Zhang, Rui, Chang, Qing-Yu, Ma, Fang, Zeeshan, Muhammad, Yang, Ming-Lei, Sui, Zhi-Jun, Chen, De, Zhou, Xing-Gui, and Zhu, Yi-An
[Display omitted] • Substitution of transition metals for Cr increases the acidity of the adjacent O. • Linear scaling relations are established to identify the PDH activity descriptor. • High propylene selectivity of the M 1 -Cr 2 O 3 catalysts is achieved. • Cu 1 -Cr 2 O 3 is predicted to be the best catalyst for PDH among the 13 doped Cr 2 O 3. The catalytic behavior of M 1 -Cr 2 O 3 (M = Mn-Cu, Ru-Ag, and Os-Au) in propane dehydrogenation (PDH) has been studied by employing microkinetic modeling combined with results from periodic DFT + U calculations. Calculated results indicate that most of the single atoms concerned can be stably present on the Cr 2 O 3 surface. The adsorption energy calculations and Bader charge analysis demonstrate that the acidity of the O sites adjacent to the M sites would be enhanced upon doping, which in turn strengthens the atomic H adsorption and the co-adsorption of various PDH species. The surface H formation energy is identified as the reactivity descriptor for PDH over the M 1 -Cr 2 O 3 catalysts, and a volcano curve of the PDH activity is obtained. By calculating the difference between the propylene dehydrogenation and desorption barriers, it is found that some M 1 -Cr 2 O 3 catalysts show improved selectivity towards propylene, as compared to Cr 2 O 3. Comparison between the formation barriers of H 2 and H 2 O reveals that single-atom doping has no apparent negative effect on the catalytic stability of the Cr 2 O 3 surface. The Cu 1 -Cr 2 O 3 catalyst is finally identified as the most promising catalyst for PDH among the 13 M 1 -Cr 2 O 3 catalyst candidates, considering the catalytic activity, selectivity, stability, and cost. [ABSTRACT FROM AUTHOR]