Search

This paper investigates a Vienna rectifier as a charger for series-connected battery packs. Focusing on carrier-based pulsewidth modulation (CBPWM), the ripple current flowing through the neutral point (NP) results in the voltage oscillation if the loads are resistive. To reduce the ripple of average NP current with mitigated distortion under balanced and unbalanced dc-link voltages conditions, a novel CBPWM with segmented component injection scheme (SCIS) is proposed in this paper. After dc component injection, continuous intervals for optimized component injection and clamping intervals for compensation component injection are identified. Optimized components are calculated originally based on unbalanced factor to make the average NP current zero-size in one switching period. Moreover, unique compensation components generate suitable NP current to shape the sinusoidal input currents according to the circuit analysis. In consequence, the SCIS not only keeps the input current with low-harmonic distortion, but also minimizes the oscillation of dc-link voltage under balanced and unbalanced conditions. In addition, the value of the NP current during the clamping intervals is analyzed under various operating conditions. The effectiveness and the performance of the proposed SCIS are verified by simulation and experiments. [ABSTRACT FROM AUTHOR]

This paper proposes a generalized design framework for three-phase Vienna rectifiers to handle the neutral point voltage balance issue. On the basis of the design framework, it is convenient to construct various neutral point voltage balancing methods with the guarantee of stability. As demonstration, three representative neutral point voltage balance approaches are presented by choosing different zero-sequence voltages. A comprehensive comparison among the three approaches is given in the aspects of input current quality, capacitor voltage fluctuation, and system efficiency. The comparison results provide guidance for constructing the most appropriate approach based on the specific requirement. Finally, simulation and experimental results verify the correctness and effectiveness of the presented approaches and the related performance analysis. [ABSTRACT FROM AUTHOR]

The VIENNA rectifier is increasingly being considered as the active front-end converter in many applications that do not require regeneration or controllable input reactive power. In such applications, this rectifier is normally operated at unity source displacement factor, which derates its nominal voltampere (VA) rating. Moreover, in the “source voltage oriented” reference frame that is normally used for control, this rectifier has complex operating limits on the rectifier terminal voltage (imposed by the operating conditions), which needs to be computed online to avoid the line currents from going through zero-crossing distortions. Also, the source voltage has to be either measured or estimated, which further increases the cost and/or computational burden. This paper proposes a control method that eliminates the requirement of the input voltage sensors (or estimators) and makes the limits on the rectifier terminal voltage far simpler to compute. The control method is implemented in the input line current oriented reference frame, considering unity displacement factor at the rectifier input terminals, which minimizes the VA rating of the rectifier (for a given rated load power). The proposed sensorless current-oriented control approach is compared with the conventional voltage-oriented control strategy through experimental results. [ABSTRACT FROM AUTHOR]

Finite control set model predictive control (FCS-MPC) has been widely used in the control of grid-connected converters with the advantages of fast dynamics, multi-objective control, and easy implement. However, the conventional FCSMPC bears with variable switching frequency, high current ripple and computational burden. An improved current model predictive with the cost function-based modulation scheme (CFM-MPC) is proposed for a three-phase three-level VIENNA rectifier to improve the power quality. First, the mathematical model and voltage vector are given according to the principle of deadbeat control. Then, the voltage vector of different voltage vectors are selected according to the location of the voltage vector reference, and the switching action time of the selected are directly calculated by the inversely proportional with cost function value of the selected vectors. It remains the merits of both the conventional MPC and space vector pulse width modulation schemes to track the optimum voltage vector without increasing the computational burden. Finally, a comparative study with the proposed CFM-MPC and conventional FCS-MPC has been conducted to verify the superiority of the proposed scheme. The results show the proposed CFM-MPC has the advantages of lower power ripple, fixed switching frequency, lower total harmonic distortion and neutral point potential balance. [ABSTRACT FROM AUTHOR]

The objective of this study is to create a nonlinear control system designed for a Vienna converter-connected five-phase aerogenerator. The control strategy will be based on the space vector pulse width modulation (SVPWM) technique, which is more suitable for controlling rectifier switches. Due to the higher complexity of the five-phase permanent magnet synchronous generator (PMSG) machine than the conventional three-phase generator, it poses a difficult control problem requiring an advanced mathematical model. Integrating an aerogenerator with a Vienna converter enhances efficiency and power quality. The primary purpose of this study is to develop a nonlinear controller utilizing the retrogression control strategy alongside the SVPWM approach. Furthermore, a speed optimizer based on an artificial neural network is implemented to improve the system’s overall efficiency and meet multiple objectives. The proposed control system improves the overall operation and efficiency of Vienna’s integrated wind turbine and rectifier system. [ABSTRACT FROM AUTHOR]

This article proposes a harmonic voltage injection pulsewidth modulation (PWM) method for a Vienna rectifier with an LCL filter. Existing PWM methods for Vienna rectifiers with full power factor can lead to resonance problems. It generates current oscillation at the resonant frequency. It is analyzed that why the resonance problem occurs in Vienna rectifier with the existing PWM methods. To solve these resonance problems, the proposed method injects a sinusoidal harmonic voltage into the sinusoidal reference voltage. The magnitude and phase of the injection voltage are determined by the power factor of the rectifier-side. Compared to other PWM methods, the proposed PWM method eliminates the possibility of resonant problems. Considering the operation characteristics of the proposed PWM method, this article suggests a design process for an LCL filter. The effectiveness and performance of the proposed PWM method and the design process for an LCL filter are verified by simulation and experiment. [ABSTRACT FROM AUTHOR]

Compared with continuous pulsewidth modulation (PWM), discontinuous PWM (DPWM) is a preferred solution in high-frequency Vienna-type rectifiers due to its inherent characteristics of less commutation number and higher efficiency. In this article, redundant clamping modes at the same subsector with opposite effects on the neutral point (NP) voltage are presented. Then, a modified DPWM (MDPWM) scheme is proposed to regulate the NP voltage by using redundant clamping modes. Thus, the NP voltage can be controlled in each switching period to lower the NP voltage fluctuation. The implementation of the proposed MDPWM is given with variable power factors analysis. Further, the switching loss comparison of conventional space vector PWM (SVPWM), hybrid DPWM (HDPWM), and proposed MDPWM is presented as well. A simulation model was built to verify the proposed NP voltage balance with different modulation indices and variable power factors. Finally, a 10-kW prototype is built to evaluate the proposed MDPWM scheme at conversion efficiency and current total harmonic distortion (THD). Experimental results and analysis show that comparing conventional SVPWM and HDPWM, the efficiency of MDPWM is the highest. The THD of DPWM is slightly higher than that of SVPWM, and it is only 2.5% at rated output power. [ABSTRACT FROM AUTHOR]

Vienna rectifier, which is a nongenerative-boost-type rectifier, is widely used in industrial applications, such as wind turbine systems. However, the Vienna rectifier will face the challenge of reducing common-mode voltage (CMV), maintaining the sinusoidal input currents, and balancing neutral-point (NP) voltage in practice. As these issues are mutually coupled, the conventional space vector modulation (SVM) and various types of enhanced schemes cannot solve these problems properly, especially under nonunity power factor operation. To overcome these limitations, a two-layer pulsewidth modulation scheme through vector selection is developed. In the first layer of the proposed strategy, the NP voltage oscillations are mitigated by adjusting the switching sequence and dwell time of large, medium, small, and zero vectors with reduced CMV as the same in large, medium, and zero vector modulation. In the second layer of the proposed strategy, the switching states are reselected, and the dwell times are real time adjusted to eliminate the distortions in input currents. Through the aforementioned two-layer control method, CMV reduction, input current distortion elimination, and NP voltage balancing in Vienna rectifier can be realized simultaneously. The correctness and effectiveness of the proposed SVM method are verified by the experiment. [ABSTRACT FROM AUTHOR]

This study presents two methods of controlling neutral-point voltage oscillation in a hybrid VIENNA rectifier, which is composed of the parallel association of a three-phase single-switch Boost rectifier with a VIENNA-type rectifier. The neutralpoint oscillation reason has been analysed with a mathematical model. Meanwhile, the two neutral-point control methods of a simplified method based on a zero-sequence component injection and a dual-carrier pulse-width modulation (PWM) method are proposed to control the voltage deviation of the split DC-link and three-time fundamental frequency neutral-point voltage fluctuation with a decrease from ±1.6 to ±1 V, respectively. Moreover, the significant oscillation in the neutral-point voltage caused by unbalanced loads or asymmetric capacitor parameters can also be effectively suppressed by using the dual-carrier PWM method. Furthermore, the performance comparison between these two methods is provided. The experimental results show that the system after being introduced the proposed two methods still exhibits a low-order input current harmonic such as second, third, and fourth harmonics as well as the input current total harmonic distortion is lower than the standard 5%. [ABSTRACT FROM AUTHOR]