Search

Highlights: [•] Advanced and economical production of biobutanol. [•] Continuous two stage fermentation with integrated liquid–liquid recovery technique. [•] Utilization of lignocellulosic sugar mixture (pentoses and hexoses). [•] Long run system operation with high solvent productivity (10.85g/Lh) and yield. [•] Can be integrated to the wood based biorefinery to make it industrially feasible. [ABSTRACT FROM AUTHOR]

Abstract: SO2–ethanol–water (SEW) spent liquor from spruce chips was successfully used for batch and continuous production of acetone, butanol and ethanol (ABE). Initially, batch experiments were performed using spent liquor to check the suitability for production of ABE. Maximum concentration of total ABE was found to be 8.79g/l using 4-fold diluted SEW liquor supplemented with 35g/l of glucose. The effect of dilution rate on solvent production, productivity and yield was studied in column reactor consisting of immobilized Clostridium acetobutylicum DSM 792 on wood pulp. Total solvent concentration of 12g/l was obtained at a dilution rate of 0.21h−1. The maximum solvent productivity (4.86g/lh) with yield of 0.27g/g was obtained at dilution rate of 0.64h−1. Further, to increase the solvent yield, the unutilized sugars were subjected to batch fermentation. [Copyright &y& Elsevier]

Acetone being a non-fuel solvent produced during the traditional acetone-butanol-ethanol (ABE) fermentation by Clostridium acetobutylicum ; reduces the overall fuel alcohol yield. However, the conversion of acetone into isopropanol has been recommended to improve the process economy. The present study aims to develop an engineered C. acetobutylicum DSM 792 strain to convert acetone into isopropanol by introducing the secondary alcohol dehydrogenase gene from Clostridium beijerinckii NRRL B593 using the allele-coupled exchange approach. Batch and continuous fermentation experiments were carried out with a modified strain C. acetobutylicum DSM 792-ADH to improve the isopropanol yield and titer. The growth and production behavior of the modified strain in stationary flask culture and controlled batch culture was studied. Almost 50% of acetone was converted into isopropanol with highest total solvent yield to be 0.39 g g −1 glucose. The modified strain also utilized sugar mixture and SO 2 –ethanol–water spent liquor as a substrate to produce the solvents. [ABSTRACT FROM AUTHOR]

The co-production of acetone during traditional butanol fermentation (acetone–butanol–ethanol) lowers the yield of alcohol biofuels. The present study was aimed to develop an improved Clostridium acetobutylicum strain with enhanced alcohol fuel production capability. The previously developed IBE (isopropanol-butanol-ethanol) producing C. acetobutylicum DSM792-ADH strain was further optimized to enhance the solvent productivity and yield. Immobilized cell column reactor was used to investigate the effect of dilution rate on IBE fermentation. Pure glucose, artificial sugar mixture and SEW spent liquor from spruce chips were used as substrates to study the behavior of the modified microorganism. The highest total solvent concentrations of approximately 10.60 g l −1 , 10 g l −1 and 6 g l −1 were obtained when glucose, sugar mixture and SEW spent liquor were used as substrates respectively. The modified microorganism could effectively utilize the lignocellulosic biomass hydrolyzate (SEW spent liquor) to yield a solvent productivity of 1.67 g l −1 h −1 . [ABSTRACT FROM AUTHOR]

Highlights: [•] Carbohydrate profiling of Coleus forskohlii root. [•] Utilization of Coleus forskohlii root biomass for bioethanol production. [•] Immobilization of yeast on wood chips. [•] Continuous lignocellulosic fermentation to produce bioethanol. [ABSTRACT FROM AUTHOR]