at two different timings, i.e., at fall onset and 500ms prior to fall onset. The data from 17 subjects showed that video-see-through triggered 500 ms before the onset of fall can effectively help users recover from falls. Surprisingly, video-see-through at fall onset has a significant negative impact on balance recovery and produces similar results to those of the baseline condition (no intervention). [ABSTRACT FROM AUTHOR]

As rooftop solar PVs installed by residential customers penetrate in low voltage distribution network (LVDN), some issues, e.g. over/under voltage and unbalances, which may undermine the network's operational performance, need to be adequately addressed. To mitigate unbalances in LVDN, phase-switching devices (PSDs) and static var compensator (SVC) are two equipment that is cost-effective and efficient. However, most existing research on operating PSDs is based on inflexible heuristic algorithms or without considering the network formulation, which may lead to strategies that violate operational requirements. Moreover, few pieces of literature have been reported on mitigating unbalances in LVDN via SVC and PSDs together. This paper formulates the decision-making process as a mixed-integer non-convex programming (MINCP) problem after developing an SVC model for dispatch purpose. Compared with existing work, the proposed method aims at minimizing current unbalance based on their phasor values and takes the network's operational requirements into account. To efficiently solve the challenging problem, the MINCP is reformulated as a mixed-integer second order-cone programming (MISOCP) problem based on either exact reformulations or accurate approximations, making it possible to employ efficient off-the-shelf solvers. Simulations based on two modified IEEE systems and a practical Australian LVDN demonstrates the efficiency of the proposed method in mitigating unbalances in LVDN. [ABSTRACT FROM AUTHOR]

This paper proposes a novel graph-based approach with automorphic grouping for the modelling, synthesis, and analysis of electric vehicle (EV) networks with charging stations (CSs) that considers the impacts of traffic. The EV charge demands are modeled by a graph where nodes are positioned at potential locations for CSs, and edges represent traffic flow between the nodes. A synchronization protocol is assumed for the network where the system states correspond to the waiting time at each node. These models are then utilized for the placement and sizing of CSs in order to limit vehicle waiting times at all stations below a desirable threshold level. The main idea is to reformulate the CS placement and sizing problems in a control framework. Moreover, a strategy for the deployment of portable charging stations (PCSs) in selected areas is introduced to further improve the quality of solutions by reducing the overshooting of waiting times during peak traffic hours. Further, the inherent symmetry of the graph, described by graph automorphisms, are leveraged to investigate the number and positions of CSs. Detailed simulations are performed for the EV network of Perth Metropolitan in Western Australia to verify the effectiveness of the proposed approach. [ABSTRACT FROM AUTHOR]

Appliance-level load models are expected to be crucial to future smart grid applications. Unlike direct appliance monitoring approaches, it is more flexible and convenient to mine smart meter data to generate load models at device level nonintrusively and generalise to all households with smart meter ownership. This paper proposes a comprehensive and extensible framework to solve the load disaggregation problem for residential households. Our approach examines both the modelling of home appliances as hidden Markov models and the solving of non-intrusive load monitoring based on segmented integer quadratic constraint programming to disaggregate a household power profile into the appliance level. Structure of our approach to be implemented with current smart meter infrastructure is given and simulations are performed based on public datasets. All data are down-sampled to the rate that is consistent with the Australia smart meter infrastructure minimum functionality. The results demonstrate that our approach is able to work with existing smart meters to generate device level load model for other smart grid research and applications. [ABSTRACT FROM AUTHOR]

Energy storage systems have the potential to deliver value in multiple ways, and these must be traded off against one another. An operational strategy that aims to maximize the returned value of such a system can often be significantly improved with the use of forecasting—of demand, generation, and pricing—but consideration of battery degradation is important too. This paper proposes a stochastic dynamic programming approach to optimally operate an energy storage system across a receding horizon. The method operates an energy storage asset to deliver maximal lifetime value, by using available forecasts and by applying a multi-factor battery degradation model that takes into account operational impacts on system degradation. Applying the method to a dataset of a residential Australian customer base demonstrates that an optimally operated system returns a lifetime value which is 160% more, on average, than that of the same system operated using a set-point-based method applied in many settings today. [ABSTRACT FROM PUBLISHER]

Given a set of facilities and a set of users, a reverse nearest neighbors (RNN) query retrieves every user $u$ for which the query facility $q$ is its closest facility. Since $q$ is the closest facility to $u$ , the user $u$ is said to be influenced by $q$ . In this paper, we propose a relaxed definition of influence where a user $u$ is said to be influenced by not only its closest facility but also every other facility that is almost as close to $u$ as its closest facility is. Based on this definition of influence, we propose reverse approximate nearest neighbors (RANN) queries. Formally, given a value $x>1$ , an RANN query $q$ returns every user $u$ for which $dist(u,q) \leq x\times NNDist(u)$ where $NNDist(u)$ denotes the distance between a user $u$ and its nearest facility, i.e., $q$ is an approximate nearest neighbor of $u$ . In this paper, we study both snapshot and continuous versions of RANN queries. In a snapshot RANN query, the underlying data sets do not change and the results of a query are to be computed only once. In the continuous version, the users continuously change their locations and the results of RANN queries are to be continuously monitored. Based on effective pruning techniques and several non-trivial observations, we propose efficient RANN query processing algorithms for both the snapshot and continuous RANN queries. We conduct extensive experiments on both real and synthetic data sets and demonstrate that our algorithm for both snapshot and continuous queries are significantly better than the competitors. [ABSTRACT FROM PUBLISHER]

In this paper, we investigate the design and analysis of coded slotted ALOHA (CSA) schemes in the presence of channel erasure. We design the code probability distributions for CSA schemes with repetition codes and maximum distance separable codes to maximize the expected traffic load, under both packet erasure channels and slot erasure channels. We derive the extrinsic information transfer (EXIT) functions of CSA schemes over erasure channels. By optimizing the convergence behavior of the derived EXIT functions, the code probability distributions to achieve the maximum expected traffic load are obtained. Then, we derive the asymptotic throughput of CSA schemes over erasure channels. In addition, we validate that the asymptotic throughput can give a good approximation to the throughput of CSA schemes over erasure channels. [ABSTRACT FROM AUTHOR]

This paper addresses the problem of online tracking and classification of multiple objects in an image sequence. Our proposed solution is to first track all objects in the scene without relying on object-specific prior knowledge, which in other systems can take the form of hand-crafted features or user-based track initialization. We then classify the tracked objects with a fast-learning image classifier, that is based on a shallow convolutional neural network architecture and demonstrate that object recognition improves when this is combined with object state information from the tracking algorithm. We argue that by transferring the use of prior knowledge from the detection and tracking stages to the classification stage, we can design a robust, general purpose object recognition system with the ability to detect and track a variety of object types. We describe our biologically inspired implementation, which adaptively learns the shape and motion of tracked objects, and apply it to the Neovision2 Tower benchmark data set, which contains multiple object types. An experimental evaluation demonstrates that our approach is competitive with the state-of-the-art video object recognition systems that do make use of object-specific prior knowledge in detection and tracking, while providing additional practical advantages by virtue of its generality. [ABSTRACT FROM PUBLISHER]

Convolutional neural networks (CNNs) have gained significant popularity in orthopedic imaging in recent years due to their ability to solve fracture classification problems. A common criticism of CNNs is their opaque learning and reasoning process, making it difficult to trust machine diagnosis and the subsequent adoption of such algorithms in clinical setting. This is especially true when the CNN is trained with limited amount of medical data, which is a common issue as curating sufficiently large amount of annotated medical imaging data is a long and costly process. While interest has been devoted to explaining CNN learnt knowledge by visualizing network attention, the utilization of the visualized attention to improve network learning has been rarely investigated. This paper explores the effectiveness of regularizing CNN network with human-provided attention guidance on where in the image the network should look for answering clues. On two orthopedics radiographic fracture classification datasets, through extensive experiments we demonstrate that explicit human-guided attention indeed can direct correct network attention and consequently significantly improve classification performance. The development code for the proposed attention guidance is publicly available on https://github.com/zhibinliao89/fracture_attention_guidance. [ABSTRACT FROM AUTHOR]

Person re-identification (re-ID) is of great importance to video surveillance systems by estimating the similarity between a pair of cross-camera person shorts. Current methods for estimating such similarity require a large number of labeled samples for supervised training. In this paper, we present a pseudo-pair based self-similarity learning approach for unsupervised person re-ID without human annotations. Unlike conventional unsupervised re-ID methods that use pseudo labels based on global clustering, we construct patch surrogate classes as initial supervision, and propose to assign pseudo labels to images through the pairwise gradient-guided similarity separation. This can cluster images in pseudo pairs, and the pseudos can be updated during training. Based on pseudo pairs, we propose to improve the generalization of similarity function via a novel self-similarity learning:it learns local discriminative features from individual images via intra-similarity, and discovers the patch correspondence across images via inter-similarity. The intra-similarity learning is based on channel attention to detect diverse local features from an image. The inter-similarity learning employs a deformable convolution with a non-local block to align patches for cross-image similarity. Experimental results on several re-ID benchmark datasets demonstrate the superiority of the proposed method over the state-of-the-arts. [ABSTRACT FROM AUTHOR]