Search

The integration of communication infrastructures into traditional power systems, transforming them into cyber-physical power systems (CPPS), accentuates the significance of communication in influencing system performance and sustainability. This paper presents a versatile, innovative cyber-physical co-simulation framework that integrates the physical power system and communication networks, uniting OPAL-RT, a network simulator (ns3), and Docker containers into a sophisticated platform, facilitating intensive studies into CPPS dynamics. The proposed experimental study provides an innovative way to assess the frequency control response of a cyber-physical inverter-based microgrid (MG), addressing the MG sustainability challenges. We consider diverse real-world scenarios, focusing on communication delays and distributed denial of service (DDoS) attacks within the communication channels. We propose a precise ns3-based communication model that bridges the MG's primary and secondary control layers, an aspect often overlooked in previous studies; this is a noteworthy contribution to elucidating the adverse impacts of communication latency on MG frequency performance. The experimental results demonstrate the effectiveness of the centralized secondary controller in eliminating the frequency deviations. Furthermore, the findings offer insights into stable and unstable regions, revealing how the communication delay value affects the frequency stability under different operating conditions. In addition, the developed real-time DDoS attacks model within the proposed communication surface unveils crucial insights into the MG's resilience to cyber threats. This work's revelations offer a foundational awareness of MG vulnerabilities, paving the way for designing robust and resilient communication networks and control strategies within the cyber-physical inverter-based microgrids. [ABSTRACT FROM AUTHOR]

Photovoltaic (PV) systems are becoming essential to our energy landscape as renewable energy sources become more widely integrated into power networks. Preserving grid stability, especially during voltage sags, is one of the significant difficulties confronting the implementation of these technologies. This attribute is referred to as low-voltage ride-through (LVRT). To overcome this issue, adopting a Proportional-Integral (PI) controller, a control system standard, is proving to be an efficient solution. This paper provides a unique algorithm-based approach of the Marine Predator Algorithm (MPA) for optimized tuning of the used PI controller, mainly focusing on inverter control, to improve the LVRT of the grid, leading to improvements in the overshoot, undershoot, settling time, and steady-state response of the system. The fitness function is optimized using the MPA to determine the settings of the PI controller. This process helps to optimally design the controllers optimally, thus improving the inverter control and performance and enhancing the system's LVRT capability. The methodology is tested in case of a 3L-G fault. To test its validity, the proposed approach is compared with rival standard optimization-based PI controllers, namely Grey Wolf Optimization and Particle Swarm Optimization. The comparison shows that the used algorithm provides better results with a higher convergence rate with overshoot ranging from 14% to 40% less in the case of DC-Link Voltage and active power and also settling times in the case of MPA being less than PSO and GWO by 0.76 to 0.95 s. [ABSTRACT FROM AUTHOR]

The operation of parallel inverters in microgrids is an important way to expand system capacity, but there are problems of circulating current fluctuations and power sharing errors in parallel inverters' operation. In this paper, a parallel operation strategy for inverters based on improved adaptive droop control and Equivalent Input Disturbance (EID) is proposed. Firstly, the model and control topology of parallel inverters are presented. Secondly, in order to solve the power sharing error caused by impedance difference and the voltage drop caused by virtual impedance, a reference voltage generator based on improved adaptive droop control is proposed. Then, considering the circulating current fluctuation as a disturbance, a voltage controller based on an equivalent input disturbance approach is proposed to reduce the disturbance. Finally, simulation in MATLAB/Simulink is carried out to verify the effectiveness of the parallel operation strategy. [ABSTRACT FROM AUTHOR]

Electric vehicles are the most innovative and promising area of the automotive industry. The efficiency of a traction battery is an important factor in the performance of an electric vehicle. This paper presents a mathematical model of an electric truck, including modules for the traction battery to determine the depth of battery discharge during the operation of the electric truck, a traction electric system for the electric truck and a system for calculating traction forces on the shaft in electric motors. As a result of the modelling, the charging and discharging currents of an accumulator battery in a real cycle of movement in peak and nominal modes of operation in electric motors and at different voltages of the accumulator battery are determined. A functional scheme of a generalized model of the electric vehicle traction electrical equipment system is developed. An experimental battery charge degree, torques of asynchronous electric motors, temperature of electric motors and inverters, battery voltage and the speed of electric motors have been measured and analysed. The developed complex mathematical model of an electric vehicle including a traction battery, two inverters and two asynchronous electric motors integrated into an electric portal bridge allowed us to obtain and study the load parameters of the battery in real driving cycles. Data were verified by comparing simulation results with the data obtained during driving. [ABSTRACT FROM AUTHOR]

This paper introduces a Multi-Level Cascade Inverter (MLI) based on Enhanced Quasi-Z Source Inverter (MQZSI) to connect photovoltaic (PV) systems based on the proposed method. Usually the interface among PV power supply and load is completed with MQZS-CMLI. In this paper, the proposed control scheme is comprehensive implementation of Recalling Enhanced Recurrent Neural Network (RERNN) and Quasi-Opposite Chemical Reaction Optimization (QOCRO) named as RENCO. The main objective of proposed method is to decide the efficiency of the PV system by the maximal power extraction. Here, MQZS-CMLI's modeling design contains suitable number of components, other than their capacitors and semiconductors comply with low-voltage stress. It is improved for providing that maximum power of the PV power generation system. At first, the goal function is described according to the parameters and limitations of controller (like voltage, current, power, modulation index, so on). These parameters apply to recommend RENCO technology input. The proposed RENCO technology improves voltage distribution, power transmission, and minimizes power fluctuations while sharing power with load. The proposed MPPT-based technology ensures that the maximum power is provided to load. The proposed method adjust the duty cycle of MQZS-CMLI and reduces the modulation load. Finally, the proposed technology is executed on the MATLAB/Simulink platform, and its output efficiency is compared to existing systems under dissimilar load circumstances. [ABSTRACT FROM AUTHOR]

Grid-forming inverters, which are represented by droop control and virtual synchronous generator control, have been widely studied and applied because of their excellent grid-supporting ability and smooth off-grid switching. When a grid-forming inverter is connected to a microgrid or utility grid, the control loops of active power and reactive power will be coupled because of the voltage phase difference, which will affect the power control performance. This paper first derives the small-signal linearized model of the system, based on which a frequency feedforward control and an amplitude feedforward control are proposed to decouple the active power and reactive power control loops, respectively. The proposed decoupling strategy directly modifies the reference values through feedforward with an easily implementable principle that is applicable to various control coordinate systems, control coordinate systems, and control structures. By comparing system models with and without the proposed decoupling strategy, its effectiveness can be theoretically proven. Time-domain simulations and hardware experiments are presented to further validate its effectiveness. [ABSTRACT FROM AUTHOR]

The three-phase four-wire voltage source inverter (3P4W VSI) is widely used in applications like uninterrupted power supply (UPS) and bidirectional onboard charger. The increasing power density demand requires higher switching frequency and lower switching loss. To fulfill the conflicting objectives, two-fold methodology is proposed in this paper: 1) SiC/Si hybrid switches (HyS) together with recently reported gate trigger are reported for the first time in the 3P4W VSI; 2) the natural point voltage is controlled to track a sinusoidal voltage with the frequency equal to 3 times of fundamental frequency in order to achieve higher DC-bus voltage utilization rate, and further reduce the switching loss. The traditional PI controller is very hard to achieve desired performance due to both the nonlinearity and the variant reference of the natural point voltage control system. Thereby, the super-twisting sliding mode control (ST-SMC) is proposed in this paper to achieve desired tracking performance and fast dynamic response. The effectiveness and superiority of the system are verified by both simulation and experiment comparison with the existing methods using a 5 kW prototype. • A new trigger circuit proposed recently is used for the first time in a 4 legs inverter. • The relationship of DC-bus voltage and HyS switching loss is derived and testified. • The super-twisting sliding mode control achieves high tracking accuracy in 3P4W inverter. • HyS and suitable controller comprehensively improve the performance of 3P4W inverter. [ABSTRACT FROM AUTHOR]

The appealing design known as the quasi‐Z‐source inverter (qZSI) can function in both buck and boost modes. In the meantime, model predictive control (MPC) for power transformers has attracted a lot of interest. In order to improve performance and solve the shortcomings of the current MPC, this paper suggests a low‐computation‐burden model predictive current control (LCB‐MPCC) for the grid‐tied qZSI. Two active vectors, one zero vector, and one shoot‐through (ST) vector are used in the production of the output voltage. To get around the weighting factor, a modified sliding‐mode control technique is suggested for instantly controlling the inductor current and capacitor voltage to their regulating spots. The duty cycle of the ST vector is acquired by the dead‐beat control to restrict the inductor current and significantly reduce the inductor current ripple. Additionally, an effective and quick optimal sector selection strategy is provided that uses a look‐up table to pick the optimal sector rather than a number of intricate calculations. Therefore, the proposed LCB‐MPCC greatly reduces the computational burden. To demonstrate the efficacy and benefits of the suggested technique, simulation and experimental results are presented. [ABSTRACT FROM AUTHOR]

Proton exchange membrane fuel cells (PEMFC) have been noticed by researchers due to their high efficiency, low pollution, and high‐power density in distributed generation systems. In this paper, an LCL‐type grid‐tied PEMFC fuel cell power conditioning system is evaluated in a harmonics‐polluted low‐voltage grid. The LCL‐filters can lead to resonance and instability despite their capability to attenuate harmonics. In this research, a transformer has been used to connect the fuel cell inverter to the grid. The grid‐side inductor of LCL‐filter is realized by the leakage inductance of the transformer. In addition, for more effective resonance damping and attenuation of current ripples caused by the grid voltage harmonics, a capacitor voltage comprehensive feedback control has been designed and investigated. The comprehensive feedback control of the capacitor voltage contains proportional, first and second‐order derivative terms. In the proposed control scheme, the capacitor‐current‐feedback is opposed by the capacitor voltage derivative term due to reverse loop gain, which leads to deleting both of these loop gains. As a result, there is no need to utilize a current sensor in this control method. Consequently, the proportional and second‐order derivative terms of the capacitor voltage attenuate the LCL‐filter resonance. A low‐pass filter is also considered in the second‐order derivative loop in the controllable frequency range to ensure system stability. The simulation results of the PEMFC power conditioning system in different conditions confirm the proper attenuation of LCL resonance of grid‐tied inverter, high‐quality current injection to the harmonics polluted grid, the suitable stability, and the appropriate dynamic response for the proposed system. Under the proposed control scheme, the fuel cell power conditioning system demonstrates satisfactory stability. Even when reducing the LCL filter values by 5%–20%, the system maintains its stability effectively. Moreover, the THD of the injected current into the grid, employing the proposed control strategy, has been successfully reduced to an impressive value of 1.97% in a weak and harmonical grid. [ABSTRACT FROM AUTHOR]

Multilevel inverters (MIs) are widely used in voltage source inverter applications due to their advantages of high-quality output voltage waveform, low power loss and low voltage stress. Compared with multiple DC source MI (MDCS-MI), single DC source MI (SDCS-MI) needs one DC source. This makes SDCS-MI more simplified and avoid voltage unevenness among multiple sources, which are advantageous in renewable energy (RE) applications. In order to understand SDCS-MI, this paper classifies and compares existing SDCS-MIs according to classical topologies based on isolated and non-isolated construction, summarizes the advantages and limitations of each type of topologies, and briefly introduces various control strategies of SDCS-MI. Finally, this paper discusses the SDCS-MI in RE systems. In addition, the development trend of SDCS-MI is also analyzed in this paper. [ABSTRACT FROM AUTHOR]

This paper proposes a new adaptive nonlinear extended state observer‐based model predictive controller (ANLESO‐MPC) for residual current compensation (RCC) inverters to compensate fault characteristics in resonant grounded power systems (RGPSs). In the proposed scheme, the adaptation feature is used to adapt the adjustable inductor appearing in the dynamical model of RGPSs by satisfying the desired fault current compensation requirement which in turn will ensure the resonance condition. Since the adapted parameter is used in the control signal, the ANLESO‐MPC offers robustness against parameter sensitivity. The neutral voltage is considered as a disturbance and the change in this voltage as an extended state to estimate this disturbance while incorporating the adapted parameter so that the adaptive nonlinear extended state observer (ANLESO) provides robustness against disturbances. Finally, the model predictive controller (MPC) is designed for the RCC inverter utilizing estimated disturbances and adapted parameters to fully achieve the fault current compensation. The performance of the controller is evaluated using simulations in MATLAB/Simulink and OPAL‐RT real‐time platforms under varying fault impedances as the fault characteristics change with variations in the fault impedance. Results are also compared with a conventional MPC where the proposed ANLESO‐MPC seems more effective to compensate fault characteristics. [ABSTRACT FROM AUTHOR]

Three-level NPC inverters have been widely used in grid-connected systems due to their superior performance compared with two-level inverters, but more switches lead to high fault probability. Meanwhile, the neutral point potential (NPP) fluctuation of the DC link is an inherent problem of three-level NPC inverters. To keep the three-level NPC inverter running stably after single-arm failure, a fault-tolerant control strategy based on an optimised space vector pulse width modulation (SVPWM) is proposed in this paper. Firstly, the common-mode voltage (CMV) of the postfault three-level NPC inverter is analysed and then the preliminary synthesis principles of the reference voltage vector are determined. Then, in order to ensure the NPP balance and the quality of the grid-connected currents, the reference voltage vector synthesis rules are optimised, a low-pass filter (LPF) and a hysteresis comparator are designed, respectively, to ensure the quality of grid-connected currents and effectively decrease the DC link NPP deviation. Finally, the simulation results show that the proposed fault-tolerant control strategy can realize the stable and reliable operation of the grid-connected three-level NPC inverter after single-arm failure, and the CMV can be reduced significantly, the quality of grid-connected currents is also improved. The proposed fault-tolerant strategy also shows good performance when the grid-connected currents change. [ABSTRACT FROM AUTHOR]

In general, severe load imbalances in small AC micro-grid systems can degrade their operational performance and their maintenance. This is because the unbalanced load in the micro-grid affects the energy flow and the voltage regulation functions of each phase. In order to solve the voltage imbalance problem, several algorithms for the 3-phase 4-leg CVCF inverter have been proposed, but the control algorithms are not enough to operate the 4-leg CVCF inverter in a stable manner. Therefore, this paper proposes a single-phase voltage and power control algorithm for the 3-phase 4-leg CVCF inverter based on a dq control in order to improve the voltage imbalance problem caused by a severely unbalanced load, where the single phase voltage control algorithm is composed of an αβ-dq and a dq-αβ transformer, a voltage and a current controller, and an off-set controller and a PWM, and the single-phase power control algorithm is also composed of an αβ-dq and a dq-αβ transformer, an active/reactive power and a current controller, and an off-set controller and a PWM. Additionally, this paper performs modeling of the single-phase voltage and the power controller for a 4-leg CVCF inverter using the Matlab/Simulink S/W. From the simulation results, it is confirmed that the transient stability of the proposed single voltage control algorithm can be improved compared to the conventional control algorithm, and voltage control can also be maintained in a stable manner under extremely unbalanced conditions. Further, it is confirmed that 3-phase currents of the proposed single-phase power control algorithm are controlled in a stable manner under extremely unbalanced conditions. [ABSTRACT FROM AUTHOR]

By combining the filter circuit and boost circuit, the filter‐integrated three‐switch boost inverter (TSBI) is proposed in this paper. Different from the traditional boost inverter, TSBI achieves the boost function at the AC side, so the voltage stress on the switches is small. Through modelling and analysis, the boosting characteristics and filtering characteristics of the system are obtained. The proposed topology can significantly suppress the resonance spike and does not need to add additional filtering equipment, which can reduce the volume of equipment and system loss. In order to clearly illustrate the advantages and disadvantages of the proposed topology, this paper makes a detailed comparison with other types of inverters. Finally, the feasibility of the system is verified by experiment and simulation. [ABSTRACT FROM AUTHOR]

The main aim of the research work presented in this paper consists of proposing an effective control scheme for a grid-connected single-phase photovoltaic (PV) system to enhance not only the power quality at the point of common coupling (PCC) but also to operate with a maximum power point tracking (MPPT) controller. Moreover, an orthogonal signal generator (OSG) module for effective grid synchronization, a current reference generation controller, and a PWM generating block have also been designed and included in this paper. The proposed control strategy allows the MPPT controller to switch to faulty mode and maintains the voltage according to network requirements using an adaptive neuro-fuzzy inference system (ANFIS)-based control whenever a fault occurs at the PCC. The performance of the analyzed control strategy, which is based on the static compensation of the DC-link voltage fluctuations in a grid-connected inverter powered by PV, is further explored through simulations in MATLAB, and the results are included in this paper. Moreover, the control scheme is implemented experimentally using a dSPACE DS 1104 control board and then assessed on a small laboratory-scale single-phase PV system that is subjected to some fault scenarios. The simulation and experimental results have shown improved power quality and robustness against grid fluctuations, resulting in better dynamic performance. [ABSTRACT FROM AUTHOR]

This paper introduces a mathematical design and analysis of three-phase inverters used in electric drive applications such as aerospace, electric vehicles, and pumping applications. Different wide bandgap (WBG) semiconductor technologies are considered in this analysis. Using SiC MOSFETs and Si IGBTs, two drive systems are developed in order to show the improvement in the efficiency of the inverter. The efficiency, total losses of the drive systems and the power losses of two inverters are computed and compared for both drive systems at the same operating condition. The drive system with SiC MOSFET shows much better performance compared to the drive system with Si IGBT. The SiC MOSFET system provides a 59.39%, 86.13%, and 29.76% lower conduction losses, switching losses and drive's total losses, respectively, compared to the Si IGBT system. The efficiency of the SiC MOSFET system is 2.46%pu higher than the efficiency of the Si IGBT drive system. Moreover, this paper introduces a detailed analysis for the dc-link voltage and current ripples in three-phase inverters. Furthermore, the minimal dc-link capacitor needed to deal with the ripple current and voltage is investigated. Finally, the performance of the drive with Si IGBT is experimentally tested under different operating speeds and loads. [ABSTRACT FROM AUTHOR]

In response to the problems of impedance variation and rich background harmonics in the weak grid environment of traditional LCL grid-connected inverters, which cause distortion of the grid-connected current and reduce the stability of the entire grid-connected system, this paper proposes a passive fuzzy-active disturbance rejection control strategy. Firstly, passivity-based control (PBC) is introduced into the grid-connected inverter system to ensure the global stability of the entire system. Secondly, in order to solve the problem of difficult selection of inverter-side current, active disturbance rejection control (ADRC) is used to directly track the grid-connected current, avoiding the tracking error of AC signal and suppressing the interference of background harmonics of grid voltage. The combination of fuzzy control and ADRC simplifies the system parameter tuning process, and the FUZZY-ADRC grid-connected current outer loop and PBC inductance current inner loop are combined to form a multi-loop control system. Finally, simulation comparison verifies that the proposed control strategy can effectively suppress the harmonics of grid-connected current, improve the quality of grid-connected current, and enhance the stability of the entire grid-connected system in a weak grid environment. [ABSTRACT FROM AUTHOR]

This paper demonstrates the controlling abilities of a large PV-farm as a Solar-PV inverter for mitigating the chaotic electrical, electromechanical, and torsional oscillations including Subsynchronous resonance in a turbogenerator-based power system. The oscillations include deviations in the machine speed, rotor angle, voltage fluctuations (leading to voltage collapse), and torsional modes. During the night with no solar power generation, the PV-plant switches to PV-STATCOM mode and works as a Solar-PV inverter at its full capacity to attenuate the oscillations. During full sun in the daytime, on any fault detection, the PV-plant responds instantly and stops generating power to work as a Solar-PV inverter. The PV-farm operates in the same mode until the oscillations are fully alleviated. This paper manifests the control of the DC-link capacitor voltage of the Solar-PV inverter with a bacterial foraging optimization-based intelligent maximum power point tracking controller for the optimal control of active and reactive power. Kundur's multi-machine model aggregated with PV-plant is modeled in the Matlab/Simulink environment to examine the rotor swing deviations with associated shaft segments. The results for different test cases of interest demonstrate the positive outcomes of deploying large PV-farms as a smart PV-STATCOM for controlling power system oscillations. [ABSTRACT FROM AUTHOR]

In response to the rapid changes in the international energy environment, developing renewable energy (RE)-based distributed generation (DG) and various smart micro-grid systems is crucial for creating a robust electric power grid and new energy industries. In this aspect, there is an urgent need to develop hybrid power systems suitable for coexistent AC and DC power grids, integrated by high-performance wide ban gap (WBG) semiconductor-based power conversion interfaces and advanced operating and control strategies. Due to the intrinsic feature of variation in RE-based power generation, the design and integration of energy storage devices, real-time regulation of power flow, and intelligent energy control schemes are key technologies for further promoting DG systems and micro-grids. This paper investigates an integrated control scheme for multiple GaN-based power converters in a small- to medium-capacity, grid-connected, and RE-based power system. This is the first time that a complete design case demonstrating three GaN-based power converters with different control functions integrated with a single digital signal processor (DSP) chip to achieve a reliable, flexible, cost effective, and multifunctional power interface for renewable power generation systems is presented. The system studied includes a photovoltaic (PV) generation unit, a battery energy storage unit, a grid-connected single-phase inverter, and a power grid. Based on system operation condition and the state of charge (SOC) of the energy storage unit, two typical operating modes and advanced power control functions are developed with a fully digital and coordinated control scheme. Hardware of the GaN-based power converters and digital controllers are designed and implemented. The feasibility and effectiveness of the designed controllers and overall performance of the proposed control scheme are verified with results from simulation and experimental tests on a 1-kVA small-scale hardware system. [ABSTRACT FROM AUTHOR]

Repetitive control (RC), which can track any periodic signal with a known integer period with zero steady-state error, is widely used for current control of grid-tied inverters in microgrids. However, the inherent one fundamental period time delay, leads to poor dynamic performance. Furthermore, the performance of conventional RC (CRC) will degrade when operating at a high variation grid frequency. Therefore, this paper proposes a frequency adaptive improved RC (FA-IRC) for grid-tied inverters. The improved RC (IRC) consists of a repetitive controller with a modified internal model filter, plus a proportional controller. In comparison to the CRC, the IRC has a good dynamic response, because it provides a higher gain and a wider bandwidth at the resonant frequency. Moreover, to achieve the frequency adaptability of the IRC, a fractional delay, based on a finite impulse response (FIR) filter, is built into the IRC system, to ensure that the resonant frequency of the IRC is approximately equal to the actual grid frequency and harmonic frequency. Stability analysis and characteristic analysis of the FA-IRC system are reported in this paper. Simulations are conducted, to demonstrate the validity of the proposed method. [ABSTRACT FROM AUTHOR]

With the emergence of renewable energy sources (RESs), the power grid all over the world is going through a paradigm shift. The inverter based RESs are replacing the conventional rotating synchronous generators and this trend is expected to continue in coming years. Consequently, the grid strength is decreasing, which can pose significant challenges on the grid stability, especially during integration of IRESs. This paper presents a thorough analysis on the integration challenges of IRESs in weak grids. The paper also presents a comprehensive investigation on the impacts of factors, such as available fault level at the point of interconnection (POI), feeder length and grid nature on the POI voltage, and maximum allowable power injection by IRES. This is followed by maximum allowable IRES power injection sensitivity analysis to quantify the impacts of the aforementioned factors. The paper concludes with a thorough case study on the IEEE 39‐bus test system to numerically show the impact of diminishing grid strength on the integration of IRESs. [ABSTRACT FROM AUTHOR]

This paper presents a live field experience of creating an isolated microgrid for the Expoelectric fair during 2018 and 2019. The islanded microgrid comprises a Master Inverter with grid-forming capabilities and fault management. The Master Inverter and stationary batteries, and EVs with V2G capabilities provide storage. A PV generation system supplies the microgrid. The loads are the fair booths, mainly lighting and chargers for personal mobility vehicles. All the equipment used in the experimental microgrid is from different manufacturers. The operation and control of the islanded microgrid are based on the VDE-AR-N-4105 standard. The paper also presents the operation of the Master Inverter during faults. The live field experience shows that the proposed operation method is valid for operating different converters from different manufacturers without needing any communication layer between them. The experimental results also show that faults can be handled correctly by the Master Inverter to operate the entire microgrid safely. In conclusion, islanded microgrids based on power electronics are feasible to replace diesel generators in faires, conventions or temporary events. [ABSTRACT FROM AUTHOR]

This paper highlights an immediate need for renewable generation developers, manufacturers, utilities and industry standardization institutes to jointly address a challenge of capacitor switching transient immunity in inverter-based wind or solar farms. The need was identified from wide-area operation records which showed partial or full generation loss in coincidence with routine utility-owned capacitor switching. The lack of a clear industry guideline has caused confusion to all involved parties. This paper recommends all entities to address this challenge collaboratively through enhanced equipment specification, design, and test before a well-defined industry guideline becomes available. [ABSTRACT FROM PUBLISHER]

Some inverter-fed motors, particularly at higher power ratings, are supplied with a shaft brush in order to help mitigate bearing currents. As more inverters are applied to motors in Class I Division 1/Zone 1 and Class I Division 2/Zone 2 locations, there is a need to understand whether a shaft brush can be safely applied in such an environment. This paper addresses the physics of why this is a concern and a methodology to evaluate the relative safety of two example cases. These issues are considered from the perspective of users, manufacturers of inverters and motors, and certifying bodies. The question posed in the title of this paper is answered by considering whether the addition of a shaft brush to an inverter-fed motor in a Class I hazardous location makes the system more safe or less safe. [ABSTRACT FROM PUBLISHER]

Even if modern diagnostic techniques in power electrical engineering are considered as mature, there are still innovations to be published. Therefore, among the 188 papers submitted to this Special Section, 28 have been selected to be published in two parts. This Introduction is related to the first 14 selected papers, which have been divided into three topics dealing with: electrical machines failures detection with bearings (four papers), backlash phenomena (one paper), shaft trajectories (one paper), and winding short circuits (one paper); adjustable-speed drives with permanent-magnet synchronous machines (PMSMs) winding short circuits (one paper), drive sensors (one paper), prognosis (one paper), inverter open-circuit detection (one paper), and multiphase induction motors (one paper); power systems (one paper) and transformers (one paper) particular fault detection. [ABSTRACT FROM PUBLISHER]

Distributed generation is an issue intensively studied in recent years. It concerns, among others protection systems of distributed generation units connected to electric power grids. The main goal of this paper is to present the issue of functional reliability of selected passive loss of mains (LoM) protection systems, i.e. methods of detecting island operation in distribution power grids, which are implemented in PV inverters installed in sample MV and LV grids, typical for Polish conditions. First, different methods of detecting island operation have been distinguished and shortly characterized. Some problems concerning their action have also been presented. Then commonly used passive methods of island grid operation detection have been described. Next sample distribution grid has been presented and chosen disturbances modelled in the grid to test mentioned passive methods have been defined. For each of the determined type of disturbance the dynamic simulation has been carried out, as well as voltage and frequency plots for two selected RES nodes have been recorded and observed. All considered passive methods of island grid operation detection have been implemented in a Matlab/Simulink environment. Models of RoCoF, U/OVP and U/OFP algorithms have been presented in diagrams. Then, results of carried out extensive studies have been shown in tables and discussed. The results are a consequence of a realized research project concerning electric grids in rural areas. Summary, final conclusions, and future research possibilities constitute the last part of the paper. The conclusions are mainly concentrated on evaluation of action of passive methods of island operation detection as well as possibility of using the methods in Polish conditions, particularly in rural distribution grids. [ABSTRACT FROM AUTHOR]

Grid-connected inverters in renewable energy systems must provide high-quality power to the grid according to regulatory standards such as the IEEE 1547. To provide high-quality current control when the inverter is connected to a distorted grid, the frequency and phase information of the fundamental harmonic of the grid should be accurately obtained. This paper examines controller design for a single-phase inverter when there is distortion in the grid voltage. The control structure is designed to enhance the quality of the injected current into the grid. To this end, a frequency-locked loop (FLL) sinusoidal tracking controller which is able to reject the grid harmonics is proposed. Thus, the contribution of this paper is a new frequency-locked loop structure with adaptive notch filters that can provide accurate estimation of grid phase and frequency and improve the performance of single-phase inverters working under harmonic distortion. We also present an explanation of how the proposed adaptive nonlinear scheme can be discretized for digital implementation on a microcontroller. Experimental and simulation results are presented to demonstrate the performance of the proposed controller in eliminating distortion and enhancing the quality of the produced power. [ABSTRACT FROM AUTHOR]

Green energy from Solar PV is getting increased attention in the industries due to the falling price of solar panels in the world market. A grid-tied inverter is one of the major components in such a system, where the DC energy from PV is converted to AC and synchronized with the grid to obtain power sharing between the PV and the grid for the industrial drives. In this paper, a DC link has been proposed instead of an AC link for interconnection between the solar PV system and the grid to run those industrial drives. In most modern industrial applications, induction motors are driven by VVVF (Variable Voltage and Variable Frequency) inverters to achieve efficient speed control. The inverters commonly have a rectifier section at the front end that rectifies the input AC to DC and the DC is then used in PWM mode to generate the required voltage and frequency for the induction motor operating under variable speed and load conditions. Such an inverter can use both AC or DC as the input so long the supply voltage has the right value for the inverter to operate. In our proposition, we eliminate the grid-tied inverter and use a DC link, created from the rectified AC and the regular Solar PV, to obtain the power-sharing between the PV output and the grid. Using the DC link output directly to energize the VVVF inverter has an impact on the performance of the inverter. In the proposed system, the solar PV array is designed in such a way that the grid remains as the supplementary power source only to supplement any shortfall in the PV output due to variable sunshine conditions. The control circuit used in this novel technique is inexpensive, efficient, and simple in design when compared to the grid-tied inverters. The proposed system has been implemented at Niagara Textiles in Gazipur, Bangladesh. The experimental/practical results are presented to validate the basic concept. Around a 20% reduction in the cost of energy has been reported in this paper, with a more than 90% efficient system. This will definitely make solar PV energy more competitive with regular energy and attractive to industries for its simplicity. [ABSTRACT FROM AUTHOR]

This paper addresses the synchronization and operation of a 140 kVA inverter system connected to the main grid as part of a decentralized microgeneration system. The considerations for the supply of electrical energy stored in battery banks, mostly of photovoltaic origin, involve a study of the details of a rigid nonlinear system, which parallels the generation and distribution standards typical of hydroelectric and thermoelectric plants. Considering aspects related to power electronics operation, this paper presents both the modeling and the controlling aspects necessary to synchronize and ensure a stable operation of the microgeneration systems when connected to the main grid. Statistical processing was developed to guarantee synchronization between the systems without presenting electric shocks by simulating the magnetic link in asynchronous generators to meet this aim. The proposed model simulates the increase in power by a phase shift by maintaining a constant frequency based on a Chirp wave generator. The proposed process considers a generation power baseband operation. A Mamdani-type fuzzy proportional-integral controller is used to determine the power setpoint, which sets the Chirp generator phase shift setpoint, which includes a Mamdani fuzzy proportional-type controller. Both controllers are connected in a cascade. The applied correlational technique to achieve the synthesis of the sinusoid and the synchronization presented optimal performance when using 17 samples per signal period. The design of the transformer primarily, guaranteed a phase shift of −4.3018°, allowed for a THD below 2.75%. [ABSTRACT FROM AUTHOR]

This paper presents a dead-beat control algorithm for Uninterruptible Power Supply (UPS) applications of single-phase inverters. The proposed control method requires the measurement of capacitor current and output voltage in order to keep the output voltage sinusoidal ensuring high dynamic performance even under load changes. The dead-beat controller optimizes the behavior of the system by eliminating the error between the output and the reference voltage without increasing the number of current sensors, which are costly, and eliminates load voltage distortions and restores the system state in the event of external shutdown-loop road interference. In this paper, we propose a capacitor current estimation based on the Luenberger observer. Processor-In-the-Loop (PIL) is a test method that allows us to create and evaluate controllers by running built-in C code on the DSP scheduled for the controller during simulated PSIM power phase control. It can be seen that the simulation results match the PIL test results, which proves the validity of the proposed controller. [ABSTRACT FROM AUTHOR]

Distributed power generation plays a critical role in the stability and reliability of modern power systems. Due to the rapid growth of renewable energy generation, the requirements of the transmission and distribution system operators are becoming more stringent. Among these requirements, one of the most important is the Low-Voltage Ride-Through (LVRT) capability, which demands that the inverters remain connected to the grid and provide support during voltage sags. For this purpose, flexible current control algorithms stand out because they can manage unbalanced voltages and simultaneously achieve other control objectives. With the aim of presenting a concrete document focused on describing fundamental principles and discussing common design guidelines, this paper presents an overview of flexible current control strategies applied to LVRT capability. The operation features and design aspects of experiences reported in the literature are reviewed. Moreover, the paper proposes a general methodology to design LVRT flexible current control algorithms. Finally, current and future trends are discussed. [ABSTRACT FROM AUTHOR]

The combination of permanent magnet synchronous motor (PMSM) and inverter is the key electric drive system (EDS) of electric vehicles (EVs), and its overall efficiency seriously affects the energy consumption of EVs. In order to further improve the efficiency of PMSM-inverter, the influence of a special control object current angle β on EDS was studied and the general rule between β and EDS efficiency was obtained in this paper. Then, the golden section search (GSS) method was used to obtain optimal β and its corresponding stator current is, which can realize EDS working in optimal efficiency in the whole EDS working area. On this basis, an overall efficiency optimization control strategy for EDS based on the current angle β look-up table was proposed in this paper. To verify the effectiveness of the proposed control strategy, simulation considering iron loss and copper loss of motor and inverter loss was completed, which showed that compared with traditional control, the control strategy proposed in this paper can effectively improve the working efficiency of EDS under steady state and transient state. [ABSTRACT FROM AUTHOR]

The staircase modulation strategy is the best choice for asymmetric cascaded H-bridge multilevel inverter (ACMI) because it makes the output voltage to present a high number of levels and makes one of the ACMI modules to operate at low frequency. However, the staircase modulation is usually employed without giving its deserved attention. This paper presents a clear understanding of the staircase modulation strategy and its applications in both isolated and grid-connected ACMI.  The main novelty of this paper is the obtaining of the switching function for each module. The principle of operation is carefully described, also indicating how to command the ACMI transistors. The output voltage of the two superior modules is evaluated for different values of iterations. Special attention is given to the power distribution among the ACMI modules when the staircase modulation is applied. It is demonstrated on how the power is processed in each module considering an ACMI with three modules. The analysis is presented showing the staircase modulation within a closed-loop control strategy for isolated and grid-connected modes of operation, showing that the content of this paper is valid for both modes. Experimental results clarify and show the efficacy of the content presented in this paper. [ABSTRACT FROM AUTHOR]

Changes are being implemented in the electrical power grid to accommodate the increased penetration of renewable energy sources interfaced with grid-connected inverters. The grid-forming (GFM) control paradigm of inverters in active power grids has emerged as a technique through which to tackle the effects of the diminishing dominance of synchronous generators (SGs) and is preferred to the grid-following (GFL) control for providing system control and stability in converter-dominated grids. Therefore, the development of the GFM control is important as the grid advances towards 100% inverter-based grids. In this paper, therefore, we aim to review the changing grid scenario; the behaviour of grid-connected inverter control paradigms and major GFM inverter controls, including their modifications to tackle low inertia, reduced power quality, fault-ride through capability, and reduced stability; and the state-of-the-art GFM models that are pushing the universality of GFM inverter control. [ABSTRACT FROM AUTHOR]

The classical problem of islanding detection in distributed generation falls into the commonly used categories known as passive, active, and hybrid techniques. These approaches vary in terms of their accuracy, security, and dependability. Detecting islanding in modern inverter-based distribution systems is of the utmost importance to ensuring the protection of equipment, ensuring the safety of workers, and preventing operational and cascaded faults when the system is specially subjected to renewable integration. This research paper presents a technical comparison of the aforementioned techniques, discussing their detection rate, Non-Detection Zone (NDZ), distinct topologies, and their effectiveness in integration for low-frequency grids. The review offers a thorough analysis comparing the key attributes found in the current literature while also highlighting the forthcoming needs for advanced management, optimization, and control technologies. These technologies are crucial to effectively tackling the difficulties that arise from integrating renewable energy sources into established grid systems. [ABSTRACT FROM AUTHOR]

The inverter module serves as a critical component in the conversion of electrical energy within arc plasma power sources, exerting a profound influence on the overall performance and stability of the power supply. Consequently, the meticulous design and precise control of the inverter module are of paramount importance in ensuring the effective operation and application of arc plasma power sources. This paper introduces a dual-closed-loop control system, integrating a voltage outer loop with a current inner loop, as the cornerstone of its inverter module design. It also undertook a comprehensive comparative analysis of various voltage-control strategies, encompassing four control methods (PI, PID, PR, QPR) and two modulation techniques (bipolar modulation and unipolar, carrier-based modulation) under diverse operating conditions. Additionally, simulation experiments were conducted on a prototype 10 kW inverter module using the Matlab/Simulink simulation platform, with evaluation criteria including waveform tracking performance, voltage waveform distortion rate, and steady-state error. The results indicate that in low-frequency operating conditions, the voltage-control strategy employing QPR control plus unipolar, carrier-based modulation, and in high-frequency operating conditions, the voltage-control strategy utilizing PI control plus unipolar, carrier-based modulation exhibited superior waveform tracking performance. The waveform distortion rates were measured at below 0.47% and 4.2%, respectively, aligning perfectly with the stringent standards of IEEE 519. This research provides valuable theoretical support and practical guidance for future engineering endeavors in the field of inverters. [ABSTRACT FROM AUTHOR]

Introduction. This research paper describes a simple five-level single-phase pulse-width modulated inverter topology for photovoltaic grid applications. Multilevel inverters, as opposed to conventional two-level inverters, include more than two levels of voltage while using multiple power switches and lower-level DC voltage levels as input to produce high power, easier, and less modified oscillating voltage. The H-bridge multilevel inverter seems to have a relatively simple circuit design, needs minimal power switching elements, and provides higher efficiency among various types of topologies for multi-level inverters that are presently accessible. Nevertheless, using more than one DC source for more than three voltage levels and switching and conduction losses, which primarily arise in major power switches, continue to be a barrier. The novelty of the proposed work consists of compact modular inverter configuration to connect a photovoltaic system to the grid with fewer switches. Purpose. The proposed system aims to decrease the number of switches, overall harmonic distortions, and power loss. By producing distortion-free sinusoidal output voltage as the level count rises while lowering power losses, the constituted optimizes power quality without the need for passive filters. Methods. The proposed topology is implemented in MATLAB/Simulink with gating pulses and various pulse width modulation technique. Results. With conventional topology, total harmonic distortion, power switches, output voltage, current, power losses, and the number of DC sources are investigated. Practical value. The proposed topology has proven to be extremely useful for deploying photovoltaic-based stand-alone multilevel inverters in grid applications. [ABSTRACT FROM AUTHOR]

Virtual synchronous generators (VSGs) are one of the most relevant solutions to integrate renewable energy in weak grids and microgrids. They indeed provide inverters characteristics of rotating machines (inertia for instance) that are useful for stabilizing the system, notably in the context of the high variability of the production. Thanks to the virtual characteristics of the VSG, the virtual parameters of the emulated synchronous machine can be optimally adapted online as a function of the electric environment of the inverter. We call that inverter's control a polymorphic VSG. The online adaptation of the critical control parameters of the VSG helps reduce the risk of deterioration of the inverter's constituents that might be induced by harsh events (frequent in weak grids) but, more importantly, improves the robustness of the system. In this paper, four implementations of a polymorphic VSG controller are compared on a simple microgrid study case to a complete VSG model. For the test, polymorphic VSGs have to minimize frequency and voltage oscillations while withstanding short circuits, which is typically a requirement for units in this context. One of the controls is based on recurrent optimization over a prediction time horizon, and two sub-optimal ones target practical implementation in industrial inverters with limited computational power. Results show a clear reduction in incidents in the microgrid thanks to the controllers. The error reduction with the complete polymorphic VSG is up to 100% for the voltage, 32% for the currents, and 79% for the duty ratio. Those values are decreased by 30 to 50% with the sub-optimal controllers but for a reduction in the computational burden of more than 97%. Recommendations are proposed for the development of an auto-adaptive polymorphic VSG from a high technology-readiness-level perspective, i.e., targeting a compromise between error reduction and computational burden. [ABSTRACT FROM AUTHOR]

Industries using electrical power have a critical and pressing need for improved power quality (PQ). Several important problems have already been identified, such as voltage swell, sag, and harmonics. However, PQ fluctuation issues remain unresolved. A series of active power filters are used to shield delicate loads from PQ related problems. This paper present a low-complexity control technique for voltage compensation using a type of custom power device used with different inverter topologies called Dynamic Voltage Restorer (DVR). In this study, a three-phase Z-Source Inverter-based DVR is employed to reduce voltage disruption, including voltage fluctuation, sag, swell, and harmonics. Error-driven Proportional-Integral-Derivative (PID) controller provides higher PQ performance in terms of voltage augmentation, stabilization, and reduction in harmonic distortion in the distribution system. This strategy keeps the load voltage near or close to the nominal value and addresses many other voltage issues. The gain parameter of a PID controller is tuned using Harris Hawks Optimization (HHO) method. The proposed work is compared with traditional controllers as well as Genetic Algorithm-based PID controllers, and the distortion of total harmonics comparisons are also conducted to show the accuracy of the proposed Z-DVR. To demonstrate the effectiveness of the suggested methodology, it is implemented in MATLAB/Simulink R2020a tool and the results of the mitigated sag, swell fluctuation, and total harmonic distortion (THD) are studied. [ABSTRACT FROM AUTHOR]

The control performance of the voltage source inverter will be reduced when it operates under complex microgrid (MG) conditions. Traditionally, problems such as high controller order and complex design may occur when robust control and secondary regulation are adopted for the inverters. Meanwhile, when the conventional adaptive control is adopted, the adaptive gain may be too high, resulting in increased sensitivity of the system to external disturbances. To address the above problems, a novel Narendra‐based adaptive anti‐disturbance control strategy for microgrid voltage source inverter is proposed in this paper. Firstly, a Narendra adaptive‐based controller is constructed, which enables the controller to adaptively adjust the system parameters to change the inverter output voltage quality. Secondly, the extended state observer (ESO) is introduced to observe and suppress the total disturbance of the system, which can make the system less sensitive and ensure the stability of the system operation. Thirdly, according to the Lyapunov stability theory, the Lyapunov function is chosen to prove the global asymptotic stability of the system, and an adaptive law is designed. Finally, the comparative experiment shows that the proposed control strategy based on Narendra adaptive anti‐disturbance can maintain excellent voltage control performance in complex working conditions, and then ensure that the inverter's output voltage always meets power quality standard in complex working conditions. [ABSTRACT FROM AUTHOR]

The conventional proportional-gain-feedback link can only obtain the smallest effective damping region (EDR) due to the control delay among all the active damping methods regarding the capacitor current feedback. The digitally controlled system tends to be unstable when the system resonant frequency reaches the critical frequency caused by the grid impedance variation. To weaken the adverse effect on the system caused by the control delay, phase-lead feedback links are applied along the feedback path to provide phase compensation. By taking the simplicity and reliability of the feedback links into account, this paper proposes an alternative to an ideal differentiator, which consists of the Tustin discrete form of 's' and a digital low-pass filter. This proposed method has an identical phase frequency characteristic as an ideal differentiator but a better magnitude frequency characteristic, and its EDR can reach [0, fs/3]. The system stability analysis is conducted under different resonant frequencies, and under the condition of a weak grid, the co-design approach of the active damper and digital controller is presented. Finally, the experimental results are shown to verify the proposed method. [ABSTRACT FROM AUTHOR]

The cross coupling between receiver coils complicates the control and optimization of "one‐to‐may" multi‐load IPT systems. In this paper, the cross‐coupling effect in a two‐load IPT system is thoroughly discussed. It is noted that the input impedance, the total output power and the power distribution ratio among receivers are all affected. After developing a new leakage‐inductance‐based model considering the cross‐coupling effect, it is suggested that the operating frequency is adjusted according to the cross‐coupling coefficient to ensure a constant power distribution ratio. The total output power and the input impedance are regulated by coordinated adjustment of the inverter's duty cycle and the transmitter‐side compensation capacitance with switched control capacitor (SCC) control. Based on the proposed hybrid control strategy (frequency, duty cycle, and SCC), the power distribution among loads and the total output power are kept constant under variable cross‐coupling coefficient, and the input impedance are shaped to be inductive to achieve zero voltage switching (ZVS) realization for all switches in the inverter. The theoretical analysis is finally verified by experimental results on a 35 W two‐load IPT prototype. [ABSTRACT FROM AUTHOR]

Dead-time is the most important disturbance in a voltage-source inverter's operation. It introduces low-order harmonics at the inverter's output voltage. To compensate for the dead-time effects in three-phase grid-tied inverters, this paper proposes a Linear Quadratic Gaussian (LQG) multivariable control approach. The LQG multivariable control is known as a robust control approach while provides a high band-width for the closed-loop system. Therefore, it promises significant attenuations in the dead-time introduced harmonics. To achieve a high performance, we run the three-phase grid-tied inverter in the current-controlled mode. Based on the nominal multivariable model derived for the three-phase grid-tied inverter in a synchronous reference frame, the LQG controller is composed such that the closed-loop system exhibits robust stability while attenuates disturbances significantly. The dead-time introduced harmonics produce disturbances in the synchronous reference frame with the highest frequencies. This is the reason for considering the dead-time as the most important disturbance in an inverter's operation. For an experimental set-up manufactured for the three-phase grid-tied inverter, we developed a detailed model in MATLAB/Simulink. It is employed for the performance verifications of designed LQG controller. Extensive results are presented for different important scenarios, based on which, the excellent performance of proposed approach is proven. In fact, by employing the proposed approach, the dead-time introduced harmonics are significantly attenuated such that a Total Harmonics Distortions (THD) of about 5% is achieved for the injected currents to grid which meets the IEEE 1547 standard. [ABSTRACT FROM AUTHOR]

High-voltage flexible power systems, with their intrinsic characteristics, play an increasingly important role in electronic power systems. Synchronization between the inverter and the grid needs to be achieved by a phase-locked loop (PLL), the performance of which determines the quality of power transmission. This paper proposes a PLL adapted to extremely harsh grid conditions. Firstly, the traditional synchronous reference frame PLL and the dual second-order generalized integrator (DSOGI-PLL) are analyzed, and the errors in phase-locking and the shortcomings of these two methods in the presence of DC components in the grid are pointed out. Secondly, based on the harmonic grid voltage, a repetitive control internal model is introduced by DSOGI to realize the real-time tracking and regulation of the harmonic signals in order to suppress the harmonic voltage disturbance. In addition, a DC bias elimination and frequency adaptive method is proposed to solve the problems of DC bias and grid voltage frequency fluctuation in order to achieve adaptive tracking of the grid phase. Finally, the superiority of the proposed strategy is verified through simulations and experiments. [ABSTRACT FROM AUTHOR]

In traditional grid-tied photovoltaic (PV) installations, when partial shadowing occurs between different PV modules in a string, bypass diodes short-circuit the output terminals of shadowed modules, and the whole system forgoes their potential energy production. This loss can be recovered if a dc-dc converter (micro-converter) is coupled to every PV module, and operated at the maximum power point (MPP). In this scenario, without communication links between the distributed micro-converter and the grid-tied inverter, a start-up procedure must be carefully designed to seamlessly allow the system to transfer PV power to the grid. During this phase, potentially damaging over-voltages and abrupt transients occurring at the micro-converters/inverter interface must be avoided. In this paper, the control algorithm of each micro-converter is enhanced to provide a smooth start-up operation so that PV units can safely start transferring power to the inverter and the grid. Improving from previous works, the proposed control technique is simple and removes the need for current sensors at the output of each micro-converter and at the inverter dc-link, with an economical advantage. Simulation results demonstrate the successful system start-up behavior, whilst confirming the benefits of the proposed control technique. First, the dc-link is energized from the rectified grid voltage. Then, the micro-converters raise the dc-link voltage so that the available PV power is transferred to the grid, with this sequence of operations not causing any abrupt electrical transient. The results also demonstrate the robust behavior of the PV system under non-uniform solar irradiation conditions. [ABSTRACT FROM AUTHOR]

The droop control strategy is the most common approach for microgrids control but its application is limited due to frequency deviation following a load change. Complementary control strategy has then been proposed to solve the problem using a communication network. However, under this strategy, regular loads profile produces a continuous change of output power of all distributed generators (DGs) and their generation changes seem to be permanent. This also causes continuous data exchange between DGs through communication links. This paper shows the possibility of adapting the droop/isochronous control methodology used by synchronous generators in conventional power systems to provide frequency control and power balance to inverter-based distributed generation power systems. To this end, this paper presents a centralized complementary control framework for the management of power-sharing and sustaining frequency in its nominal range in microgrids using a hybrid droop-isochronous control system. The proposed method is event-triggered based and communication between DGs is only needed when the output power of the isochronous generator exceeds its power limits. The method provides an efficient and reliable control system and has a simple concept, easy, and costeffective implementation. Simulations in MATLAB/SimPower are performed on a typical microgrid under various conditions to evaluate the performance of the proposed controller. [ABSTRACT FROM AUTHOR]

Photovoltaic (PV) energy systems have found diverse applications in fulfilling the increasing energy demand worldwide. Transformer-less PV inverters convert the DC energy from PV systems to AC energy and deliver it to the grid through a non-isolated connection. This paper proposes a new transformer-less grid-connected PV inverter. A closed-loop control scheme is presented for the proposed transformer-less inverter to connect it with the power grid. The proposed transformer-less inverter reduces extra leakage current and holds the common-mode voltage at a constant point. To eliminate extra leakage current, as well as achieve constant common-mode voltage, a midpoint clamping method is utilized to operate the inverter. The proposed transformer-less inverter is formed of seven insulated gate bipolar transistors (IGBTs) employing a unipolar sinusoidal pulse width modulation (SPWM) technique for switching purposes. An LCL filter is employed to reshape the two-level inverter output voltage and current to obtain closer sinusoidal waveforms. The output voltage and current total harmonic distortion (THD) of the proposed transformer-less inverter were found to be 1.25% and 0.94%, respectively, in the grid-connected mode. The leakage current elimination mechanism with the proposed transformer-less inverter is deeply analyzed in this paper. The performances of the proposed transformer-less inverter were evaluated with MATLAB/Simulink simulation and validated in a laboratory scale experiment. [ABSTRACT FROM AUTHOR]

In this paper, a bidirectional converter with multi-mode control strategies is proposed for a battery energy storage system (BESS). This proposed converter, which is composed of a half-bridge-type dual-active-bridge (HBDAB) converter and an H-bridge inverter, is able to operate the BESS with different power conditions and achieve the DC–AC function for lower input DC voltage applications. For the HBDAB converter, the variable-frequency control (VFC) and phase-shift control (PSC) are both adopted to achieve zero-voltage switching over a wider power range and the battery module balance control capability for BESS, respectively. In addition, the interleaved configuration is used to reduce the current ripple and increase the overall current rating. For the H-bridge inverter, the unipolar control mode (UCM) and totem-pole control mode (TPCM) are adopted to manage the real and reactive current control under different AC grid conditions. The UCM offers a reduction in current ripple for real and reactive power control. The TPCM is able to eliminate switching losses and achieve higher conversion efficiency for pure real power control. Considering applications for battery energy storage systems, the principle of operation and voltage gain analysis are described. Finally, computer simulations and hardware experimental results from a prototype system are presented to verify the performance of the proposed converter with the different control strategies. [ABSTRACT FROM AUTHOR]

In this paper, the method and a control algorithm for detecting resonant destruction of a resonant auxiliary power supply for railway vehicle are proposed. It is essential to reduce the weight of the electric equipment attached to the lower part of the railway vehicle because it greatly affects the life of the railway vehicle, such as wheel and bearing. In order to reduce the weight and volume of the auxiliary power supply, in the case of windings, high-speed switching should be performed by lowering the input voltage. Therefore, in this paper, the auxiliary power supply control algorithm using an LLC resonant converter to reduce the weight of auxiliary power supply for railway vehicle is proposed, and the method of detecting resonant destruction due to device failure of a resonant converter is proposed. The proposed algorithm steps down the wire voltage using an input buck converter for high-speed switching, and the inverter input voltage is controlled through the LLC resonant converter. In addition, ZVS (Zero Voltage Switching) is operated to minimize the loss of the resonant converter, and the optimal design of the resonant tank is also proposed. In order to detect resonant destruction, a detection method formulated by analyzing the resonant current peak value for the load capacity is proposed. The algorithm proposed in this paper is verified by simulation and experiment. [ABSTRACT FROM AUTHOR]