Search

The subject of this paper is to construct a current-transformer (CT) model based on the Jiles-Atherton (J-A) theory of ferromagnetic hysteresis using transient analysis of control systems (TACS) functions within the Electromagnetic Transients Program (EMTP) in a closed-loop manner. The J-A theory of ferromagnetic hysteresis is presented by the nonlinear first-order ordinary differential equations and inclusive of five parameters that can be found by measurements of hysteresis characteristic. We can use TACS functions within EMTP to describe the J-A theory of ferromagnetic hysteresis. The powerful advantage of this way is the interaction between the electrical network and TACS in EMTP. Compared with the CT model based on the type 96 nonlinear hysteresis inductor, the simulated result of the CT model based on the J-A theory of ferromagnetic hysteresis is almost the same in steady-state situations, but apparently different in a fault transient situation. The analysis and simulation of the actual measured fault profiles in the Taiwan power system is an example of the validation of this proposed model. Therefore, this proposed CT model based on the J-A theory of ferromagnetic hysteresis has the analysis capability of the transient response. The flexibility of TACS makes the simulation of any other situation easier and is another advantage. [ABSTRACT FROM AUTHOR]

In this study, the non-dominated sorting genetic algorithm II (NSGA-II) is used to optimize the annual phase arrangement of distribution transformers connected to primary feeders to improve three-phase imbalance and reduce power loss. Based on the data of advanced metering infrastructure (AMI), a quasi-real-time ZIP load model and typical sample distribution systems in Taiwan are constructed. The equivalent circuit models and solution algorithms for typical distribution systems in Taiwan are built using the commercial software package MATLAB. A series of simulations, analyses, comparisons, and explorations is executed. Finally, the quantitative evaluation results for improving the voltage imbalance and reducing the power loss are summarized. For the series of studies, the percentage reductions in (1) total power imbalance T S I , (2) total line loss T L L , (3) average voltage drop A V D , (4) total voltage imbalance factors for zero/negative sequences T d 0 / T d 2 , and (5) neutral current of the main transformer I L C O are up to 45.48%, 4.06%, 16.61%, 63.99%, 21.33%, and 88.01%, respectively. The results obtained in this study can be applied for energy saving and can aid the authorities to implement sustainable development policies in Taiwan. [ABSTRACT FROM AUTHOR]