Search

Selective catalytic reduction (SCR) of NO x with NH 3 has been widely used for the removal of NO x. Because of the inevitable disadvantages of conventional V 2 O 5 -WO 3 (MoO 3)/TiO 2 catalysts such as poor low-temperature SCR activity and toxicity of vanadium, as well as the high-cost and over-strong NH 3 adsorption of zeolite catalysts, the development of efficient and non-toxic metal oxide SCR catalysts is highly demanded. Previously, we have developed an environmentally-benign CeO 2 -SiO 2 mixed-oxide SCR catalyst (CeSi 2), which exhibited superior SO 2 resistance ability. However, the low-temperature SCR activity on CeSi 2 was not that satisfactory. In this work, we proposed a new strategy of Mo doping to improve the low-temperature SCR activity on CeSi 2 , which was very crucial for its practical application. By a simple co-precipitation method, a homogenous Mo-Ce-Si mixed-oxide catalyst was prepared. The Mo doping could significantly enhance the NH 3 -SCR activity on CeSi 2 below 250 °C, and the optimal catalyst was Mo 0.1 CeSi 2 , which could achieve 80% NO x conversion at 200 °C. Mo 0.1 CeSi 2 also exhibited superior N 2 selectivity and resistance to SO 2 /H 2 O poisoning. Via a series of characterizations, it was found that the redox properties and surface acidity on CeSi 2 by Mo doping, which accounted for the enhanced low-temperature NH 3 -SCR activity on Mo 0.1 CeSi 2. The reaction mechanism on Mo 0.1 CeSi 2 was also fully revealed by in situ DRIFTS experiments. This work provided a new insight for the development of efficient low-temperature SCR catalysts with superior SO 2 resistance ability. [Display omitted] • A homogeneous Mo-Ce-Si mixed-oxide catalyst was prepared. • Enhanced low-temperature NH 3 -SCR activity was achieved on Mo doped CeO 2 -SiO 2. • Mo-Ce-Si catalyst exhibited excellent resistance to SO 2 poisoning. • Surface acidity and redox properties of CeO 2 -SiO 2 were promoted by Mo doping. • NH 3 -SCR reaction on Mo-Ce-Si catalyst proceeds through E-R mechanism. [ABSTRACT FROM AUTHOR]

In this work, sulfation effect on NH3-SCR performance over CeO2 with different morphology (nanocubes and nanorods) was carefully studied. A morphology-sensitive sulfation effect on NH3-SCR activity was observed on CeO2. Interestingly, the NO removal efficiencies of CeO2 nanocubes and CeO2 nanorods got greatly enhanced after the sulfation at low-temperature range (< 350 °C). CeO2 nanorods exhibited a much higher NH3-SCR activity than that of CeO2 cubes. However, compared to CeO2 nanocubes, CeO2 nanorods suffered from a severe deactivation when sulfated at higher temperatures (> 350 °C). A series of characterizations such as N2 adsorption–desorption, XRD, HR-TEM, TG–DTA, Raman and in situ DRIFTS of SO2 + O2 adsorption were conducted to investigate the interactions between SO2 and nano-shaped CeO2. It was revealed that the morphology of CeO2 nanorods was damaged severely when sulfated at high temperature (> 350 °C), while the structure of CeO2 nanocubes was relatively stable under the same condition. Furthermore, more sulfate species were found on CeO2 nanorods than on CeO2 nanocubes, in particular of bulk like sulfate species. As a result, the NO removal efficiency of CeO2 nanorods declined greatly when sulfated at high temperature. [ABSTRACT FROM AUTHOR]

Modifying CeO 2 with acid sites is a common strategy for designing efficient catalysts for the selective catalytic reduction of NO x by NH 3 (NH 3 -SCR of NO x). However, the effect of acid metal oxide modification on the SO 2 resistance of CeO 2 has not been well revealed. In this work, it was found that the SO 2 resistance of CeO 2 modified with several acid metal oxides (i.e. , MoO 3 , WO 3 and Nb 2 O 5), followed an order of Mo/CeO 2 ≥ W/CeO 2 > Nb/CeO 2. Further systematic characterizations revealed that Mo-OH and W-OH on CeO 2 as Brønsted acid sites could better inhibit the SO 2 adsorption and the sulfation of active sites than highly dispersed NbO x mainly as Lewis acid sites because NH 4 + coordinated to Brønsted acid sites could help trap SO 2 to form ammonium sulfates rather than metal sulfates. The findings in this work provided important guidance for the design of efficient catalysts with superior SO 2 resistance performance. [Display omitted] • CeO 2 modified with varying acid metal oxides showed different resistance to SO 2. • Highly dispersed MoO 3 or WO 3 could better shield CeO 2 from SO 2 poisoning than Nb 2 O 5. • Mo and W sites as Brønsted acid sites could better inhibit the SO 2 adsorption on CeO 2. • SO 2 could interact with both highly dispersed Nb 2 O 5 and CeO 2 on Nb/CeO 2. • A strategy for designing efficient catalysts with superior resistance to SO 2 was provided. [ABSTRACT FROM AUTHOR]

[Display omitted] • A novel hybrid strategy is employed to design catalysts with superior K resistance. • The main reason for CeMn deactivation is cut-off of L-H mechanism resulting from the formation of stable nitrates. • The addition of ZSM-5 can re-activate the inert nitrates. • Alkali metals poisoned catalysts can be regenerated by ZSM-5 hybridization. The application of cerium-manganese oxides (CeMn) in controlling exhaust gas from biomass combustion is greatly inhibited due to poor resistance to alkali metals. Herein, we report a smart strategy to circumvent the K poisoning problem of CeMn by physically coupling with ZSM-5, which exhibited almost no activity loss even under a high loading of 2 wt % K 2 O. Results showed that in contrast to the conventionally believed disturbance of redox property and reduction of acid sites, the dominant effect from K loading on the deactivation of CeMn catalysts lies on the formation of chemically inert nitrates, which significantly restrains the reaction cycle via Langmuir-Hinshelwood route. With ZSM-5 hybridization, the stable nitrates over CeMn can be facilely activated and consumed by NH 4 + species introduced by ZSM-5, thus transforming poisoning sites into active sites and ensuring superior catalytic performance. The study presenting here not only provides an efficient strategy for fabricating NH 3 -SCR catalysts with superior K resistance but also sheds new light on the deactivation mechanism of K over CeMn catalysts. [ABSTRACT FROM AUTHOR]