Search

This paper analyses the conference papers published by double first‐class universities from mainland China between 2006 and 2019. The main findings are as follows: first, the number of conference papers from different double first‐class universities varied greatly, with the annual numbers of papers in the China Proceedings of Conferences Full‐text Database (CPCD) and in the Conference Proceedings Citation Index (CPCI) fluctuating during this period. Second, most of the top 10 disciplines of the papers in the CPCD and CPCI were in the natural sciences, with only two in the social sciences. The CPCD papers and CPCI papers had some overlap in their disciplinary distributions. Third, the CPCD and CPCI papers differed little in total number, with the number of CPCI papers being slightly higher than the number of CPCD papers. With the introduction of new regulations from the Ministry of Science and Technology (MST), there will likely be an increase in the number of Chinese‐language conference papers in the future. [ABSTRACT FROM AUTHOR]

Natural and synthetic esters are increasingly being chosen instead of mineral oil for environmental and fire safety reasons. However, their use in power transformers is limited due to insufficiently well-understood ageing processes affecting their properties and the properties of cellulosic materials impregnated with them. The research results presented in many scientific papers prove that the use of esters slows the ageing process of cellulosic materials. This article presents the results of research aimed at answering the question of whether the effect of slowing the ageing process will also occur in the case of insulation with very low initial moisture. The answer to this question will allow us to better understand the role of water in the ageing process of the transformer's insulation system. The thermal ageing process was carried out at a temperature of 150 °C in closed systems. The degree of cellulose polymerisation was taken as a measure of the degree of paper ageing. Great attention was paid to measuring the water content in both paper and electro-insulating liquids at various stages of their ageing. Furthermore, measurements of the properties of electro-insulating liquids were made, which are considered markers of ageing. The test results obtained indicate that in the case of a dry insulation system, corresponding to the initial moisture of the new units, the type of liquid used to impregnate the cellulosic material does not significantly affect its depolymerisation process. However, in the case of paper impregnated with natural esters, a lower dynamic of moisture increase in insulation was observed. [ABSTRACT FROM AUTHOR]

Objective: to analyse the artistic bindings of the eighteenth-century prints stored in the Historical-artistic Binding Database of the Royal Library, in order to locate the endpapers made with decorated papers, and to classify and describe them according to the proposals of the specialist literature. Methodology: The records from the database were retrieved using the "date" field, and the information is extracted from the "endpapers" and "notes" fields. The reproductions of the endpapers were analysed, identified and described following the classification model of decorated papers inspired by the works of Professor Carpallo Bautista, consisting of five techniques and their variants. Finally, a comparative analysis was carried out. Results: Among the 382 eighteenth-century prints with artistic bindings, ten were located and analysed that include endpapers decorated with xylographic plates, 135 with marbled or mottled papers (with designs corresponding to seven variants), four with paste-glued papers, three with dotted papers, 18 with gold and embossed papers, and four of other kinds such as silver or percaline paper. [ABSTRACT FROM AUTHOR]

A new coating method was developed, based on cellulose regenerated from an N-methylmorpholine N-oxide (NMMO) solution applied to paper. In particular, the purpose of this study was to compare the effectiveness of the "deep coating" method using cellulose regenerated from NMMO solution and the classic pulp refining process as methods to improve paper mechanical properties and overall quality. The "deep coating" name comes from the fact that the coating process is combined with subsequent heating of the coating before its final solidification. As a result of this operation, deep penetration of the cellulosic solution into the paper structure occurs. This increases the contact surface of the solution with the cellulosic fibers, which increases the strength properties of the paper structure. It was found that the cellulosic coating increased the apparent density of the paper, the tensile strength, the elongation, the resistance to bursting, and the double fold number. However, the coating also decreased the air permeability and the tear resistance of the paper samples. Despite some technological difficulties, this method could be an attractive solution in the case of a need for additional functionalization of a paper structure. [ABSTRACT FROM AUTHOR]

Objective: To assess differences between traditional paper bag ordering and online ordering from primary school canteens in terms of menu, usage and lunch order characteristics.Design: A cross-sectional study.Setting: New South Wales (NSW) primary schools that offered both paper bag and online canteen ordering.Participants: Students (aged 5-12 years) with a lunch order on the day of the observation.Results: Across the six school canteens, 59-90 % of all available items were listed on both the online and paper menus, with no significant differences in the nutritional quality ('Everyday'/'Occasional') or nutritional content (kJ/saturated fat/sugar/sodium) of menu items. In total, 387 student lunch orders were placed, containing 776 menu items. Most orders (68 %) were placed online. There were no significant differences between order modality in the quantity of items ordered or the cost of orders, or the nutritional quality of orders based on the classification system of the NSW Healthy School Canteen Strategy ('Everyday'/'Occasional'). However, nutritional analysis revealed that paper bag orders contained 222 fewer kJ than online orders (P = 0·001), 0·65 g less saturated fat (P = 0·04) and 4·7 g less sugar (P < 0·001).Conclusions: Online canteens are commonly used to order canteen lunches for primary school children. This is the first study to investigate differences between traditional paper bag ordering and online ordering in this setting. Given the rapid increase in the use of online ordering systems in schools and other food settings and their potential to deliver public health nutrition interventions, additional research is warranted to further investigate differences in ordering modalities. [ABSTRACT FROM AUTHOR]

Simple Summary: Blood clots are formed when blood vessels are injured. They help stop bleeding and heal wounds, but can also cause serious problems if they block blood flow or break off and travel to other organs. This study investigates how blood clots differ in people with cancer compared to healthy or non-cancerous individuals. This study found that cancer patients have higher levels of histones in their blood, which make their clots stiffer and resistant to lysis. Further, clots formed in cancer patients have higher viscoelastic properties, and hence are harder to break down. These findings suggest that cancer patients have abnormal clotting properties that may increase their risk of developing thrombosis, and evaluating these properties can be helpful in detecting cancer. Background: Blood viscoelasticity and plasma protein levels can play an important role in the diagnosis and prognosis of cancer. However, the role of histones and DNA in modulating blood clot properties remains to be investigated. This study investigates the differences in blood viscoelasticity and plasma protein levels among cancer patients, individuals with other diseases, and healthy individuals. Methods: Blood samples were collected from 101 participants, including 45 cancer patients, 22 healthy individuals, and 34 individuals with other diseases. Rheological properties of clots formed in vitro by reconstituted elements of fibrinogen or plasma were analyzed with an Anton Paar Rheometer, USA. Plasma protein levels of D-dimer, TPA, EPCR, fibrinogen, and histone H3 were measured through ELISA. Blood clots were formed with or without DNA and histones (H3) by adding thrombin and calcium to plasma samples, and were evaluated for viscoelasticity, permeability, and degradation. Results: Cancer patients show higher blood viscoelasticity and plasma D-dimer levels compared to healthy individuals and individuals with other diseases. Our in vitro analysis showed that the addition of histone to the plasma results in a significant decrease in viscoelasticity and mean fiber thickness of the clot formed thereafter. In parallel studies, using plasma from patients, DNA and histones were detected in fibrin clots and were associated with less degradation by t-PA. Moreover, our results show that the presence of DNA and histones not only increases clots' permeability, but also makes them more prone to degradation. Conclusions: Plasma histones and DNA affect the structure of the clot formed and induce defective fibrinolysis. Moreover, the increased viscoelastic properties of plasma from cancer patients can be used as potential biomarkers in cancer prognosis. [ABSTRACT FROM AUTHOR]

The introduction of mobile devices such as smartphones provides new opportunities to enhance the teaching–learning process of a foreign language. However, its use can affect not only the students' type and form of writing but also their ability to achieve the academic competencies targeted. Thus, aspects such as the development of linguistic and communicative competencies could be affected. In this paper, a comparative analysis of two different versions (a paper and a digital version) of the same learning task is carried out in order to analyze the impact of each on the development of students' linguistic and communicative competencies. The study is conducted with undergraduate students enrolled in a course called German II. Modern Language I (level A1.2, Common European Framework of Reference for Languages). The results obtained illustrate, on the one hand, the advantages of the paper version for developing students' linguistic competence and, on the other hand, that the digital version, despite facilitating students' interaction amongst each other, does not seem to be more suitable for developing students' communicative competence. Future studies will, therefore, focus on identifying those features that might increase the potential of the digital version for fostering the targeted competencies. [ABSTRACT FROM AUTHOR]

Alkyl ketene dimer (AKD) and rosin sizing are used in papermaking to decrease paper's tendency to absorb liquid water. Earlier information regarding the effects of internal sizing on paper dry strength is not consistent. In the present laboratory study, AKD sizing of handsheets made from Nordic bleached softwood pulp (NBSK), and rosin sizing of handsheets made from Nordic hardwood chemi-thermomechanical pulp (CTMP) were done via an internal sizing method, and by immersing handsheets in aqueous sizing agent dispersion. In the study, AKD sizing had no significant effect on the dry strength of NBSK handsheets. The result corresponds to practical experiences of papermakers. However, both AKD sizing methods resulted in a substantial and long-lasting increase of handsheet wet-strength. Unlike internal AKD sizing of NBSK handsheets, rosin internal sizing of CTMP handsheets resulted in decreased handsheet dry strength. The decrease indicates that, under the conditions present during the experiment, rosin sizing agents interfered with interfiber hydrogen bonding of CTMP fibers. Given that, in practice, no such undesired effects have been commonly linked to rosin sizing, the observed effect may be specific to sheet-making conditions. However, the effect of rosin sizing on strength properties and their variation cannot be ruled out completely. [ABSTRACT FROM AUTHOR]

In people with bone and soft tissue injuries of the wrist, hand and/or fingers, do feedback-guided exercises performed on a tablet touchscreen hasten return to work, reduce healthcare usage and improve clinical recovery more than a home exercise program prescribed on paper? Randomised, parallel-group trial with concealed allocation, assessor blinding and intention-to-treat analysis. Seventy-four workers with limited functional ability due to bone and soft tissue injuries of the wrist, hand and/or fingers. Participants in the experimental and control groups received the same in-patient physiotherapy and occupational therapy. Participants in the experimental group received a home exercise program using the ReHand tablet application, which guides exercises performed on a tablet touchscreen with feedback, monitoring and progression. Participants in the control group were prescribed an evidence-based home exercise program on paper. The primary outcome was the time taken to return to work. Secondary outcomes included: healthcare usage (number of clinical appointments); and functional ability, pain intensity, and grip and pinch strength 2 and 4 weeks after randomisation. Compared with the control group, the experimental group: returned to work sooner (MD –18 days, 95% CI –33 to –3); required fewer physiotherapy sessions (MD –7.4, 95% CI –13.1 to –1.6), rehabilitation consultations (MD –1.9, 95% CI –3.6 to 0.3) and plastic surgery consultations (MD –3.6, 95% CI –6.3 to –0.9); and had better short-term recovery of functional ability and pinch strength. In people with bone and soft-tissue injuries of the wrist, hand and/or fingers, prescribing a feedback-guided home exercise program using a tablet-based application instead of a conventional program on paper hastened return to work and improved the short-term recovery of functional ability and pinch strength, while reducing the number of required healthcare appointments. ACTRN12619000344190 [ABSTRACT FROM AUTHOR]

The SIR Iber highlights the geographical location of Ibero-American universities by positioning them according to the indicators grouped into three main factors: research, innovation and social impact. The 2020 edition highlights the formation of three groups of countries according to the production capacity of higher education institutions. In group 1 we have: Brazil, Mexico, Chile, Argentina, and Colombia as Latin American countries that managed to publish more than 60,000 papers in the period 2014-2018. This paper analyzes and compares the indicators from the five (05) Latin American countries in group 1 of the SIR Iber 2020 referring to investment in I+S as a percentage of its Gross Domestic Product (PIB), the number of full-time equivalent researchers (Inv JCE), the production (%) of scientific works in the university education sector, to name a few. A conglomerate formed with the Normalized Impact (NI) of public and private IESs is presented, regarding the global average of citation, with the data published in the SIR IBER 2020 Report, and highlights that Chile has a normalized impact above the World average for both public and private IES publications. [ABSTRACT FROM AUTHOR]

This study attempts to examine the differences in consumers' perceptions between paper and mobile coupons. It discovers new potentials of mobile coupons by investigating whether coupon type (mobile vs. paper) has any impact on a consumer's coupon usage intention. It explores the drivers and barriers of consumers' coupon usage intention and also examines to which extent coupon type translates into higher usage intention rates. The data of this study were analyzed with exploratory factor analysis, ttest, and multiple regression analysis. This study revealed that when the coupon type changes from paper to mobile, people's coupon intention to use decreases, with the lack of trust as the primary barrier. The current study is the first attempt to apply this transactional utility theory to compare consumers' perceptions between mobile and paper coupons. This study has empowered the transactional utility theory by applying it in a new domain of couponing. [ABSTRACT FROM AUTHOR]

Objectives. To evaluate the usefulness of a novel acoustic uroflowmetry- (UFM-) based mobile application (app) voiding diary (VD) focusing on the (1) compliance and (2) correlation with a conventional paper-based VD. Materials and Methods. A total of 78 patients were included between December 2019 and June 2020, and a subsequent review of all data was performed. The analyzed data were as follows: (1) survey of convenience/satisfaction/preference comparing the two methods, (2) compliance regarding the completeness of both methods, and (3) correlation of each metric (24-hour urine volume, nocturnal urine volume, nocturnal polyuria index, total number of voids, number of daytime voids, number of nocturnal voids, and maximal bladder capacity) between the two methods. Results. The survey results of convenience, satisfaction, and preference were as follows. With regard to convenience and satisfaction area, higher scores are reported in the mobile app VD (mean ± standard deviation (SD); convenience: 7.47 ± 2.19 [app] vs. 4.20 ± 2.49 [paper]; satisfaction: 7.36 ± 2.17 [app] vs. 5.07 ± 2.65 [paper]). The median score of the overall preference for using the mobile app instead of the paper-based VD was 9 out of 10 (mean ± SD 7.82 ± 2.68). We also found a good correlation between the two methods for nocturnal urine volume (r = 0.55 , p = 0.04), nocturnal polyuria index (r = 0.66 , p = 0.23), total number of voids (r = 0.9 , p = 0.02), number of nocturnal voids (r = 0.83 , p = 0.02), and maximal bladder capacity (r = 0.89 , p = 0.04). Conclusion. The acoustic UFM-based mobile app VD demonstrated favorable findings compared to the conventional paper-based VD. [ABSTRACT FROM AUTHOR]

Environmental and economic concerns are driving tissue paper manufacturers to improve understanding of the relationships between fibres, the networks they form, the forming process, and the final tissue paper properties. This work investigated how pulp fractionation, refining, or addition of microfibrillated cellulose (MFC) affect the compromise between absorbency and strength of 33 ± 2 g/m² model papers made of bleached eucalyptus kraft pulp. The results showed that the compromise of properties was better when fibres were refined than when MFC was added. The absorbency capacity of 2%wt MFC-paper was almost 20% lower than the capacity of the refined paper at the same dry strength. The calculated additional storage capacity due to water-induced deformations of the fibre network was 40% lower in the same range of bulk. By forming a high viscosity gel at inter-fibre contacts, MFC could limit the occurrence of major fibre and network deformation mechanisms when water was imbibing the paper. [ABSTRACT FROM AUTHOR]

The article discusses the positive pain reduction outcomes of a personalized care pathway for chronic knee pain post-total knee replacement.

When writing a research paper, significant effort is spent comparing the current work to other related studies. In general, these comparisons comprise the 'Related Work' section of the paper, with the relevant reference papers cited and analyzed. An automatic method for gathering and managing information about other researchers' reviews of reference papers would reduce the time and effort needed for such comparisons. Thus, in this paper, we propose a crawler that gathers the comments made by other researchers on the papers that are cited in the 'Related Work' section and listed in the 'Bibliography' or 'References' section of a research paper. The Reference Comments Crawler (RCC) system collects the text pertaining to the reference papers, providing useful information to researchers by extracting relevant data from the comments. The RCC considers different types of reference identifiers and the comment sentences are extracted based on these reference identifiers and user-defined extraction rule. Also, the RCC system extracts and provides the previous and subsequent sentences, labeled as PreSentences and PostSentences, as well as the comment sentences including the reference identifier. A series of experiments were performed to evaluate precision and recall, and the results showed that the RCC system can provide useful information with a high degree of precision and recall to the user. Furthermore, through these experiments, our system can assist researchers by reducing the time and effort spent comparing and analyzing related work. [ABSTRACT FROM AUTHOR]

Score equivalency of two Computer-Based Testing (henceforth CBT) and Paper-and-Pencil-Based Testing (henceforth PBT) versions has turned into a controversial issue during the last decade in Iran. The comparability of mean scores obtained from two CBT and PBT formats of test should be investigated to see if test takers' testing performance is influenced by the effects of testing administration mode. This research was conducted to examine score equivalency across modes as well as the relationship of gender, and testing mode preference with test takers' performance on computerized testing. The information on testing mode preference and attitudes towards CBT and its features was supported by a focus group interview. Findings indicated that the scores of test takers were not different in both modes and there was no statistically significant relationship between moderator above variables and CBT performance. [ABSTRACT FROM AUTHOR]

• The use of the ProFibro app for six weeks was not more effective than the use of a traditional paper book with similar content for health-related quality of life, symptoms, or self-care agency in individuals with fibromyalgia. • Improvements on severity of symptoms in both groups suggest that the self-care program using a mobile app or a paper book may be beneficial in individuals with fibromyalgia. • The Sleep Strategies was the most used function of the ProFibro app, followed by the Exercise Program, and the diary for the practice of gratitude. The ProFibro application (app) was developed as a Mobile Health resource to promote self-care in fibromyalgia management. This study aimed to assess the effects of the use of the ProFibro app for six weeks compared to the use of a traditional paper book of similar content to improve health-related quality of life, symptoms, and self-care agency in individuals with fibromyalgia. Forty individuals with fibromyalgia were included in this randomized, single-blind, parallel trial. One group received intervention content using the ProFibro app on a smartphone while the other received similar information using a paper book. Participants were assessed at baseline and after six weeks. The primary outcome was the Revised Fibromyalgia Impact Questionnaire. Secondary outcomes were Widespread Pain Index, Pain Visual Analog Scale, Symptom Severity Scale, and Appraisal of Self-Care Agency Scale – Revised. No differences in changes were found between groups at the end of the treatment for any outcome. Both groups showed improvements in symptom severity. The use of the ProFibro app for six weeks was not more effective than the use of a traditional paper book with similar content for health-related quality of life, symptoms, or self-care agency in individuals with fibromyalgia. Both groups showed improvements from baseline on severity of symptoms, suggesting that the self-care program using a mobile app or a paper book may be beneficial for individuals with fibromyalgia. [ABSTRACT FROM AUTHOR]

The major focus of school education is the intellectual development of students and mathematics is a very effective subject in this regard, if taught and assessed properly. For this study, papers of SSC (Grade-10) for the years 2014 and 2015 set by the Board of Secondary Education, Karachi were scrutinized to know if the items of these papers had measured essential mathematical skills or not. These items were then compared with the items set by General Certificate of Education (GCE: O-Level), University of Cambridge Local Examinations Syndicate (UCLES) for mathematics papers, serving as a benchmark for this study to highlight the shortcomings. The results revealed that the items of SSC papers were highly biased towards 'Factual Knowledge' and 'Routine Procedures'. The study concluded that these items assess knowledge of facts and algorithms only and do not measure essential mathematical skills (involvement of higher levels of thinking processes) of students. The study recommends to improve the items of papers so that essential mathematical skills can be measured rather than the capacity of memorization because with this practice, thinking habits cannot be inculcated among students. [ABSTRACT FROM AUTHOR]

Cationized birch xylan was prepared and its use as a papermaking chemical was evaluated. The focus was on studying the effects of cationized birch xylan on the wet and dry strength of fine paper. The results of the laboratory experiments show that the addition of 3 percent of cationized birch xylan to birch kraft pulp improved the initial wet strength of the web by 30 percent compared to base stock at a solids content of 55%. Furthermore, the tensile stiffness of the wet web increased by approximately a third and the dry tensile strength improved by 26%, while the dry elastic modulus was not changed. The improvements in the strength properties were clear when compared to the base stock, but not as high as achieved with conventionally used cationized starch. The difference between the xylan and starch is most likely due to the shorter polymer chain length of the cationized xylan. [ABSTRACT FROM AUTHOR]

Recycled paper is extensively used worldwide. In the last decades, its market has expanded considerably. The increasing use of recycled paper in papermaking has led to the production of paper containing several types of impurities. Consequently, wastepaper mills are forced to implement quality control schemes for evaluating the incoming wastepaper stock, thus guarantying the specifications of the final product. The main objective of this work is to present a fast and reliable system for identifying different paper types. Therefore, undesirable paper types can be refused, improving the performance of the paper machine and the final quality of the paper manufactured. For this purpose, two fast techniques, i.e., Fourier transform midinfrared (FTIR) and reflectance near infrared (NIR), were applied to acquire the infrared spectra of the paper samples. Next, four processing multivariate methods, i.e., principal component analysis, canonical variate analysis (CVA), extended CVA (ECVA), and support vector machines (SVMs), were employed in the feature-extraction or dimension-reduction stage. Afterward, the k nearest neighbor (kNN) algorithm was used in the classification phase. Experimental results show the usefulness of the proposed methodology and the potential of both FTIR and NIR spectroscopic methods. Using the FTIR spectrum in association with SVM and kNN, the system achieved a maximum classification accuracy of 100%, whereas using the NIR spectrum in association with ECVA or SVM and kNN, the system achieved a maximum classification accuracy of 96.4%. [ABSTRACT FROM PUBLISHER]

This paper reports on a study evaluating the value of a documentary as a key medium to communicate design research. We present information from the evaluation of a second screen application using video as well as a scientific paper, in order to assess how the efficacy and usefulness of using such a documentary for science communication is perceived when compared to a scientific paper. Techniques of a method called Design Documentary , developed to inspire design research teams through video, combined with science journalism were the basis of the production. Twelve researchers and students were shown the documentary and asked to read the paper in counter-balanced order. Our qualitative results show that the documentary as a complementary means of communication can bring benefits to research communication, since it delivers information the paper cannot provide. However, the fact the video is not suited for peer review might restrict its place when compared to the paper. On the overall, participants thought both formats are valuable and are complementary. [ABSTRACT FROM AUTHOR]

Microbial communities play a vital role in maintaining soil health. A multiphasic approach to assess the effect of pulp and paper mill effluent on both the structure and function of microbial soil communities is taken. Bacterial communities from agricultural soils irrigated with pulp and paper mill effluent were compared to communities form soils irrigated with well water. Samples were taken from fields in the state of Uttarakhand, India, where pulp and paper mill effluent has been used for irrigation for over 25 years. Comparisons of bacterial community structure were conducted using sequencing of the 16S rRNA gene from both isolates and clone libraries attained from the soil. Community-level physiological profiling was used to characterize the functional diversity and catabolic profile of the bacterial communities. The multiphasic approach using both physiological and molecular techniques proved to be a powerful tool in evaluating the soil bacterial community population and population differences therein. A significant and consistent difference in the population structure and function was found for the bacterial communities from soil irrigated with effluent in comparison to fields irrigated with well water. The diversity index parameters indicated that the microbial community in pulp and paper mill effluent irrigated fields were more diverse in both structure and function. This suggests that the pulp and paper mill effluent is not having a negative effect on the soil microbial community, but in fact may have a positive influence. In terms of soil health, this finding supports the continued use of pulp and paper mill effluent for irrigation. This is however only one aspect of soil health which was evaluated. Further studies on soil resistance and robustness could be undertaken to holistically evaluate soil health in this situation. [ABSTRACT FROM AUTHOR]

Donor human milk (DHM) from a milk bank is the recommended feeding method for preterm infants when the mother's own milk (MOM) is not available. Despite this recommendation, information on the possible contamination of donor human milk and its impact on infant health outcomes is poorly characterised. The aim of this systematic review is to assess contaminants present in DHM samples that preterm and critically ill infants consume. The data sources used include PubMed, EMBASE, CINAHL and Web of Science. A search of the data sources targeting DHM and its potential contaminants yielded 426 publications. Two reviewers (S. T. and D. L.) conducted title/abstract screening through Covidence software, and predetermined inclusion/exclusion criteria yielded 26 manuscripts. Contaminant types (bacterial, chemical, fungal, viral) and study details (e.g., type of bacteria identified, study setting) were extracted from each included study during full‐text review. Primary contaminants in donor human milk included bacterial species and environmental pollutants. We found that bacterial contaminants were identified in 100% of the papers in which bacterial contamination was sought (16 papers) and 61.5% of the full data set (26 papers), with the most frequently identified genera being Staphylococcus (e.g., Staphylococcus aureus and coagulase‐negative Staphylococcus) and Bacillus (e.g., Bacillus cereus). Chemical pollutants were discovered in 100% of the papers in which chemical contamination was sought (eight papers) and 30.8% of the full data set (26 papers). The most frequently identified chemical pollutants included perfluoroalkyl substances (six papers), toxic metal (one paper) and caffeine (one paper). Viral and fungal contamination were identified in one paper each. Our results highlight the importance of establishing standardisation in assessing DHM contamination and future studies are needed to clarify the impact of DHM contaminants on health outcomes. Key messages: Research regarding chemical contamination in donor human milk (DHM) is limited and needs to be studied further to draw appropriate conclusions on reducing potential risks for infants.Parents/guardians should be educated on the availability of DHM as a supplemental feeding option and made aware of the current research in the field.DHM use requires further standardisation both within the United States and abroad. This standardisation should ensure that risks are not overemphasised and DHM is a cost‐effective, accessible resource as a short‐term intervention when used appropriately as part of optimal lactation and breastfeeding support. [ABSTRACT FROM AUTHOR]

Background: Low- and middle-income countries (LMICs), including South Africa, are currently experiencing multiple epidemics: HIV and the rising burden of non-communicable diseases (NCDs), leading to different patterns of multimorbidity (the occurrence of two or more chronic conditions) than experienced in high income settings. These adversely affect health outcomes, increase patients' perceived burden of treatment, and impact the workload of self-management. This paper outlines the methods used in a qualitative study exploring burden of treatment among people living with HIV/NCD multimorbidity in South Africa. Methods: We undertook a comparative qualitative study to examine the interaction between individuals' treatment burden (self-management workload) and their capacity to take on this workload, using the dual lenses of Burden of Treatment Theory (BoTT) and Cumulative Complexity Model (CuCoM) to aid conceptualisation of the data. We interviewed 30 people with multimorbidity and 16 carers in rural Eastern Cape and urban Cape Town between February-April 2021. Data was analysed through framework analysis. Findings: This paper discusses the methodological procedures considered when conducting qualitative research among people with multimorbidity in low-income settings in South Africa. We highlight the decisions made when developing the research design, recruiting participants, and selecting field-sites. We also explore data analysis processes and reflect on the positionality of the research project and researchers. Conclusion: This paper illustrates the decision-making processes conducting this qualitative research and may be helpful in informing future research aiming to qualitatively investigate treatment burden among patients in LMICs. [ABSTRACT FROM AUTHOR]

Abstract: More than just being a substrate, paper can also provide evidence for the provenance of documents. An earlier paper described a method to compare paper structure, based on the Fourier power spectra of light transmission images. Good results were obtained by using the 2D correlation of images derived from the power spectra as a similarity score, but the method was very computationally intensive. Different comparison algorithms are evaluated in this paper, using information theoretical criteria. An angular invariant algorithm turned out to be as effective as the original one but 4 orders of magnitude faster, making the use of much larger databases possible. [Copyright &y& Elsevier]

The feasibility of the production of cellulose acetate (CA) from recycled paper dust from carton boxes was examined. Two pre-treatments were carried out on the carton box's paper dust (CPD) to improve the pulp properties for better effect of synthesis. The results showed that the acid and oxygen-alkaline pretreatments were capable of increasing the alpha-cellulose content from 80.5 percent to 87.3 percent and 85.3 percent, respectively. Both pre-treatments also decreased the hemicellulose and ash contents by more than 50 percent. The degree of substitution (DS) of the resultant CA from pre-treated paper dust was improved from 1.94 to 2.13-2.16. The CA that was synthesized from the recycled paper dust showed comparable DS and had a similar trend of Fourier Transform Infrared (FTIR) spectra. Both pretreated pulps also showed an increment in the degree of crystallinity and had maximum degradation effect of temperature when compared to CPD CA. However, all the cellulose acetates produced showed a lower DS and thermal stability compared to commercial cellulose acetate (C CA). The degree of crystallinity of all the cellulose acetate was decreased in comparison to the original material. [ABSTRACT FROM AUTHOR]

We conduct a comparative life cycle assessment of two business card options: a smartphone software and the common paper- based alternative. Life cycle impacts of production, distribution and use of business cards were compared and contrasted for both systems. Given the prevalence and multifunctionality of digital devices and services, we analyze the environmental impacts of the two systems and evaluate their total energy consumption, Greenhouse Gas (GHG) emissions and toxic releases by conducting a two-stage life cycle assessment with alternating functional units. The results indicate that, for a small-scale functional unit, the paper-based business card system causes slightly less environmental impact and has lower energy demand than the software-based (digital) business card system. Whereas when considering the more likely, large scale (real world scenario) functional unit, the digital business card system is more environmentally friendly and economical in terms of energy consumption. By comparing these two systems, this paper serves businesses and consumers when considering environmental consequences and energy depletion of their business networking options. [ABSTRACT FROM AUTHOR]

Graphs drawn on rastered paper and a monumental steel sculpture display how visual artists Paul Klee and Henrik Neugeboren conceived of Johann Sebastian Bach's polyphonic style in 1920s Germany. Focusing on the representational decisions behind these artistic translations of music, this article explores the ways in which such artifacts manifest a specific analytical lens. It highlights congruencies with and deviations from the theoretical framework of "linear counterpoint," as epitomized in Ernst Kurth's influential treatise from 1917, and thereby positions the artworks within the controversial reception history of Bach's music and atendant theoretical frameworks in the early twentieth century. More generally, the article proposes that graphical and sculptural renderings of music can offer the opportunity to investigate music theory's intangible methods and conceptual metaphors through different sensory experiences. [ABSTRACT FROM AUTHOR]

Some states in the U.S. have traditionally received less federal research funding than other states. The National Science Foundation (NSF) created a program in 1979, called the Experimental Program to Stimulate Competitive Research (EPSCoR) to enhance the research competitiveness in such states. While the geographic disparity in federal research funding is well known, the overall impact of federal funding on the research performance of EPSCoR and non-EPSCoR has not been previously studied. In the current study, we compared the combined research productivity of Ph.D. granting institutions in EPSCoR versus the non-EPSCoR states to better understand the scientific impact of federal investments in sponsored research across all states. The research outputs we measured included journal articles, books, conference papers, patents, and citation count in academic literature. Unsurprisingly, results indicated that the non-EPSCoR states received significantly more federal research funding than their EPSCoR counterparts, which correlated with a higher number of faculty members in the non-EPSCoR versus EPSCoR states. Also, in the overall research productivity expressed on a per capita, the non-EPSCoR states fared better than EPSCoR states. However, when the research output was measured based on per $1M investment of federal research funding, EPSCoR states performed significantly better than the non-EPSCoR states in many research productivity indicators, with the notable exception of patents. Together, this study found preliminary evidence that EPSCoR states achieved a high degree of research productivity despite receiving significantly fewer federal research dollars. The limitations and next steps of this study are also discussed. [ABSTRACT FROM AUTHOR]

Water is a prerequisite for the existence of life on earth. Rapid growth in the global population and industrialization have created a dearth of freshwater resources. Escalating water scarcity suggests that the use of passive solar stills is the most suitable and viable option in the arid and semi-arid areas around the world. In this study, the yield of wick type floating solar still is experimentally investigated for different wick materials. Capillary rise and absorbency of two different absorbers are considered as performance parameters for analysis of the research. Based on results, crepe paper with absorbency (1.8s) and capillary rise (112mm/h) proved a better absorber for higher productivity of the still. The efficiency of still with crepe paper was observed to be 16.68% higher than that of glass fiber sheet when applied in still during the investigation. The maximum internal temperature and the productivity of still were 9.1°C and 0.8 L/day respectively higher when crepe paper was used instead of a glass fiber sheet as a wicking material. [ABSTRACT FROM AUTHOR]

Two kinds of macromolecules applied in papermaking were modified with β -cyclodextrin (β -CD) and loaded with ciprofloxacin hydrochloride (CipHCl) in an attempt to compare their potential applications in antimicrobial paper. β -CD grafted cellulose (β -CD-Cel) and β -CD grafted cationic starch (β -CD-CS) were prepared by grafting β -CD onto cellulose fiber and cationic starch using citric acid (CA) and epichlorohydrin (ECH) as crosslinking agents, respectively. β -CD-Cel and β -CD-CS were both loaded with an antimicrobial agent (CipHCl) to form inclusion complexes, namely β -CD-Cel-CipHCl and β -CD-CS-CipHCl. Furthermore, the inclusion complexes were added to the pulp to prepare antibacterial paper. The antimicrobial activity and physical properties of the paper were investigated. The results showed that the paper with both inclusion complexes exhibited excellent antibacterial activity, and the antibacterial activity with β -CD-CS-CipHCl was higher than that with β -CD-Cel- CipHCl. Moreover, the addition of both β -CD-Cel-CipHCl and β -CD-CSCipHCl affected the tensile and tear strengths of the paper. The paper with β -CD-CS-CipHCl had better physical properties than that with β -CDCel- CipHCl because the CS acts as a reinforcing agent in papermaking. These prepared antibacterial paper sheets may be useful for preventing wound and nosocomial infections in the medical and packaging fields. [ABSTRACT FROM AUTHOR]

The genetics and evolution of complex traits, including quantitative traits and disease, have been hotly debated ever since Darwin. A century ago, a paper from R.A. Fisher reconciled Mendelian and biometrical genetics in a landmark contribution that is now accepted as the main foundation stone of the field of quantitative genetics. Here, we give our perspective on Fisher's 1918 paper in the context of how and why it is relevant in today's genome era. We mostly focus on human trait variation, in part because Fisher did so too, but the conclusions are general and extend to other natural populations, and to populations undergoing artificial selection. [ABSTRACT FROM AUTHOR]

Background: Previous research has found that a "web-push" approach to data collection, which involves contacting people by mail to request an Internet survey response while withholding a paper response option until later in the contact process, consistently achieves lower response rates than a "paper-only" approach, whereby all respondents are contacted and requested to respond by mail.Method: An experiment was designed, as part of the Millennium Cohort Family Study, to compare response rates, sample representativeness, and cost between a web-push and a paper-only approach; each approach comprised 3 stages of mail contacts. The invited sample (n = 4,935) consisted of spouses married to U.S. Service members, who had been serving in the military between 2 and 5 years as of October, 2011.Results: The web-push methodology produced a significantly higher response rate, 32.8% compared to 27.8%. Each of the 3 stages of postal contact significantly contributed to response for both treatments with 87.1% of the web-push responses received over the Internet. The per-respondent cost of the paper-only treatment was almost 40% higher than the web-push treatment group. Analyses revealed no meaningfully significant differences between treatment groups in representation.Conclusion: These results provide evidence that a web-push methodology is more effective and less expensive than a paper-only approach among young military spouses, perhaps due to their heavy reliance on the internet, and we suggest that this approach may be more effective with the general population as they become more uniformly internet savvy. [ABSTRACT FROM AUTHOR]

Abstract: A set of inks was analyzed using Py/GC/MS technique. They were prepared following some ancient Armenian recipes and then analyzed after being dried in air to obtain solid samples. A simple analytical procedure was adopted which excludes any treatment of the samples and consists in introducing the solid sample directly into the injector of the furnace pyrolyzer. Inks were also written on whatman paper by calamum and analyses of papers containing ink were carried out. A real sample analysis was reported. Comparing the pyrograms it was possible to discriminate fragments derived from ink, from that formed by the decomposition of paper by the influence of ink. In order to understand the origin of the fragments formed during the pyrolysis of inks the standard compounds used to prepare them were carried out, too. [Copyright &y& Elsevier]

Abstract: There are a number of issues which are involved with organizing a conference. Among these issues, assigning conference-papers to reviewers is one of the most difficult tasks. Assigning conference-papers to reviewers is automatically the most crucial part. In this paper, we address this issue of paper-to-reviewer assignment, and we propose a method to model the reviewers, based on the matching degree between the reviewers and the papers by combining a preference-based approach and a topic-based approach. We explain the assignment algorithm and show the evaluation results in comparison with the Hungarian algorithm. [Copyright &y& Elsevier]

Abstract: Patients with advanced-stage cancer often have a high symptom burden and reduced functional status, implying that the patients themselves should be involved in development and testing of interactive assessment tools. This paper reports on an assessment of use of a pain tool, which led to changes in both medium and program in order to adapt to the patients’ needs and abilities. Our study shows how a change in medium for pain assessment from paper via laptop to iPad affects the interaction with the tool on important aspects of use. We also show how changes of medium affect the readability of the output for health care workers. We achieved better results with an iPad-based pain assessment tool developed through user-centered design compared to both a paper-based and conventional laptop-based tool. [Copyright &y& Elsevier]

In this research the contribution of different factors resulting in the delay of publication of papers from submitting through publication process was studied. Due to the fact that publication delay might happen in different phases in other majors and fields so we have compared and studied this phenomenon in seven sciences and social sciences disciplines. We have examined 11,598 papers which have been published in 102 journals in 2009. The results showed that maximum and minimum time period in three stages belonged to received-revised which lasts eight months and the revised-accepted which lasted one month. Time periods in reviewing papers were different for different subject areas and only few percentages of journals had relatively low publication delay. The findings indicated that 56 % of chemistry papers, 57% of biology papers, 47% of surgery papers, 72% of papers in computer, 89% of economy papers, 96% of management papers and 71% of papers in library and information science have been published in more than six months. Finally and due to the delay efficacy as an efficacious indicator in increasing and decreasing of journals impact factors, can be said that these figures can be an alarm for journals officials in order to decreasing these delays and increasing their journals impact factor. [ABSTRACT FROM AUTHOR]

Abstract: Progress of carbon nanotube (CNT) research and development in terms of published papers and patents is reported. Developments concerning CNT structures, synthesis, and major parameters, in terms of the published documents are surveyed. Publication growth of CNTs and related fields are analyzed for the period of 2000–2010. From the explored search term, “carbon nanotubes”, the total number of papers containing the CNT concept is 52,224, and for patents is 5,746, with a patent/paper ratio of 0.11. For CNT research in the given period, an annual increase of 8.09% for paper and 8.68% for patents are resulted. Published papers for CNT, CVD and CCVD synthesis parameters for the period of 2000–2010 are compared. In other research, publications for CNT laser synthesis, for the period of 2000–2010, are reviewed. Publications for major laser parameters in CNT synthesis for the period of 2000–2010 are described. The role of language of the published references for CNT research for the period of 2000–2010 is also investigated. Published papers/patents in English, Japanese, Chinese, Russian, German, French, Polish, and Spanish languages are compared. As expected, the number of paper/patent publications in English dominates other languages. [Copyright &y& Elsevier]

Effective nutrition policies require timely, accurate individual dietary consumption data; collection of such information has been hampered by cost and complexity of dietary surveys and lag in producing results. The objective of this work was to assess accuracy and cost-effectiveness of a streamlined, tablet-based dietary data collection platform for 24-hour individual dietary recalls (24HR) administered using INDDEX24 platform v. a pen-and-paper interview(PAPI) questionnaire, with weighed food record (WFR) as a benchmark. This cross-sectional comparative study included women 18–49 years old from rural Burkina Faso (n 116 INDDEX24; n 115 PAPI). A WFR was conducted; the following day, a 24HR was administered by different interviewers. Food consumption data were converted into nutrient intakes. Validity of 24HR estimates of nutrient and food group consumption was based on comparison with WFR using equivalence tests (group level) and percentages of participants within ranges of percentage error (individual level). Both modalities performed comparably estimating consumption of macro- and micronutrients, food groups and quantities (modalities' divergence from WFR not significantly different). Accuracy of both modalities was acceptable (equivalence to WFR significant at P < 0·05) at group level for macronutrients, less so for micronutrients and individual-level consumption (percentage within ±20 % for WFR, 17–45 % for macronutrients, 5–17 % for micronutrients). INDDEX24 was more cost-effective than PAPI based on superior accuracy of a composite nutrient intake measure (but not gram amount or item count) due to lower time and personnel costs. INDDEX24 for 24HR dietary surveys linked to dietary reference data shows comparable accuracy to PAPI at lower cost. [ABSTRACT FROM AUTHOR]

Abstract: MobilePaperAccess is a wearable camera-glasses system with tangible user interface allowing mobile interaction. We access the digital information from a paper interface extending the input space. The system is devised to validate our concepts of Environment Dependent Interface (EDI) and Environment Independent Interface (EII), which focus on enabling people to access their personal data as well as public resources at any time and in any place. In this paper, we propose a continuum from physical interface to digital interface in relation with EDI and EII, and we present design, implementation and evaluation aspects of our MobilePaperAccess system. We compare two interfaces (EDI and EII) and three input techniques (finger input, mask input and page input). [Copyright &y& Elsevier]

Abstract: The continuation education is very important for people who have left school to work to increase their competence and skills. To avoid the disadvantages of the common test paper generating methods, genetic algorithm is used to generate the test paper automatically. The concrete design process of test paper generating based on genetic algorithm is discussed in this paper, and some corresponding parameters setting have been compared and defined. The application results demonstrated that the genetic algorithm was an effective tool in the test paper generating. [Copyright &y& Elsevier]

In the very few recently published paper by Alavidoost et al. [1] , they proposed a novel fuzzy adaptive genetic algorithm for multi-objective assembly line balancing problem, in continue of their previous presented work by Alavidoost et al. [2] , as a modification on genetic algorithm for assembly line balancing with fuzzy processing times. Despite the fact that both of them are well-written, and completely discussed their contributions, this note looks forward to collate these papers together. Likewise provides the correct order of the figures in [1] matching with their corresponding caption. [ABSTRACT FROM AUTHOR]

The article offers information on the task-oriented exercise which improved disability, pain and quality of life compared with general physiotherapy for surgically treated proximal humeral fractures.

The nervous system uses its own kind of mathematical function patterns for both external and internal realities. The conscious part of the nervous system is there to respond to what happens outside by regulating externally received information signals from the senses and the skin and muscles of the body itself. To do that, it needs to communicate with its subconscious using the familiar language of neural firing. In this paper, we show that because reciprocal pairwise comparisons are performed at the neural level, the division algebra of the octonions, in which commutativity and associativity are not satisfied, provides the structure needed to represent mental processes and that these processes could be represented in G2-manifolds. [ABSTRACT FROM AUTHOR]

Background: Prehospital emergency care services are one of the vital health services in many countries that provide first and immediate medical care to the patients and injured people at the scene and during transfer to healthcare centers. This study was conducted to investigate and compare the use of prehospital emergency services in urban and road emergency bases of Hamadan University of Medical Sciences. Materials and Methods: In a descriptive-analytic study, all missions (ambulance requests) conducted at urban and road emergency bases were studied and compared over three years. The study tool was a checklist compiled of questions from PCR (Patient Care Report). PCR contains written information about the patient's demographic characteristics, mission time, mission address, mission reasons, emergency base and mission code (ambulance identification code), and so on. Finally, the collected data were analyzed using descriptive (mean and variance) and inferential statistics (t test and Chi-square). Results: The results of the study indicated that every year, urban bases missions increased about 600 and rural bases missions about 450. Road traffic incidents, falls, cardiac emergencies and poisoning were the most common causes for ambulance call at urban and road emergency bases. In addition, urban and road bases missions were significantly different with regard to the cause of missions in all cases (except heat stroke) (P<0.01). Conclusion: Understanding the number and pattern of prehospital emergency services in urban and rural areas plays a significant role in the proper planning of prehospital emergency care. The study showed that the need for emergency prehospital emergency services is increasing and policymakers should be considered this issue. [ABSTRACT FROM AUTHOR]

The use of mineral fillers in cellulosic paper products can result in cost/energy savings and improvement of paper properties. However, the increase in filler addition levels is hampered by the negative impact of fillers on paper strength, poor filler retention, etc. As an attempt to improve the use of fillers in papermaking, filler modification with the combination of cationic starch and carboxymethyl cellulose was preliminarily explored in this mini-study. This concept was compared with filler modification with either cationic starch or carboxymethyl cellulose. The combination of cationic starch with carboxymethyl cellulose resulted in improved attachment of the starch to the filler, possibly suggesting the in-situ formation of polymer complexes with lower solubility than starch. With respect to filler retention, tensile strength, brightness, and opacity of the filled paper, the combined use of cationic starch and carboxymethyl cellulose resulted in a modified filler material with modestly better performance, in comparison to filler modification with either cationic starch or carboxymethyl cellulose. The combined use of a cationic polymer and an anionic polymer to modify fillers may provide an alternative approach to improving the use of mineral fillers in the paper industry. [ABSTRACT FROM AUTHOR]

Background: When a journal receives a duplicate publication, the ability to identify the submitted work as previously published, and reject it, is an assay to publication ethics best practices. The aim of this study was to evaluate how three different types of journals, namely open access (OA) journals, subscription-based journals, and presumed predatory journals, responded to receiving a previously published manuscript for review.Methods: We performed a quasi-experimental study in which we submitted a previously published article to a random sample of 602 biomedical journals, roughly 200 journals from each journal type sampled: OA journals, subscription-based journals, and presumed predatory journals. Three hundred and three journals received a Word version in manuscript format, while 299 journals received the formatted publisher's PDF version of the published article. We then recorded responses to the submission received after approximately 1 month. Responses were reviewed, extracted, and coded in duplicate. Our primary outcome was the rate of rejection of the two types of submitted articles (PDF vs Word) within our three journal types.Results: We received correspondence back from 308 (51.1%) journals within our study timeline (32 days); (N = 46 predatory journals, N = 127 OA journals, N = 135 subscription-based journals). Of the journals that responded, 153 received the Word version of the paper, while 155 received the PDF version. Four journals (1.3%) accepted our paper, 291 (94.5%) journals rejected the paper, and 13 (4.2%) requested a revision. A chi-square test looking at journal type, and submission type, was significant (χ2 (4) = 23.50, p < 0.001). All four responses to accept our article came from presumed predatory journals, 3 of which received the Word format and 1 that received the PDF format. Less than half of journals that rejected our submissions did so because they identified ethical issues such as plagiarism with the manuscript (133 (45.7%)).Conclusion: Few journals accepted our submitted paper. However, our findings suggest that all three types of journals may not have adequate safeguards in place to recognize and act on plagiarism or duplicate submissions. [ABSTRACT FROM AUTHOR]