Search

Herein, the effects of Ni content on the microstructure, microhardness, and in‐site local corrosion behavior of laser‐welded joints in dual‐phase steel are investigated. The experimental results indicate that the microstructure of the fusion zone (FZ) changes from martensite to austenite as the Ni content increases. The FZ hardnesses of the 0Ni (no Ni foil addition) and 50Ni (50 μm Ni foil) welded joints are higher than that of the 100Ni (100 μm Ni foil) welded joints because of the austenite in the 100Ni welded joint. The welded joint without Ni shows severe pitting corrosion (more than 15 pitting sites in each zone of the welded joint) at the tested corrosion time. However, when immersed in the corrosion solution, the welded joints with added Ni exhibit slight pitting corrosion (less than five pitting sites). The Ni addition inhibits the pitting corrosion of the welded joints of high‐strength dual‐phase steel. [ABSTRACT FROM AUTHOR]

The corrosion behavior of low‐alloy steel exposed to saturated H2S solution is systematically studied using electron backscattered diffraction, scanning electron microscopy, X‐ray diffraction, X‐ray photoelectron spectroscopy, and electron probe microanalysis. The experimental results suggest that the corrosion rate decreases with prolonged immersion time because more corrosion products are formed on the steel surface. The corrosion products consist of mackinawite, greigite, and molybdenite regardless of the corrosion time. The structure of the corrosion products transforms from a single layer into two layers with increasing corrosion time. The Cr content in the corrosion products is similar to that in the steel substrate. The corrosion products are rich in molybdenum owing to the formation of molybdenite. [ABSTRACT FROM AUTHOR]