Search

A facile approach for possible industrial production of long-persistent phosphorescence, continuing to emitting light for a long time period, smart cobbles were developed toward photoluminescent hard surfaces. The inorganic strontium aluminium oxide pigment doped with rare earth elements was added to a synthetic organic epoxy in the presence of polyamine as a hardener to make a phosphor-loaded viscous fluid that can then be hardened in a few minutes. The transparency of the solid cobbles can be accomplished easily using homogeneous dispersion of the phosphor in the epoxy resin fluid before the addition of a hardener to avoid pigment aggregation. This pigment-epoxy formula can be easily applied industrially onto flagstones surfaces under ambient conditions. The photoluminescent cobblestones demonstrated an optimum excitation wavelength at 366 nm and an emission band at 521 nm with a long-persistent phosphorescence cobble surface. The development of a translucent white colour under normal daylight, bright green under ultraviolet (UV) irradiation, bright white colour after 30 sec in the dark, and phosphorescent green colour after 75 min in the dark was indicated using Commission Internationale de l'Eclairage (CIE) Laboratory coloration measurements. The luminescent hard composite cobble exhibited a highly durable and reversible long-persistent phosphorescence light. Photoluminescence, morphological, and hardness properties as well as the elemental composition of the prepared cobbles were explored., (© 2019 John Wiley & Sons, Ltd.)

Iron-copper bimetal supported on mesoporous γ-Al 2 O 3 with different Fe/Cu ratios was prepared via a modified evaporation-induced self-assembly method and employed to degrade 4-chlorophenol (4-CP) in a Fenton-like process. The X-ray photoelectron spectroscopy, X-ray diffraction spectrum and UV-vis diffuse reflectance spectroscopy results confirmed the co-doping of Fe 2+ /Fe 3+ and Cu + /Cu 2+ into the lattice of γ-Al 2 O 3 through the bonds of AlOFe and AlOCu. With the iron and copper co-doped in γ-Al 2 O 3 , three-fold oxygen vacancies (V 0 ) could be achieved compared with that of non-metal catalysts, which was favorable for the reduction of iron and copper species. The 1Fe3Cu-γ-Al 2 O 3 with a Fe/Cu mass ratio of 1:3 exhibited the highest activity on Fenton-like degradation of 4-CP due to the synergistic effects of Fe and Cu by facilitating the electron transfer in the recycles of Cu + /Cu 2+ and Fe 2+ /Fe 3+ based on the results of X-ray photoelectron spectroscopy, cyclic voltammetry and electro paramagnetic resonance analysis. The utilization efficiency of H 2 O 2 was as high as 86.0% when 4-CP almost disappeared (i.e., 99.7 percent of 0.78 mM 4-CP) at 240 min and pH 7.0, additionally, their dechlorination and TOC removal efficiencies were 92.0% and 81.6%, respectively. The catalyst also displayed a good performance after 5th cycles. Furthermore, a possible mechanism for activation of OH on the catalyst surface was also proposed., (Copyright © 2018 Elsevier Ltd. All rights reserved.)