Search

Abstract: Sustainable low-energy office buildings attempt to harness the buildings architecture and physics to provide a high quality working environment with the least possible primary energy consumption. A promising approach to condition those buildings in summer employs the utilization of the building''s thermal storage activated by natural heat sinks (e.g., ambient air, ground water or soil) through night ventilation or thermally activated building systems (TABS). However, a certain room temperature cannot be guaranteed as occupants may influence the room energy balance by window opening, internal heat gains or sun shading control. Between 2001 and 2005, monitoring campaigns were carried out over 2 or 3 years in 12 low-energy office buildings which are located in three different summer climate zones in Germany. These climate zones are defined as summer-cool, moderate and summer-hot. The weather at the building site and the room temperatures in several office rooms were monitored by different scientific teams. The raw data are processed for data evaluation using a sophisticated method to remove errors and outliers from the database and to identify the time of occupancy. The comfort in all office rooms in each building is evaluated separately. For data presentation, these separate comfort votes per office room are averaged using the median instead of the arithmetic mean in order not to overestimate extremely cold or hot room temperatures. A comfort evaluation in these 12 low-energy office buildings indicates clearly, that buildings which use only natural heat sinks for cooling provide good thermal comfort during typical and warm summer periods in Germany. However, long heat waves such as during the extreme European summer of 2003 overstrain passively cooled buildings with air-driven cooling concepts in terms of thermal comfort. [Copyright &y& Elsevier]

Abstract: This study focuses on the impact of the meteorological environment and the building''s thermal inertia on the indoor temperature performance in a passively cooled office building with night ventilation. Data from a long-term monitoring campaign and short-term measurements are used to identify the correlation between outdoor and indoor temperature in a building under ordinary use and to derive the energy balance of an office room. Temperature performance and energy balance are merged in a comprehensive thermodynamic model, which takes steady-state conditions, short-term and long-term dynamics into account. In contrast to extensive simulation studies, the presented method is based on a straightforward mathematical model using Fourier analysis of temperature time series and an energy balance model, which focuses on fundamental information. [Copyright &y& Elsevier]

In moderate climates, one promising approach to reduce the energy demand of office buildings for air conditioning without reducing comfort is passive cooling by night ventilation. The office building of DB Netz AG in Hamm (Germany) has been designed, constructed and monitored for a long period in the framework of the German research programme, “Solar Optimised Buildings”, SolarBau for short. Monitored data of room and ceiling temperatures in 12 office rooms, supply air flow rate and temperature in these office rooms, electricity consumption for each office room, climate and air temperatures in an adjacent atrium are evaluated by a new method for analysis which deals with short-term and long-term measurements and building simulation. The monitored data from the office building, which is used as such, are complemented by information from the building management system about the position of louvers and the shading devices. The contribution of simulation tools to the design of buildings with passive cooling by night ventilation is evaluated by a comparison between monitored data and simulation for a long period. [Copyright &y& Elsevier]

In the residential sector, heat pumps are applied for domestic hot water and space heating. Simulations are widely used for general research in the field of heat pumps and to some extend to plan such installations. The advantages are low expenditure of time and costs compared to laboratory or field tests. Validation of simulation models is mandatory to guarantee a sufficient quality. In the presented paper, the field monitoring results of five ground-source installations are utilised for the validation of a black-box heat pump model. The model is similar to TRNSYS Type 201, but implemented in IDA ICE and then modified to handle the difficulties caused by non-standard mass flow and rampant polynomials. As overall result, deviations between 1% and 32% regarding modelled and measured efficiency are seen on monthly basis. The overall result appears as convincing, taking into account typical inaccuracies of laboratory and field tests as well as tolerances during heat pump production. As a side effect, the influence of standby consumption was quantified. For the five presented installations, standby amounts to fractions between 2 and 5% of the annual electricity consumption of the heat pump units. [ABSTRACT FROM AUTHOR]