Search

Loop-mediated isothermal amplification (LAMP) has been widely used to detect many infectious diseases. However, minor inconveniences during the steps of adding reaction ingredients and lack of simple color results hinder point-of-care detection. We therefore invented a fluorometric paper-based LAMP by incorporating LAMP reagents, including a biotinylated primer, onto a cellulose membrane paper, with a simple DNA fluorescent dye incubation that demonstrated rapid and accurate results parallel to quantitative polymerase chain reaction (qPCR) methods. This technology allows for instant paper strip detection of methicillin-resistant Staphylococcus aureus (MRSA) in the laboratory and clinical samples. MRSA represents a major public health problem as it can cause infections in different parts of the human body and yet is resistant to commonly used antibiotics. In this study, we optimized LAMP reaction ingredients and incubation conditions following a central composite design (CCD) that yielded the shortest reaction time with high sensitivity. These CCD components and conditions were used to construct the paper-based LAMP reaction by immobilizing the biotinylated primer and the rest of the LAMP reagents to produce the ready-to-use MRSA diagnostic device. Our paper-based LAMP device could detect as low as 10 ag (equivalent to 1 copy) of the MRSA gene mecA within 36-43 min, was evaluated using both laboratory (individual cultures of MRSA and non-MRSA bacteria) and clinical blood samples to be 100% specific and sensitive compared to qPCR results, and had 35 day stability under 25 °C storage. Furthermore, the color readout allows for quantitation of MRSA copies. Hence, this device is applicable for point-of-care MRSA detection.

BackgroundBrucellosis, as a serious zoonotic infectious disease, has been recognized as a re-emerging disease in the developing countries worldwide. In china, the incidence of brucellosis is increasing each year, seriously threatening the health of humans as well as animal populations. Despite a quite number of diagnostic methods currently being used for brucellosis, innovative technologies are still needed for its rapid and accurate diagnosis, especially in area where traditional diagnostic is unavailable.Methodology/principal findingsIn this study, a total of 22 B cell linear epitopes were predicted from five Brucella outer membrane proteins (OMPs) using an immunoinformatic approach. These epitopes were then chemically synthesized, and with the method of indirect ELISA (iELISA), each of them displayed a certain degree of capability in identifying human brucellosis positive sera. Subsequently, a fusion protein consisting of the 22 predicted epitopes was prokaryotically expressed and used as diagnostic antigen in a newly established brucellosis testing method, nano-ZnO modified paper-based ELISA (nano-p-ELISA). According to the verifying test using a collection of sera collected from brucellosis and non-brucellosis patients, the sensitivity and specificity of multiepitope based nano-p-ELISA were 92.38% and 98.35% respectively. The positive predictive value was 98.26% and the negative predictive value was 91.67%. The multiepitope based fusion protein also displayed significantly higher specificity than Brucella lipopolysaccharide (LPS) antigen.ConclusionsB cell epitopes are important candidates for serologically testing brucellosis. Multiepitope fusion protein based nano-p-ELISA displayed significantly sensitivity and specificity compared to Brucella LPS antigen. The strategy applied in this study will be helpful to develop rapid and accurate diagnostic method for brucellosis in human as well as animal populations.

The Centers for Medicare & Medicaid Services' Severe Sepsis and Septic Shock Early Management Bundle (SEP-1) measure has appropriately established sepsis as a national priority. However, the Infectious Diseases Society of America (IDSA and five additional endorsing societies) is concerned about SEP-1's potential to drive antibiotic overuse because it does not account for the high rate of sepsis overdiagnosis and encourages aggressive antibiotics for all patients with possible sepsis, regardless of the certainty of diagnosis or severity of illness. IDSA is also concerned that SEP-1's complex "time zero" definition is not evidence-based and is prone to inter-observer variation. In this position paper, IDSA outlines several recommendations aimed at reducing the risk of unintended consequences of SEP-1 while maintaining focus on its evidence-based elements. IDSA's core recommendation is to limit SEP-1 to septic shock, for which the evidence supporting the benefit of immediate antibiotics is greatest. Prompt empiric antibiotics are often appropriate for suspected sepsis without shock, but IDSA believes there is too much heterogeneity and difficulty defining this population, uncertainty about the presence of infection, and insufficient data on the necessity of immediate antibiotics to support a mandatory treatment standard for all patients in this category. IDSA believes guidance on managing possible sepsis without shock is more appropriate for guidelines that can delineate the strengths and limitations of supporting evidence and allow clinicians discretion in applying specific recommendations to individual patients. Removing sepsis without shock from SEP-1 will mitigate the risk of unnecessary antibiotic prescribing for noninfectious syndromes, simplify data abstraction, increase measure reliability, and focus attention on the population most likely to benefit from immediate empiric broad-spectrum antibiotics.

Coronavirus Disease 2019 (COVID-19) has infected more than 3.0 million people worldwide and killed more than 200,000 as of April 27, 2020. In this White Paper, we address the cardiovascular co-morbidities of COVID-19 infection; the diagnosis and treatment of standard cardiovascular conditions during the pandemic; and the diagnosis and treatment of the cardiovascular consequences of COVID-19 infection. In addition, we will also address various issues related to the safety of healthcare workers and the ethical issues related to patient care in this pandemic.

Arthropod-borne arboviral diseases—including dengue, Zika, and chikungunya—place a substantial burden on the health of populations, globally. Dengue alone is endemic in more than 100 countries and causes more than 96 million symptomatic cases and approximately 40,000 deaths annually. The recent surge in arboviral disease outbreaks, coupled with the World Health Organization’s newly published vector control guidelines, accentuates the imperative to understand the dispersion of disease-carrying mosquitoes across diverse spatial and temporal scales. However, traditional surveillance mechanisms often fall short because of workforce limitations, logistical complexities, jurisdictional boundaries, and budgetary constraints, especially in low- and low-middle-income countries. In this article, we systematically report the design, implementation, and iterative enhancement of a groundbreaking school-based citizen science initiative for augmenting mosquito surveillance in the Solomon Islands. Key reflections encompass the initiative’s role in supporting routine government-led disease vector monitoring, sustainability through integration and fostering participant engagement, and the amalgamation of citizen-collected data with government surveillance activities. The article also discusses the impact of the citizen science initiative with regard to the Solomon Islands’ pursuit of the Sustainable Development Goals. Our findings underscore the potential of citizen science methods to support and extend public health surveillance activities and to serve as a community-engagement-for-behaviour-change tool in resource-constrained contexts.

Breakthrough invasive fungal infections (IFIs) have emerged as a significant problem in patients receiving systemic antifungals; however, consensus criteria for defining breakthrough IFI are missing. This position paper establishes broadly applicable definitions of breakthrough IFI for clinical research. Representatives of the Mycoses Study Group Education and Research Consortium (MSG-ERC) and the European Confederation of Medical Mycology (ECMM) reviewed the relevant English literature for definitions applied and published through 2018. A draft proposal for definitions was developed and circulated to all members of the two organisations for comment and suggestions. The authors addressed comments received and circulated the updated document for approval. Breakthrough IFI was defined as any IFI occurring during exposure to an antifungal drug, including fungi outside the spectrum of activity of an antifungal. The time of breakthrough IFI was defined as the first attributable clinical sign or symptom, mycological finding or radiological feature. The period defining breakthrough IFI depends on pharmacokinetic properties and extends at least until one dosing interval after drug discontinuation. Persistent IFI describes IFI that is unchanged/stable since treatment initiation with ongoing need for antifungal therapy. It is distinct from refractory IFI, defined as progression of disease and therefore similar to non-response to treatment. Relapsed IFI occurs after treatment and is caused by the same pathogen at the same site, although dissemination can occur. These proposed definitions are intended to support the design of future clinical trials and epidemiological research in clinical mycology, with the ultimate goal of increasing the comparability of clinical trial results.

Herein, we report results of the studies relating to the development of an impedimetric, magnetic bead-assisted supersandwich DNA hybridization assay for ultrasensitive detection of Neisseria gonorrhoeae, the causative agent of a sexually transmitted infection (STI), gonorrhea. First, a conductive ink was formulated by homogenously dispersing carboxylated multiwalled carbon nanotubes (cMWCNTs) in a stable emulsion of terpineol and an aqueous suspension of carboxymethyl cellulose (CMC). The ink, labeled C5, was coated onto paper substrates to fabricate C5@paper conductive electrodes. Thereafter, a magnetic bead (MB)-assisted supersandwich DNA hybridization assay was optimized against the porA pseudogene of N. gonorrhoeae. For this purpose, a pair of specific 5′ aminated capture probes (SCP) and supersandwich detector probes (SDP) was designed, which allowed the enrichment of target gonorrheal DNA sequence from a milieu of substances. The SD probe was designed such that instead of 1:1 binding, it allowed the binding of more than one T strand, leading to a ‘ladder-like’ DNA supersandwich structure. The MB-assisted supersandwich assay was integrated into the C5@paper electrodes for electrochemical analysis. The C5@paper electrodes were found to be highly conductive by a four-probe conductivity method (maximum conductivity of 10.1 S·cm−1). Further, the biosensing assay displayed a wide linear range of 100 aM-100 nM (109 orders of magnitude) with an excellent sensitivity of 22.6 kΩ·(log[concentration])−1. The clinical applicability of the biosensing assay was assessed by detecting genomic DNA extracted from N. gonorrhoeae in the presence of DNA from different non-gonorrheal bacterial species. In conclusion, this study demonstrates a highly sensitive, cost-effective, and label-free paper-based device for STI diagnostics. The ink formulation prepared for the study was found to be highly thixotropic, which indicates that the paper electrodes can be screen-printed in a reproducible and scalable manner.

Despite progress in antimicrobial drug development, a critical need persists for new, feasible pathways to develop antibacterial agents to treat people infected with drug-resistant bacteria. Infections due to resistant gram-negative bacilli continue to cause unacceptable morbidity and mortality rates. Antibacterial agents have been historically studied in noninferiority clinical trials that focus on a single site of infection (eg, complicated urinary tract infections, intra-abdominal infections), yet these designs may not be optimal, and often are not feasible, for study of infections caused by drug-resistant bacteria. Over the past several years, multiple stakeholders have worked to develop consensus regarding paths forward with a goal of facilitating timely conduct of antimicrobial development. Here we advocate for a novel and pragmatic approach and, toward this end, present feasible trial designs for antibacterial agents that could enable conduct of narrow-spectrum, organism-specific clinical trials and ultimately approval of critically needed new antibacterial agents.

Pathogenic bacteria and other microorganisms pose a potent threat to humans by causing various infectious diseases. To control the spread of infection, different antibacterial products have been developed. However, most of them are known to be associated with health hazards, environmental pollution, complex fabrication, and/or higher cost. To address these issues, in this study, a low cost, biodegradable and human skin compatible antibacterial paper has been developed. A quaternary ammonium compound, benzalkonium chloride (BKC) has been used for paper surface treatment. The concentration of aqueous solution of BKC coated on paper was varied from 0.1 wt% to 0.2 wt%. No external binder was required for coating BKC onto paper. The efficacy of the coated paper was investigated against Staphylococcus aureus ATCC 6538 and Escherichia coli ATCC 8739 bacterial strains. This antibacterial paper is highly effective against both strains with the concentrations of BKC being within the allowable limit for cytotoxic effects. The optimum concentration of BKC coated on paper can be considered as 0.15 wt%, as nearly 100% inhibition was achieved with it against both strains. The developed antibacterial paper is suitable for being used in the industry for disinfection and food packaging purposes, and also by the public for hand sanitization.

Microfluidic paper-based analytical devices (µPADs) have become promising tools offering various analytical applications for chemical and biological assays at the point-of-care (POC). Compared to traditional microfluidic devices, µPADs offer notable advantages; they are cost-effective, easily fabricated, disposable, and portable. Because of our better understanding and advanced engineering of µPADs, multistep assays, high detection sensitivity, and rapid result readout have become possible, and recently developed µPADs have gained extensive interest in parallel analyses to detect biomarkers of interest. In this review, we focus on recent developments in order to achieve µPADs with high-throughput capability. We discuss existing fabrication techniques and designs, and we introduce and discuss current detection methods and their applications to multiplexed detection assays in relation to clinical diagnosis, drug analysis and screening, environmental monitoring, and food and beverage quality control. A summary with future perspectives for µPADs is also presented.

Outbreaks of infectious diseases can occur after natural disasters as vital services are disrupted and populations move into evacuation centres. National notifiable disease surveillance may be inadequate in these situations because of resource-consuming disease confirmation or system interruptions. Although syndromic surveillance has been used as an alternative in post-disaster situations, no systematic evaluations of it have been published. We evaluated the ad hoc paper-based syndromic surveillance system implemented in evacuation centres in Ibaraki prefecture after the 2011 Great East Japan Earthquake and Tsunami. We assessed the simplicity, acceptability, data quality, timeliness and portability of this system and reviewed its usefulness. We concluded that the system was simple, acceptable, portable and useful. The documentation and monitoring of disease events and trends were useful for developing interventions in evacuation centres and have since been used to improve post-disaster infectious disease and surveillance knowledge in Japan. We believe timeliness was a challenge due to the chain of data transmission and communication passing through an intermediary. Future implementations of this system could consider a more direct chain of data transmission and communication from collectors to analysers. Too few key informant interviewees and the inability to obtain original paper-based data from evacuation centres limited our findings; we conducted this evaluation four years after the response occurred. Future evaluations should be completed closer to when operations cease. The usefulness of the system suggests adopting it in future disasters. A simple, plain-language manual should be developed to improve future employment.

Background: Global estimates for cholera annually approximate 4 million cases worldwide with 95,000 deaths. Recent outbreaks, including Haiti and Yemen, are reminders that cholera is still a global health concern. Cholera outbreaks can rapidly induce high death tolls by overwhelming the capacity of health facilities, especially in remote areas or areas of civil unrest. Recent studies demonstrated that stool specimens preserved on filter paper facilitate molecular analysis of Vibrio cholerae in resource limited settings. Specimens preserved in a rapid, low-cost, safe and sustainable manner for sequencing provides previously unavailable data about circulating cholera strains. This may ultimately provide new information to shape public policy response on cholera control and elimination. Methodology/Principal findings: Whole genome sequencing (WGS) recovered close to a complete sequence of the V. cholerae O1 genome with satisfactory genome coverage from stool specimens enriched in alkaline peptone water (APW) and V. cholerae culture isolates, both spotted on filter paper. The minimum concentration of V. cholerae DNA sufficient to produce quality genomic information was 0.02 ng/μL. The genomic data confirmed the presence or absence of genes of epidemiological interest, including cholera toxin and pilus loci. WGS identified a variety of diarrheal pathogens from APW-enriched specimen spotted filter paper, highlighting the potential for this technique to explore the gut microbiome, potentially identifying co-infections, which may impact the severity of disease. WGS demonstrated that these specimens fit within the current global cholera phylogenetic tree, identifying the strains as the 7th pandemic El Tor. Conclusions: WGS results allowed for mapping of short reads from APW-enriched specimen and culture isolate spotted filter papers this provided valuable molecular epidemiological sequence information on V. cholerae strains from remote, low-resource settings. These results identified the presence of co-infecting pathogens while providing rare insight into the specific V. cholerae strains causing outbreaks in cholera-endemic areas. [ABSTRACT FROM AUTHOR]

Pathogenic bacteria and other microorganisms pose a potent threat to humans by causing various infectious diseases. To control the spread of infection, different antibacterial products have been developed. However, most of them are known to be associated with health hazards, environmental pollution, complex fabrication, and/or higher cost. To address these issues, in this study, a low cost, biodegradable and human skin compatible antibacterial paper has been developed. A quaternary ammonium compound, benzalkonium chloride (BKC) has been used for paper surface treatment. The concentration of aqueous solution of BKC coated on paper was varied from 0.1 wt% to 0.2 wt%. No external binder was required for coating BKC onto paper. The efficacy of the coated paper was investigated against Staphylococcus aureus ATCC 6538 and Escherichia coli ATCC 8739 bacterial strains. This antibacterial paper is highly effective against both strains with the concentrations of BKC being within the allowable limit for cytotoxic effects. The optimum concentration of BKC coated on paper can be considered as 0.15 wt%, as nearly 100% inhibition was achieved with it against both strains. The developed antibacterial paper is suitable for being used in the industry for disinfection and food packaging purposes, and also by the public for hand sanitization. [ABSTRACT FROM AUTHOR]

This interdisciplinary meeting of 20 behavioral science and health researchers explored the connections among social risk theory, cultural constructions of health and risk, and spatial analysis of health. The purpose of the meeting was to establish common grounds for new interdisciplinary research proposals that bring together spatial analysis with work looking at perception of health risk. The agenda and position papers of papers of participants are presented in this document.

The assessment of MDRO infection and colonization should include the identification of known carriers, the detection of hospital-specific and healthcare-associated acquisition, an estimation of the burden of serious infection, an understanding of the reservoir affecting the transmission of MDROs, and an evaluation of the effect of intervention. Several strategies can be used to obtain data that aid in this assessment. We have defined and categorized the recommended metrics for each of these aspects of measuring MDRO infection and colonization, for use by healthcare facilities. © 2008 by The Society for Healthcare Epidemiology of America. All rights reserved.

Herein, we report results of the studies relating to the development of an impedimetric, magnetic bead-assisted supersandwich DNA hybridization assay for ultrasensitive detection of Neisseria gonorrhoeae, the causative agent of a sexually transmitted infection (STI), gonorrhea. First, a conductive ink was formulated by homogenously dispersing carboxylated multiwalled carbon nanotubes (cMWCNTs) in a stable emulsion of terpineol and an aqueous suspension of carboxymethyl cellulose (CMC). The ink, labeled C5, was coated onto paper substrates to fabricate C5@paper conductive electrodes. Thereafter, a magnetic bead (MB)-assisted supersandwich DNA hybridization assay was optimized against the porA pseudogene of N. gonorrhoeae. For this purpose, a pair of specific 5′ aminated capture probes (SCP) and supersandwich detector probes (SDP) was designed, which allowed the enrichment of target gonorrheal DNA sequence from a milieu of substances. The SD probe was designed such that instead of 1:1 binding, it allowed the binding of more than one T strand, leading to a 'ladder-like' DNA supersandwich structure. The MB-assisted supersandwich assay was integrated into the C5@paper electrodes for electrochemical analysis. The C5@paper electrodes were found to be highly conductive by a four-probe conductivity method (maximum conductivity of 10.1 S·cm−1). Further, the biosensing assay displayed a wide linear range of 100 aM-100 nM (109 orders of magnitude) with an excellent sensitivity of 22.6 kΩ·(log[concentration])−1. The clinical applicability of the biosensing assay was assessed by detecting genomic DNA extracted from N. gonorrhoeae in the presence of DNA from different non-gonorrheal bacterial species. In conclusion, this study demonstrates a highly sensitive, cost-effective, and label-free paper-based device for STI diagnostics. The ink formulation prepared for the study was found to be highly thixotropic, which indicates that the paper electrodes can be screen-printed in a reproducible and scalable manner. [ABSTRACT FROM AUTHOR]

Here we describe an ultra-low-cost origami-based approach for large-scale manufacturing of microscopes, specifically demonstrating brightfield, darkfield, and fluorescence microscopes. Merging principles of optical design with origami enables high-volume fabrication of microscopes from 2D media. Flexure mechanisms created via folding enable a flat compact design. Structural loops in folded paper provide kinematic constraints as a means for passive self-alignment. This light, rugged instrument can survive harsh field conditions while providing a diversity of imaging capabilities, thus serving wide-ranging applications for cost-effective, portable microscopes in science and education. [ABSTRACT FROM AUTHOR]

Recommended Revisions to the National SEP-1 Sepsis Quality Measure: A commentary by the Society of Infectious Diseases Pharmacists on the Infectious Diseases Society of America Position Paper Keywords: sepsis; infectious diseases; septic shock EN sepsis infectious diseases septic shock 368 371 4 04/14/20 20200401 NES 200401 Following recent revisions to the U.S. Centers for Medicare & Medicaid Services Sepsis and Septic Shock Early Management Bundle (SEP-1) reporting requirement, the Infectious Diseases Society of America (IDSA) led a group of invested stakeholder organizations to develop a position paper of recommended revisions to further improve SEP-1. In addition to these specific comments on the recommendations from IDSA, SIDP also recommends general improvements in broad-spectrum antibiotic administration in patients with septic shock. [Extracted from the article]

Pyocyanin is a toxin produced by Pseudomonas aeruginosa. Here we describe a novel paper-based electrochemical sensor for pyocyanin detection, manufactured with a simple and inexpensive approach based on electrode printing on paper. The resulting sensors constitute an effective electrochemical method to quantify pyocyanin in bacterial cultures without the conventional time consuming pretreatment of the samples. The electrochemical properties of the paper-based sensors were evaluated by ferri/ferrocyanide as a redox mediator, and showed reliable sensing performance. The paper-based sensors readily allow for the determination of pyocyanin in bacterial cultures with high reproducibility, achieving a limit of detection of 95 nM and a sensitivity of 4.30 μA/μM in standard culture media. Compared to the similar commercial ceramic based sensors, it is a 2.3-fold enhanced performance. The simple in-house fabrication of sensors for pyocyanin quantification allows researchers to understand in vitro adaptation of P. aeruginosa infections via rapid screenings of bacterial cultures that otherwise are expensive and time-consuming. [ABSTRACT FROM AUTHOR]

Pathogenic bacteria pose a serious threat to public health, and the rapid and cost-effective detection of such bacteria remains a major challenge. Herein, we present a DNAzyme-based fluorescent paper sensor for Klebsiella pneumoniae. The DNAzyme was generated by an in vitro selection technique to cleave a fluorogenic DNA-RNA chimeric substrate in the presence of K. pneumoniae. The DNAzyme was printed on a paper substrate in a 96-well format to serve as mix-and-read fluorescent assay that exhibits a limit of detection (LOD) 105  CFUs mL-1 . Evaluated with 20 strains of clinical bacterial isolates, the DNAzyme produced the desired fluorescence signal with the samples of K. pneumoniae, regardless of their source or drug resistance. The assay is simple to use, rapid, inexpensive, and avoids the complex procedures of sample preparation and equipment. We believe that this DNAzyme-based fluorescent assay has potential for practical applications to identify K. pneumoniae.

Background: Identification of the source of mosquito blood meals is an important component for disease control and surveillance. Recently, matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) profiling has emerged as an effective tool for mosquito blood meal identification, using the abdomens of freshly engorged mosquitoes. In the field, mosquito abdomens are crushed on Whatman filter papers to determine the host feeding patterns by identifying the origin of their blood meals. The aim of this study was to test whether crushing engorged mosquito abdomens on Whatman filter papers was compatible with MALDI-TOF MS for mosquito blood meal identification. Both laboratory reared and field collected mosquitoes were tested. Material and methods: Sixty Anopheles gambiae Giles were experimentally engorged on the blood of six distinct vertebrate hosts (human, sheep, rabbit, dog, chicken and rat). The engorged mosquito abdomens were crushed on Whatman filter papers for MALDI-TOF MS analysis. 150 Whatman filter papers, with mosquitoes engorged on cow and goat blood, were preserved. A total of 77 engorged mosquito abdomens collected in the Comoros Islands and crushed on Whatman filter papers were tested with MALDI-TOF MS. Results: The MS profiles generated from mosquito engorged abdomens crushed on Whatman filter papers exhibited high reproducibility according to the original host blood. The blood meal host was correctly identified from mosquito abdomens crushed on Whatman filter papers by MALDI-TOF MS. The MS spectra obtained after storage were stable regardless of the room temperature and whether or not they were frozen. The MS profiles were reproducible for up to three months. For the Comoros samples, 70/77 quality MS spectra were obtained and matched with human blood spectra. This was confirmed by molecular tools. Conclusion: The results demonstrated that MALDI-TOF MS could identify mosquito blood meals from Whatman filter papers collected in the field during entomological surveys. The application of MALDI-TOF MS has proved to be rapid and successful, making it a new and efficient tool for mosquito-borne disease surveillance. [ABSTRACT FROM AUTHOR]

India has the highest burden of Tuberculosis (TB) and multidrug-resistant TB (MDR-TB) worldwide. Innovative technology is the need of the hour to identify these cases that remain either undiagnosed or inadequately diagnosed due to the unavailability of appropriate tools at primary healthcare settings. We developed and evaluated 3 kits, namely ‘TB Detect’ (containing BioFM-Filter device), ‘TB Concentration and Transport’ (containing Trans-Filter device) and ‘TB DNA Extraction’ kits. These kits enable bio-safe equipment-free concentration of sputum on filters and improved fluorescence microscopy at primary healthcare centres, ambient temperature transport of dried inactivated sputum filters to central laboratories and molecular detection of drug resistance by PCR and DNA sequencing (Mol-DST). In a 2-site evaluation (n = 1190 sputum specimens) on presumptive TB patients, BioFM-Filter smear exhibited a significant increase in positivity of 7% and 4% over ZN smear and LED-FM smear (p<0.05), respectively and an increment in smear grade status (1+ or 2+ to 3+) of 16% over ZN smear and 20% over LED-FM smear. The sensitivity of Mol-DST in presumptive MDR-TB and XDR-TB cases (n = 148) was 90% for Rifampicin (95% confidence interval [CI], 78–96%), 84% for Isoniazid (95% CI, 72–92%), 83% for Fluoroquinolones (95% CI, 66–93%) and 75% for Aminoglycosides (95% CI, 35–97%), using phenotypic DST as the reference standard. Test specificity was 88–93% and concordance was ~89–92% (κ value 0.8–0.9). The patient-friendly kits described here address several of the existing challenges and are designed to provide ‘Universal Access’ to rapid TB diagnosis, including drug-resistant disease. Their utility was demonstrated by application to sputum at 2 sites in India. Our findings pave the way for larger studies in different point-of-care settings, including high-density urban areas and remote geographical locations. [ABSTRACT FROM AUTHOR]

As more HIV-infected people gain access to antiretroviral therapy (ART), monitoring HIV drug resistance (HIVDR) becomes essential to combat both acquired and transmitted HIVDR. Studies have demonstrated dried blood spots (DBS) are a suitable alternative in HIVDR monitoring using DBS collected on Whatman 903 (W-903). In this study, we sought to evaluate two other commercially available filter papers, Ahlstrom 226 (A-226) and Munktell TFN (M-TFN), for HIVDR genotyping following ambient temperature storage. DBS were prepared from remnant blood specimens collected from 334 ART patients and stored at ambient temperature for a median time of 30 days. HIV-1 viral load was determined using NucliSENS EasyQ® HIV-1 v2.0 RUO test kits prior to genotyping of the protease and reverse transcriptase regions of the HIV-1 pol gene using an in-house assay. Among the DBS tested, 26 specimens had a viral load ≥1000 copies/mL in all three types of filter paper and were included in the genotyping analysis. Genotyping efficiencies were similar between DBS collected on W-903 (92.3%), A-226 (88.5%), and M-TFN (92.3%) filter papers (P = 1.00). We identified 50 DR-associated mutations in DBS collected on W-903, 33 in DBS collected on A-226, and 48 in DBS collected on M-TFN, resulting in mutation detection sensitivities of 66.0% for A-226 and 88.0% for M-TFN when compared to W-903. Our data indicate that differences among filter papers may exist at this storage condition and warrant further studies evaluating filter paper type for HIVDR monitoring. [ABSTRACT FROM AUTHOR]