Search

The heterocharge accumulated in the oil‐paper insulation system of the converter transformer will enhance the local electric field and cause insulation deterioration. Numerical simulation is an effective method to analyze heterocharge. Currently, the numerical simulation of heterocharge is mainly based on the bipolar charge transport (BCT) model and the impurity ion transport (IIT) model. However, the effects of temperature, conductivity, and thickness of oil‐impregnated paper on charge transport have not been considered in these models. In view of this, a modified charge transport (MCT) model by introducing the Maxwell–Wagner model and heat conduction equation is proposed in this paper based on the BCT model and IIT model. Then, the influence of multi‐factors (temperature gradient, moisture content, and oil‐impregnated paper thickness) on heterocharge accumulation is investigated by using the MCT model. The simulation results obtained by the MCT model are more consistent with the experimental results than the BCT model, which proves the accuracy and superiority of the MCT model. Moreover, the increase in temperature gradient, moisture content, and oil‐impregnated paper thickness will enlarge the ion dissociation rate, conductivity, and trap density, and thus promote the generation of heterocharge. In that respect, the MCT model is expected to optimize the insulation design and provide a reference for space charge dynamic simulation. [ABSTRACT FROM AUTHOR]

The accuracy and feasibility of the traditional XY model of transformer oil–paper insulation system are disputable since it ignored the effect of non‐uniform aging and conductance on dielectric response property. Given this issue, this work attempted to report a modified XY model to overcome these defects. The novelty of this work is in the exploration of the modified XY model as a potential tool for establishing the quantitative correlation among the complex relative permittivity of the liquid insulation, solid insulation, and liquid–solid composite insulation. In that respect, the presented verification experiments proved the feasibility and accuracy of the reported model. The contributions are expected to provide a theoretical basis for the condition evaluation of transformer solid insulation under non‐uniform aging conditions. [ABSTRACT FROM AUTHOR]

The ageing rate of cellulose insulation materials (paper/pressboard) in oil‐impregnated transformers is largely determined by moisture. In this paper, several experiments were conducted under controlled laboratory conditions to quantitatively diagnose the amount of moisture in cellulose insulation using frequency domain spectroscopy (FDS) technique, which has been proven to be an effective tool to predict the insulation condition in oil‐impregnated power equipment. The frequency dielectric response in oil‐impregnated pressboards, moisture content as well as test temperature, was monitored carefully, and a new dielectric characteristic parameter for the diagnosis of moisture content was proposed. In addition, the master curve technique was introduced to calibrate the temperature effect on FDS measurement results. These experiments revealed that a strong correlation exists between frequency dielectric parameter and moisture content in cellulose insulation. Such correlation can be utilised for better prediction of moisture content in paper–oil insulation. A modified assessment method for the diagnosis of moisture content in paper–oil insulation was investigated and its effectiveness was also demonstrated using a case. [ABSTRACT FROM AUTHOR]

In recent years, MXene has become a hotspot because of its good conductivity, strong broadband absorption, and tunable band gap. In this contribution, 0D MXene Ti3C2Tx quantum dots are synthesized by a liquid exfoliation method and a wideband nonlinear optical response from 800 to 1550 nm is studied, which have a larger nonlinear absorption coefficient β of –(11.24 ± 0.14) × 10–2 cm GW–1. The carrier dynamic processes of 0D MXene are explored with ultrahigh time resolution nondegenerate transient absorption (TA) spectroscopy, which indicates that the TA signal reaches its maximum in 1.28 ps. Furthermore, 0D MXene is used to generate ultrashort pulses in erbium or ytterbium‐doped fiber laser cavity. High signal‐to‐noise (72 dB) femtosecond lasers with pulse durations as short as 170 fs with spectrum bandwidth of 14.8 nm are obtained. Finally, an ultranarrow fiber laser based on 0D MXene is also investigated and has a full width at half maximum of only 5 kHz, and the power fluctuation is less than 0.75% of the average power. The experimental works prove that 0D MXene is an excellent SA and has a promising application in ultrafast and ultranarrow photonics. [ABSTRACT FROM AUTHOR]