Search

Advancements in machining technology demand higher speeds and precision, necessitating improved control systems in equipment like CNC machine tools. Due to lead errors, structural vibrations, and thermal deformation, commercial CNC controllers commonly use rotary encoders in the motor side to close the position loop, aiming to prevent insufficient stability and premature wear and damage of components. This paper introduces a multivariable iterative learning control (MILC) method tailored for flexible feed drive systems, focusing on enhancing dynamic positioning accuracy. The MILC employs error data from both the motor and table sides, enhancing precision by injecting compensation commands into both the reference trajectory and control command through a norm-optimization process. This method effectively mitigates conflicts between feedback control (FBC) and traditional iterative learning control (ILC) in flexible structures, achieving smaller tracking errors in the table side. The performance and efficacy of the MILC system are experimentally validated on an industrial biaxial CNC machine tool, demonstrating its potential for precision control in modern machining equipment. [ABSTRACT FROM AUTHOR]

This report documents the research results of Task Order 4205 (TO4205), Fault Tolerant Lateral Control for Transient Buses and Trucks performed during 2000-2003. In this task order, we studied the procedures for designing real-time lateral control systems for automated vehicles that are not sensitive to failures of the two key components: a set of magnetometers at the front bumper and another set at the rear bumpers. This problem is important because failures related to either front or rear magnetometers may have immediate effect on the stability of the closed loop control system.

The motion of nonholonomic mobile manipulators (NMMs) is inherently constrained by joint limits, joint velocity limits, self-collisions and singularities. Most motion planning algorithms consider some of the aforementioned constraints, however, a unified framework to deal with all of them is lacking. This paper proposes a motion planning solution for the kinematic trajectory tracking of redundant NMMs that include all the constraints needed for practical implementation, which improves the manipulability of both the entire system and the manipulator to prevent singularities. Experiments using a 10-DOF NMM demonstrate the good performance of the proposed method for executing 6-DOF trajectories while satisfying all the constraints and simultaneously maximizing manipulability. [ABSTRACT FROM AUTHOR]

In this article, we aim to achieve manual guidance of a robot manipulator to perform tasks that require strict path following and would benefit from collaboration with a human to guide the motion. The robot can be used as a tool to increase the accuracy of a human operator while remaining compliant with the human instructions. We propose a dual-loop control structure where the outer admittance control loop allows the robot to be compliant along a path considering the projection of the external force to the tangential-normal-binormal (TNB) frame associated with the path. The inner motion control loop is designed based on a modified sliding mode control (SMC) law. We evaluate the system behavior to forces applied from different directions to the end-effector of a 6-DOF industrial robot in a linear motion test. Next, a second test using a 3D path as a tracking task is conducted, where we specify three interaction types: free motion (FM), force-applied motion (FAM), and combined motion with virtual forces (CVF). Results show that the difference of root mean square error (RMSE) among the cases is less than 0.1 mm, which proves the feasibility of applying this method for various path-tracking applications in compliant human–robot collaboration. [ABSTRACT FROM AUTHOR]

Due to increasingly demanding requirements for driving safety, precise and robust control of tire traction forces is essential to implement high-performance vehicle-control systems. However, traditional slip-ratio-based methods cannot guarantee achievement of desired traction forces due to a lack of tire force feedback. This paper proposes an observer-based traction force control scheme that is robust with respect to variations of road conditions and tire model uncertainties. Moreover, achievement of desired traction forces is guaranteed. Simulation results verify the robust and satisfactory performance, even under suddenly changing road conditions, as well as parametric and nonparametric tire model uncertainties. [ABSTRACT FROM PUBLISHER]

Lower-limb exoskeletons as walking assistive devices have been intensively investigated in recent decades. In these studies, intention detection and performance evaluation are important topics. In our previous studies, we proposed a disturbance observer (DOB)-based torque estimation algorithm and an admittance control law to shape the admittance of the human-exoskeleton system (HES) and comply with the user's walking intention. These algorithms have been experimentally verified under the condition of no ground reaction force (GRF) in our previous studies. In this paper, we devised and integrated with the exoskeleton control system a sensing and communication module on each foot to measure and compensate for GRF. Rigorous theoretical analysis was performed and the sufficient conditions for the robust stability of the closed-loop system were derived. Then, we conducted level ground assistive walking repeatedly with different test subjects and exhaustive combinations of admittance parameters. In addition, we proposed two tractable and physically insightful performance indices called normalized energy consumption index (NECI) and walking distance in a fixed period of time to quantitatively evaluate the performance for different admittance parameters. We also compared the energy consumption for users walking with and without the exoskeleton. The results show that the proposed admittance control law reduces the energy consumption of the user during level ground walking. [ABSTRACT FROM AUTHOR]