Search

Kraft pulp production generates residues and by‐products of significant importance to the mill. Solid residues from forestry activities are commonly used to generate steam in power boilers. In the recovery cycle, black liquor generates steam (and subsequently energy) by burning in the Tomlinson boiler, while white liquor is regenerated. Well‐developed alternative technologies can use these residues and by‐products to generate different types of biofuels. This review addresses the use of such technologies integrated with Kraft mills, in the concept of biorefineries, showing advantages, disadvantages, and successful examples. Solid residues from forestry can be used to produce bio‐oil through processes such as fast pyrolysis and hydrothermal liquefaction. Bio‐oils are currently used for heating through combustion in commercial/industrial boilers, but greater appreciation occurs if used as biofuels, which is done through catalytic upgrading processes. Black liquor gasification generates synthesis gas, which can be burned for energy co‐generation, used to produce synthetic fuels, or as a hydrogenating agent for bio‐oil or crude tall oil catalytic upgrading. Kraft biorefineries are gradually being implemented, justifying efforts to improve existing and new biomass conversion technologies. [ABSTRACT FROM AUTHOR]

Abstract: Synthetic natural gas (SNG) production from dry black liquor gasification (DBLG) system is an attractive option to reduce CO2 emissions replacing natural gas. This article evaluates the energy conversion performance of SNG production from oxygen blown circulating fluidized bed (CFB) black liquor gasification process with direct causticization by investigating system integration with a reference pulp mill producing 1000 air dried tonnes (ADt) of pulp per day. The direct causticization process eliminates use of energy intensive lime kiln that is a main component required in the conventional black liquor recovery cycle with the recovery boiler. The paper has estimated SNG production potential, the process energy ratio of black liquor (BL) conversion to SNG, and quantified the potential CO2 abatement. Based on reference pulp mill capacity, the results indicate a large potential of SNG production (about 162MW) from black liquor but at a cost of additional biomass import (36.7MW) to compensate the total energy deficit. The process shows cold gas energy efficiency of about 58% considering black liquor and biomass import as major energy inputs. About 700ktonnes per year of CO2 abatement i.e. both possible CO2 capture and CO2 offset from bio-fuel use replacing natural gas, is estimated. Moreover, the SNG production offers a significant fuel replacement in transport sector especially in countries with large pulp and paper industry e.g. in Sweden, about 72% of motor gasoline and 40% of total motor fuel could be replaced. [Copyright &y& Elsevier]

Abstract: Black liquor gasification (BLG) for bio-fuel or electricity production at the modern pulp mills is a field in continuous evolution and the efforts are considerably driven by the climate change, fuel security, and renewable energy. This paper evaluates and compares two BLG systems for methanol production: (i) oxygen blown pressurized thermal BLG; and (ii) dry BLG with direct causticization, which have been regarded as the most potential technology candidates for the future deployment. A key objective is to assess integration possibilities of BLG technologies with the reference Kraft pulp mill producing 1000air dried tonnes (ADt) pulp/day replacing conventional recovery cycle. The study was performed to compare the systems’ performance in terms of potential methanol production, energy efficiency, and potential CO2 reductions. The results indicate larger potential of black liquor conversion to methanol from the pressurized BLG system (about 77million tonnes/year of methanol) than the dry BLG system (about 30million tonnes/year of methanol) utilizing identical amount of black liquor available worldwide (220million tDS/year). The potential CO2 emissions reduction from the transport sector is substantially higher in pressurized BLG system (117million tonnes/year CO2 reductions) as compared to dry BLG system (45million tonnes/year CO2 reductions). However, the dry BLG system with direct causticization shows better results when considering consequences of additional biomass import. In addition, comparison of methanol production via BLG with other bio-refinery products, e.g. hydrogen, dimethyl ether (DME) and bio-methane, has also been discussed. [Copyright &y& Elsevier]

Abstract: The black liquor gasification based bio-fuel production at chemical pulp mill is an attractive option to replace conventional recovery boilers increasing system energy efficiency. The present paper studies circulating fluidized bed system with direct causticization using TiO2 for the gasification of the black liquor to the synthesis gas. The advantage of using direct causticization is the elimination of energy-intensive lime kiln which is an integral part of the conventional black liquor recovery system. The study evaluates the effects of gasifying medium i.e. oxygen or air, on the fluidized bed gasification system, the synthesis gas composition, and the downstream processes for the synthesis gas conversion to the synthetic natural gas (SNG). The results showed higher synthetic natural gas production potential with about 10% higher energy efficiency using oxygen blown gasification system than the air blown system. From the pulp mill integration perspective, the material and energy balance results in better integration of air blown system than the oxygen blown system, e.g. less steam required to be generated in the power boiler, less electricity import, and less additional biomass requirement. However, the air blown system still requires a significant amount of energy in terms of the synthesis gas handling and gas upgrading using the nitrogen rejection system. [Copyright &y& Elsevier]