Search

Abstract: The present work is focused on investigating the potential role of capillary barriers on the stability of layered soil deposits laying upon high permeability steep slopes. In presence of capillary barrier effects, often possible on a soil stratigraphy characterized by contrasting hydraulic properties (pyroclastics deposit over pumices, silt upon fractured bedrock, silt over sand) failure might originate in less permeable layers, where unsaturated conditions might provide a crucial contribution to stability. Basic ideas and considerations have been drawn from a peculiar case study, the catastrophic landslide occurred in Campania, Southern Italy, on May 1998, which is discussed in this paper from a different perspective. The areal extent of failures’ distribution, their dense concentration at the steeper and higher slopes, the extremely high number of initial failures occurred within a relatively short time span suggest that the intimate cause of the event is related at some extent to the soil state characteristic parameters rather than positive pore pressure pulses from water circulation in coarser layers or groundwater level rising from bedrock and springs. A widespread loss of soil strength related to saturation can contribute to explain such phenomena. Capillary barrier effects favor accumulation and lateral distribution of percolating rainfall and possibly divert flowlines downslope, thus leading to localized increases in water content and loss of strength. Diversion of percolating waters facilitates lateral redistribution of soil moisture along the slope with possible further localized saturation, because more permeable layers may act temporarily as barriers and not as drains, as one could expect. Numerical 2-D infiltration models with parameters calibrated versus laboratory data show a relevant influence of capillary barrier effects on infiltration in layered slopes with vertically stratified variations of hydraulic properties and point out significant localized moisture accumulation with possible consequences on slope stability. Landslide initiation phenomena in layered covers might thus be conditioned by the increase in saturation within the least permeable soil layers due to capillary barrier phenomena. [Copyright &y& Elsevier]

Abstract: Campania Region (Italy), one of the most densely populated areas in Europe, is probably the one with the highest risk of landslide. A large part of the region is covered by unsaturated cohesionless pyroclastic deposits subjected to rainfall-induced landslides. According to experience, these can display different features and magnitude. The most catastrophic landslides are liquefied debris flows which periodically occur on steep slopes, causing death and destruction in areas located downslope. Therefore, zoning of those areas which can be the source of liquefied debris flow is necessary. The paper reports some useful elements for zoning based on infinite slope analysis, accounting for the results of recent research on the mechanics of rainfall-induced landslides in pyroclastic soils. [Copyright &y& Elsevier]

Shallow flowslides, debris flows and debris avalanches are rainfall-induced landslides consisting in the shear failure of few metres of soils (or in some cases even less than a metre), which greatly increase downslope in volume and flow velocity. The southern Italian region of Campania has been historically affected by such events involving pyroclastic soils mainly resting on steep carbonate slopes. This paper deals with the analysis of factors influencing the occurrence of flow-like landslides, adopting the Lattari Mts. in Campania as a case study. The results of two investigation campaigns carried out in the area allowed effective large-scale geological and geotechnical characterization to be set up. Stratigraphic profiles, mean physical properties and typical friction angles at the critical state for each soil layer were investigated. The effect of suction on peak and critical shear strength, whose drop is responsible for soil failure, was analysed. Using detailed information on both the stratigraphic and geotechnical features of the soils involved in past flow-like landslides, typical triggering models were selected, representing locally recurrent geomorphologic conditions at the basin scale. The identified models were adopted for slope stability analyses carried out on four cross-sections of flowslides occurring prior to the event, to back-analyse the triggering conditions. From the evidence on the triggering mechanisms and the results of analyses, the infinite slope approach is not always suitable to model slope stability conditions properly, because the onset of landslides is also affected by local topographic and stratigraphic factors. • Flow-like landslides can be triggered due to local features. • Local topographic irregularities can be represented by roads, tracks, scarps and terraces. • Infinite slope model can be suitable to model only slopes characterized by angles higher than 39–40°. • Local natural and anthropic factors can affect the results of slope stability analysis. • The triggered landslides occurred when the 3-months precedent rainfall exceeded the 40 years average value. [ABSTRACT FROM AUTHOR]