Search

Quantifying the impact of a scholarly paper is of great significance, yet the effect of geographical distance of cited papers has not been explored. In this paper, we examine 30,596 papers published in Physical Review C, and identify the relationship between citations and geographical distances between author affiliations. Subsequently, a relative citation weight is applied to assess the impact of a scholarly paper. A higher-order weighted quantum PageRank algorithm is also developed to address the behavior of multiple step citation flow. Capturing the citation dynamics with higher-order dependencies reveals the actual impact of papers, including necessary self-citations that are sometimes excluded in prior studies. Quantum PageRank is utilized in this paper to help differentiating nodes whose PageRank values are identical. [ABSTRACT FROM AUTHOR]

Mixed models: Models allowing for continuous heterogeneity by assuming that value of one or more parameters follow a specified distribution have become increasingly popular. This is known as ‘mixing’ parameters, and it is standard practice by researchers - and the default option in many statistical programs - to base test statistics for mixed models on simulations using asymmetric draws (e.g. Halton draws). Problem 1: Inconsistent LR tests due to asymmetric draws:: This paper shows that when the estimated likelihood functions depend on standard deviations of mixed parameters this practice is very likely to cause misleading test results for the number of draws usually used today. The paper illustrates that increasing the number of draws is a very inefficient solution strategy requiring very large numbers of draws to ensure against misleading test statistics. The main conclusion of this paper is that the problem can be solved completely by using fully antithetic draws, and that using one dimensionally antithetic draws is not enough to solve the problem. Problem 2: Maintaining the correct dimensions when reducing the mixing distribution:: A second point of the paper is that even when fully antithetic draws are used, models reducing the dimension of the mixing distribution must replicate the relevant dimensions of the quasi-random draws in the simulation of the restricted likelihood. Again this is not standard in research or statistical programs. The paper therefore recommends using fully antithetic draws replicating the relevant dimensions of the quasi-random draws in the simulation of the restricted likelihood and that this should become the default option in statistical programs. JEL classification: C15; C25. [ABSTRACT FROM AUTHOR]

Ensembles are a well established machine learning paradigm, leading to accurate and robust models, predominantly applied to predictive modeling tasks. Ensemble models comprise a finite set of diverse predictive models whose combined output is expected to yield an improved predictive performance as compared to an individual model. In this paper, we propose a new method for learning ensembles of process-based models of dynamic systems. The process-based modeling paradigm employs domain-specific knowledge to automatically learn models of dynamic systems from time-series observational data. Previous work has shown that ensembles based on sampling observational data (i.e., bagging and boosting), significantly improve predictive performance of process-based models. However, this improvement comes at the cost of a substantial increase of the computational time needed for learning. To address this problem, the paper proposes a method that aims at efficiently learning ensembles of process-based models, while maintaining their accurate long-term predictive performance. This is achieved by constructing ensembles with sampling domain-specific knowledge instead of sampling data. We apply the proposed method to and evaluate its performance on a set of problems of automated predictive modeling in three lake ecosystems using a library of process-based knowledge for modeling population dynamics. The experimental results identify the optimal design decisions regarding the learning algorithm. The results also show that the proposed ensembles yield significantly more accurate predictions of population dynamics as compared to individual process-based models. Finally, while their predictive performance is comparable to the one of ensembles obtained with the state-of-the-art methods of bagging and boosting, they are substantially more efficient. [ABSTRACT FROM AUTHOR]

The dispatching of hydro-thermal system is a nonlinear programming problem with multiple constraints and high dimensions and the solution techniques of the model have been a hotspot in research. Based on the advantage of that the artificial bee colony algorithm (ABC) can efficiently solve the high-dimensional problem, an improved artificial bee colony algorithm has been proposed to solve DHTS problem in this paper. The improvements of the proposed algorithm include two aspects. On one hand, local search can be guided in efficiency by the information of the global optimal solution and its gradient in each generation. The global optimal solution improves the search efficiency of the algorithm but loses diversity, while the gradient can weaken the loss of diversity caused by the global optimal solution. On the other hand, inspired by genetic algorithm, the nectar resource which has not been updated in limit generation is transformed to a new one by using selection, crossover and mutation, which can ensure individual diversity and make full use of prior information for improving the global search ability of the algorithm. The two improvements of ABC algorithm are proved to be effective via a classical numeral example at last. Among which the genetic operator for the promotion of the ABC algorithm’s performance is significant. The results are also compared with those of other state-of-the-art algorithms, the enhanced ABC algorithm has general advantages in minimum cost, average cost and maximum cost which shows its usability and effectiveness. The achievements in this paper provide a new method for solving the DHTS problems, and also offer a novel reference for the improvement of mechanism and the application of algorithms. [ABSTRACT FROM AUTHOR]

Motivated by the work of Dahrouj and Yu in applying the Han-Kobayashi transmission strategy for mitigating the intercell interference in a multi-cell multi-user multiple-input single-output interference network (MISO IN), this paper considers splitting messages into private and common parts in a multi-cell multi-user MIMO IN. Specifically, the covariances of the private messages and common messages are designed to optimize either the sum rate or the minimal rate. The common messages and private messages are decoded in sequence using successive decoding. This paper shows how these difficult optimization problems can be adequately solved by means of d.c. (difference of concave functions) optimization over a simple convex set. Numerical and simulation results also reveal the great advantage of our proposed solutions for various types of INs. In particular, the proposed solutions are shown to outperform the algorithm developed by Dahrouj and Yu for the simpler case of the MISO IN. [ABSTRACT FROM PUBLISHER]

With the development of computer network bandwidth, packet classification algorithms which are able to deal with large-scale rule sets are in urgent need. Among the existing algorithms, researches on packet classification algorithms based on hierarchical trie have become an important packet classification research branch because of their widely practical use. Although hierarchical trie is beneficial to save large storage space, it has several shortcomings such as the existence of backtracking and empty nodes. This paper proposes a new packet classification algorithm, Hierarchical Trie Algorithm Based on Expectation-Maximization Clustering (HTEMC). Firstly, this paper uses the formalization method to deal with the packet classification problem by means of mapping the rules and data packets into a two-dimensional space. Secondly, this paper uses expectation-maximization algorithm to cluster the rules based on their aggregate characteristics, and thereby diversified clusters are formed. Thirdly, this paper proposes a hierarchical trie based on the results of expectation-maximization clustering. Finally, this paper respectively conducts simulation experiments and real-environment experiments to compare the performances of our algorithm with other typical algorithms, and analyzes the results of the experiments. The hierarchical trie structure in our algorithm not only adopts trie path compression to eliminate backtracking, but also solves the problem of low efficiency of trie updates, which greatly improves the performance of the algorithm. [ABSTRACT FROM AUTHOR]

Multi-robot task allocation is one of the main problems to address in order to design a multi-robot system, very especially when robots form coalitions that must carry out tasks before a deadline. A lot of factors affect the performance of these systems and among them, this paper is focused on the physical interference effect, produced when two or more robots want to access the same point simultaneously. To our best knowledge, this paper presents the first formal description of multi-robot task allocation that includes a model of interference. Thanks to this description, the complexity of the allocation problem is analyzed. Moreover, the main contribution of this paper is to provide the conditions under which the optimal solution of the aforementioned allocation problem can be obtained solving an integer linear problem. The optimal results are compared to previous allocation algorithms already proposed by the first two authors of this paper and with a new method proposed in this paper. The results obtained show how the new task allocation algorithms reach up more than an 80% of the median of the optimal solution, outperforming previous auction algorithms with a huge reduction of the execution time. [ABSTRACT FROM AUTHOR]

This paper deals with undiscounted infinite stage two-person zero-sum stochastic games with finite state and action spaces. It was recently shown that such games possess a value. But in general there are no optimal strategies. We prove that for each player there exists a nonempty set of easy initial states, i.e. starting states for which the player possesses an optimal stationary strategy. This result is proved with the aid of facts derived by Bewley and Kohlberg for the limit discount equation for stochastic games. [ABSTRACT FROM AUTHOR]

In the theory of belief functions, the approximation of a basic belief assignment (BBA) is for reducing the high computational cost especially when large number of focal elements are available. In traditional BBA approximation approaches, a focal element’s own characteristics such as the mass assignment and the cardinality, are usually used separately or jointly as criteria for the removal of focal elements. Besides the computational cost, the distance between the original BBA and the approximated one is also concerned, which represents the loss of information in BBA approximation. In this paper, an iterative approximation approach is proposed based on maximizing the closeness, i.e., minimizing the distance between the approximated BBA in current iteration and the BBA obtained in the previous iteration, where one focal element is removed in each iteration. The iteration stops when the desired number of focal elements is reached. The performance evaluation approaches for BBA approximations are also discussed and used to compare and evaluate traditional BBA approximations and the newly proposed one in this paper, which include traditional time-based way, closeness-based way and new proposed ones. Experimental results and related analyses are provided to show the rationality and efficiency of our proposed new BBA approximation. [ABSTRACT FROM AUTHOR]

Radio propagation prediction simulation methods based on deterministic technique such as ray launching is extensively used to accomplish radio channel characterization. However, the superiority of the simulation depends on the number of rays launched and received. This paper presented the indoor three-dimensional (3D) Minimum Ray Launching Maximum Accuracy (MRLMA) technique, which is applicable for an efficient indoor radio wave propagation prediction. Utilizing the novel MRLMA technique in the simulation environment for ray lunching and tracing can drastically reduce the number of rays that need to be traced, and improve the efficiency of ray tracing. Implementation and justification of MRLMA presented in the paper. An indoor office 3D layouts are selected and simulations have been performed using the MRLMA and other reference techniques. Results showed that the indoor 3D MRLMA model is appropriate for wireless communications network systems design and optimization process with respect to efficiency, coverage, number of rays launching, number of rays received by the mobile station, and simulation time. [ABSTRACT FROM AUTHOR]

This paper investigates an improved genetic algorithm on multiple automated guided vehicle (multi-AGV) path planning. The innovations embody in two aspects. First, three-exchange crossover heuristic operators are used to produce more optimal offsprings for getting more information than with the traditional two-exchange crossover heuristic operators in the improved genetic algorithm. Second, double-path constraints of both minimizing the total path distance of all AGVs and minimizing single path distances of each AGV are exerted, gaining the optimal shortest total path distance. The simulation results show that the total path distance of all AGVs and the longest single AGV path distance are shortened by using the improved genetic algorithm. [ABSTRACT FROM AUTHOR]

This paper proposed a method to update the on-line health reference baseline of the On-Board Engine Model (OBEM) to maintain the effectiveness of an in-flight aircraft sensor Fault Detection and Isolation (FDI) system, in which a Hybrid Kalman Filter (HKF) was incorporated. Generated from a rapid in-flight engine degradation, a large health condition mismatch between the engine and the OBEM can corrupt the performance of the FDI. Therefore, it is necessary to update the OBEM online when a rapid degradation occurs, but the FDI system will lose estimation accuracy if the estimation and update are running simultaneously. To solve this problem, the health reference baseline for a nonlinear OBEM was updated using the proposed channel controller method. Simulations based on the turbojet engine Linear-Parameter Varying (LPV) model demonstrated the effectiveness of the proposed FDI system in the presence of substantial degradation, and the channel controller can ensure that the update process finishes without interference from a single sensor fault. [ABSTRACT FROM AUTHOR]

Recently the integrated modular avionics (IMA) architecture has been widely adopted by the avionics industry due to its strong partition mechanism. Although the IMA architecture can achieve effective cost reduction and reliability enhancement in the development of avionics systems, it results in a complex allocation and scheduling problem. All partitions in an IMA system should be integrated together according to a proper schedule such that their deadlines will be met even under the worst case situations. In order to help provide a proper scheduling table for all partitions in IMA systems, we study the schedulability of independent partitions on a multiprocessor platform in this paper. We firstly present an exact formulation to calculate the maximum scaling factor and determine whether all partitions are schedulable on a limited number of processors. Then with a Game Theory analogy, we design an approximation algorithm to solve the scheduling problem of partitions, by allowing each partition to optimize its own schedule according to the allocations of the others. Finally, simulation experiments are conducted to show the efficiency and reliability of the approach proposed in terms of time consumption and acceptance ratio. [ABSTRACT FROM AUTHOR]

The problem in this paper is motivated by physical problems concerned with the case when a class of continuous and equimeasurable densities of a string is given then how to find minimal frequencies among these given densities, that is, what kind of densities minimize the frequencies. By taking Dirichlet eigenvalues into account, given a certain weight function ω, we will show the minimizer of the mth eigenvalue is the m-degree continuous symmetrical decreasing rearrangement of ω. The main result of this paper can be viewed as complementary to Schwarz’s work (Schwarz in J. Math. Mech. 10:401-422, 1961). [ABSTRACT FROM AUTHOR]

Generating synthetic baseline populations is a fundamental step of agent-based modeling and simulation, which is growing fast in a wide range of socio-economic areas including transportation planning research. Traditionally, in many commercial and non-commercial microsimulation systems, the iterative proportional fitting (IPF) procedure has been used for creating the joint distribution of individuals when combining a reference joint distribution with target marginal distributions. Although IPF is simple, computationally efficient, and rigorously founded, it is unclear whether IPF well preserves the dependence structure of the reference joint table sufficiently when fitting it to target margins. In this paper, a novel method is proposed based on the copula concept in order to provide an alternative approach to the problem that IPF resolves. The dependency characteristic measures were computed and the results from the proposed method and IPF were compared. In most test cases, the proposed method outperformed IPF in preserving the dependence structure of the reference joint distribution. [ABSTRACT FROM AUTHOR]

Information carried by an image can be distorted due to different image processing steps introduced by different electronic means of storage and communication. Therefore, development of algorithms which can automatically assess a quality of the image in a way that is consistent with human evaluation is important. In this paper, an approach to image quality assessment (IQA) is proposed in which the quality of a given image is evaluated jointly by several IQA approaches. At first, in order to obtain such joint models, an optimisation problem of IQA measures aggregation is defined, where a weighted sum of their outputs, i.e., objective scores, is used as the aggregation operator. Then, the weight of each measure is considered as a decision variable in a problem of minimisation of root mean square error between obtained objective scores and subjective scores. Subjective scores reflect ground-truth and involve evaluation of images by human observers. The optimisation problem is solved using a genetic algorithm, which also selects suitable measures used in aggregation. Obtained multimeasures are evaluated on four largest widely used image benchmarks and compared against state-of-the-art full-reference IQA approaches. Results of comparison reveal that the proposed approach outperforms other competing measures. [ABSTRACT FROM AUTHOR]

As defined by IEEE 802.15.6 standard, channel sharing is a potential method to coordinate inter-network interference among Medical Body Area Networks (MBANs) that are close to one another. However, channel sharing opens up new vulnerabilities as selfish MBANs may manipulate their online channel requests to gain unfair advantage over others. In this paper, we address this issue by proposing a truthful online channel sharing algorithm and a companion protocol that allocates channel efficiently and truthfully by punishing MBANs for misreporting their channel request parameters such as time, duration and bid for the channel. We first present an online channel sharing scheme for unit-length channel requests and prove that it is truthful. We then generalize our model to settings with variable-length channel requests, where we propose a critical value based channel pricing and preemption scheme. A bid adjustment procedure prevents unbeneficial preemption by artificially raising the ongoing winner’s bid controlled by a penalty factor λ. Our scheme can efficiently detect selfish behaviors by monitoring a trust parameter α of each MBAN and punish MBANs from cheating by suspending their requests. Our extensive simulation results show our scheme can achieve a total profit that is more than 85% of the offline optimum method in the typical MBAN settings. [ABSTRACT FROM AUTHOR]

We describe in this paper the experimental procedure, the data treatment and the quantification of the black body correction: an experimental approach to compensate for scattering and systematic biases in quantitative neutron imaging based on experimental data. The correction algorithm is based on two steps; estimation of the scattering component and correction using an enhanced normalization formula. The method incorporates correction terms into the image normalization procedure, which usually only includes open beam and dark current images (open beam correction). Our aim is to show its efficiency and reproducibility: we detail the data treatment procedures and quantitatively investigate the effect of the correction. Its implementation is included within the open source CT reconstruction software MuhRec. The performance of the proposed algorithm is demonstrated using simulated and experimental CT datasets acquired at the ICON and NEUTRA beamlines at the Paul Scherrer Institut. [ABSTRACT FROM AUTHOR]

Among traditional Light Detection And Ranging (LIDAR) data representations such as raster grid, triangulated irregular network, point clouds and octree, the explicit 3D nature of voxel-based representation makes it a promising alternative. Despite the benefit of voxel-based representation, voxel-based algorithms have rarely been used for building detection. In this paper, a voxel segmentation-based 3D building detection algorithm is developed for separating building and nonbuilding voxels. The proposed algorithm first voxelizes the LIDAR point cloud into a grayscale voxel structure in which the grayscale of the voxel corresponds to the quantized mean intensity of the LIDAR points within the voxel. The voxelized dataset is segmented into multiple 3D-connected regions depending on the connectivity and grayscale similarity among voxels. The 3D-connected regions corresponding to the building roof and facade are detected sequentially according to characteristics such as their area, density, elevation difference and location. The obtained results for the detected buildings are evaluated by the LIDAR data provided by working group III/4 of ISPRS, which demonstrate a high rate of success. Average completeness, correctness, quality, and kappa coefficient indexes values of 90.0%, 96.0%, 88.1% and 88.7%, respectively, are obtained for buildings. [ABSTRACT FROM AUTHOR]

The current marketing landscape, apart from conventional approaches, consists of campaigns designed especially for launching information diffusion processes within online networks. Associated research is focused on information propagation models, campaign initialization strategies and factors affecting campaign dynamics. In terms of algorithms and performance evaluation, the final coverage represented by the fraction of activated nodes within a target network is usually used. It is not necessarily consistent with the real marketing campaigns using various characteristics and parameters related to coverage, costs, behavioral patterns and time factors for overall evaluation. This paper presents assumptions for a decision support system for multi-criteria campaign planning and evaluation with inputs from agent-based simulations. The results, which are delivered from a simulation model based on synthetic networks in a form of decision scenarios, are verified within a real network. Last, but not least, the study proposes a multi-objective campaign evaluation framework with several campaign evaluation metrics integrated. The results showed that the recommendations generated with the use of synthetic networks applied to real networks delivered results according to the decision makers’ expectation in terms of the used evaluation criteria. Apart from practical applications, the proposed multi-objective approach creates new evaluation possibilities for theoretical studies focused on information spreading processes within complex networks. [ABSTRACT FROM AUTHOR]

Ellipse fitting is a highly researched and mature topic. Surprisingly, however, no existing method has thus far considered the data point eccentricity in its ellipse fitting procedure. Here, we introduce the concept of eccentricity of a data point, in analogy with the idea of ellipse eccentricity. We then show empirically that, irrespective of ellipse fitting method used, the root mean square error (RMSE) of a fit increases with the eccentricity of the data point set. The main contribution of the paper is based on the hypothesis that if the data point set were pre-processed to strategically add additional data points in regions of high eccentricity, then the quality of a fit could be improved. Conditional validity of this hypothesis is demonstrated mathematically using a model scenario. Based on this confirmation we propose an algorithm that pre-processes the data so that data points with high eccentricity are replicated. The improvement of ellipse fitting is then demonstrated empirically in real-world application of 3D reconstruction of a plant root system for phenotypic analysis. The degree of improvement for different underlying ellipse fitting methods as a function of data noise level is also analysed. We show that almost every method tested, irrespective of whether it minimizes algebraic error or geometric error, shows improvement in the fit following data augmentation using the proposed pre-processing algorithm. [ABSTRACT FROM AUTHOR]

Spatial correlation between densely deployed sensor nodes in a wireless sensor network (WSN) can be exploited to reduce the power consumption through a proper source coding mechanism such as distributed source coding (DSC). In this paper, we propose the Decoding Delay-based Distributed Source Coding (D-DSC) to improve the energy efficiency of the classical DSC by employing the decoding delay concept which enables the use of the maximum correlated portion of sensor samples during the event estimation. In D-DSC, network is partitioned into clusters, where the clusterheads communicate their uncompressed samples carrying the side information, and the cluster members send their compressed samples. Sink performs joint decoding of the compressed and uncompressed samples and then reconstructs the event signal using the decoded sensor readings. Based on the observed degree of the correlation among sensor samples, the sink dynamically updates and broadcasts the varying compression rates back to the sensor nodes. Simulation results for the performance evaluation reveal that D-DSC can achieve reliable and energy-efficient event communication and estimation for practical signal detection/estimation applications having massive number of sensors towards the realization of Internet of Sensing Things (IoST). [ABSTRACT FROM AUTHOR]

Reactive navigation is a well-known paradigm for controlling an autonomous mobile robot, which suggests making all control decisions through some light processing of the current/recent sensor data. Among the many advantages of this paradigm are: 1) the possibility to apply it to robots with limited and low-priced hardware resources, and 2) the fact of being able to safely navigate a robot in completely unknown environments containing unpredictable moving obstacles. As a major disadvantage, nevertheless, the reactive paradigm may occasionally cause robots to get trapped in certain areas of the environment—typically, these conflicting areas have a large concave shape and/or are full of closely-spaced obstacles. In this last respect, an enormous effort has been devoted to overcome such a serious drawback during the last two decades. As a result of this effort, a substantial number of new approaches for reactive navigation have been put forward. Some of these approaches have clearly improved the way how a reactively-controlled robot can move among densely cluttered obstacles; some other approaches have essentially focused on increasing the variety of obstacle shapes and sizes that could be successfully circumnavigated; etc. In this paper, as a starting point, we choose the best existing reactive approach to move in densely cluttered environments, and we also choose the existing reactive approach with the greatest ability to circumvent large intricate-shaped obstacles. Then, we combine these two approaches in a way that makes the most of them. From the experimental point of view, we use both simulated and real scenarios of challenging complexity for testing purposes. In such scenarios, we demonstrate that the combined approach herein proposed clearly outperforms the two individual approaches on which it is built. [ABSTRACT FROM AUTHOR]

Haptics applications such as surgery simulations require collision detections that are more precise than others. An efficient collision detection method based on the clustering of bounding spheres was proposed in our prior study. This paper analyzes and compares the applied effects of the five most common subdivision surface methods on some 3D models for haptic collision detection. The five methods are Butterfly, Catmull-Clark, Mid-point, Loop, and LS3 (Least Squares Subdivision Surface). After performing a number of experiments, we have concluded that LS3 method is the most appropriate for haptic simulations. The more we applied surface subdivision, the more the collision detection results became precise. However, it is observed that the performance becomes better until a certain threshold and degrades afterward. In order to reduce the performance degradation, we adopted our prior work, which was the fast and precise collision detection method based on adaptive clustering. As a result, we obtained a notable improvement of the speed of collision detection. [ABSTRACT FROM AUTHOR]

In this paper, an algorithm that acquires the intermediate goals between the initial and goal states is proposed for an agent executing multiple tasks. We demonstrate the algorithm in the problem of rearranging multiple objects. The result shows that the moving distance to transfer the entire objects to their goal configuration is 1/15 of that without using intermediate goals. We experiment using a real robot to confirm that the intermediate goal can be adapted to a real environment. Our experimental results showed that an agent could adapt the intermediate goals, which were acquired in the simulation, to the experimental environment. [ABSTRACT FROM AUTHOR]

In this paper we consider the problem of restoration of a image contaminated by a mixture of Gaussian and impulse noises. We propose a new statistic called ROADGI which improves the well-known Rank-Ordered Absolute Differences (ROAD) statistic for detecting points contaminated with the impulse noise in this context. Combining ROADGI statistic with the method of weights optimization we obtain a new algorithm called Optimal Weights Mixed Filter (OWMF) to deal with the mixed noise. Our simulation results show that the proposed filter is effective for mixed noises, as well as for single impulse noise and for single Gaussian noise. [ABSTRACT FROM AUTHOR]

The estimation of the correct number of dimensions is a long-standing problem in psychometrics. Several methods have been proposed, such as parallel analysis (PA), Kaiser-Guttman’s eigenvalue-greater-than-one rule, multiple average partial procedure (MAP), the maximum-likelihood approaches that use fit indexes as BIC and EBIC and the less used and studied approach called very simple structure (VSS). In the present paper a new approach to estimate the number of dimensions will be introduced and compared via simulation to the traditional techniques pointed above. The approach proposed in the current paper is called exploratory graph analysis (EGA), since it is based on the graphical lasso with the regularization parameter specified using EBIC. The number of dimensions is verified using the walktrap, a random walk algorithm used to identify communities in networks. In total, 32,000 data sets were simulated to fit known factor structures, with the data sets varying across different criteria: number of factors (2 and 4), number of items (5 and 10), sample size (100, 500, 1000 and 5000) and correlation between factors (orthogonal, .20, .50 and .70), resulting in 64 different conditions. For each condition, 500 data sets were simulated using lavaan. The result shows that the EGA performs comparable to parallel analysis, EBIC, eBIC and to Kaiser-Guttman rule in a number of situations, especially when the number of factors was two. However, EGA was the only technique able to correctly estimate the number of dimensions in the four-factor structure when the correlation between factors were .7, showing an accuracy of 100% for a sample size of 5,000 observations. Finally, the EGA was used to estimate the number of factors in a real dataset, in order to compare its performance with the other six techniques tested in the simulation study. [ABSTRACT FROM AUTHOR]

The rapid worldwide evolution of LEDs as light sources has brought new challenges, which means that new methods are needed and new algorithms have to be developed. Since the majority of LED luminaries are of the multi-source type, established methods for the design of light engines cannot be used in the design of LED light engines. This is because in the latter case what is involved is not just the design of a good reflector or projector lens, but the design of several lenses which have to work together in order to achieve satisfactory results. Since lenses can also be bought off the shelf from several manufacturers, it should be possible to combine together different off the shelf lenses in order to design a good light engine. However, with so many different lenses to choose from, it is almost impossible to find an optimal combination by hand, which means that some optimization algorithms need to be applied. In order for them to work properly, it is first necessary to describe the input data (i.e. spatial light distribution) in a functional form using as few as possible parameters. In this paper the focus is on the approximation of the input data, and the implementation of the well-known mathematical procedure for the separation of linear and nonlinear parameters, which can provide a substantial increase in performance. [ABSTRACT FROM AUTHOR]

The deployment of large number of femtocell base stations allows us to extend the coverage and efficiently utilize resources in a low cost manner. However, the small cell size of femtocell networks can result in frequent handovers to the mobile user, and consequently throughput degradation. Thus, in this paper, we propose predictive association control schemes to improve the system’s effective throughput. Our design focuses on reducing handover frequency without impacting on throughput. The proposed schemes determine handover decisions that contribute most to the network throughput and are proper for distributed implementations. The simulation results show significant gains compared with existing methods in terms of handover frequency and network throughput perspective. [ABSTRACT FROM AUTHOR]

In this paper, we present a novel image mosaicking method that is based on Speeded-Up Robust Features (SURF) of line segments, aiming to achieve robustness to incident scaling, rotation, change in illumination, and significant affine distortion between images in a panoramic series. Our method involves 1) using a SURF detection operator to locate feature points; 2) rough matching using SURF features of directed line segments constructed via the feature points; and 3) eliminating incorrectly matched pairs using RANSAC (RANdom SAmple Consensus). Experimental results confirm that our method results in high-quality panoramic mosaics that are superior to state-of-the-art methods. [ABSTRACT FROM AUTHOR]

Although frequent fluctuations in domestic hog prices seriously affect the stability and robustness of the hog supply chain, hog futures (an effective hedging instrument) have not been listed in China. To better understand hog futures market hedging, it is important to study the steady state of intersubjective bidding. This paper uses evolutionary game theory to construct a game model between hedgers and speculators in the hog futures market, and replicator dynamic equations are then used to obtain the steady state between the two trading entities. The results show that the steady state is one in which hedgers adopt a “buy” strategy and speculators adopt a “do not speculate” strategy, but this type of extreme steady state is not easily realized. Thus, to explore the rational proportion of hedgers and speculators in the evolutionary stabilization strategy, bidding processes were simulated using weekly average hog prices from 2006 to 2015, such that the conditions under which hedgers and speculators achieve a steady state could be analyzed. This task was performed to achieve the stability critical point, and we show that only when the value of λ is satisfied and the conditions of hog futures price changes and futures price are satisfied can hedgers and speculators achieve a rational proportion and a stable hog futures market. This market can thus provide a valuable reference for the development of the Chinese hog futures market and the formulation and guidance of relevant departmental policies. [ABSTRACT FROM AUTHOR]

Let A be any fixed cut-off restart algorithm running in parallel on multiple processors. If the algorithm is only allowed to run for up to time D, then it is no longer guaranteed that a result can be found. In this case, the probability of finding a solution within the time D becomes a measure for the quality of the algorithm. In this paper we address this issue and provide upper and lower bounds for the probability of A finding a solution before a deadline passes under varying assumptions. We also show that the optimal restart times for a fixed cut-off algorithm running in parallel is identical for the optimal restart times for the algorithm running on a single processor. Finally, we conclude that the odds of finding a solution scale superlinearly in the number of processors. [ABSTRACT FROM AUTHOR]

This paper considers the problem of finding minimal length tree networks on the unit sphere Φ of a given point set (V) where distance is measured along great circular arcs. The related problems of finding a Steiner Minimal Tree SMT (V) and of finding a Minimum Spanning Tree MST(V) are treated through a simplicial decomposition technique based on computing the Delaunay Triangulation DT (V) and the Voronoi Diagram VD(V) of the given point set. O (N log N) algorithms for computing DT(V), VD(V), and WST(V) as well as an O(N log N) heuristic for finding a sub-optimal SMT(V) solution are presented, together with experimental results for randomly distributed points on Φ. [ABSTRACT FROM AUTHOR]

Retinal microaneurysms (MAs) are the earliest clinically observable lesions of diabetic retinopathy. Reliable automated MAs detection is thus critical for early diagnosis of diabetic retinopathy. This paper proposes a novel method for the automated MAs detection in color fundus images based on gradient vector analysis and class imbalance classification, which is composed of two stages, i.e. candidate MAs extraction and classification. In the first stage, a candidate MAs extraction algorithm is devised by analyzing the gradient field of the image, in which a multi-scale log condition number map is computed based on the gradient vectors for vessel removal, and then the candidate MAs are localized according to the second order directional derivatives computed in different directions. Due to the complexity of fundus image, besides a small number of true MAs, there are also a large amount of non-MAs in the extracted candidates. Classifying the true MAs and the non-MAs is an extremely class imbalanced classification problem. Therefore, in the second stage, several types of features including geometry, contrast, intensity, edge, texture, region descriptors and other features are extracted from the candidate MAs and a class imbalance classifier, i.e., RUSBoost, is trained for the MAs classification. With the Retinopathy Online Challenge (ROC) criterion, the proposed method achieves an average sensitivity of 0.433 at 1/8, 1/4, 1/2, 1, 2, 4 and 8 false positives per image on the ROC database, which is comparable with the state-of-the-art approaches, and 0.321 on the DiaRetDB1 V2.1 database, which outperforms the state-of-the-art approaches. [ABSTRACT FROM AUTHOR]

Community structure is considered one of the most interesting features in complex networks. Many real-world complex systems exhibit community structure, where individuals with similar properties form a community. The identification of communities in a network is important for understanding the structure of said network, in a specific perspective. Thus, community detection in complex networks gained immense interest over the last decade. A lot of community detection methods were proposed, and one of them is the label propagation algorithm (LPA). The simplicity and time efficiency of the LPA make it a popular community detection method. However, the LPA suffers from instability detection due to randomness that is induced in the algorithm. The focus of this paper is to improve the stability and accuracy of the LPA, while retaining its simplicity. Our proposed algorithm will first detect the main communities in a network by using the number of mutual neighbouring nodes. Subsequently, nodes are added into communities by using a constrained LPA. Those constraints are then gradually relaxed until all nodes are assigned into groups. In order to refine the quality of the detected communities, nodes in communities can be switched to another community or removed from their current communities at various stages of the algorithm. We evaluated our algorithm on three types of benchmark networks, namely the Lancichinetti-Fortunato-Radicchi (LFR), Relaxed Caveman (RC) and Girvan-Newman (GN) benchmarks. We also apply the present algorithm to some real-world networks of various sizes. The current results show some promising potential, of the proposed algorithm, in terms of detecting communities accurately. Furthermore, our constrained LPA has a robustness and stability that are significantly better than the simple LPA as it is able to yield deterministic results. [ABSTRACT FROM AUTHOR]

We introduce a fast error-free tracking method applicable to sequences of two and three dimensional images. The core idea is to use Quadtree (resp. Octree) data structures for representing the spatial discretization of an image in two (resp. three) spatial dimensions. This representation enables one to merge into large computational cells the regions that can be faithfully described with such a coarse representation, thus significantly reducing the total number of degrees of freedom that are processed, without compromising accuracy. This encoding is particularly effective in the case of algorithms based on moving fronts, since the adaptive refinement provides a natural means to focus the processing resources on information near the moving front. In this paper, we use an existing contour based tracker and reformulate it to the case of Quad-/Oc-tree data structures. Relevant mathematical assumptions and derivations are presented for this purpose. We then demonstrate that, on standard bio-medical image sequences, a speed up of 5X is easily achieved in 2D and about 10X in 3D. [ABSTRACT FROM AUTHOR]

In the fourth generation or next generation networks, services of non-real-time variable bit rate (NRT-VBR) and best effort (BE) will dominate over 85% of the total traffic in the networks. In this paper, we study the power saving mechanism of NRT-VBR and BE services for mobile handsets (MHs) to prolong their battery lifetime (i.e., the sustained operation duration) in the fourth generation networks. Because the priority of NRT-VBR and BE is lower than that of real-time VBR (RT-VBR) or guaranteed bit rate (GBR) services, we investigate an extended sleep mode for lower priority services (e.g., NRT-VBR and BE) in an MH to conserve the energy. The extended sleep mode is used when the MH wakes up from the sleep mode but it cannot obtain the bandwidth from base station (BS). The proposed mechanism, named extra power saving scheme (EPSS), uses the Markovian queuing model to estimate the extended sleep duration to let MHs conserve their battery energy when the networks traffic is congested. To study the performance of EPSS, an accurate analysis model of energy is presented and validated by taking a series of simulations. Numerical experiments show that EPSS can achieve 43% extra energy conservation at most when downlink resource is saturated. We conclude that the energy of MHs can be conserved further by applying EPSS when the traffic load is saturated. The effect of energy saving becomes more obvious when the portion of NRT-VBR and BE services is greater than that of RT-VBR and GBR services. [ABSTRACT FROM AUTHOR]

Embodied evolutionary robotics is a sub-field of evolutionary robotics that employs evolutionary algorithms on the robotic hardware itself, during the operational period, i.e., in an on-line fashion. This enables robotic systems that continuously adapt, and are therefore capable of (re-)adjusting themselves to previously unknown or dynamically changing conditions autonomously, without human oversight. This paper addresses one of the major challenges that such systems face, viz. that the robots must satisfy two sets of requirements. Firstly, they must continue to operate reliably in their environment (viability), and secondly they must competently perform user-specified tasks (usefulness). The solution we propose exploits the fact that evolutionary methods have two basic selection mechanisms–survivor selection and parent selection. This allows evolution to tackle the two sets of requirements separately: survivor selection is driven by the environment and parent selection is based on task-performance. This idea is elaborated in the Multi-Objective aNd open-Ended Evolution (monee) framework, which we experimentally validate. Experiments with robotic swarms of 100 simulated e-pucks show that monee does indeed promote task-driven behaviour without compromising environmental adaptation. We also investigate an extension of the parent selection process with a ‘market mechanism’ that can ensure equitable distribution of effort over multiple tasks, a particularly pressing issue if the environment promotes specialisation in single tasks. [ABSTRACT FROM AUTHOR]

This paper is concerned with accurate and efficient numerical methods for solving viscous and nonviscous wave problems. The paper first introduces a new second-order PR-ADI like scheme. For an efficient simulation, the scheme is also extended to a highorder compact PRADI likemethod. Both of themhave the advantages of unconditional stability, less impact of the perturbing terms on the accuracy, and being convenient to compute the boundary values of the intermediates. Besides this, the compact scheme has high-order accuracy and costs less in computational time. Numerical results are presented to show the accuracy and efficiency of the new algorithms. [ABSTRACT FROM AUTHOR]

A temporal flexible planning problem that involves contingent and requirement events can be formulated as a simple temporal network with uncertainty (STNU). An STNU is controllable when there is a strategy for executing the requirement events (or actions) in such a way that all the conditions involving contingent events can be satisfied in all situations. The most interesting and useful controllability property is dynamic controllability in which the remaining actions in an STNU can always be scheduled under all possible feasible durations of future contingent events when all the past contingent events are known. In this paper, we propose and study a novel problem of assigning bounds on the duration of each requirement link in order for the resulting STNU to be dynamically controllable and to minimize the total cost over the allowed durations of all requirement links. We first prove the NP hardness of the problem with a linear cost function. We then formulate the dynamic controllability of an STNU as the constraints in a nonlinear optimization problem. Finally, we present methods for reducing the number of constraints in order to make the problem tractable and to demonstrate the computational performance of our methods. [ABSTRACT FROM AUTHOR]

In the literature, the conditions on history variables or forward simulations that are related to liveness are expressed in terms of behaviours, and are stronger than convenient and necessary. In this paper, we propose alternative conditions on the simulation relation, which are expressed in terms of the next state relation, and are closely tied to the weak or strong fairness conditions of the specifications. The proof of soundness of this proposal is based on a new theorem that asserts the existence of a strongly fair scheduler for infinitely many alternatives. The theory is extended to simulations in which the concrete specification (occasionally) does fewer steps than the abstract specification it implements. [ABSTRACT FROM AUTHOR]

In a discrete-event simulation, the information related to the events scheduled to occur in the future is kept in a data structure called the future event set (FES). In this paper, we study the interaction hold model a popular stochastic model for FES performance analysis, corresponding to the superposition of a (fixed) number of renewal processes. The general state-space Markov chain formed by the discrete-time process that keeps track, at event times, of the residual lifetimes is shown here to be recurrent in the sense of Harris, and its stationary distribution is obtained. Linked lists and indexed lists, two popular FESs, are investigated using this model. For the interaction hold model, we make rigorous certain published results as well as introduce new ones. For example, we derive the distribution of the relative position of the event to be inserted in the data structure. In the exponential case, our analytic and empirical results confirm that when events with relatively short lifetimes often get regenerated upon their occurrence, it is better to scan a list (or sublist) from its head rather than tail. In the same context and for indexed lists with sublists with constant sizes, our results suggest that subsequent sublists should be of larger sizes, i.e., the first sublist should contain the smallest number of records, the second sublist the second smallest number of records, etc. [ABSTRACT FROM AUTHOR]

This paper describes the results of two studies where decentralized planning has been simulated. The coordination mechanisms employed were based on the Dantzig-Wolfe decomposition algorithm, and the Ten Kate decomposition algorithm, which are price directive and budget directive planning procedures, respectively. The importance of the results is that the data and the structure of the two planning problems come from real organizations--a cooperative slaughterhouse and a forecast model for Danish agriculture. Thus conclusions based on using a price-directive and a budget-directive planning method to simulate decentralized planning m these organizations have relevance to the potential value of using such methods in real organizations, The mare conclusions concern the importance of and the difficulties in finding good starting strategies for the two methods and the impact of the organizational structure on the rate of improvement for the methods. [ABSTRACT FROM AUTHOR]

In this paper, an optimal longitudinal slip ratio system for real-time identification of electric vehicle (EV) with motored wheels is proposed based on the adhesion between tire and road surface. First and foremost, the optimal longitudinal slip rate torque control can be identified in real time by calculating the derivative and slip rate of the adhesion coefficient. Secondly, the vehicle speed estimation method is also brought. Thirdly, an ideal vehicle simulation model is proposed to verify the algorithm with simulation, and we find that the slip ratio corresponds to the detection of the adhesion limit in real time. Finally, the proposed strategy is applied to traction control system (TCS). The results showed that the method can effectively identify the state of wheel and calculate the optimal slip ratio without wheel speed sensor; in the meantime, it can improve the accelerated stability of electric vehicle with traction control system (TCS). [ABSTRACT FROM AUTHOR]

Nowadays, the appetite for the investment and mergers and acquisitions (M&A) activity in RFID companies is growing rapidly. Although the huge number of papers have addressed the topic of business valuation models based on statistical methods or neural network methods, only a few are dedicated to constructing a general framework for business valuation that improves the performance with network graph (NG) and the corresponding community mining (CM) method. In this study, an NG based business valuation model is proposed, where real options approach (ROA) integrating CM method is designed to predict the company’s net profit as well as estimate the company value. Three improvements are made in the proposed valuation model: Firstly, our model figures out the credibility of the node belonging to each community and clusters the network according to the evolutionary Bayesian method. Secondly, the improved bacterial foraging optimization algorithm (IBFOA) is adopted to calculate the optimized Bayesian posterior probability function. Finally, in IBFOA, bi-objective method is used to assess the accuracy of prediction, and these two objectives are combined into one objective function using a new Pareto boundary method. The proposed method returns lower forecasting error than 10 well-known forecasting models on 3 different time interval valuing tasks for the real-life simulation of RFID companies. [ABSTRACT FROM AUTHOR]

Swarm robotics is a promising approach for the coordination of large numbers of robots. While previous studies have shown that evolutionary robotics techniques can be applied to obtain robust and efficient self-organized behaviors for robot swarms, most studies have been conducted in simulation, and the few that have been conducted on real robots have been confined to laboratory environments. In this paper, we demonstrate for the first time a swarm robotics system with evolved control successfully operating in a real and uncontrolled environment. We evolve neural network-based controllers in simulation for canonical swarm robotics tasks, namely homing, dispersion, clustering, and monitoring. We then assess the performance of the controllers on a real swarm of up to ten aquatic surface robots. Our results show that the evolved controllers transfer successfully to real robots and achieve a performance similar to the performance obtained in simulation. We validate that the evolved controllers display key properties of swarm intelligence-based control, namely scalability, flexibility, and robustness on the real swarm. We conclude with a proof-of-concept experiment in which the swarm performs a complete environmental monitoring task by combining multiple evolved controllers. [ABSTRACT FROM AUTHOR]

Because of the mobility, computing power and changeable topology of dynamic networks, it is difficult for random linear network coding (RLNC) in static networks to satisfy the requirements of dynamic networks. To alleviate this problem, a minimal increase network coding (MINC) algorithm is proposed. By identifying the nonzero elements of an encoding vector, it selects blocks to be encoded on the basis of relationship between the nonzero elements that the controls changes in the degrees of the blocks; then, the encoding time is shortened in a dynamic network. The results of simulations show that, compared with existing encoding algorithms, the MINC algorithm provides reduced computational complexity of encoding and an increased probability of delivery. [ABSTRACT FROM AUTHOR]

We study the controllability of networks in the process of cascading failures under two different attacking strategies, random and intentional attack, respectively. For the highest-load edge attack, it is found that the controllability of Erdős-Rényi network, that with moderate average degree, is less robust, whereas the Scale-free network with moderate power-law exponent shows strong robustness of controllability under the same attack strategy. The vulnerability of controllability under random and intentional attacks behave differently with the increasing of removal fraction, especially, we find that the robustness of control has important role in cascades for large removal fraction. The simulation results show that for Scale-free networks with various power-law exponents, the network has larger scale of cascades do not mean that there will be more increments of driver nodes. Meanwhile, the number of driver nodes in cascading failures is also related to the edges amount in strongly connected components. [ABSTRACT FROM AUTHOR]

This paper proposes a new imaging algorithm based on a novel accurate range model to process the data acquired by Geosynchronous-Earth-orbital Synthetic Aperture Radar (Geo-SAR). The new range model, called DRM-5, is obtained from the 1-5th order Doppler parameters of spaceborne SAR. It is employed to describe the slant range of Geo-SAR during the super-long integration time. Furthermore, the two-dimensional frequency spectrum of point targets based on the new range model is derived and analyzed. An advanced Frequency Domain Algorithm (FDA) based on DRM-5 is proposed to process the data of stripmap mode Geo-SAR. The varied Doppler parameters in the cross-azimuth direction are considered in the new imaging algorithm, and the space-varied range-azimuth coupling phase term is compensated through data blocking. A simulation experiment is performed to verify the efficiency and superiority of the new algorithm, and the results show that it has a good effect on an L-band stripmap mode Geo-SAR system with azimuth resolution around 5 m and 300 km range swath. [ABSTRACT FROM AUTHOR]

Abstract: This paper presents an impulsive optimal control model for solving the optimal designing problem of the trajectory of horizontal wells. We take fully into account the effect of unknown disturbances in drilling. The optimal control problem can be converted into a nonlinear parametric optimization by integrating the state equation. We discuss here that the locally optimal solution depends in a continuous way on the parameters (disturbances) and utilize this property to propose a revised Hooke–Jeeves algorithm. The uniform design technique is incorporated into the revised Hooke–Jeeves algorithm to handle the multimodal objective function. The numerical simulation is in accordance with theoretical results. The numerical results illustrate the validity of the model and efficiency of the algorithm. [Copyright &y& Elsevier]