Search

The world is warming, and the demand for cooling is increasing. Developing a future green hydrogen economy will also increase the demand for cooling for hydrogen liquefaction. This increase in cooling demand will happen mainly in tropical and developing countries due to their increase in population, improvements in quality of life, and the export of their renewable potential with liquid hydrogen. To solve this increase in demand for cooling, this paper proposes the use of ammonia airship cooling (AAC). AAC extracts cold from the tropopause (−80 °C) with airships and ammonia refrigeration cycles. The liquid ammonia is then transported back to the surface to provide low temperature cooling services (−33 °C). This cooling service is particularly interesting for lowering the electricity consumption in hydrogen liquefaction plants. If all the technological challenges mentioned in the paper are addressed, it is estimated that the cost of cooling with the technology is 8.25 USD/MWht and that AAC could reduce the electricity demand for hydrogen liquefaction by 30%. AAC is an innovative renewable cooling technology that has the potential to complement other renewable energy sources in a sustainable future. [ABSTRACT FROM AUTHOR]

There is a significant energy transition in progress globally. This is mainly driven by the insertion of variable sources of energy, such as wind and solar power. To guarantee that the supply of energy meets its demand, energy storage technologies will play an important role in integrating these intermittent energy sources. Daily energy storage can be provided by batteries. However, there is still no technology that can provide weekly, monthly and seasonal energy storage services where pumped hydro storage is not a viable solution. Herein, we introduce an innovative energy storage proposal based on isothermal air compression/decompression and storage of the compressed air in the deep sea. Isothermal deep ocean compressed air energy storage (IDO-CAES) is estimated to cost from 1500 to 3000 USD/kW for installed capacity and 1 to 10 USD/kWh for energy storage. IDO-CAES should complement batteries, providing weekly, monthly and seasonal energy storage cycles in future sustainable energy grids, particularly in coastal areas, islands and offshore and floating wind power plants, as well as deep-sea mining activities. [ABSTRACT FROM AUTHOR]

Low-carbon energy transitions taking place worldwide are primarily driven by the integration of renewable energy sources such as wind and solar power. These variable renewable energy (VRE) sources require energy storage options to match energy demand reliably at different time scales. This article suggests using a gravitational-based energy storage method by making use of decommissioned underground mines as storage reservoirs, using a vertical shaft and electric motor/generators for lifting and dumping large volumes of sand. The proposed technology, called Underground Gravity Energy Storage (UGES), can discharge electricity by lowering large volumes of sand into an underground mine through the mine shaft. When there is excess electrical energy in the grid, UGES can store electricity by elevating sand from the mine and depositing it in upper storage sites on top of the mine. Unlike battery energy storage, the energy storage medium of UGES is sand, which means the self-discharge rate of the system is zero, enabling ultra-long energy storage times. Furthermore, the use of sand as storage media alleviates any risk for contaminating underground water resources as opposed to an underground pumped hydro storage alternative. UGES offers weekly to pluriannual energy storage cycles with energy storage investment costs of about 1 to 10 USD/kWh. The technology is estimated to have a global energy storage potential of 7 to 70 TWh and can support sustainable development, mainly by providing seasonal energy storage services. [ABSTRACT FROM AUTHOR]

Groundwater storage is an important water management solution that is overlooked by several countries worldwide. This paper evaluates the potential for storing water in the Bananal sedimentary basin and proposes the construction of canals to reduce sediment obstructions in the river flow and harmful flood events. This would allow for better control of the water level. The water stored in the sedimentary basin can be used as a climate change adaptation measure to ensure that the level of the flood plain is maintained high during a drought or low during an intense flood event. Additionally, the flood plain will function as a water reservoir, regulate the river flow downstream from the flood plain, and enhance hydropower generation. A significantly smaller reservoir area is expected to store water, as the water will be stored as groundwater in the sedimentary basin. Results show that the Bananal basin has the potential to store up to 49 km3 of water, which can add up to 11.7 TWh of energy storage to the Brazilian energy matrix for a CAPEX energy storage cost of 0.095 USD/kWh. This is an interesting solution for the Araguaia basin and several other basins worldwide. [ABSTRACT FROM AUTHOR]

This paper presents the first systematic study on power control strategies for Modular-Gravity Energy Storage (M-GES), a novel, high-performance, large-scale energy storage technology with significant research and application potential. Addressing the current research gap in M-GES power control technology, we propose two corresponding compensation modes and several power control strategies for Hybrid M-GES and M-GES. The effectiveness of these strategies is validated through simulations on the MATLAB/Simulink platform, including tests using sinusoidal power and feasibility verification based on a natural California load curve. Additionally, we analyze the normal and abnormal operating conditions of M-GES. In conclusion, the characteristics of the proposed control strategies are summarized, providing a guideline for further research. [Display omitted] • Modular-gravity energy storage (M-GES) power control system studied. • Two compensation modes and four control strategies are systematically studied and validated. • The center switching method with hysteresis control (CSM-H) excels in continuous compensation mode. • The center switching method with hysteresis control and dead zone (CSM-HD) excels in overlap compensation mode. • Based on the power control system proposed in this paper, the M-GES plant performs highly in natural power systems. [ABSTRACT FROM AUTHOR]

Energy harnessing from renewable energy sources has become more flexible with power electronic technologies. Recent advancements in power electronic technologies achieve converter efficiency higher than 98%. Today, reliable power electronic devices are needed to design a PV-based energy converter (inverter) to reduce the risk of failure and maintenance costs during operation. Wide-bandgap SiC devices are becoming more common in power electronic converters. These devices are designed to reduce switching loss and improve the efficiency of the system. Nevertheless, the cost of SiC devices is a major concern. Hence, to improve the reliability of the PV inverter while considering the economic aspects, this paper develops a highly reliable PV inverter with a hybrid Si/SiC power module that consists of a Si-IGBT with a SiC anti-parallel diode. A test case of a 3 kW PV inverter is considered for reliability analysis. The loading of the PV inverter is done under uncertain environmental conditions by considering the yearly Mission Profile (MP) data related to Ambient Temperature (AT) and Solar Irradiance (SI) at the India and Denmark locations. The effectiveness of the proposed hybrid Si/SiC power module is tested by comparing it with a conventional IGBT power module. The results showcase the marked improvement in PV inverter reliability with the proposed hybrid power module. [ABSTRACT FROM AUTHOR]

Implementing Circular Economy (CE) strategies has recently become one of the essential strategies for sustainable development and corporate social responsibility. However, despite the promising role and potential benefits of the CE for companies and society, there has still been insufficient analysis examining the challenges for circular transition faced by micro, small, and medium-sized enterprises (MSMEs) and the role that standards, such as British Standard (BS) 8001:2017, play during the transition process from linear to circular economy practices. Given this context and to further increase our understanding of the factors preventing the transition from linear to CE, this study aims to assess the CE implementation in MSMEs in developing economies in light of BS 8001:2017 through a survey with Brazilian MSMEs. The primary findings emphasize that CE practices from the Administration dimension occupied top positions in the ranking of implementation, along with one practice from the Innovation dimension. However, the results show that several practices associated with Transparency and Product Optimization in the value chain held the last level of evidence of implementation. Findings suggest that assessing MSMEs through BS 8001:2017 is beneficial for aiding them in analysing and reconsidering their practices related to the conventional linear business models of take-use-dispose. Collectively, the findings improve our understanding of the level of adoption of CE components implementation, the most and the least adopted practices during the CE transition. The study also provides implications for policy, theory, and practical applications in cases where there is an interest in assessing the maturity of CE implementation within MSMEs in developing economies. [ABSTRACT FROM AUTHOR]

Complex engineering systems, such as power plants, deliver their best performance when operating along a designed range of some priority parameters. However, plant field operation may deviate from design conditions, and new references must be identified. Actions towards high-quality operation can be supported by fine modeling, which helps building decision support tools. The present work proposes a standardization strategy for the operation of an actual coal-fired power plant based on a Design of Experiment approach, partially tested onsite and finally accomplished with surrogate models built upon a 2 year long database. Artificial Neural Networks (ANNs) and Mass and Energy balances (M&Es) are used to represent the plant's steam generator and its mills subset, which is the core of an operational guide to increase system efficiency under actual operation. Primary and secondary air flows, pulverized coal outlet temperature, speed of the dynamic classifier, primary air flow, excess O 2 , primary and secondary air pressures are the seven controllable factors selected as the most relevant ones among an extensive set of parameters, able to perform effective maneuvers. The application of the operational guide indicates combinations of ranges of the seven controllable parameters that allow for achieving steam generator efficiency within the 84.0% to 88.92% range. The proposed methodology aims as well to improve safe and stable conditions to a system that undergoes operation different than the one prescribed by the original design. The study case results show an opportunity to raise efficiency by up to 2.28% during operation, which represents a reduction in coal consumption by 3.1 t/h and above 6% on CO 2 emissions. • Real plant data, operational information and real experiments on site from the PECEM power plant. • System performance process standardization employing decision support tools. • A high-quality operation by the fine modeling of plants systems. • Surrogate models applied on coal-fired power plants literature reviewed. • Logbook to perform a Design of Experiments approach in a power plant in operation. [ABSTRACT FROM AUTHOR]