Search

Heparin-induced thrombocytopenia (HIT) is an immune complication of heparin therapy. Antibodies binding to complexes of platelet factor 4 (PF4) and heparin is the trigger of HIT. A method using size exclusion chromatography with multi-angle laser light scattering detector (SEC-MALS) was developed in this work. The soluble ultra-large complex (ULC) was separated from the small complex (SC) and their molecular weights (MWs) were firstly measured. The complexes of PF4 and three heparins with different MW, including unfractionated heparin (UFH), dalteparin (Daltep) and enoxaparin (Eno) were characterized using this method. The contents and the sizes of ULC increased gradually when heparins were added to PF4 to certain amounts. While, they reduced after more heparins were added. It is the first time to measure the MWs of the biggest ULC of PF4-heparins as millions of Dalton. at the proper ratios of PF4 to heparin (PHR). Meanwhile, those mixtures at those certain PHRs induced the higher expression of CD83 and CD14 markers on dendritic cells (DCs) suggesting that they had stronger immunogenicity and is critical for HIT., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Heparin （Hp） is the most widely used anticoagulant drug in the clinics， with an annual global output of over 10 billion dollars. Hp， a member of the glycosaminoglycans （GAGs）， is prepared from porcine intestinal mucosa via extraction， separation， and purification. Hp is a linear polysaccharide with repeating disaccharide units. Low-molecular-weight heparins （LMWHs） are depolymerized from Hp via chemical or enzymatic degradation. Compared with Hp， LMWHs exhibit less bleeding side effect， milder immunogenicity， and higher bioavailability when injected subcutaneously. In general， Hps， including LMWHs， are high complex drugs with large molecular weights （MWs）， inhomogeneous MW distributions， and structural heterogeneity， including different degrees and locations of sulfonation， and unique residues generated from different production processes. Thus， developing efficient analytical methods to elucidate the structures of Hps and characterize or quantitate their properties is extremely challenging. Unfortunately， this problem limits their quality control， production optimization， clinical safety monitoring， and new applications. Research has constantly sought to elucidate the complicated structures of Hp drugs. Among the structural analysis and quality control methods of Hp currently available， chromatographic methods are the most widely studied and used. However， no literature thoroughly summarizes the specific applications of chromatographic methods in the structural analysis， manufacturing process， and quality control of Hp drugs. This paper systematically organizes and describes recent research progresses of the chromatographic methods used to analyze Hp drugs， including the identification and composition of monosaccharides， disaccharides， oligosaccharides， and polysaccharides. The applications， innovations， and limitations of these chromatographic methods are also summarized in this review. The insights obtained in this study will help production and quality control personnel， as well as drug researchers， obtain a deeper understanding of the complex structures of Hp drugs. This paper also provides a comprehensive reference for the structural analysis and quality control of Hps， proposes ideas for the development of new quality control methods， and lays a strong foundation for the in-depth structural elucidation of Hp drugs.

Heparin, an old but first-line anticoagulant, has been used over a century. It is a heterogeneous, linear, highly sulfated, anionic glycosaminoglycan with a broad distribution in relative molecular weight and charge density. These structural properties allow heparin to selectively interact with multiple proteins, leading to heparin's various pharmacological functions, such as anticoagulant, anti-viral, anti-tumor and anti-inflammatory activities. Clinical data suggest that unfractionated heparin or low molecule weight heparin could decrease mortality in COVID-19 patients with sepsis-induced hypercoagulation through the anticoagulant, anti-viral and anti-inflammatory activities of these drugs. Thus, the non-anticoagulant activity of heparin has again aroused attention. This review highlights recent advances in the preparation of heparin-derived drugs and clinical research on its non-anticoagulant properties over the past decade, to further the development and utilization of these important drugs., (Copyright © 2022. Published by Elsevier Ltd.)

Heparin is a linear sulfated polysaccharide with a complex structure. It is important to figure out the sequences at the terminals of the sugar chains, as it will help us understand the heparin structure deeper and control its quality properly. The tetrasaccharide linkage region (LR) could be a tag to help us find out heparin terminals after digestion by different combinations of heparinases. In this work, orthogonal chromatographic approaches including SAX, SEC-MS and 2D-LC-MS were applied to qualitatively and quantitatively analyze the heparinase released LR-terminals. The disaccharides next to LR are those ones with low or non-sulfation, UA-GlcNAc and UA-GlcNAc6S, and then they are extended with the highly sulfated disaccharides, IdoA2S-GlcNS and IdoA2S-GlcNS6S. It is suggested that the sulfo transferases did not work at the sugar residues next to LR terminal, especially the 2-O-sulfo and N-sulfo transferases, which could be affected by steric hindrance from LR, when heparin is biosynthesized. This conclusion will be theoretical fundamental to help us understand heparin's structure deeper. The methods provided in this work could be potential ways to control heparin's quality and monitor the production processes of heparin properly., Competing Interests: Declaration of Competing Interest None., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Low molecular weight heparins (LMWHs), depolymerized from unfractionated heparin (UFH), are widely used as anticoagulant drugs in clinic. The variable degradation methods result the different types of LMWHs, such as enoxaparin prepared by alkaline degradation following benzylation and nadroparin degraded by nitrous acid and subsequent reduction. They have different anticoagulant activities, molecular weight and special oligosaccharide sequences. Oligosaccharide analysis of the heparinase-catalyzed digestion products of heparin and LMWHs is an important way to explore the fine structural composition. In this work, a MHC-2D-LC-MS system using SAX followed by SEC and tandem to MS was applied to analyze the heparinase-products of LMWHs. 15 components of enoxaparin and 20 components of nadroparin were separated and unambiguously characterized with mass spectrum, including eight common disaccharides, and the special structural domains resistant to enzyme digestion which have the 3-O sulfated residue and/or characteristic terminal residues and the linkage region tetrasaccharides., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Heparin is a linear sulfated polysaccharide. It is composed of a repeating disaccharide unit with different sulfo patterns. The compositional analysis after heparin was decomposed to disaccharides and enzyme resistant domains is an important way to delve into its structure. Strong anion exchange (SAX) chromatography is commonly used for the compositional analysis due to its high resolution, stability and capability of quantitation. However, nonvolatile salt in mobile phase is not compatible with MS, then the structural domains cannot be identified without standards. Here, a new two-dimensional liquid chromatography system, multiple heart cut (MHC), was developed and linked to mass spectrometry (MS) directly to provide a comprehensive analysis of enzyme digested heparin. SAX was applied as the first dimensional chromatography, in which 17 peaks were observed and integrated in the digested heparin. Size-exclusion chromatography (SEC) was used as the second dimensional chromatography to desalt efficiently. Structural information of each component was then obtained with MS, including eight common disaccharides, eight enzyme resistant tetrasaccharides and a heparin-core protein linkage domain. The comparison of enzyme digested heparins obtained from different vendors using this system suggested their similar major structure and activity, but slightly different production processes., Competing Interests: Declaration of Competing Interest There are no conflict of interest for authors., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Non-anticoagulant biological functions of heparin-based drugs have drawn increasing attention. However, the exploration into the non-anticoagulant activities of various low molecular weight heparins was associated with bleeding risks in clinical practice and often led to controversial conclusions due to the structural differences. In this study, we aimed to establish a process to produce a library of heparin derivatives with structural diversity and reduced/abolished anticoagulant activity through the combination of chemical modifications and enzymatic cleavage of heparins. The depolymerization characteristics of various selectively modified heparin derivatives by three heparinases were comprehensively analyzed. The order of periodate treatment and heparinase-I depolymerization was proved to significantly change the structural characteristics of the oligosaccharide products. Finally, among several heparin derivatives that screened in the bleomycin-induced cell apoptosis model, the low molecular weight partially 6-O-/N-desulfated heparins showed the strongest anti-apoptotic activities. This study provided a useful approach for future development of novel heparin-derivative medications., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Heparan sulfate (HS) and heparin are sulfated polysaccharides exhibiting diverse physiological functions. HS 6-O-sulfotransferase (6-OST) is a HS biosynthetic enzyme that transfers a sulfo group to the 6-OH position of glucosamine to synthesize HS with desired biological activities. Chemoenzymatic synthesis is a widely adopted method to obtain HS oligosaccharides to support biological studies. However, this method is unable to synthesize all possible structures due to the specificity of natural enzymes. Here, we report the use of an engineered 6-OST to achieve fine control of the 6-O-sulfation. Unlike wild type enzyme, the engineered 6-OST only sulfates the non-reducing end glucosamine residue. Utilizing the engineered enzyme and wild type enzyme, we successfully completed the synthesis of five hexasaccharides and one octasaccharide differing in 6-O-sulfation patterns. We also identified a hexasaccharide construct as a new anticoagulant drug candidate. Our results demonstrate the feasibility of using an engineered HS biosynthetic enzyme to prepare HS-based therapeutics.

Heparin is a polysaccharide anticoagulant drug isolated from animal tissues. There have been concerns on the safety and security of the heparin supply chain since 2007-8 when a contamination crisis led to its disruption. The current study applies a suite of modern analytical techniques to porcine, bovine and ovine intestinal mucosal heparins. These techniques include structural analysis by nuclear magnetic resonance spectrometry, disaccharide compositional analysis, bottom-up analysis of tetrasaccharides corresponding to heparin's antithrombin III binding site. Chemometric analysis was then applied to understand how these structural differences to predict the animal/tissue source of heparin and to help detect blending of heparins from various sources., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Heparin, a highly sulfated glycosaminoglycan, has been used as a clinical anticoagulant over 80 years. Low molecular weight heparins (LMWHs), heparins partially depolymerized using different processes, are widely used as clinical anticoagulants. Qualitative molecular weight (MW) and quantitative mass content analysis are two important factors that contribute to LMWH quality control. Size exclusion chromatography (SEC), relying on multiple angle laser scattering (MALS)/refractive index (RI) detectors, has been developed for accurate analysis of heparin MW in the absence of standards. However, the cations, which ion-pair with the anionic polysaccharide chains of heparin and LMWHs, had not been considered in previous reports. In this study, SEC with MALS/RI and inductively coupled plasma/mass spectrometry detectors were used in a comprehensive analytical approach taking both anionic polysaccharide and ion-paired cations heparin products. This approach was also applied to quantitative analysis of heparin and LMWHs. Full profiles of MWs and mass recoveries for three commercial heparin/LMWH products, heparin sodium, enoxaparin sodium and nadroparin calcium, were obtained and all showed higher MWs than previously reported. This important improvement more precisely characterized the MW properties of heparin/LMWHs and potentially many other anionic polysaccharides., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Rationale: Heparin and low molecular weight heparin (LMWH) are widely used as clinical anticoagulants. The determination of their composition and structural heterogeneity still challenges analysts., Methods: Disaccharide compositional analysis, utilizing heparinase-catalyzed depolymerization, is one of the most important ways to evaluate the sequence, structural composition and quality of heparin and LMWH. Hydrophilic interaction chromatography coupled with quadruple time-of-flight mass spectrometry (HILIC/QTOFMS) has been developed to analyze the resulting digestion products., Results: HILIC shows good resolution and excellent MS compatibility. Digestion products of heparin and LMWHs afforded up to 16 compounds that were separated using HILIC and analyzed semi-quantitatively. These included eight common disaccharides, two disaccharides derived from chain termini, three 3-O-sulfo-group-containing tetrasaccharides, along with three linkage region tetrasaccharides and their derivatives. Structures of these digestion products were confirmed by mass spectral analysis. The disaccharide compositions of a heparin, two batches of the LMWH, enoxaparin, and two batches of the LMWH, nadroparin, were compared. In addition to identifying disaccharides, 3-O-sulfo-group-containing tetrasaccharides, linkage region tetrasaccharides were observed having slightly different compositions and contents in these heparin products suggesting that they had been prepared using different starting materials or production processes., Conclusions: Thus, compositional analysis using HILIC/QTOFMS offers a unique insight into different heparin products., (Copyright © 2015 John Wiley & Sons, Ltd.)

The production of the anticoagulant drug heparin from non-animal sources has a number of advantages over the current commercial production of heparin. These advantages include better source material availability, improved quality control, and reduced concerns about animal virus or prion impurities. A bioengineered heparin would have to be chemically and biologically equivalent to be substituted for animal-sourced heparin as a pharmaceutical. In an effort to produce bioengineered heparin that more closely resembles pharmaceutical heparin, we have investigated a key step in the process involving the N-deacetylation of heparosan. The extent of N-deacetylation directly affects the N-acetyl/N-sulfo ratio in bioengineered heparin and also impacts its molecular weight. Previous studies have demonstrated that the presence and quantity of N-acetylglucosamine in the nascent glycosaminoglycan chain, serving as the substrate for the subsequent enzymatic modifications (C5 epimerization and O-sulfonation), can impact the action of these enzymes and, thus, the content and distribution of iduronic acid and O-sulfo groups. In this study, we control the N-deacetylation of heparosan to produce a bioengineered heparin with an N-acetyl/N-sulfo ratio and molecular weight that is similar to animal-sourced pharmaceutical heparin. The structural composition and anticoagulant activity of the resultant bioengineered heparin was extensively characterized and compared to pharmaceutical heparin obtained from porcine intestinal mucosa.

Porcine intestinal mucosa heparin was partially depolymerized by recombinant heparinase 1 (heparin lyase 1, originating from Flavobacterium heparinum and expressed in Escherichia coli) and then fractionated, leading to the isolation of 22 homogeneous oligosaccharides with sizes ranging from disaccharide to hexadecasaccharide. The purity of these oligosaccharides was determined by gel electrophoresis, strong anion exchange and reversed-phase ion-pairing high-performance liquid chromatography. The molecular mass of oligosaccharides was determined using electrospray ionization-mass spectrometry and their structures were elucidated using one- and two-dimensional nuclear magnetic resonance spectroscopy at 600 MHz. Five of the characterized oligosaccharides represent new compounds. The most prominent oligosaccharide comprises the common repeating unit of heparin, ΔUA2S-[-GlcNS6S-IdoA2S-](n)-GlcNS6S, where ΔUA is 4-deoxy-α-l-threo-hex-4-eno-pyranosyluronic acid, GlcN is 2-deoxy-2-amino-d-glucopyranose, IdoA is l-idopyranosyluronic acid, S is sulfate and n = 0-7. A second prominent heparin oligosaccharide motif corresponds to ΔUA2S-[GlcNS6S-IdoA2S](n)-GlcNS6S-IdoA-GlcNAc6S-GlcA-GlcNS3S6S (where n = 0-5 and GlcA is d-glucopyranosyluronic acid), a fragment of the antithrombin III binding site in heparin. The prominence of this second set of oligosaccharides and the absence of intact antithrombin III binding sites suggest that the -GlcNS3S6S-IdoA2S- linkage is particularly susceptible to heparinase 1.

Heparin lyase I (heparinase I) specifically depolymerizes heparin, cleaving the glycosidic linkage next to iduronic acid. Here, we show the crystal structures of heparinase I from Bacteroides thetaiotaomicron at various stages of the reaction with heparin oligosaccharides before and just after cleavage and product disaccharide. The heparinase I structure is comprised of a beta-jellyroll domain harboring a long and deep substrate binding groove and an unusual thumb-resembling extension. This thumb, decorated with many basic residues, is of particular importance in activity especially on short heparin oligosaccharides. Unexpected structural similarity of the active site to that of heparinase II with an (alpha/alpha)(6) fold is observed. Mutational studies and kinetic analysis of this enzyme provide insights into the catalytic mechanism, the substrate recognition, and processivity.

In 2008, heparin (active pharmaceutical ingredient, API) lots were associated with anaphylactoid-type reactions. Oversulfated chondroitin sulfate (OSCS), a semi-synthetic glycosaminoglycan (GAG), was identified as a contaminant and dermatan sulfate (DS) as an impurity. While DS has no known toxicity, OSCS was toxic leading to patient deaths. Heparins, prepared before these adverse reactions, needed to be screened for impurities and contaminants. Heparins were analyzed using high-field (1)H-NMR spectroscopy. Heparinoids were mixed with a pure heparin and analyzed by (1)H-NMR to assess the utility of (1)H-NMR for screening heparin adulterants. Sensitivity of heparinoids to deaminative cleavage, a method widely used to depolymerize heparin, was evaluated with polyacrylamide gel electrophoresis to detect impurities and contaminants, giving limits of detection (LOD) ranging from 0.1% to 5%. Most pharmaceutical heparins prepared between 1941 and 2008 showed no impurities or contaminants. Some contained DS, CS, and sodium acetate impurities. Heparin prepared in 2008 contained OSCS contaminant. Heparin adulterated with heparinoids showed additional peaks in their high-field (1)H-NMR spectra, clearly supporting NMR for monitoring of heparin API with an LOD of 0.5-10%. Most of these heparinoids were stable to nitrous acid treatment suggesting its utility for evaluating impurities and contaminants in heparin API., ((c) 2009 Wiley-Liss, Inc. and the American Pharmacists Association)

Heparin is a widely used anticoagulant and antithrombotic agent. Recently, a contaminant, oversulfated chondroitin sulfate (OSCS), was discovered within heparin preparations. The presence of OSCS within heparin likely led to clinical manifestations, most prevalently, hypotension and abdominal pain leading to the deaths of several dozens of patients. Given the biological effects of OSCS, one continuing item of concern is the ability for existing methods to identify other persulfonated polysaccharide compounds that would also have anticoagulant activity and would likely elicit a similar activation of the contact system. To complete a more extensive analysis of the ability for NMR and capillary electrophoresis (CE) to capture a broader array of potential contaminants within heparin, we completed a systematic study of NMR, both mono- and bidimensional, and CE to detect both various components of sidestream heparin and their persulfonated derivatives. We show that given the complexity of heparin samples, and the requirement to ensure their purity and safety, use of orthogonal analytical techniques is effective at detecting an array of potential contaminants that could be present.

Heparan sulfate (HS) proteoglycans (PGs) interact with a number of extracellular signaling proteins, thereby playing an essential role in the regulation of many physiological processes. One major function of HS is to interact with fibroblast growth factors (FGFs) and their receptors (FGFRs) and form FGF.HS.FGFR signaling complexes. Past studies primarily examined the selectivity of HS for FGF or FGFR. In this report, we used a new strategy to study the structural specificity of HS binding to 10 different FGF.FGFR complexes. Oligosaccharide libraries prepared from heparin, 6-desulfated heparin, and HS were used for the interaction studies by solution competition surface plasmon resonance (SPR) and filter trapping assays. Specific oligosaccharides binding to FGF.FGFR complexes were subjected to polyacrylamide gel electrophoresis (PAGE) analysis and disaccharide compositional analysis using liquid chromatography and mass spectrometry. The competition SPR studies using sized oligosaccharide mixtures showed that binding of each of the tested FGFs or FGF.FGFR complexes to heparin immobilized to an SPR chip was size-dependent. The 6-desulfated heparin oligosaccharides exhibited a reduced level of inhibition of FGF and FGF.FGFR complex binding to heparin in the competition experiments. Heparin and the 6-desulfated heparin exhibited higher levels of inhibition of the FGF.FGFR complex binding to heparin than of FGF binding to heparin. In the filter trapping experiments, PAGE analysis showed different affinities between the FGF.FGFR complexes and oligosaccharides. Disaccharide analysis showed that HS disaccharides with a degree of polymerization of 10 (dp10) had high binding selectivity, while dp10 heparin and dp10 6-desulfated heparin showed reduced or no selectivity for the different FGF.FGFR complexes tested.

An oversulfated chondroitin sulfate (OSCS) was identified as a contaminant to pharmaceutical heparin and severe anaphylactoid reactions were ascribed to this contaminant. An examination of the biochemistry underlying both the anticoagulant activity and the toxic effects of oversulfated chondroitin sulfate was undertaken. This study demonstrates that the anticoagulant activity of this oversulfated chondroitin sulfate is primarily dependent on heparin cofactor II mediated inhibition of thrombin. Heparin and oversulfated chondroitin sulfate binding to coagulation, kinin-kallikrein and complement proteins were studied by surface plasmon resonance. While oversulfated chondroitin sulfate binds tightly to antithrombin III, unlike heparin, OSCS does not induce antithrombin III to undergo the conformational change required for its inactivation of thrombin and factor Xa. In contrast to heparin, oversulfated chondroitin sulfate tightly binds factor XIIa suggesting a biochemical mechanism for the factor XIIa-based enhancement of vasoactive bradykinin production.

Heparin is unique as one of the oldest drugs currently still in widespread clinical use as an anticoagulant, a natural product, one of the first biopolymeric drugs, and one of the few carbohydrate drugs. Recently, certain batches of heparin have been associated with anaphylactoid-type reactions, some leading to hypotension and death. These reactions were traced to contamination with a semi-synthetic oversulfated chondroitin sulfate (OSCS). This Highlight reviews the heparin contamination crisis, its resolution, and the lessons learned. Pharmaceutical scientists now must consider dozens of natural and synthetic heparinoids as potential heparin contaminants. Effective assays, which can detect both known and unknown contaminants, are required to monitor the quality of heparin. Safer and better-regulated processes are needed for heparin production.

We report the first chemoenzymatic synthesis of the stable isotope-enriched heparin from a uniformly labeled [(13)C,(15)N]N-acetylheparosan (-GlcA(1,4)GlcNAc-) prepared from E. coli K5. Glycosaminoglycan (GAG) precursors and heparin were formed from N-acetylheparosan by the following steps: chemical N-deacetylation and N-sulfonation leading to N-sulfoheparosan (-GlcA(1,4)GlcNS-); enzyme-catalyzed C5-epimerization and 2-O-sulfonation leading to undersulfated heparin (-IdoA2S(1,4)GlcNS-); enzymatic 6-O-sulfonation leading to the heparin backbone (-IdoA2S(1,4)GlcNS6S-); and selective enzymatic 3-O-sulfonation leading to the anticoagulant heparin, containing the GlcNS6S3S residue. Heteronuclear, multidimensional nuclear magnetic resonance spectroscopy was employed to analyze the chemical composition and solution structure of [(13)C,(15)N]N-acetylheparosan, precursors, and heparin. Isotopic enrichment was found to provide well-resolved (13)C spectra with the high sensitivity required for conformational studies of these biomolecules. Stable isotope-labeled heparin was indistinguishable from heparin derived from animal tissues and is a novel reagent for studying the interaction of heparin with proteins.

Recently, certain lots of heparin have been associated with an acute, rapid onset of serious side effects indicative of an allergic-type reaction. To identify potential causes for this sudden rise in side effects, we examined lots of heparin that correlated with adverse events using orthogonal high-resolution analytical techniques. Through detailed structural analysis, the contaminant was found to contain a disaccharide repeat unit of glucuronic acid linked beta1-->3 to a beta-N-acetylgalactosamine. The disaccharide unit has an unusual sulfation pattern and is sulfated at the 2-O and 3-O positions of the glucuronic acid as well as at the 4-O and 6-O positions of the galactosamine. Given the nature of this contaminant, traditional screening tests cannot differentiate between affected and unaffected lots. Our analysis suggests effective screening methods that can be used to determine whether or not heparin lots contain the contaminant reported here.

Porcine intestinal mucosa heparin was partially depolymerized by recombinant heparinase 1 (heparin lyase 1, originating from Flavobacterium heparinum and expressed in Escherichia coli) and then fractionated, leading to the isolation of 22 homogeneous oligosaccharides with sizes ranging from disaccharide to hexadecasaccharide. The purity of these oligosaccharides was determined by gel electrophoresis, strong anion exchange and reversed-phase ion-pairing high-performance liquid chromatography. The molecular mass of oligosaccharides was determined using electrospray ionization-mass spectrometry and their structures were elucidated using one- and two-dimensional nuclear magnetic resonance spectroscopy at 600 MHz. Five of the characterized oligosaccharides represent new compounds. The most prominent oligosaccharide comprises the common repeating unit of heparin, ΔUA2S-[-GlcNS6S-IdoA2S-]n-GlcNS6S, where ΔUA is 4-deoxy-α-l-threo-hex-4-eno-pyranosyluronic acid, GlcN is 2-deoxy-2-amino-d-glucopyranose, IdoA is l-idopyranosyluronic acid, S is sulfate and n = 0–7. A second prominent heparin oligosaccharide motif corresponds to ΔUA2S-[GlcNS6S-IdoA2S]n-GlcNS6S-IdoA-GlcNAc6S-GlcA-GlcNS3S6S (where n = 0–5 and GlcA is d-glucopyranosyluronic acid), a fragment of the antithrombin III binding site in heparin. The prominence of this second set of oligosaccharides and the absence of intact antithrombin III binding sites suggest that the -GlcNS3S6S-IdoA2S- linkage is particularly susceptible to heparinase 1. [ABSTRACT FROM AUTHOR]

Abstract: The sulfo groups of glycosaminoglycans contribute to their high charge densities, and are critical for the role they play in various physiological and pathophysiological processes. Unfortunately, the sulfo groups can be hydrolyzed to inorganic sulfate. Thus, it is important to monitor the presence of these sulfo groups. In addition, free anions, including chloride, sulfate and acetate, are often present in glycosaminoglycans as a result of multiple purification steps, and their presence also needs to be monitored. In this report, ion chromatography with conductivity detection is used to analyze the anions present in glycosaminoglycans, including heparin, heparan sulfate, chondroitin sulfate and dermatan sulfate. This method allows quantitation over a wide range of concentrations, affording a limit of quantitation of 0.1ppm and a limit of detection of 0.05ppm for most anions of interest. The stability of heparin was also studied, providing data on the formation of both sulfate and acetate anions. [Copyright &y& Elsevier]

Highlights • A method was developed to analyze the complex patterns of enoxaparin/PF4. • The analytical method was developed based on size-exclusion chromatography. • Stability, incubation time and ratios of enoxaparin/FP4 was investigated. • This method monitors the capacity of enoxaparin forming complexes with PF4. Abstract Heparin, a highly sulfated glycosaminoglycan, has been used as a clinical anticoagulant over 80 years. However, heparin-induced thrombocytopenia and thrombosis (HITT) is a serious side effect of heparin therapy, resulting in relatively high risk of amputation and even death. HITT is caused by forming of complexes between heparin and platelet factor 4 (PF4). Enoxaparin, one of the most commonly used low molecular weight heparin (LMWH), were developed in 1980's. The lower molecular weight of enoxaparin reduces the risk of HITT by binding to less PF4. To detect the binding capacity between enoxaparin and PF4 could be an effect way to control this risk before it goes to patients. In this work, a size exclusion chromatography (SEC) method was developed to analyze the patterns of complexes formed between PF4 and enoxaparin. The chromatographic condition was optimized to separate PF4, enoxaparin, ultra-large complexes and small complexes. The linearity and stability of this method were confirmed. The impacts of PF4/enoxaparin mixture ratios and incubation time on the forming complexes were investigated. Four enoxaparin samples were analyzed with this method to verify its practicability. It is a robust, accurate and practicable method, and provides an easy way to monitor the capacity of enoxaparin forming complexes with PF4, suggesting the HITT related quality of enoxaparin. [ABSTRACT FROM AUTHOR]

Low molecular weight heparins (LMWHs), derived from unfractionated heparin (UFH) by chemical or enzymatic degradation, have lower side effects than that of heparin. Enoxaparin, nadroparin, and dalteparin are the most widely used LMWHs. Nadroparin and dalteparin are prepared through nitrous acid degradation followed by a subsequent reduction process, in which specific residue, 2,5-anhydro- d -mannitol (An-Man), is formed at the reducing terminals of generated sugar chains. However, few practicable analytical method was available to analyze An-Man qualitatively and quantitatively. In this work, a HPAEC-PAD-MS method was developed to analyze monosaccharides in heparin and LMWHs, especially An-Man. An ion suppressor is set up between HPAEC and MS to remove the nonvolatile salts from HPAEC and make the elute compatible to MS. Various monosaccharides were separated well with HPAEC. Online MS and MS/MS confirmed all sugar residues in the hydrolysates of heparin samples. The specific residue, An-Man, was only observed in the hydrolysates of LMWHs prepared with nitrous acid degradation and reduction. In addition, major glucosamine and minor arabinose/galactose were observed in all heparin samples. The amounts of these sugar residues were quantitated with PAD, simultaneously. The ratio of glucosamine to An-Man could be used to calculate the molecular weight of LMWHs. The calculated values are comparable to the value measured with size-exclusion chromatography-multiple angle laser scattering detection. Higher the ratio of glucosamine to An-Man higher the molecular weight. The HPAEC-PAD-MS platform is an accurate, precise and efficient way to identify LMWHs by determination of An-Man. It is also an alternative method to detect the MWs of LMWHs having An-Man for quality control purposes. [ABSTRACT FROM AUTHOR]

[Display omitted] • Two fractions (A and C) of GAGs from porcine jejunum and duodenum were purified. • A is a heparan sulfate, and C is composed of β- d -GlcA-(1 → 4) and β- d -GalNAc-(1 → 3). • They possessed controllable anti-coagulant activity in vitro. • Additional sulfate modification enhanced the effect. To make full use of the porcine sources and develop better choice of novel GAGs as anti-coagulants, two fractions of GAGs from the porcine jejunum (A) and duodenum (C) have been separated & purified. The products were further sulfated to give B and D in order to test the influence of sulfate pattern on the bioactivity. The results showed that the relative molecular weight range of A was 3000–50,000 (Mw, g/mol), whereas C had an average molecular weight of 75,885 (Mw, g/mol). A was identified as a novel heparan sulfate through enzymatic hydrolysis analysis. C was a chondroitin like polysaccharide mainly composed of β - d -GlcA-(1 → 4) and β - d -GalNAc-(1 → 3). A possessed controllable anti-coagulant activity (7 IU/mg) in vitro. The activity of D almost achieved the same magnitude of A. This study demonstrated the anticoagulant potential of the polysaccharides, providing solid foundation for development of anti-coagulants from porcine intestine. [ABSTRACT FROM AUTHOR]